545 lines
13 KiB
C
545 lines
13 KiB
C
/*
|
|
* Copyright (C) 2012 Samsung Electronics Co.Ltd
|
|
* Author: Joonyoung Shim <jy0922.shim@samsung.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/i2c/mms114.h>
|
|
#include <linux/input/mt.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/slab.h>
|
|
|
|
/* Write only registers */
|
|
#define MMS114_MODE_CONTROL 0x01
|
|
#define MMS114_OPERATION_MODE_MASK 0xE
|
|
#define MMS114_ACTIVE (1 << 1)
|
|
|
|
#define MMS114_XY_RESOLUTION_H 0x02
|
|
#define MMS114_X_RESOLUTION 0x03
|
|
#define MMS114_Y_RESOLUTION 0x04
|
|
#define MMS114_CONTACT_THRESHOLD 0x05
|
|
#define MMS114_MOVING_THRESHOLD 0x06
|
|
|
|
/* Read only registers */
|
|
#define MMS114_PACKET_SIZE 0x0F
|
|
#define MMS114_INFOMATION 0x10
|
|
#define MMS114_TSP_REV 0xF0
|
|
|
|
/* Minimum delay time is 50us between stop and start signal of i2c */
|
|
#define MMS114_I2C_DELAY 50
|
|
|
|
/* 200ms needs after power on */
|
|
#define MMS114_POWERON_DELAY 200
|
|
|
|
/* Touchscreen absolute values */
|
|
#define MMS114_MAX_AREA 0xff
|
|
|
|
#define MMS114_MAX_TOUCH 10
|
|
#define MMS114_PACKET_NUM 8
|
|
|
|
/* Touch type */
|
|
#define MMS114_TYPE_NONE 0
|
|
#define MMS114_TYPE_TOUCHSCREEN 1
|
|
#define MMS114_TYPE_TOUCHKEY 2
|
|
|
|
struct mms114_data {
|
|
struct i2c_client *client;
|
|
struct input_dev *input_dev;
|
|
struct regulator *core_reg;
|
|
struct regulator *io_reg;
|
|
const struct mms114_platform_data *pdata;
|
|
|
|
/* Use cache data for mode control register(write only) */
|
|
u8 cache_mode_control;
|
|
};
|
|
|
|
struct mms114_touch {
|
|
u8 id:4, reserved_bit4:1, type:2, pressed:1;
|
|
u8 x_hi:4, y_hi:4;
|
|
u8 x_lo;
|
|
u8 y_lo;
|
|
u8 width;
|
|
u8 strength;
|
|
u8 reserved[2];
|
|
} __packed;
|
|
|
|
static int __mms114_read_reg(struct mms114_data *data, unsigned int reg,
|
|
unsigned int len, u8 *val)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
struct i2c_msg xfer[2];
|
|
u8 buf = reg & 0xff;
|
|
int error;
|
|
|
|
if (reg <= MMS114_MODE_CONTROL && reg + len > MMS114_MODE_CONTROL)
|
|
BUG();
|
|
|
|
/* Write register: use repeated start */
|
|
xfer[0].addr = client->addr;
|
|
xfer[0].flags = I2C_M_TEN | I2C_M_NOSTART;
|
|
xfer[0].len = 1;
|
|
xfer[0].buf = &buf;
|
|
|
|
/* Read data */
|
|
xfer[1].addr = client->addr;
|
|
xfer[1].flags = I2C_M_RD;
|
|
xfer[1].len = len;
|
|
xfer[1].buf = val;
|
|
|
|
error = i2c_transfer(client->adapter, xfer, 2);
|
|
if (error != 2) {
|
|
dev_err(&client->dev,
|
|
"%s: i2c transfer failed (%d)\n", __func__, error);
|
|
return error < 0 ? error : -EIO;
|
|
}
|
|
udelay(MMS114_I2C_DELAY);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mms114_read_reg(struct mms114_data *data, unsigned int reg)
|
|
{
|
|
u8 val;
|
|
int error;
|
|
|
|
if (reg == MMS114_MODE_CONTROL)
|
|
return data->cache_mode_control;
|
|
|
|
error = __mms114_read_reg(data, reg, 1, &val);
|
|
return error < 0 ? error : val;
|
|
}
|
|
|
|
static int mms114_write_reg(struct mms114_data *data, unsigned int reg,
|
|
unsigned int val)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
u8 buf[2];
|
|
int error;
|
|
|
|
buf[0] = reg & 0xff;
|
|
buf[1] = val & 0xff;
|
|
|
|
error = i2c_master_send(client, buf, 2);
|
|
if (error != 2) {
|
|
dev_err(&client->dev,
|
|
"%s: i2c send failed (%d)\n", __func__, error);
|
|
return error < 0 ? error : -EIO;
|
|
}
|
|
udelay(MMS114_I2C_DELAY);
|
|
|
|
if (reg == MMS114_MODE_CONTROL)
|
|
data->cache_mode_control = val;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mms114_process_mt(struct mms114_data *data, struct mms114_touch *touch)
|
|
{
|
|
const struct mms114_platform_data *pdata = data->pdata;
|
|
struct i2c_client *client = data->client;
|
|
struct input_dev *input_dev = data->input_dev;
|
|
unsigned int id;
|
|
unsigned int x;
|
|
unsigned int y;
|
|
|
|
if (touch->id > MMS114_MAX_TOUCH) {
|
|
dev_err(&client->dev, "Wrong touch id (%d)\n", touch->id);
|
|
return;
|
|
}
|
|
|
|
if (touch->type != MMS114_TYPE_TOUCHSCREEN) {
|
|
dev_err(&client->dev, "Wrong touch type (%d)\n", touch->type);
|
|
return;
|
|
}
|
|
|
|
id = touch->id - 1;
|
|
x = touch->x_lo | touch->x_hi << 8;
|
|
y = touch->y_lo | touch->y_hi << 8;
|
|
if (x > pdata->x_size || y > pdata->y_size) {
|
|
dev_dbg(&client->dev,
|
|
"Wrong touch coordinates (%d, %d)\n", x, y);
|
|
return;
|
|
}
|
|
|
|
if (pdata->x_invert)
|
|
x = pdata->x_size - x;
|
|
if (pdata->y_invert)
|
|
y = pdata->y_size - y;
|
|
|
|
dev_dbg(&client->dev,
|
|
"id: %d, type: %d, pressed: %d, x: %d, y: %d, width: %d, strength: %d\n",
|
|
id, touch->type, touch->pressed,
|
|
x, y, touch->width, touch->strength);
|
|
|
|
input_mt_slot(input_dev, id);
|
|
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, touch->pressed);
|
|
|
|
if (touch->pressed) {
|
|
input_report_abs(input_dev, ABS_MT_TOUCH_MAJOR, touch->width);
|
|
input_report_abs(input_dev, ABS_MT_POSITION_X, x);
|
|
input_report_abs(input_dev, ABS_MT_POSITION_Y, y);
|
|
input_report_abs(input_dev, ABS_MT_PRESSURE, touch->strength);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t mms114_interrupt(int irq, void *dev_id)
|
|
{
|
|
struct mms114_data *data = dev_id;
|
|
struct input_dev *input_dev = data->input_dev;
|
|
struct mms114_touch touch[MMS114_MAX_TOUCH];
|
|
int packet_size;
|
|
int touch_size;
|
|
int index;
|
|
int error;
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
if (!input_dev->users) {
|
|
mutex_unlock(&input_dev->mutex);
|
|
goto out;
|
|
}
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
packet_size = mms114_read_reg(data, MMS114_PACKET_SIZE);
|
|
if (packet_size <= 0)
|
|
goto out;
|
|
|
|
touch_size = packet_size / MMS114_PACKET_NUM;
|
|
|
|
error = __mms114_read_reg(data, MMS114_INFOMATION, packet_size,
|
|
(u8 *)touch);
|
|
if (error < 0)
|
|
goto out;
|
|
|
|
for (index = 0; index < touch_size; index++)
|
|
mms114_process_mt(data, touch + index);
|
|
|
|
input_mt_report_pointer_emulation(data->input_dev, true);
|
|
input_sync(data->input_dev);
|
|
|
|
out:
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int mms114_set_active(struct mms114_data *data, bool active)
|
|
{
|
|
int val;
|
|
|
|
val = mms114_read_reg(data, MMS114_MODE_CONTROL);
|
|
if (val < 0)
|
|
return val;
|
|
|
|
val &= ~MMS114_OPERATION_MODE_MASK;
|
|
|
|
/* If active is false, sleep mode */
|
|
if (active)
|
|
val |= MMS114_ACTIVE;
|
|
|
|
return mms114_write_reg(data, MMS114_MODE_CONTROL, val);
|
|
}
|
|
|
|
static int mms114_get_version(struct mms114_data *data)
|
|
{
|
|
struct device *dev = &data->client->dev;
|
|
u8 buf[6];
|
|
int error;
|
|
|
|
error = __mms114_read_reg(data, MMS114_TSP_REV, 6, buf);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
dev_info(dev, "TSP Rev: 0x%x, HW Rev: 0x%x, Firmware Ver: 0x%x\n",
|
|
buf[0], buf[1], buf[3]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mms114_setup_regs(struct mms114_data *data)
|
|
{
|
|
const struct mms114_platform_data *pdata = data->pdata;
|
|
int val;
|
|
int error;
|
|
|
|
error = mms114_get_version(data);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
error = mms114_set_active(data, true);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
val = (pdata->x_size >> 8) & 0xf;
|
|
val |= ((pdata->y_size >> 8) & 0xf) << 4;
|
|
error = mms114_write_reg(data, MMS114_XY_RESOLUTION_H, val);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
val = pdata->x_size & 0xff;
|
|
error = mms114_write_reg(data, MMS114_X_RESOLUTION, val);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
val = pdata->y_size & 0xff;
|
|
error = mms114_write_reg(data, MMS114_Y_RESOLUTION, val);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
if (pdata->contact_threshold) {
|
|
error = mms114_write_reg(data, MMS114_CONTACT_THRESHOLD,
|
|
pdata->contact_threshold);
|
|
if (error < 0)
|
|
return error;
|
|
}
|
|
|
|
if (pdata->moving_threshold) {
|
|
error = mms114_write_reg(data, MMS114_MOVING_THRESHOLD,
|
|
pdata->moving_threshold);
|
|
if (error < 0)
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mms114_start(struct mms114_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
int error;
|
|
|
|
if (data->core_reg)
|
|
regulator_enable(data->core_reg);
|
|
if (data->io_reg)
|
|
regulator_enable(data->io_reg);
|
|
mdelay(MMS114_POWERON_DELAY);
|
|
|
|
error = mms114_setup_regs(data);
|
|
if (error < 0)
|
|
return error;
|
|
|
|
if (data->pdata->cfg_pin)
|
|
data->pdata->cfg_pin(true);
|
|
|
|
enable_irq(client->irq);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void mms114_stop(struct mms114_data *data)
|
|
{
|
|
struct i2c_client *client = data->client;
|
|
|
|
disable_irq(client->irq);
|
|
|
|
if (data->pdata->cfg_pin)
|
|
data->pdata->cfg_pin(false);
|
|
|
|
if (data->io_reg)
|
|
regulator_disable(data->io_reg);
|
|
if (data->core_reg)
|
|
regulator_disable(data->core_reg);
|
|
}
|
|
|
|
static int mms114_input_open(struct input_dev *dev)
|
|
{
|
|
struct mms114_data *data = input_get_drvdata(dev);
|
|
|
|
return mms114_start(data);
|
|
}
|
|
|
|
static void mms114_input_close(struct input_dev *dev)
|
|
{
|
|
struct mms114_data *data = input_get_drvdata(dev);
|
|
|
|
mms114_stop(data);
|
|
}
|
|
|
|
static int __devinit mms114_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct mms114_data *data;
|
|
struct input_dev *input_dev;
|
|
int error;
|
|
|
|
if (!client->dev.platform_data) {
|
|
dev_err(&client->dev, "Need platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!i2c_check_functionality(client->adapter,
|
|
I2C_FUNC_PROTOCOL_MANGLING)) {
|
|
dev_err(&client->dev,
|
|
"Need i2c bus that supports protocol mangling\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
data = kzalloc(sizeof(struct mms114_data), GFP_KERNEL);
|
|
input_dev = input_allocate_device();
|
|
if (!data || !input_dev) {
|
|
dev_err(&client->dev, "Failed to allocate memory\n");
|
|
error = -ENOMEM;
|
|
goto err_free_mem;
|
|
}
|
|
|
|
data->client = client;
|
|
data->input_dev = input_dev;
|
|
data->pdata = client->dev.platform_data;
|
|
|
|
input_dev->name = "MELPAS MMS114 Touchscreen";
|
|
input_dev->id.bustype = BUS_I2C;
|
|
input_dev->dev.parent = &client->dev;
|
|
input_dev->open = mms114_input_open;
|
|
input_dev->close = mms114_input_close;
|
|
|
|
__set_bit(EV_ABS, input_dev->evbit);
|
|
__set_bit(EV_KEY, input_dev->evbit);
|
|
__set_bit(BTN_TOUCH, input_dev->keybit);
|
|
input_set_abs_params(input_dev, ABS_X, 0, data->pdata->x_size, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_Y, 0, data->pdata->y_size, 0, 0);
|
|
|
|
/* For multi touch */
|
|
input_mt_init_slots(input_dev, MMS114_MAX_TOUCH);
|
|
input_set_abs_params(input_dev, ABS_MT_TOUCH_MAJOR,
|
|
0, MMS114_MAX_AREA, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_X,
|
|
0, data->pdata->x_size, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_POSITION_Y,
|
|
0, data->pdata->y_size, 0, 0);
|
|
input_set_abs_params(input_dev, ABS_MT_PRESSURE, 0, 255, 0, 0);
|
|
|
|
input_set_drvdata(input_dev, data);
|
|
i2c_set_clientdata(client, data);
|
|
|
|
data->core_reg = regulator_get(&client->dev, "avdd");
|
|
if (IS_ERR(data->core_reg)) {
|
|
error = PTR_ERR(data->core_reg);
|
|
dev_err(&client->dev,
|
|
"Unable to get the Core regulator (%d)\n", error);
|
|
goto err_free_mem;
|
|
}
|
|
|
|
data->io_reg = regulator_get(&client->dev, "vdd");
|
|
if (IS_ERR(data->io_reg)) {
|
|
error = PTR_ERR(data->io_reg);
|
|
dev_err(&client->dev,
|
|
"Unable to get the IO regulator (%d)\n", error);
|
|
goto err_core_reg;
|
|
}
|
|
|
|
error = request_threaded_irq(client->irq, NULL, mms114_interrupt,
|
|
IRQF_TRIGGER_FALLING | IRQF_ONESHOT, "mms114", data);
|
|
if (error) {
|
|
dev_err(&client->dev, "Failed to register interrupt\n");
|
|
goto err_io_reg;
|
|
}
|
|
disable_irq(client->irq);
|
|
|
|
error = input_register_device(data->input_dev);
|
|
if (error)
|
|
goto err_free_irq;
|
|
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(client->irq, data);
|
|
err_io_reg:
|
|
regulator_put(data->io_reg);
|
|
err_core_reg:
|
|
regulator_put(data->core_reg);
|
|
err_free_mem:
|
|
input_free_device(input_dev);
|
|
kfree(data);
|
|
return error;
|
|
}
|
|
|
|
static int __devexit mms114_remove(struct i2c_client *client)
|
|
{
|
|
struct mms114_data *data = i2c_get_clientdata(client);
|
|
|
|
free_irq(client->irq, data);
|
|
regulator_put(data->io_reg);
|
|
regulator_put(data->core_reg);
|
|
input_unregister_device(data->input_dev);
|
|
kfree(data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int mms114_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mms114_data *data = i2c_get_clientdata(client);
|
|
struct input_dev *input_dev = data->input_dev;
|
|
int id;
|
|
|
|
/* Release all touch */
|
|
for (id = 0; id < MMS114_MAX_TOUCH; id++) {
|
|
input_mt_slot(input_dev, id);
|
|
input_mt_report_slot_state(input_dev, MT_TOOL_FINGER, false);
|
|
}
|
|
|
|
input_mt_report_pointer_emulation(input_dev, true);
|
|
input_sync(input_dev);
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
if (input_dev->users)
|
|
mms114_stop(data);
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int mms114_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct mms114_data *data = i2c_get_clientdata(client);
|
|
struct input_dev *input_dev = data->input_dev;
|
|
int error;
|
|
|
|
mutex_lock(&input_dev->mutex);
|
|
if (input_dev->users) {
|
|
error = mms114_start(data);
|
|
if (error < 0) {
|
|
mutex_unlock(&input_dev->mutex);
|
|
return error;
|
|
}
|
|
}
|
|
mutex_unlock(&input_dev->mutex);
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(mms114_pm_ops, mms114_suspend, mms114_resume);
|
|
|
|
static const struct i2c_device_id mms114_id[] = {
|
|
{ "mms114", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, mms114_id);
|
|
|
|
static struct i2c_driver mms114_driver = {
|
|
.driver = {
|
|
.name = "mms114",
|
|
.owner = THIS_MODULE,
|
|
.pm = &mms114_pm_ops,
|
|
},
|
|
.probe = mms114_probe,
|
|
.remove = __devexit_p(mms114_remove),
|
|
.id_table = mms114_id,
|
|
};
|
|
|
|
module_i2c_driver(mms114_driver);
|
|
|
|
/* Module information */
|
|
MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>");
|
|
MODULE_DESCRIPTION("MELFAS mms114 Touchscreen driver");
|
|
MODULE_LICENSE("GPL");
|