275 lines
7.7 KiB
C
275 lines
7.7 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* 3-axis accelerometer driver supporting many I2C Bosch-Sensortec chips
|
|
* Copyright (c) 2014, Intel Corporation.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/mod_devicetable.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/acpi.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#include "bmc150-accel.h"
|
|
|
|
#ifdef CONFIG_ACPI
|
|
static const struct acpi_device_id bmc150_acpi_dual_accel_ids[] = {
|
|
{"BOSC0200"},
|
|
{"DUAL250E"},
|
|
{ }
|
|
};
|
|
|
|
/*
|
|
* The DUAL250E ACPI device for 360° hinges type 2-in-1s with 1 accelerometer
|
|
* in the display and 1 in the hinge has an ACPI-method (DSM) to tell the
|
|
* ACPI code about the angle between the 2 halves. This will make the ACPI
|
|
* code enable/disable the keyboard and touchpad. We need to call this to avoid
|
|
* the keyboard being disabled when the 2-in-1 is turned-on or resumed while
|
|
* fully folded into tablet mode (which gets detected with a HALL-sensor).
|
|
* If we don't call this then the keyboard won't work even when the 2-in-1 is
|
|
* changed to be used in laptop mode after the power-on / resume.
|
|
*
|
|
* This DSM takes 2 angles, selected by setting aux0 to 0 or 1, these presumably
|
|
* define the angle between the gravity vector measured by the accelerometer in
|
|
* the display (aux0=0) resp. the base (aux0=1) and some reference vector.
|
|
* The 2 angles get subtracted from each other so the reference vector does
|
|
* not matter and we can simply leave the second angle at 0.
|
|
*/
|
|
|
|
#define BMC150_DSM_GUID "7681541e-8827-4239-8d9d-36be7fe12542"
|
|
#define DUAL250E_SET_ANGLE_FN_INDEX 3
|
|
|
|
struct dual250e_set_angle_args {
|
|
u32 aux0;
|
|
u32 ang0;
|
|
u32 rawx;
|
|
u32 rawy;
|
|
u32 rawz;
|
|
} __packed;
|
|
|
|
static bool bmc150_acpi_set_angle_dsm(struct i2c_client *client, u32 aux0, u32 ang0)
|
|
{
|
|
struct acpi_device *adev = ACPI_COMPANION(&client->dev);
|
|
struct dual250e_set_angle_args args = {
|
|
.aux0 = aux0,
|
|
.ang0 = ang0,
|
|
};
|
|
union acpi_object args_obj, *obj;
|
|
guid_t guid;
|
|
|
|
if (!acpi_dev_hid_uid_match(adev, "DUAL250E", NULL))
|
|
return false;
|
|
|
|
guid_parse(BMC150_DSM_GUID, &guid);
|
|
|
|
if (!acpi_check_dsm(adev->handle, &guid, 0, BIT(DUAL250E_SET_ANGLE_FN_INDEX)))
|
|
return false;
|
|
|
|
/*
|
|
* Note this triggers the following warning:
|
|
* "ACPI Warning: \_SB.PCI0.I2C2.ACC1._DSM: Argument #4 type mismatch -
|
|
* Found [Buffer], ACPI requires [Package]"
|
|
* This is unavoidable since the _DSM implementation expects a "naked"
|
|
* buffer, so wrapping it in a package will _not_ work.
|
|
*/
|
|
args_obj.type = ACPI_TYPE_BUFFER;
|
|
args_obj.buffer.length = sizeof(args);
|
|
args_obj.buffer.pointer = (u8 *)&args;
|
|
|
|
obj = acpi_evaluate_dsm(adev->handle, &guid, 0, DUAL250E_SET_ANGLE_FN_INDEX, &args_obj);
|
|
if (!obj) {
|
|
dev_err(&client->dev, "Failed to call DSM to enable keyboard and touchpad\n");
|
|
return false;
|
|
}
|
|
|
|
ACPI_FREE(obj);
|
|
return true;
|
|
}
|
|
|
|
static bool bmc150_acpi_enable_keyboard(struct i2c_client *client)
|
|
{
|
|
/*
|
|
* The EC must see a change for it to re-enable the kbd, so first
|
|
* set the angle to 270° (tent/stand mode) and then change it to
|
|
* 90° (laptop mode).
|
|
*/
|
|
if (!bmc150_acpi_set_angle_dsm(client, 0, 270))
|
|
return false;
|
|
|
|
/* The EC needs some time to notice the angle being changed */
|
|
msleep(100);
|
|
|
|
return bmc150_acpi_set_angle_dsm(client, 0, 90);
|
|
}
|
|
|
|
static void bmc150_acpi_resume_work(struct work_struct *work)
|
|
{
|
|
struct bmc150_accel_data *data =
|
|
container_of(work, struct bmc150_accel_data, resume_work.work);
|
|
|
|
bmc150_acpi_enable_keyboard(data->second_device);
|
|
}
|
|
|
|
static void bmc150_acpi_resume_handler(struct device *dev)
|
|
{
|
|
struct bmc150_accel_data *data = iio_priv(dev_get_drvdata(dev));
|
|
|
|
/*
|
|
* Delay the bmc150_acpi_enable_keyboard() call till after the system
|
|
* resume has completed, otherwise it will not work.
|
|
*/
|
|
schedule_delayed_work(&data->resume_work, msecs_to_jiffies(1000));
|
|
}
|
|
|
|
/*
|
|
* Some acpi_devices describe 2 accelerometers in a single ACPI device,
|
|
* try instantiating a second i2c_client for an I2cSerialBusV2 ACPI resource
|
|
* with index 1.
|
|
*/
|
|
static void bmc150_acpi_dual_accel_probe(struct i2c_client *client)
|
|
{
|
|
struct bmc150_accel_data *data = iio_priv(i2c_get_clientdata(client));
|
|
struct acpi_device *adev = ACPI_COMPANION(&client->dev);
|
|
char dev_name[16];
|
|
struct i2c_board_info board_info = {
|
|
.type = "bmc150_accel",
|
|
.dev_name = dev_name,
|
|
.fwnode = client->dev.fwnode,
|
|
};
|
|
|
|
if (acpi_match_device_ids(adev, bmc150_acpi_dual_accel_ids))
|
|
return;
|
|
|
|
/*
|
|
* The 2nd accel sits in the base of 2-in-1s. The suffix is static, as
|
|
* there should never be more then 1 ACPI node with 2 accelerometers.
|
|
*/
|
|
snprintf(dev_name, sizeof(dev_name), "%s:base", acpi_device_hid(adev));
|
|
|
|
board_info.irq = acpi_dev_gpio_irq_get(adev, 1);
|
|
|
|
data->second_device = i2c_acpi_new_device(&client->dev, 1, &board_info);
|
|
|
|
if (!IS_ERR(data->second_device) && bmc150_acpi_enable_keyboard(data->second_device)) {
|
|
INIT_DELAYED_WORK(&data->resume_work, bmc150_acpi_resume_work);
|
|
data->resume_callback = bmc150_acpi_resume_handler;
|
|
}
|
|
}
|
|
|
|
static void bmc150_acpi_dual_accel_remove(struct i2c_client *client)
|
|
{
|
|
struct bmc150_accel_data *data = iio_priv(i2c_get_clientdata(client));
|
|
|
|
if (data->resume_callback)
|
|
cancel_delayed_work_sync(&data->resume_work);
|
|
|
|
i2c_unregister_device(data->second_device);
|
|
}
|
|
#else
|
|
static void bmc150_acpi_dual_accel_probe(struct i2c_client *client) {}
|
|
static void bmc150_acpi_dual_accel_remove(struct i2c_client *client) {}
|
|
#endif
|
|
|
|
static int bmc150_accel_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct regmap *regmap;
|
|
const char *name = NULL;
|
|
bool block_supported =
|
|
i2c_check_functionality(client->adapter, I2C_FUNC_I2C) ||
|
|
i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_SMBUS_READ_I2C_BLOCK);
|
|
int ret;
|
|
|
|
regmap = devm_regmap_init_i2c(client, &bmc150_regmap_conf);
|
|
if (IS_ERR(regmap)) {
|
|
dev_err(&client->dev, "Failed to initialize i2c regmap\n");
|
|
return PTR_ERR(regmap);
|
|
}
|
|
|
|
if (id)
|
|
name = id->name;
|
|
|
|
ret = bmc150_accel_core_probe(&client->dev, regmap, client->irq, name, block_supported);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* The !id check avoids recursion when probe() gets called
|
|
* for the second client.
|
|
*/
|
|
if (!id && has_acpi_companion(&client->dev))
|
|
bmc150_acpi_dual_accel_probe(client);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int bmc150_accel_remove(struct i2c_client *client)
|
|
{
|
|
bmc150_acpi_dual_accel_remove(client);
|
|
|
|
return bmc150_accel_core_remove(&client->dev);
|
|
}
|
|
|
|
static const struct acpi_device_id bmc150_accel_acpi_match[] = {
|
|
{"BMA0255"},
|
|
{"BMA0280"},
|
|
{"BMA222"},
|
|
{"BMA222E"},
|
|
{"BMA250E"},
|
|
{"BMC150A"},
|
|
{"BMI055A"},
|
|
{"BOSC0200"},
|
|
{"BSBA0150"},
|
|
{"DUAL250E"},
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(acpi, bmc150_accel_acpi_match);
|
|
|
|
static const struct i2c_device_id bmc150_accel_id[] = {
|
|
{"bma222"},
|
|
{"bma222e"},
|
|
{"bma250e"},
|
|
{"bma253"},
|
|
{"bma254"},
|
|
{"bma255"},
|
|
{"bma280"},
|
|
{"bmc150_accel"},
|
|
{"bmi055_accel"},
|
|
{}
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(i2c, bmc150_accel_id);
|
|
|
|
static const struct of_device_id bmc150_accel_of_match[] = {
|
|
{ .compatible = "bosch,bma222" },
|
|
{ .compatible = "bosch,bma222e" },
|
|
{ .compatible = "bosch,bma250e" },
|
|
{ .compatible = "bosch,bma253" },
|
|
{ .compatible = "bosch,bma254" },
|
|
{ .compatible = "bosch,bma255" },
|
|
{ .compatible = "bosch,bma280" },
|
|
{ .compatible = "bosch,bmc150_accel" },
|
|
{ .compatible = "bosch,bmi055_accel" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, bmc150_accel_of_match);
|
|
|
|
static struct i2c_driver bmc150_accel_driver = {
|
|
.driver = {
|
|
.name = "bmc150_accel_i2c",
|
|
.of_match_table = bmc150_accel_of_match,
|
|
.acpi_match_table = ACPI_PTR(bmc150_accel_acpi_match),
|
|
.pm = &bmc150_accel_pm_ops,
|
|
},
|
|
.probe = bmc150_accel_probe,
|
|
.remove = bmc150_accel_remove,
|
|
.id_table = bmc150_accel_id,
|
|
};
|
|
module_i2c_driver(bmc150_accel_driver);
|
|
|
|
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
|
|
MODULE_LICENSE("GPL v2");
|
|
MODULE_DESCRIPTION("BMC150 I2C accelerometer driver");
|