719 lines
19 KiB
C
719 lines
19 KiB
C
/*
|
|
* Copyright 2005-2009 MontaVista Software, Inc.
|
|
* Copyright 2008,2012,2015 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
|
|
* or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
|
|
* for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software Foundation,
|
|
* Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
|
|
*
|
|
* Ported to 834x by Randy Vinson <rvinson@mvista.com> using code provided
|
|
* by Hunter Wu.
|
|
* Power Management support by Dave Liu <daveliu@freescale.com>,
|
|
* Jerry Huang <Chang-Ming.Huang@freescale.com> and
|
|
* Anton Vorontsov <avorontsov@ru.mvista.com>.
|
|
*/
|
|
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/pm.h>
|
|
#include <linux/err.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/ehci_def.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/fsl_devices.h>
|
|
#include <linux/of_platform.h>
|
|
|
|
#include "ehci.h"
|
|
#include "ehci-fsl.h"
|
|
|
|
#define DRIVER_DESC "Freescale EHCI Host controller driver"
|
|
#define DRV_NAME "ehci-fsl"
|
|
|
|
static struct hc_driver __read_mostly fsl_ehci_hc_driver;
|
|
|
|
/* configure so an HC device and id are always provided */
|
|
/* always called with process context; sleeping is OK */
|
|
|
|
/*
|
|
* fsl_ehci_drv_probe - initialize FSL-based HCDs
|
|
* @pdev: USB Host Controller being probed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Allocates basic resources for this USB host controller.
|
|
*
|
|
*/
|
|
static int fsl_ehci_drv_probe(struct platform_device *pdev)
|
|
{
|
|
struct fsl_usb2_platform_data *pdata;
|
|
struct usb_hcd *hcd;
|
|
struct resource *res;
|
|
int irq;
|
|
int retval;
|
|
|
|
pr_debug("initializing FSL-SOC USB Controller\n");
|
|
|
|
/* Need platform data for setup */
|
|
pdata = dev_get_platdata(&pdev->dev);
|
|
if (!pdata) {
|
|
dev_err(&pdev->dev,
|
|
"No platform data for %s.\n", dev_name(&pdev->dev));
|
|
return -ENODEV;
|
|
}
|
|
|
|
/*
|
|
* This is a host mode driver, verify that we're supposed to be
|
|
* in host mode.
|
|
*/
|
|
if (!((pdata->operating_mode == FSL_USB2_DR_HOST) ||
|
|
(pdata->operating_mode == FSL_USB2_MPH_HOST) ||
|
|
(pdata->operating_mode == FSL_USB2_DR_OTG))) {
|
|
dev_err(&pdev->dev,
|
|
"Non Host Mode configured for %s. Wrong driver linked.\n",
|
|
dev_name(&pdev->dev));
|
|
return -ENODEV;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
|
|
if (!res) {
|
|
dev_err(&pdev->dev,
|
|
"Found HC with no IRQ. Check %s setup!\n",
|
|
dev_name(&pdev->dev));
|
|
return -ENODEV;
|
|
}
|
|
irq = res->start;
|
|
|
|
hcd = usb_create_hcd(&fsl_ehci_hc_driver, &pdev->dev,
|
|
dev_name(&pdev->dev));
|
|
if (!hcd) {
|
|
retval = -ENOMEM;
|
|
goto err1;
|
|
}
|
|
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
hcd->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(hcd->regs)) {
|
|
retval = PTR_ERR(hcd->regs);
|
|
goto err2;
|
|
}
|
|
|
|
hcd->rsrc_start = res->start;
|
|
hcd->rsrc_len = resource_size(res);
|
|
|
|
pdata->regs = hcd->regs;
|
|
|
|
if (pdata->power_budget)
|
|
hcd->power_budget = pdata->power_budget;
|
|
|
|
/*
|
|
* do platform specific init: check the clock, grab/config pins, etc.
|
|
*/
|
|
if (pdata->init && pdata->init(pdev)) {
|
|
retval = -ENODEV;
|
|
goto err2;
|
|
}
|
|
|
|
/* Enable USB controller, 83xx or 8536 */
|
|
if (pdata->have_sysif_regs && pdata->controller_ver < FSL_USB_VER_1_6)
|
|
clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK, 0x4);
|
|
|
|
/*
|
|
* Enable UTMI phy and program PTS field in UTMI mode before asserting
|
|
* controller reset for USB Controller version 2.5
|
|
*/
|
|
if (pdata->has_fsl_erratum_a007792) {
|
|
clrsetbits_be32(hcd->regs + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK, CTRL_UTMI_PHY_EN);
|
|
writel(PORT_PTS_UTMI, hcd->regs + FSL_SOC_USB_PORTSC1);
|
|
}
|
|
|
|
/* Don't need to set host mode here. It will be done by tdi_reset() */
|
|
|
|
retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
|
|
if (retval != 0)
|
|
goto err2;
|
|
device_wakeup_enable(hcd->self.controller);
|
|
|
|
#ifdef CONFIG_USB_OTG
|
|
if (pdata->operating_mode == FSL_USB2_DR_OTG) {
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
|
|
hcd->usb_phy = usb_get_phy(USB_PHY_TYPE_USB2);
|
|
dev_dbg(&pdev->dev, "hcd=0x%p ehci=0x%p, phy=0x%p\n",
|
|
hcd, ehci, hcd->usb_phy);
|
|
|
|
if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
|
|
retval = otg_set_host(hcd->usb_phy->otg,
|
|
&ehci_to_hcd(ehci)->self);
|
|
if (retval) {
|
|
usb_put_phy(hcd->usb_phy);
|
|
goto err2;
|
|
}
|
|
} else {
|
|
dev_err(&pdev->dev, "can't find phy\n");
|
|
retval = -ENODEV;
|
|
goto err2;
|
|
}
|
|
}
|
|
#endif
|
|
return retval;
|
|
|
|
err2:
|
|
usb_put_hcd(hcd);
|
|
err1:
|
|
dev_err(&pdev->dev, "init %s fail, %d\n", dev_name(&pdev->dev), retval);
|
|
if (pdata->exit)
|
|
pdata->exit(pdev);
|
|
return retval;
|
|
}
|
|
|
|
static int ehci_fsl_setup_phy(struct usb_hcd *hcd,
|
|
enum fsl_usb2_phy_modes phy_mode,
|
|
unsigned int port_offset)
|
|
{
|
|
u32 portsc;
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
void __iomem *non_ehci = hcd->regs;
|
|
struct device *dev = hcd->self.controller;
|
|
struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
|
|
|
|
if (pdata->controller_ver < 0) {
|
|
dev_warn(hcd->self.controller, "Could not get controller version\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
portsc = ehci_readl(ehci, &ehci->regs->port_status[port_offset]);
|
|
portsc &= ~(PORT_PTS_MSK | PORT_PTS_PTW);
|
|
|
|
switch (phy_mode) {
|
|
case FSL_USB2_PHY_ULPI:
|
|
if (pdata->have_sysif_regs && pdata->controller_ver) {
|
|
/* controller version 1.6 or above */
|
|
clrbits32(non_ehci + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK | UTMI_PHY_EN);
|
|
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK,
|
|
ULPI_PHY_CLK_SEL | USB_CTRL_USB_EN);
|
|
}
|
|
portsc |= PORT_PTS_ULPI;
|
|
break;
|
|
case FSL_USB2_PHY_SERIAL:
|
|
portsc |= PORT_PTS_SERIAL;
|
|
break;
|
|
case FSL_USB2_PHY_UTMI_WIDE:
|
|
portsc |= PORT_PTS_PTW;
|
|
/* fall through */
|
|
case FSL_USB2_PHY_UTMI:
|
|
case FSL_USB2_PHY_UTMI_DUAL:
|
|
if (pdata->have_sysif_regs && pdata->controller_ver) {
|
|
/* controller version 1.6 or above */
|
|
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK, UTMI_PHY_EN);
|
|
mdelay(FSL_UTMI_PHY_DLY); /* Delay for UTMI PHY CLK to
|
|
become stable - 10ms*/
|
|
}
|
|
/* enable UTMI PHY */
|
|
if (pdata->have_sysif_regs)
|
|
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK,
|
|
CTRL_UTMI_PHY_EN);
|
|
portsc |= PORT_PTS_UTMI;
|
|
break;
|
|
case FSL_USB2_PHY_NONE:
|
|
break;
|
|
}
|
|
|
|
/*
|
|
* check PHY_CLK_VALID to determine phy clock presence before writing
|
|
* to portsc
|
|
*/
|
|
if (pdata->check_phy_clk_valid) {
|
|
if (!(ioread32be(non_ehci + FSL_SOC_USB_CTRL) &
|
|
PHY_CLK_VALID)) {
|
|
dev_warn(hcd->self.controller,
|
|
"USB PHY clock invalid\n");
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
ehci_writel(ehci, portsc, &ehci->regs->port_status[port_offset]);
|
|
|
|
if (phy_mode != FSL_USB2_PHY_ULPI && pdata->have_sysif_regs)
|
|
clrsetbits_be32(non_ehci + FSL_SOC_USB_CTRL,
|
|
CONTROL_REGISTER_W1C_MASK, USB_CTRL_USB_EN);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
|
|
{
|
|
struct usb_hcd *hcd = ehci_to_hcd(ehci);
|
|
struct fsl_usb2_platform_data *pdata;
|
|
void __iomem *non_ehci = hcd->regs;
|
|
|
|
pdata = dev_get_platdata(hcd->self.controller);
|
|
|
|
if (pdata->have_sysif_regs) {
|
|
/*
|
|
* Turn on cache snooping hardware, since some PowerPC platforms
|
|
* wholly rely on hardware to deal with cache coherent
|
|
*/
|
|
|
|
/* Setup Snooping for all the 4GB space */
|
|
/* SNOOP1 starts from 0x0, size 2G */
|
|
iowrite32be(0x0 | SNOOP_SIZE_2GB,
|
|
non_ehci + FSL_SOC_USB_SNOOP1);
|
|
/* SNOOP2 starts from 0x80000000, size 2G */
|
|
iowrite32be(0x80000000 | SNOOP_SIZE_2GB,
|
|
non_ehci + FSL_SOC_USB_SNOOP2);
|
|
}
|
|
|
|
/* Deal with USB erratum A-005275 */
|
|
if (pdata->has_fsl_erratum_a005275 == 1)
|
|
ehci->has_fsl_hs_errata = 1;
|
|
|
|
if (pdata->has_fsl_erratum_a005697 == 1)
|
|
ehci->has_fsl_susp_errata = 1;
|
|
|
|
if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
|
|
(pdata->operating_mode == FSL_USB2_DR_OTG))
|
|
if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
|
|
return -EINVAL;
|
|
|
|
if (pdata->operating_mode == FSL_USB2_MPH_HOST) {
|
|
unsigned int chip, rev, svr;
|
|
|
|
svr = mfspr(SPRN_SVR);
|
|
chip = svr >> 16;
|
|
rev = (svr >> 4) & 0xf;
|
|
|
|
/* Deal with USB Erratum #14 on MPC834x Rev 1.0 & 1.1 chips */
|
|
if ((rev == 1) && (chip >= 0x8050) && (chip <= 0x8055))
|
|
ehci->has_fsl_port_bug = 1;
|
|
|
|
if (pdata->port_enables & FSL_USB2_PORT0_ENABLED)
|
|
if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 0))
|
|
return -EINVAL;
|
|
|
|
if (pdata->port_enables & FSL_USB2_PORT1_ENABLED)
|
|
if (ehci_fsl_setup_phy(hcd, pdata->phy_mode, 1))
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (pdata->have_sysif_regs) {
|
|
#ifdef CONFIG_FSL_SOC_BOOKE
|
|
iowrite32be(0x00000008, non_ehci + FSL_SOC_USB_PRICTRL);
|
|
iowrite32be(0x00000080, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
|
|
#else
|
|
iowrite32be(0x0000000c, non_ehci + FSL_SOC_USB_PRICTRL);
|
|
iowrite32be(0x00000040, non_ehci + FSL_SOC_USB_AGECNTTHRSH);
|
|
#endif
|
|
iowrite32be(0x00000001, non_ehci + FSL_SOC_USB_SICTRL);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* called after powerup, by probe or system-pm "wakeup" */
|
|
static int ehci_fsl_reinit(struct ehci_hcd *ehci)
|
|
{
|
|
if (ehci_fsl_usb_setup(ehci))
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* called during probe() after chip reset completes */
|
|
static int ehci_fsl_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
int retval;
|
|
struct fsl_usb2_platform_data *pdata;
|
|
struct device *dev;
|
|
|
|
dev = hcd->self.controller;
|
|
pdata = dev_get_platdata(hcd->self.controller);
|
|
ehci->big_endian_desc = pdata->big_endian_desc;
|
|
ehci->big_endian_mmio = pdata->big_endian_mmio;
|
|
|
|
/* EHCI registers start at offset 0x100 */
|
|
ehci->caps = hcd->regs + 0x100;
|
|
|
|
#ifdef CONFIG_PPC_83xx
|
|
/*
|
|
* Deal with MPC834X that need port power to be cycled after the power
|
|
* fault condition is removed. Otherwise the state machine does not
|
|
* reflect PORTSC[CSC] correctly.
|
|
*/
|
|
ehci->need_oc_pp_cycle = 1;
|
|
#endif
|
|
|
|
hcd->has_tt = 1;
|
|
|
|
retval = ehci_setup(hcd);
|
|
if (retval)
|
|
return retval;
|
|
|
|
if (of_device_is_compatible(dev->parent->of_node,
|
|
"fsl,mpc5121-usb2-dr")) {
|
|
/*
|
|
* set SBUSCFG:AHBBRST so that control msgs don't
|
|
* fail when doing heavy PATA writes.
|
|
*/
|
|
ehci_writel(ehci, SBUSCFG_INCR8,
|
|
hcd->regs + FSL_SOC_USB_SBUSCFG);
|
|
}
|
|
|
|
retval = ehci_fsl_reinit(ehci);
|
|
return retval;
|
|
}
|
|
|
|
struct ehci_fsl {
|
|
struct ehci_hcd ehci;
|
|
|
|
#ifdef CONFIG_PM
|
|
/* Saved USB PHY settings, need to restore after deep sleep. */
|
|
u32 usb_ctrl;
|
|
#endif
|
|
};
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
#ifdef CONFIG_PPC_MPC512x
|
|
static int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
|
|
u32 tmp;
|
|
|
|
#ifdef CONFIG_DYNAMIC_DEBUG
|
|
u32 mode = ehci_readl(ehci, hcd->regs + FSL_SOC_USB_USBMODE);
|
|
mode &= USBMODE_CM_MASK;
|
|
tmp = ehci_readl(ehci, hcd->regs + 0x140); /* usbcmd */
|
|
|
|
dev_dbg(dev, "suspend=%d already_suspended=%d "
|
|
"mode=%d usbcmd %08x\n", pdata->suspended,
|
|
pdata->already_suspended, mode, tmp);
|
|
#endif
|
|
|
|
/*
|
|
* If the controller is already suspended, then this must be a
|
|
* PM suspend. Remember this fact, so that we will leave the
|
|
* controller suspended at PM resume time.
|
|
*/
|
|
if (pdata->suspended) {
|
|
dev_dbg(dev, "already suspended, leaving early\n");
|
|
pdata->already_suspended = 1;
|
|
return 0;
|
|
}
|
|
|
|
dev_dbg(dev, "suspending...\n");
|
|
|
|
ehci->rh_state = EHCI_RH_SUSPENDED;
|
|
dev->power.power_state = PMSG_SUSPEND;
|
|
|
|
/* ignore non-host interrupts */
|
|
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
|
|
/* stop the controller */
|
|
tmp = ehci_readl(ehci, &ehci->regs->command);
|
|
tmp &= ~CMD_RUN;
|
|
ehci_writel(ehci, tmp, &ehci->regs->command);
|
|
|
|
/* save EHCI registers */
|
|
pdata->pm_command = ehci_readl(ehci, &ehci->regs->command);
|
|
pdata->pm_command &= ~CMD_RUN;
|
|
pdata->pm_status = ehci_readl(ehci, &ehci->regs->status);
|
|
pdata->pm_intr_enable = ehci_readl(ehci, &ehci->regs->intr_enable);
|
|
pdata->pm_frame_index = ehci_readl(ehci, &ehci->regs->frame_index);
|
|
pdata->pm_segment = ehci_readl(ehci, &ehci->regs->segment);
|
|
pdata->pm_frame_list = ehci_readl(ehci, &ehci->regs->frame_list);
|
|
pdata->pm_async_next = ehci_readl(ehci, &ehci->regs->async_next);
|
|
pdata->pm_configured_flag =
|
|
ehci_readl(ehci, &ehci->regs->configured_flag);
|
|
pdata->pm_portsc = ehci_readl(ehci, &ehci->regs->port_status[0]);
|
|
pdata->pm_usbgenctrl = ehci_readl(ehci,
|
|
hcd->regs + FSL_SOC_USB_USBGENCTRL);
|
|
|
|
/* clear the W1C bits */
|
|
pdata->pm_portsc &= cpu_to_hc32(ehci, ~PORT_RWC_BITS);
|
|
|
|
pdata->suspended = 1;
|
|
|
|
/* clear PP to cut power to the port */
|
|
tmp = ehci_readl(ehci, &ehci->regs->port_status[0]);
|
|
tmp &= ~PORT_POWER;
|
|
ehci_writel(ehci, tmp, &ehci->regs->port_status[0]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ehci_fsl_mpc512x_drv_resume(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
struct fsl_usb2_platform_data *pdata = dev_get_platdata(dev);
|
|
u32 tmp;
|
|
|
|
dev_dbg(dev, "suspend=%d already_suspended=%d\n",
|
|
pdata->suspended, pdata->already_suspended);
|
|
|
|
/*
|
|
* If the controller was already suspended at suspend time,
|
|
* then don't resume it now.
|
|
*/
|
|
if (pdata->already_suspended) {
|
|
dev_dbg(dev, "already suspended, leaving early\n");
|
|
pdata->already_suspended = 0;
|
|
return 0;
|
|
}
|
|
|
|
if (!pdata->suspended) {
|
|
dev_dbg(dev, "not suspended, leaving early\n");
|
|
return 0;
|
|
}
|
|
|
|
pdata->suspended = 0;
|
|
|
|
dev_dbg(dev, "resuming...\n");
|
|
|
|
/* set host mode */
|
|
tmp = USBMODE_CM_HOST | (pdata->es ? USBMODE_ES : 0);
|
|
ehci_writel(ehci, tmp, hcd->regs + FSL_SOC_USB_USBMODE);
|
|
|
|
ehci_writel(ehci, pdata->pm_usbgenctrl,
|
|
hcd->regs + FSL_SOC_USB_USBGENCTRL);
|
|
ehci_writel(ehci, ISIPHYCTRL_PXE | ISIPHYCTRL_PHYE,
|
|
hcd->regs + FSL_SOC_USB_ISIPHYCTRL);
|
|
|
|
ehci_writel(ehci, SBUSCFG_INCR8, hcd->regs + FSL_SOC_USB_SBUSCFG);
|
|
|
|
/* restore EHCI registers */
|
|
ehci_writel(ehci, pdata->pm_command, &ehci->regs->command);
|
|
ehci_writel(ehci, pdata->pm_intr_enable, &ehci->regs->intr_enable);
|
|
ehci_writel(ehci, pdata->pm_frame_index, &ehci->regs->frame_index);
|
|
ehci_writel(ehci, pdata->pm_segment, &ehci->regs->segment);
|
|
ehci_writel(ehci, pdata->pm_frame_list, &ehci->regs->frame_list);
|
|
ehci_writel(ehci, pdata->pm_async_next, &ehci->regs->async_next);
|
|
ehci_writel(ehci, pdata->pm_configured_flag,
|
|
&ehci->regs->configured_flag);
|
|
ehci_writel(ehci, pdata->pm_portsc, &ehci->regs->port_status[0]);
|
|
|
|
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
ehci->rh_state = EHCI_RH_RUNNING;
|
|
dev->power.power_state = PMSG_ON;
|
|
|
|
tmp = ehci_readl(ehci, &ehci->regs->command);
|
|
tmp |= CMD_RUN;
|
|
ehci_writel(ehci, tmp, &ehci->regs->command);
|
|
|
|
usb_hcd_resume_root_hub(hcd);
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static inline int ehci_fsl_mpc512x_drv_suspend(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline int ehci_fsl_mpc512x_drv_resume(struct device *dev)
|
|
{
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PPC_MPC512x */
|
|
|
|
static struct ehci_fsl *hcd_to_ehci_fsl(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
|
|
return container_of(ehci, struct ehci_fsl, ehci);
|
|
}
|
|
|
|
static int ehci_fsl_drv_suspend(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
|
|
void __iomem *non_ehci = hcd->regs;
|
|
|
|
if (of_device_is_compatible(dev->parent->of_node,
|
|
"fsl,mpc5121-usb2-dr")) {
|
|
return ehci_fsl_mpc512x_drv_suspend(dev);
|
|
}
|
|
|
|
ehci_prepare_ports_for_controller_suspend(hcd_to_ehci(hcd),
|
|
device_may_wakeup(dev));
|
|
if (!fsl_deep_sleep())
|
|
return 0;
|
|
|
|
ehci_fsl->usb_ctrl = ioread32be(non_ehci + FSL_SOC_USB_CTRL);
|
|
return 0;
|
|
}
|
|
|
|
static int ehci_fsl_drv_resume(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
struct ehci_fsl *ehci_fsl = hcd_to_ehci_fsl(hcd);
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
void __iomem *non_ehci = hcd->regs;
|
|
|
|
if (of_device_is_compatible(dev->parent->of_node,
|
|
"fsl,mpc5121-usb2-dr")) {
|
|
return ehci_fsl_mpc512x_drv_resume(dev);
|
|
}
|
|
|
|
ehci_prepare_ports_for_controller_resume(ehci);
|
|
if (!fsl_deep_sleep())
|
|
return 0;
|
|
|
|
usb_root_hub_lost_power(hcd->self.root_hub);
|
|
|
|
/* Restore USB PHY settings and enable the controller. */
|
|
iowrite32be(ehci_fsl->usb_ctrl, non_ehci + FSL_SOC_USB_CTRL);
|
|
|
|
ehci_reset(ehci);
|
|
ehci_fsl_reinit(ehci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ehci_fsl_drv_restore(struct device *dev)
|
|
{
|
|
struct usb_hcd *hcd = dev_get_drvdata(dev);
|
|
|
|
usb_root_hub_lost_power(hcd->self.root_hub);
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops ehci_fsl_pm_ops = {
|
|
.suspend = ehci_fsl_drv_suspend,
|
|
.resume = ehci_fsl_drv_resume,
|
|
.restore = ehci_fsl_drv_restore,
|
|
};
|
|
|
|
#define EHCI_FSL_PM_OPS (&ehci_fsl_pm_ops)
|
|
#else
|
|
#define EHCI_FSL_PM_OPS NULL
|
|
#endif /* CONFIG_PM */
|
|
|
|
#ifdef CONFIG_USB_OTG
|
|
static int ehci_start_port_reset(struct usb_hcd *hcd, unsigned port)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
u32 status;
|
|
|
|
if (!port)
|
|
return -EINVAL;
|
|
|
|
port--;
|
|
|
|
/* start port reset before HNP protocol time out */
|
|
status = readl(&ehci->regs->port_status[port]);
|
|
if (!(status & PORT_CONNECT))
|
|
return -ENODEV;
|
|
|
|
/* hub_wq will finish the reset later */
|
|
if (ehci_is_TDI(ehci)) {
|
|
writel(PORT_RESET |
|
|
(status & ~(PORT_CSC | PORT_PEC | PORT_OCC)),
|
|
&ehci->regs->port_status[port]);
|
|
} else {
|
|
writel(PORT_RESET, &ehci->regs->port_status[port]);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
#define ehci_start_port_reset NULL
|
|
#endif /* CONFIG_USB_OTG */
|
|
|
|
static struct ehci_driver_overrides ehci_fsl_overrides __initdata = {
|
|
.extra_priv_size = sizeof(struct ehci_fsl),
|
|
.reset = ehci_fsl_setup,
|
|
};
|
|
|
|
/**
|
|
* fsl_ehci_drv_remove - shutdown processing for FSL-based HCDs
|
|
* @dev: USB Host Controller being removed
|
|
* Context: !in_interrupt()
|
|
*
|
|
* Reverses the effect of usb_hcd_fsl_probe().
|
|
*
|
|
*/
|
|
|
|
static int fsl_ehci_drv_remove(struct platform_device *pdev)
|
|
{
|
|
struct fsl_usb2_platform_data *pdata = dev_get_platdata(&pdev->dev);
|
|
struct usb_hcd *hcd = platform_get_drvdata(pdev);
|
|
|
|
if (!IS_ERR_OR_NULL(hcd->usb_phy)) {
|
|
otg_set_host(hcd->usb_phy->otg, NULL);
|
|
usb_put_phy(hcd->usb_phy);
|
|
}
|
|
|
|
usb_remove_hcd(hcd);
|
|
|
|
/*
|
|
* do platform specific un-initialization:
|
|
* release iomux pins, disable clock, etc.
|
|
*/
|
|
if (pdata->exit)
|
|
pdata->exit(pdev);
|
|
usb_put_hcd(hcd);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver ehci_fsl_driver = {
|
|
.probe = fsl_ehci_drv_probe,
|
|
.remove = fsl_ehci_drv_remove,
|
|
.shutdown = usb_hcd_platform_shutdown,
|
|
.driver = {
|
|
.name = "fsl-ehci",
|
|
.pm = EHCI_FSL_PM_OPS,
|
|
},
|
|
};
|
|
|
|
static int __init ehci_fsl_init(void)
|
|
{
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
pr_info(DRV_NAME ": " DRIVER_DESC "\n");
|
|
|
|
ehci_init_driver(&fsl_ehci_hc_driver, &ehci_fsl_overrides);
|
|
|
|
fsl_ehci_hc_driver.product_desc =
|
|
"Freescale On-Chip EHCI Host Controller";
|
|
fsl_ehci_hc_driver.start_port_reset = ehci_start_port_reset;
|
|
|
|
|
|
return platform_driver_register(&ehci_fsl_driver);
|
|
}
|
|
module_init(ehci_fsl_init);
|
|
|
|
static void __exit ehci_fsl_cleanup(void)
|
|
{
|
|
platform_driver_unregister(&ehci_fsl_driver);
|
|
}
|
|
module_exit(ehci_fsl_cleanup);
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:" DRV_NAME);
|