OpenCloudOS-Kernel/drivers/usb
Alan Stern 5e6effaed6 USB: make USB-PERSIST work after every system sleep
This patch (as1046) makes USB-PERSIST work more in accordance with
the documentation.  Currently it takes effect only in cases where the
root hub has lost power or been reset, but it is supposed to operate
whenever a power session was dropped during a system sleep.

A new hub_restart() routine carries out the duties required during a
reset or a reset-resume.  It checks to see whether occupied ports are
still enabled, and if they aren't then it clears the enable-change and
connect-change features (to prevent interference by khubd) and sets
the child device's reset_resume flag.  It also checks ports that are
supposed to be unoccupied to verify that the firmware hasn't left the
port in an enabled state.

Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-24 21:16:32 -07:00
..
atm drivers: Remove unnecessary inclusions of asm/semaphore.h 2008-04-18 22:16:32 -04:00
class USB: fix usb open suspend race in cdc-acm 2008-02-21 15:38:49 -08:00
core USB: make USB-PERSIST work after every system sleep 2008-04-24 21:16:32 -07:00
gadget Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/hskinnemoen/usba-2.6.26 into base 2008-04-19 20:38:41 -04:00
host USB: EHCI: carry out port handover during each root-hub resume 2008-04-24 21:16:32 -07:00
image USB: Drop unnecessary continue in a few drivers 2008-02-01 14:34:51 -08:00
misc drivers: Remove unnecessary inclusions of asm/semaphore.h 2008-04-18 22:16:32 -04:00
mon USB: Fix memory leak in mon_stat_release 2008-04-24 21:16:32 -07:00
serial USB: Add HP hs2300 Broadband Wireless Module to sierra.c 2008-04-24 21:16:32 -07:00
storage USB: support more Huawei data card product IDs 2008-04-15 22:30:52 -07:00
Kconfig USB: add support for SuperH OHCI 2008-02-01 14:35:03 -08:00
Makefile USB: always visit drivers/usb/misc/ 2007-10-12 14:55:26 -07:00
README USB: fix directory references in usb/README 2007-11-28 13:58:34 -08:00
usb-skeleton.c USB: usb-skeleton leaking locks on open 2007-10-12 14:55:26 -07:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.