UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/arch/arm/boot/dts/imx6ul-opos6uldev.dts

413 lines
10 KiB
Plaintext
Raw Blame History

/*
* Copyright 2017 Armadeus Systems <support@armadeus.com>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public
* License along with this file; if not, write to the Free
* Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6ul-opos6ul.dtsi"
/ {
model = "Armadeus Systems OPOS6UL SoM on OPOS6ULDev board";
compatible = "armadeus,opos6uldev", "armadeus,opos6ul", "fsl,imx6ul";
chosen {
stdout-path = &uart1;
};
backlight {
compatible = "pwm-backlight";
pwms = <&pwm3 0 191000>;
brightness-levels = <0 4 8 16 32 64 128 255>;
default-brightness-level = <7>;
power-supply = <&reg_5v>;
status = "okay";
};
gpio-keys {
compatible = "gpio-keys";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpio_keys>;
user-button {
label = "User button";
gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
linux,code = <BTN_MISC>;
wakeup-source;
};
};
leds {
compatible = "gpio-leds";
user-led {
label = "User";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_led>;
gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
linux,default-trigger = "heartbeat";
};
};
onewire {
compatible = "w1-gpio";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_w1>;
gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
};
reg_5v: regulator-5v {
compatible = "regulator-fixed";
regulator-name = "5V";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
};
reg_usbotg1_vbus: regulator-usbotg1vbus {
compatible = "regulator-fixed";
regulator-name = "usbotg1vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_vbus>;
gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbotg2_vbus: regulator-usbotg2vbus {
compatible = "regulator-fixed";
regulator-name = "usbotg2vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg2_vbus>;
gpio = <&gpio5 9 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
&adc1 {
vref-supply = <&reg_3v3>;
status = "okay";
};
&can1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan1>;
xceiver-supply = <&reg_5v>;
status = "okay";
};
&can2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_flexcan2>;
xceiver-supply = <&reg_5v>;
status = "okay";
};
&ecspi4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ecspi4>;
cs-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>, <&gpio4 3 GPIO_ACTIVE_LOW>;
status = "okay";
spidev0: spi@0 {
compatible = "spidev";
reg = <0>;
spi-max-frequency = <5000000>;
};
spidev1: spi@1 {
compatible = "spidev";
reg = <1>;
spi-max-frequency = <5000000>;
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c1>;
clock_frequency = <400000>;
status = "okay";
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
clock_frequency = <400000>;
status = "okay";
};
&lcdif {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcdif>;
display = <&display0>;
lcd-supply = <&reg_3v3>;
status = "okay";
display0: display0 {
bits-per-pixel = <32>;
bus-width = <18>;
display-timings {
timing0: timing0 {
clock-frequency = <33000033>;
hactive = <800>;
vactive = <480>;
hback-porch = <96>;
hfront-porch = <96>;
vback-porch = <20>;
vfront-porch = <21>;
hsync-len = <64>;
vsync-len = <4>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&pwm3 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pwm3>;
status = "okay";
};
&snvs_pwrkey {
status = "disabled";
};
&tsc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc>;
xnur-gpio = <&gpio1 3 GPIO_ACTIVE_LOW>;
measure-delay-time = <0xffff>;
pre-charge-time = <0xffff>;
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart2>;
status = "okay";
};
&usbotg1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg1_id>;
vbus-supply = <&reg_usbotg1_vbus>;
dr_mode = "otg";
disable-over-current;
status = "okay";
};
&usbotg2 {
vbus-supply = <&reg_usbotg2_vbus>;
dr_mode = "host";
disable-over-current;
status = "okay";
};
&iomuxc {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_gpios>;
pinctrl_ecspi4: ecspi4grp {
fsl,pins = <
MX6UL_PAD_NAND_DATA04__ECSPI4_SCLK 0x1b0b0
MX6UL_PAD_NAND_DATA05__ECSPI4_MOSI 0x1b0b0
MX6UL_PAD_NAND_DATA06__ECSPI4_MISO 0x1b0b0
MX6UL_PAD_NAND_DATA01__GPIO4_IO03 0x1b0b0
MX6UL_PAD_NAND_DATA07__GPIO4_IO09 0x1b0b0
>;
};
pinctrl_flexcan1: flexcan1grp {
fsl,pins = <
MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
>;
};
pinctrl_flexcan2: flexcan2grp {
fsl,pins = <
MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
>;
};
pinctrl_gpios: gpiosgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO09__GPIO1_IO09 0x0b0b0
MX6UL_PAD_UART3_RX_DATA__GPIO1_IO25 0x0b0b0
MX6UL_PAD_UART3_TX_DATA__GPIO1_IO24 0x0b0b0
MX6UL_PAD_NAND_RE_B__GPIO4_IO00 0x0b0b0
MX6UL_PAD_GPIO1_IO08__GPIO1_IO08 0x0b0b0
MX6UL_PAD_UART1_CTS_B__GPIO1_IO18 0x0b0b0
MX6UL_PAD_UART1_RTS_B__GPIO1_IO19 0x0b0b0
MX6UL_PAD_NAND_WE_B__GPIO4_IO01 0x0b0b0
MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x0b0b0
MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0
MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0
MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0
MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0
MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x0b0b0
MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x0b0b0
MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08 0x0b0b0
>;
};
pinctrl_gpio_keys: gpiokeysgrp {
fsl,pins = <
MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x0b0b0
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
>;
};
pinctrl_lcdif: lcdifgrp {
fsl,pins = <
MX6UL_PAD_LCD_CLK__LCDIF_CLK 0x100b1
MX6UL_PAD_LCD_ENABLE__LCDIF_ENABLE 0x100b1
MX6UL_PAD_LCD_HSYNC__LCDIF_HSYNC 0x100b1
MX6UL_PAD_LCD_VSYNC__LCDIF_VSYNC 0x100b1
MX6UL_PAD_LCD_DATA00__LCDIF_DATA00 0x100b1
MX6UL_PAD_LCD_DATA01__LCDIF_DATA01 0x100b1
MX6UL_PAD_LCD_DATA02__LCDIF_DATA02 0x100b1
MX6UL_PAD_LCD_DATA03__LCDIF_DATA03 0x100b1
MX6UL_PAD_LCD_DATA04__LCDIF_DATA04 0x100b1
MX6UL_PAD_LCD_DATA05__LCDIF_DATA05 0x100b1
MX6UL_PAD_LCD_DATA06__LCDIF_DATA06 0x100b1
MX6UL_PAD_LCD_DATA07__LCDIF_DATA07 0x100b1
MX6UL_PAD_LCD_DATA08__LCDIF_DATA08 0x100b1
MX6UL_PAD_LCD_DATA09__LCDIF_DATA09 0x100b1
MX6UL_PAD_LCD_DATA10__LCDIF_DATA10 0x100b1
MX6UL_PAD_LCD_DATA11__LCDIF_DATA11 0x100b1
MX6UL_PAD_LCD_DATA12__LCDIF_DATA12 0x100b1
MX6UL_PAD_LCD_DATA13__LCDIF_DATA13 0x100b1
MX6UL_PAD_LCD_DATA14__LCDIF_DATA14 0x100b1
MX6UL_PAD_LCD_DATA15__LCDIF_DATA15 0x100b1
MX6UL_PAD_LCD_DATA16__LCDIF_DATA16 0x100b1
MX6UL_PAD_LCD_DATA17__LCDIF_DATA17 0x100b1
>;
};
pinctrl_led: ledgrp {
fsl,pins = <
MX6UL_PAD_LCD_RESET__GPIO3_IO04 0x0b0b0
>;
};
pinctrl_pwm3: pwm3grp {
fsl,pins = <
MX6UL_PAD_NAND_ALE__PWM3_OUT 0x1b0b0
>;
};
pinctrl_tsc: tscgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO01__GPIO1_IO01 0xb0
MX6UL_PAD_GPIO1_IO02__GPIO1_IO02 0xb0
MX6UL_PAD_GPIO1_IO03__GPIO1_IO03 0xb0
MX6UL_PAD_GPIO1_IO04__GPIO1_IO04 0xb0
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6UL_PAD_UART2_TX_DATA__UART2_DCE_TX 0x1b0b1
MX6UL_PAD_UART2_RX_DATA__UART2_DCE_RX 0x1b0b1
>;
};
pinctrl_usbotg1_id: usbotg1idgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID 0x1b0b0
>;
};
pinctrl_usbotg1_vbus: usbotg1vbusgrp {
fsl,pins = <
MX6UL_PAD_GPIO1_IO05__GPIO1_IO05 0x1b0b0
>;
};
pinctrl_usbotg2_vbus: usbotg2vbusgrp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER9__GPIO5_IO09 0x1b0b0
>;
};
pinctrl_w1: w1grp {
fsl,pins = <
MX6UL_PAD_SNVS_TAMPER1__GPIO5_IO01 0x0b0b0
>;
};
};
Reference in New Issue View Git Blame Copy Permalink