OpenCloudOS-Kernel/arch/arm/boot/dts/zynq-microzed.dts

97 lines
1.7 KiB
Plaintext

/*
* Copyright (C) 2011 - 2014 Xilinx
* Copyright (C) 2016 Jagan Teki <jteki@openedev.com>
*
* This software is licensed under the terms of the GNU General Public
* License version 2, as published by the Free Software Foundation, and
* may be copied, distributed, and modified under those terms.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
/dts-v1/;
/include/ "zynq-7000.dtsi"
/ {
model = "Zynq MicroZED Development Board";
compatible = "xlnx,zynq-microzed", "xlnx,zynq-7000";
aliases {
ethernet0 = &gem0;
serial0 = &uart1;
};
memory {
device_type = "memory";
reg = <0x0 0x40000000>;
};
chosen {
bootargs = "earlycon";
stdout-path = "serial0:115200n8";
};
usb_phy0: phy0 {
compatible = "usb-nop-xceiv";
#phy-cells = <0>;
};
};
&clkc {
ps-clk-frequency = <33333333>;
};
&gem0 {
status = "okay";
phy-mode = "rgmii-id";
phy-handle = <&ethernet_phy>;
ethernet_phy: ethernet-phy@0 {
reg = <0>;
};
};
&sdhci0 {
status = "okay";
};
&uart1 {
status = "okay";
};
&usb0 {
status = "okay";
dr_mode = "host";
usb-phy = <&usb_phy0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usb0_default>;
};
&pinctrl0 {
pinctrl_usb0_default: usb0-default {
mux {
groups = "usb0_0_grp";
function = "usb0";
};
conf {
groups = "usb0_0_grp";
slew-rate = <0>;
io-standard = <1>;
};
conf-rx {
pins = "MIO29", "MIO31", "MIO36";
bias-high-impedance;
};
conf-tx {
pins = "MIO28", "MIO30", "MIO32", "MIO33", "MIO34",
"MIO35", "MIO37", "MIO38", "MIO39";
bias-disable;
};
};
};