459 lines
12 KiB
C
459 lines
12 KiB
C
/*
|
|
* PCIe host controller driver for Texas Instruments Keystone SoCs
|
|
*
|
|
* Copyright (C) 2013-2014 Texas Instruments., Ltd.
|
|
* http://www.ti.com
|
|
*
|
|
* Author: Murali Karicheri <m-karicheri2@ti.com>
|
|
* Implementation based on pci-exynos.c and pcie-designware.c
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/irqchip/chained_irq.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irqdomain.h>
|
|
#include <linux/init.h>
|
|
#include <linux/msi.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_pci.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/resource.h>
|
|
#include <linux/signal.h>
|
|
|
|
#include "pcie-designware.h"
|
|
#include "pci-keystone.h"
|
|
|
|
#define DRIVER_NAME "keystone-pcie"
|
|
|
|
/* driver specific constants */
|
|
#define MAX_MSI_HOST_IRQS 8
|
|
#define MAX_LEGACY_HOST_IRQS 4
|
|
|
|
/* DEV_STAT_CTRL */
|
|
#define PCIE_CAP_BASE 0x70
|
|
|
|
/* PCIE controller device IDs */
|
|
#define PCIE_RC_K2HK 0xb008
|
|
#define PCIE_RC_K2E 0xb009
|
|
#define PCIE_RC_K2L 0xb00a
|
|
|
|
#define to_keystone_pcie(x) dev_get_drvdata((x)->dev)
|
|
|
|
static void quirk_limit_mrrs(struct pci_dev *dev)
|
|
{
|
|
struct pci_bus *bus = dev->bus;
|
|
struct pci_dev *bridge = bus->self;
|
|
static const struct pci_device_id rc_pci_devids[] = {
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2HK),
|
|
.class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2E),
|
|
.class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
|
|
{ PCI_DEVICE(PCI_VENDOR_ID_TI, PCIE_RC_K2L),
|
|
.class = PCI_CLASS_BRIDGE_PCI << 8, .class_mask = ~0, },
|
|
{ 0, },
|
|
};
|
|
|
|
if (pci_is_root_bus(bus))
|
|
return;
|
|
|
|
/* look for the host bridge */
|
|
while (!pci_is_root_bus(bus)) {
|
|
bridge = bus->self;
|
|
bus = bus->parent;
|
|
}
|
|
|
|
if (bridge) {
|
|
/*
|
|
* Keystone PCI controller has a h/w limitation of
|
|
* 256 bytes maximum read request size. It can't handle
|
|
* anything higher than this. So force this limit on
|
|
* all downstream devices.
|
|
*/
|
|
if (pci_match_id(rc_pci_devids, bridge)) {
|
|
if (pcie_get_readrq(dev) > 256) {
|
|
dev_info(&dev->dev, "limiting MRRS to 256\n");
|
|
pcie_set_readrq(dev, 256);
|
|
}
|
|
}
|
|
}
|
|
}
|
|
DECLARE_PCI_FIXUP_ENABLE(PCI_ANY_ID, PCI_ANY_ID, quirk_limit_mrrs);
|
|
|
|
static int ks_pcie_establish_link(struct keystone_pcie *ks_pcie)
|
|
{
|
|
struct dw_pcie *pci = ks_pcie->pci;
|
|
struct pcie_port *pp = &pci->pp;
|
|
struct device *dev = pci->dev;
|
|
unsigned int retries;
|
|
|
|
dw_pcie_setup_rc(pp);
|
|
|
|
if (dw_pcie_link_up(pci)) {
|
|
dev_err(dev, "Link already up\n");
|
|
return 0;
|
|
}
|
|
|
|
/* check if the link is up or not */
|
|
for (retries = 0; retries < 5; retries++) {
|
|
ks_dw_pcie_initiate_link_train(ks_pcie);
|
|
if (!dw_pcie_wait_for_link(pci))
|
|
return 0;
|
|
}
|
|
|
|
dev_err(dev, "phy link never came up\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static void ks_pcie_msi_irq_handler(struct irq_desc *desc)
|
|
{
|
|
unsigned int irq = irq_desc_get_irq(desc);
|
|
struct keystone_pcie *ks_pcie = irq_desc_get_handler_data(desc);
|
|
u32 offset = irq - ks_pcie->msi_host_irqs[0];
|
|
struct dw_pcie *pci = ks_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
|
|
dev_dbg(dev, "%s, irq %d\n", __func__, irq);
|
|
|
|
/*
|
|
* The chained irq handler installation would have replaced normal
|
|
* interrupt driver handler so we need to take care of mask/unmask and
|
|
* ack operation.
|
|
*/
|
|
chained_irq_enter(chip, desc);
|
|
ks_dw_pcie_handle_msi_irq(ks_pcie, offset);
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
/**
|
|
* ks_pcie_legacy_irq_handler() - Handle legacy interrupt
|
|
* @irq: IRQ line for legacy interrupts
|
|
* @desc: Pointer to irq descriptor
|
|
*
|
|
* Traverse through pending legacy interrupts and invoke handler for each. Also
|
|
* takes care of interrupt controller level mask/ack operation.
|
|
*/
|
|
static void ks_pcie_legacy_irq_handler(struct irq_desc *desc)
|
|
{
|
|
unsigned int irq = irq_desc_get_irq(desc);
|
|
struct keystone_pcie *ks_pcie = irq_desc_get_handler_data(desc);
|
|
struct dw_pcie *pci = ks_pcie->pci;
|
|
struct device *dev = pci->dev;
|
|
u32 irq_offset = irq - ks_pcie->legacy_host_irqs[0];
|
|
struct irq_chip *chip = irq_desc_get_chip(desc);
|
|
|
|
dev_dbg(dev, ": Handling legacy irq %d\n", irq);
|
|
|
|
/*
|
|
* The chained irq handler installation would have replaced normal
|
|
* interrupt driver handler so we need to take care of mask/unmask and
|
|
* ack operation.
|
|
*/
|
|
chained_irq_enter(chip, desc);
|
|
ks_dw_pcie_handle_legacy_irq(ks_pcie, irq_offset);
|
|
chained_irq_exit(chip, desc);
|
|
}
|
|
|
|
static int ks_pcie_get_irq_controller_info(struct keystone_pcie *ks_pcie,
|
|
char *controller, int *num_irqs)
|
|
{
|
|
int temp, max_host_irqs, legacy = 1, *host_irqs;
|
|
struct device *dev = ks_pcie->pci->dev;
|
|
struct device_node *np_pcie = dev->of_node, **np_temp;
|
|
|
|
if (!strcmp(controller, "msi-interrupt-controller"))
|
|
legacy = 0;
|
|
|
|
if (legacy) {
|
|
np_temp = &ks_pcie->legacy_intc_np;
|
|
max_host_irqs = MAX_LEGACY_HOST_IRQS;
|
|
host_irqs = &ks_pcie->legacy_host_irqs[0];
|
|
} else {
|
|
np_temp = &ks_pcie->msi_intc_np;
|
|
max_host_irqs = MAX_MSI_HOST_IRQS;
|
|
host_irqs = &ks_pcie->msi_host_irqs[0];
|
|
}
|
|
|
|
/* interrupt controller is in a child node */
|
|
*np_temp = of_find_node_by_name(np_pcie, controller);
|
|
if (!(*np_temp)) {
|
|
dev_err(dev, "Node for %s is absent\n", controller);
|
|
return -EINVAL;
|
|
}
|
|
|
|
temp = of_irq_count(*np_temp);
|
|
if (!temp) {
|
|
dev_err(dev, "No IRQ entries in %s\n", controller);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (temp > max_host_irqs)
|
|
dev_warn(dev, "Too many %s interrupts defined %u\n",
|
|
(legacy ? "legacy" : "MSI"), temp);
|
|
|
|
/*
|
|
* support upto max_host_irqs. In dt from index 0 to 3 (legacy) or 0 to
|
|
* 7 (MSI)
|
|
*/
|
|
for (temp = 0; temp < max_host_irqs; temp++) {
|
|
host_irqs[temp] = irq_of_parse_and_map(*np_temp, temp);
|
|
if (!host_irqs[temp])
|
|
break;
|
|
}
|
|
|
|
if (temp) {
|
|
*num_irqs = temp;
|
|
return 0;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static void ks_pcie_setup_interrupts(struct keystone_pcie *ks_pcie)
|
|
{
|
|
int i;
|
|
|
|
/* Legacy IRQ */
|
|
for (i = 0; i < ks_pcie->num_legacy_host_irqs; i++) {
|
|
irq_set_chained_handler_and_data(ks_pcie->legacy_host_irqs[i],
|
|
ks_pcie_legacy_irq_handler,
|
|
ks_pcie);
|
|
}
|
|
ks_dw_pcie_enable_legacy_irqs(ks_pcie);
|
|
|
|
/* MSI IRQ */
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
for (i = 0; i < ks_pcie->num_msi_host_irqs; i++) {
|
|
irq_set_chained_handler_and_data(ks_pcie->msi_host_irqs[i],
|
|
ks_pcie_msi_irq_handler,
|
|
ks_pcie);
|
|
}
|
|
}
|
|
|
|
if (ks_pcie->error_irq > 0)
|
|
ks_dw_pcie_enable_error_irq(ks_pcie);
|
|
}
|
|
|
|
/*
|
|
* When a PCI device does not exist during config cycles, keystone host gets a
|
|
* bus error instead of returning 0xffffffff. This handler always returns 0
|
|
* for this kind of faults.
|
|
*/
|
|
static int keystone_pcie_fault(unsigned long addr, unsigned int fsr,
|
|
struct pt_regs *regs)
|
|
{
|
|
unsigned long instr = *(unsigned long *) instruction_pointer(regs);
|
|
|
|
if ((instr & 0x0e100090) == 0x00100090) {
|
|
int reg = (instr >> 12) & 15;
|
|
|
|
regs->uregs[reg] = -1;
|
|
regs->ARM_pc += 4;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __init ks_pcie_host_init(struct pcie_port *pp)
|
|
{
|
|
struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
|
|
struct keystone_pcie *ks_pcie = to_keystone_pcie(pci);
|
|
u32 val;
|
|
|
|
ks_pcie_establish_link(ks_pcie);
|
|
ks_dw_pcie_setup_rc_app_regs(ks_pcie);
|
|
ks_pcie_setup_interrupts(ks_pcie);
|
|
writew(PCI_IO_RANGE_TYPE_32 | (PCI_IO_RANGE_TYPE_32 << 8),
|
|
pci->dbi_base + PCI_IO_BASE);
|
|
|
|
/* update the Vendor ID */
|
|
writew(ks_pcie->device_id, pci->dbi_base + PCI_DEVICE_ID);
|
|
|
|
/* update the DEV_STAT_CTRL to publish right mrrs */
|
|
val = readl(pci->dbi_base + PCIE_CAP_BASE + PCI_EXP_DEVCTL);
|
|
val &= ~PCI_EXP_DEVCTL_READRQ;
|
|
/* set the mrrs to 256 bytes */
|
|
val |= BIT(12);
|
|
writel(val, pci->dbi_base + PCIE_CAP_BASE + PCI_EXP_DEVCTL);
|
|
|
|
/*
|
|
* PCIe access errors that result into OCP errors are caught by ARM as
|
|
* "External aborts"
|
|
*/
|
|
hook_fault_code(17, keystone_pcie_fault, SIGBUS, 0,
|
|
"Asynchronous external abort");
|
|
}
|
|
|
|
static struct dw_pcie_host_ops keystone_pcie_host_ops = {
|
|
.rd_other_conf = ks_dw_pcie_rd_other_conf,
|
|
.wr_other_conf = ks_dw_pcie_wr_other_conf,
|
|
.host_init = ks_pcie_host_init,
|
|
.msi_set_irq = ks_dw_pcie_msi_set_irq,
|
|
.msi_clear_irq = ks_dw_pcie_msi_clear_irq,
|
|
.get_msi_addr = ks_dw_pcie_get_msi_addr,
|
|
.msi_host_init = ks_dw_pcie_msi_host_init,
|
|
.scan_bus = ks_dw_pcie_v3_65_scan_bus,
|
|
};
|
|
|
|
static irqreturn_t pcie_err_irq_handler(int irq, void *priv)
|
|
{
|
|
struct keystone_pcie *ks_pcie = priv;
|
|
|
|
return ks_dw_pcie_handle_error_irq(ks_pcie);
|
|
}
|
|
|
|
static int __init ks_add_pcie_port(struct keystone_pcie *ks_pcie,
|
|
struct platform_device *pdev)
|
|
{
|
|
struct dw_pcie *pci = ks_pcie->pci;
|
|
struct pcie_port *pp = &pci->pp;
|
|
struct device *dev = &pdev->dev;
|
|
int ret;
|
|
|
|
ret = ks_pcie_get_irq_controller_info(ks_pcie,
|
|
"legacy-interrupt-controller",
|
|
&ks_pcie->num_legacy_host_irqs);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (IS_ENABLED(CONFIG_PCI_MSI)) {
|
|
ret = ks_pcie_get_irq_controller_info(ks_pcie,
|
|
"msi-interrupt-controller",
|
|
&ks_pcie->num_msi_host_irqs);
|
|
if (ret)
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* Index 0 is the platform interrupt for error interrupt
|
|
* from RC. This is optional.
|
|
*/
|
|
ks_pcie->error_irq = irq_of_parse_and_map(ks_pcie->np, 0);
|
|
if (ks_pcie->error_irq <= 0)
|
|
dev_info(dev, "no error IRQ defined\n");
|
|
else {
|
|
ret = request_irq(ks_pcie->error_irq, pcie_err_irq_handler,
|
|
IRQF_SHARED, "pcie-error-irq", ks_pcie);
|
|
if (ret < 0) {
|
|
dev_err(dev, "failed to request error IRQ %d\n",
|
|
ks_pcie->error_irq);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
pp->root_bus_nr = -1;
|
|
pp->ops = &keystone_pcie_host_ops;
|
|
ret = ks_dw_pcie_host_init(ks_pcie, ks_pcie->msi_intc_np);
|
|
if (ret) {
|
|
dev_err(dev, "failed to initialize host\n");
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id ks_pcie_of_match[] = {
|
|
{
|
|
.type = "pci",
|
|
.compatible = "ti,keystone-pcie",
|
|
},
|
|
{ },
|
|
};
|
|
|
|
static const struct dw_pcie_ops dw_pcie_ops = {
|
|
.link_up = ks_dw_pcie_link_up,
|
|
};
|
|
|
|
static int __exit ks_pcie_remove(struct platform_device *pdev)
|
|
{
|
|
struct keystone_pcie *ks_pcie = platform_get_drvdata(pdev);
|
|
|
|
clk_disable_unprepare(ks_pcie->clk);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __init ks_pcie_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct dw_pcie *pci;
|
|
struct keystone_pcie *ks_pcie;
|
|
struct resource *res;
|
|
void __iomem *reg_p;
|
|
struct phy *phy;
|
|
int ret;
|
|
|
|
ks_pcie = devm_kzalloc(dev, sizeof(*ks_pcie), GFP_KERNEL);
|
|
if (!ks_pcie)
|
|
return -ENOMEM;
|
|
|
|
pci = devm_kzalloc(dev, sizeof(*pci), GFP_KERNEL);
|
|
if (!pci)
|
|
return -ENOMEM;
|
|
|
|
pci->dev = dev;
|
|
pci->ops = &dw_pcie_ops;
|
|
|
|
ks_pcie->pci = pci;
|
|
|
|
/* initialize SerDes Phy if present */
|
|
phy = devm_phy_get(dev, "pcie-phy");
|
|
if (PTR_ERR_OR_ZERO(phy) == -EPROBE_DEFER)
|
|
return PTR_ERR(phy);
|
|
|
|
if (!IS_ERR_OR_NULL(phy)) {
|
|
ret = phy_init(phy);
|
|
if (ret < 0)
|
|
return ret;
|
|
}
|
|
|
|
/* index 2 is to read PCI DEVICE_ID */
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
|
|
reg_p = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(reg_p))
|
|
return PTR_ERR(reg_p);
|
|
ks_pcie->device_id = readl(reg_p) >> 16;
|
|
devm_iounmap(dev, reg_p);
|
|
devm_release_mem_region(dev, res->start, resource_size(res));
|
|
|
|
ks_pcie->np = dev->of_node;
|
|
platform_set_drvdata(pdev, ks_pcie);
|
|
ks_pcie->clk = devm_clk_get(dev, "pcie");
|
|
if (IS_ERR(ks_pcie->clk)) {
|
|
dev_err(dev, "Failed to get pcie rc clock\n");
|
|
return PTR_ERR(ks_pcie->clk);
|
|
}
|
|
ret = clk_prepare_enable(ks_pcie->clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
platform_set_drvdata(pdev, ks_pcie);
|
|
|
|
ret = ks_add_pcie_port(ks_pcie, pdev);
|
|
if (ret < 0)
|
|
goto fail_clk;
|
|
|
|
return 0;
|
|
fail_clk:
|
|
clk_disable_unprepare(ks_pcie->clk);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static struct platform_driver ks_pcie_driver __refdata = {
|
|
.probe = ks_pcie_probe,
|
|
.remove = __exit_p(ks_pcie_remove),
|
|
.driver = {
|
|
.name = "keystone-pcie",
|
|
.of_match_table = of_match_ptr(ks_pcie_of_match),
|
|
},
|
|
};
|
|
builtin_platform_driver(ks_pcie_driver);
|