OpenCloudOS-Kernel/drivers/net/usb
Bjørn Mork 6289d0facd qmi_wwan: add Olicard 600
This is a Qualcomm based device with a QMI function on interface 4.
It is mode switched from 2020:2030 using a standard eject message.

T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  6 Spd=480  MxCh= 0
D:  Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs=  1
P:  Vendor=2020 ProdID=2031 Rev= 2.32
S:  Manufacturer=Mobile Connect
S:  Product=Mobile Connect
S:  SerialNumber=0123456789ABCDEF
C:* #Ifs= 6 Cfg#= 1 Atr=80 MxPwr=500mA
I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=83(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=85(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=(none)
E:  Ad=87(I) Atr=03(Int.) MxPS=  10 Ivl=32ms
E:  Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none)
E:  Ad=89(I) Atr=03(Int.) MxPS=   8 Ivl=32ms
E:  Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
I:* If#= 5 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none)
E:  Ad=8a(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E:  Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=125us

Signed-off-by: Bjørn Mork <bjorn@mork.no>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-03-28 16:58:06 -07:00
..
Kconfig net: Don't default Aquantia USB driver to 'y' 2018-11-29 16:01:34 -08:00
Makefile net: usb: aqc111: Driver skeleton for Aquantia AQtion USB to 5GbE 2018-11-27 15:46:06 -08:00
aqc111.c net: usb: aqc111: Extend HWID table by QNAP device 2019-03-26 11:19:42 -07:00
aqc111.h net: usb: aqc111: Add support for wake on LAN by MAGIC packet 2018-11-27 15:46:07 -08:00
asix.h asix: Fix small memory leak in ax88772_unbind() 2017-08-07 10:10:19 -07:00
asix_common.c asix: Check for supported Wake-on-LAN modes 2018-09-29 11:31:29 -07:00
asix_devices.c net: usb: asix: ax88772_bind return error when hw_reset fail 2019-01-24 22:33:11 -08:00
ax88172a.c
ax88179_178a.c ax88179_178a: Check for supported Wake-on-LAN modes 2018-09-29 11:31:29 -07:00
catc.c net: usb: Mark expected switch fall-throughs 2018-06-30 20:47:16 +09:00
cdc-phonet.c net: usb: cdc-phonet: use struct_size() in alloc_netdev() 2019-02-08 22:57:27 -08:00
cdc_eem.c net: cdc_eem: clean up bind error path 2018-03-07 15:39:27 -05:00
cdc_ether.c net: usb: aqc111: Extend HWID table by QNAP device 2019-03-26 11:19:42 -07:00
cdc_mbim.c net: usb: cdc_mbim: add flag FLAG_SEND_ZLP 2018-06-01 14:01:42 -04:00
cdc_ncm.c net: cdc_ncm: remove set but not used variable 'ctx' 2018-10-12 09:45:36 -07:00
cdc_subset.c
ch9200.c net: ch9200: add missing USB-descriptor endianness conversions 2017-05-12 12:15:46 -04:00
cx82310_eth.c
dm9601.c
gl620a.c networking: make skb_push & __skb_push return void pointers 2017-06-16 11:48:40 -04:00
hso.c USB: hso: Fix OOB memory access in hso_probe/hso_get_config_data 2018-12-12 15:41:10 -08:00
huawei_cdc_ncm.c cdc_ncm: Set NTB format again after altsetting switch for Huawei devices 2017-07-14 08:15:05 -07:00
int51x1.c net: introduce __skb_put_[zero, data, u8] 2017-06-20 13:30:14 -04:00
ipheth.c usbnet: ipheth: fix potential recvmsg bug and recvmsg bug 2 2018-11-27 14:57:16 -08:00
kalmia.c net: kalmia: clean up bind error path 2018-03-07 15:39:27 -05:00
kaweth.c net: usb: kaweth: use irqsave() in USB's complete callback 2018-06-22 13:57:45 +09:00
lan78xx.c net: phy: fixed-phy: Drop GPIO from fixed_phy_add() 2019-02-04 18:33:36 -08:00
lan78xx.h net: lan78xx: Switch to SPDX identifier 2018-09-05 22:20:45 -07:00
lg-vl600.c net: drivers/net: Remove unnecessary skb_copy_expand OOM messages 2018-03-15 14:28:03 -04:00
mcs7830.c
net1080.c networking: add and use skb_put_u8() 2017-06-16 11:48:40 -04:00
pegasus.c net: usb: pegasus: Mark expected switch fall-through 2019-02-08 11:54:06 -08:00
pegasus.h
plusb.c
qmi_wwan.c qmi_wwan: add Olicard 600 2019-03-28 16:58:06 -07:00
r8152.c r8152: Fix an error on RTL8153-BD MAC Address Passthrough support 2019-02-22 11:36:55 -08:00
rndis_host.c rndis_host: support Novatel Verizon USB730L 2017-10-03 14:30:46 -07:00
rtl8150.c net: usb: rtl8150: mark expected switch fall-through 2019-02-08 11:54:27 -08:00
sierra_net.c net: usb: Convert timers to use timer_setup() 2017-10-18 12:40:26 +01:00
smsc75xx.c net/usb: cancel pending work when unbinding smsc75xx 2018-10-04 13:51:30 -07:00
smsc75xx.h
smsc95xx.c usbnet: smsc95xx: check for csum being in last four bytes 2018-11-16 20:16:19 -08:00
smsc95xx.h
sr9700.c drivers: net: Remove unnecessary semicolon 2019-03-01 23:13:49 -08:00
sr9700.h
sr9800.c sr9800: Check for supported Wake-on-LAN modes 2018-09-29 11:31:29 -07:00
sr9800.h
usbnet.c net: usbnet: make driver_info const 2018-10-02 22:22:46 -07:00
zaurus.c networking: add and use skb_put_u8() 2017-06-16 11:48:40 -04:00