OpenCloudOS-Kernel/include/linux/seqlock.h

1225 lines
38 KiB
C

/* SPDX-License-Identifier: GPL-2.0 */
#ifndef __LINUX_SEQLOCK_H
#define __LINUX_SEQLOCK_H
/*
* seqcount_t / seqlock_t - a reader-writer consistency mechanism with
* lockless readers (read-only retry loops), and no writer starvation.
*
* See Documentation/locking/seqlock.rst
*
* Copyrights:
* - Based on x86_64 vsyscall gettimeofday: Keith Owens, Andrea Arcangeli
* - Sequence counters with associated locks, (C) 2020 Linutronix GmbH
*/
#include <linux/compiler.h>
#include <linux/kcsan-checks.h>
#include <linux/lockdep.h>
#include <linux/mutex.h>
#include <linux/ww_mutex.h>
#include <linux/preempt.h>
#include <linux/spinlock.h>
#include <asm/processor.h>
/*
* The seqlock seqcount_t interface does not prescribe a precise sequence of
* read begin/retry/end. For readers, typically there is a call to
* read_seqcount_begin() and read_seqcount_retry(), however, there are more
* esoteric cases which do not follow this pattern.
*
* As a consequence, we take the following best-effort approach for raw usage
* via seqcount_t under KCSAN: upon beginning a seq-reader critical section,
* pessimistically mark the next KCSAN_SEQLOCK_REGION_MAX memory accesses as
* atomics; if there is a matching read_seqcount_retry() call, no following
* memory operations are considered atomic. Usage of the seqlock_t interface
* is not affected.
*/
#define KCSAN_SEQLOCK_REGION_MAX 1000
/*
* Sequence counters (seqcount_t)
*
* This is the raw counting mechanism, without any writer protection.
*
* Write side critical sections must be serialized and non-preemptible.
*
* If readers can be invoked from hardirq or softirq contexts,
* interrupts or bottom halves must also be respectively disabled before
* entering the write section.
*
* This mechanism can't be used if the protected data contains pointers,
* as the writer can invalidate a pointer that a reader is following.
*
* If the write serialization mechanism is one of the common kernel
* locking primitives, use a sequence counter with associated lock
* (seqcount_LOCKNAME_t) instead.
*
* If it's desired to automatically handle the sequence counter writer
* serialization and non-preemptibility requirements, use a sequential
* lock (seqlock_t) instead.
*
* See Documentation/locking/seqlock.rst
*/
typedef struct seqcount {
unsigned sequence;
#ifdef CONFIG_DEBUG_LOCK_ALLOC
struct lockdep_map dep_map;
#endif
} seqcount_t;
static inline void __seqcount_init(seqcount_t *s, const char *name,
struct lock_class_key *key)
{
/*
* Make sure we are not reinitializing a held lock:
*/
lockdep_init_map(&s->dep_map, name, key, 0);
s->sequence = 0;
}
#ifdef CONFIG_DEBUG_LOCK_ALLOC
# define SEQCOUNT_DEP_MAP_INIT(lockname) \
.dep_map = { .name = #lockname }
/**
* seqcount_init() - runtime initializer for seqcount_t
* @s: Pointer to the seqcount_t instance
*/
# define seqcount_init(s) \
do { \
static struct lock_class_key __key; \
__seqcount_init((s), #s, &__key); \
} while (0)
static inline void seqcount_lockdep_reader_access(const seqcount_t *s)
{
seqcount_t *l = (seqcount_t *)s;
unsigned long flags;
local_irq_save(flags);
seqcount_acquire_read(&l->dep_map, 0, 0, _RET_IP_);
seqcount_release(&l->dep_map, _RET_IP_);
local_irq_restore(flags);
}
#else
# define SEQCOUNT_DEP_MAP_INIT(lockname)
# define seqcount_init(s) __seqcount_init(s, NULL, NULL)
# define seqcount_lockdep_reader_access(x)
#endif
/**
* SEQCNT_ZERO() - static initializer for seqcount_t
* @name: Name of the seqcount_t instance
*/
#define SEQCNT_ZERO(name) { .sequence = 0, SEQCOUNT_DEP_MAP_INIT(name) }
/*
* Sequence counters with associated locks (seqcount_LOCKNAME_t)
*
* A sequence counter which associates the lock used for writer
* serialization at initialization time. This enables lockdep to validate
* that the write side critical section is properly serialized.
*
* For associated locks which do not implicitly disable preemption,
* preemption protection is enforced in the write side function.
*
* Lockdep is never used in any for the raw write variants.
*
* See Documentation/locking/seqlock.rst
*/
/*
* For PREEMPT_RT, seqcount_LOCKNAME_t write side critical sections cannot
* disable preemption. It can lead to higher latencies, and the write side
* sections will not be able to acquire locks which become sleeping locks
* (e.g. spinlock_t).
*
* To remain preemptible while avoiding a possible livelock caused by the
* reader preempting the writer, use a different technique: let the reader
* detect if a seqcount_LOCKNAME_t writer is in progress. If that is the
* case, acquire then release the associated LOCKNAME writer serialization
* lock. This will allow any possibly-preempted writer to make progress
* until the end of its writer serialization lock critical section.
*
* This lock-unlock technique must be implemented for all of PREEMPT_RT
* sleeping locks. See Documentation/locking/locktypes.rst
*/
#if defined(CONFIG_LOCKDEP) || defined(CONFIG_PREEMPT_RT)
#define __SEQ_LOCK(expr) expr
#else
#define __SEQ_LOCK(expr)
#endif
/*
* typedef seqcount_LOCKNAME_t - sequence counter with LOCKNAME associated
* @seqcount: The real sequence counter
* @lock: Pointer to the associated lock
*
* A plain sequence counter with external writer synchronization by
* LOCKNAME @lock. The lock is associated to the sequence counter in the
* static initializer or init function. This enables lockdep to validate
* that the write side critical section is properly serialized.
*
* LOCKNAME: raw_spinlock, spinlock, rwlock, mutex, or ww_mutex.
*/
/*
* seqcount_LOCKNAME_init() - runtime initializer for seqcount_LOCKNAME_t
* @s: Pointer to the seqcount_LOCKNAME_t instance
* @lock: Pointer to the associated lock
*/
#define seqcount_LOCKNAME_init(s, _lock, lockname) \
do { \
seqcount_##lockname##_t *____s = (s); \
seqcount_init(&____s->seqcount); \
__SEQ_LOCK(____s->lock = (_lock)); \
} while (0)
#define seqcount_raw_spinlock_init(s, lock) seqcount_LOCKNAME_init(s, lock, raw_spinlock)
#define seqcount_spinlock_init(s, lock) seqcount_LOCKNAME_init(s, lock, spinlock)
#define seqcount_rwlock_init(s, lock) seqcount_LOCKNAME_init(s, lock, rwlock);
#define seqcount_mutex_init(s, lock) seqcount_LOCKNAME_init(s, lock, mutex);
#define seqcount_ww_mutex_init(s, lock) seqcount_LOCKNAME_init(s, lock, ww_mutex);
/*
* SEQCOUNT_LOCKNAME() - Instantiate seqcount_LOCKNAME_t and helpers
* seqprop_LOCKNAME_*() - Property accessors for seqcount_LOCKNAME_t
*
* @lockname: "LOCKNAME" part of seqcount_LOCKNAME_t
* @locktype: LOCKNAME canonical C data type
* @preemptible: preemptibility of above locktype
* @lockmember: argument for lockdep_assert_held()
* @lockbase: associated lock release function (prefix only)
* @lock_acquire: associated lock acquisition function (full call)
*/
#define SEQCOUNT_LOCKNAME(lockname, locktype, preemptible, lockmember, lockbase, lock_acquire) \
typedef struct seqcount_##lockname { \
seqcount_t seqcount; \
__SEQ_LOCK(locktype *lock); \
} seqcount_##lockname##_t; \
\
static __always_inline seqcount_t * \
__seqprop_##lockname##_ptr(seqcount_##lockname##_t *s) \
{ \
return &s->seqcount; \
} \
\
static __always_inline unsigned \
__seqprop_##lockname##_sequence(const seqcount_##lockname##_t *s) \
{ \
unsigned seq = READ_ONCE(s->seqcount.sequence); \
\
if (!IS_ENABLED(CONFIG_PREEMPT_RT)) \
return seq; \
\
if (preemptible && unlikely(seq & 1)) { \
__SEQ_LOCK(lock_acquire); \
__SEQ_LOCK(lockbase##_unlock(s->lock)); \
\
/* \
* Re-read the sequence counter since the (possibly \
* preempted) writer made progress. \
*/ \
seq = READ_ONCE(s->seqcount.sequence); \
} \
\
return seq; \
} \
\
static __always_inline bool \
__seqprop_##lockname##_preemptible(const seqcount_##lockname##_t *s) \
{ \
if (!IS_ENABLED(CONFIG_PREEMPT_RT)) \
return preemptible; \
\
/* PREEMPT_RT relies on the above LOCK+UNLOCK */ \
return false; \
} \
\
static __always_inline void \
__seqprop_##lockname##_assert(const seqcount_##lockname##_t *s) \
{ \
__SEQ_LOCK(lockdep_assert_held(lockmember)); \
}
/*
* __seqprop() for seqcount_t
*/
static inline seqcount_t *__seqprop_ptr(seqcount_t *s)
{
return s;
}
static inline unsigned __seqprop_sequence(const seqcount_t *s)
{
return READ_ONCE(s->sequence);
}
static inline bool __seqprop_preemptible(const seqcount_t *s)
{
return false;
}
static inline void __seqprop_assert(const seqcount_t *s)
{
lockdep_assert_preemption_disabled();
}
#define __SEQ_RT IS_ENABLED(CONFIG_PREEMPT_RT)
SEQCOUNT_LOCKNAME(raw_spinlock, raw_spinlock_t, false, s->lock, raw_spin, raw_spin_lock(s->lock))
SEQCOUNT_LOCKNAME(spinlock, spinlock_t, __SEQ_RT, s->lock, spin, spin_lock(s->lock))
SEQCOUNT_LOCKNAME(rwlock, rwlock_t, __SEQ_RT, s->lock, read, read_lock(s->lock))
SEQCOUNT_LOCKNAME(mutex, struct mutex, true, s->lock, mutex, mutex_lock(s->lock))
SEQCOUNT_LOCKNAME(ww_mutex, struct ww_mutex, true, &s->lock->base, ww_mutex, ww_mutex_lock(s->lock, NULL))
/*
* SEQCNT_LOCKNAME_ZERO - static initializer for seqcount_LOCKNAME_t
* @name: Name of the seqcount_LOCKNAME_t instance
* @lock: Pointer to the associated LOCKNAME
*/
#define SEQCOUNT_LOCKNAME_ZERO(seq_name, assoc_lock) { \
.seqcount = SEQCNT_ZERO(seq_name.seqcount), \
__SEQ_LOCK(.lock = (assoc_lock)) \
}
#define SEQCNT_RAW_SPINLOCK_ZERO(name, lock) SEQCOUNT_LOCKNAME_ZERO(name, lock)
#define SEQCNT_SPINLOCK_ZERO(name, lock) SEQCOUNT_LOCKNAME_ZERO(name, lock)
#define SEQCNT_RWLOCK_ZERO(name, lock) SEQCOUNT_LOCKNAME_ZERO(name, lock)
#define SEQCNT_MUTEX_ZERO(name, lock) SEQCOUNT_LOCKNAME_ZERO(name, lock)
#define SEQCNT_WW_MUTEX_ZERO(name, lock) SEQCOUNT_LOCKNAME_ZERO(name, lock)
#define __seqprop_case(s, lockname, prop) \
seqcount_##lockname##_t: __seqprop_##lockname##_##prop((void *)(s))
#define __seqprop(s, prop) _Generic(*(s), \
seqcount_t: __seqprop_##prop((void *)(s)), \
__seqprop_case((s), raw_spinlock, prop), \
__seqprop_case((s), spinlock, prop), \
__seqprop_case((s), rwlock, prop), \
__seqprop_case((s), mutex, prop), \
__seqprop_case((s), ww_mutex, prop))
#define __seqcount_ptr(s) __seqprop(s, ptr)
#define __seqcount_sequence(s) __seqprop(s, sequence)
#define __seqcount_lock_preemptible(s) __seqprop(s, preemptible)
#define __seqcount_assert_lock_held(s) __seqprop(s, assert)
/**
* __read_seqcount_begin() - begin a seqcount_t read section w/o barrier
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*
* __read_seqcount_begin is like read_seqcount_begin, but has no smp_rmb()
* barrier. Callers should ensure that smp_rmb() or equivalent ordering is
* provided before actually loading any of the variables that are to be
* protected in this critical section.
*
* Use carefully, only in critical code, and comment how the barrier is
* provided.
*
* Return: count to be passed to read_seqcount_retry()
*/
#define __read_seqcount_begin(s) \
({ \
unsigned seq; \
\
while ((seq = __seqcount_sequence(s)) & 1) \
cpu_relax(); \
\
kcsan_atomic_next(KCSAN_SEQLOCK_REGION_MAX); \
seq; \
})
/**
* raw_read_seqcount_begin() - begin a seqcount_t read section w/o lockdep
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*
* Return: count to be passed to read_seqcount_retry()
*/
#define raw_read_seqcount_begin(s) \
({ \
unsigned seq = __read_seqcount_begin(s); \
\
smp_rmb(); \
seq; \
})
/**
* read_seqcount_begin() - begin a seqcount_t read critical section
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*
* Return: count to be passed to read_seqcount_retry()
*/
#define read_seqcount_begin(s) \
({ \
seqcount_lockdep_reader_access(__seqcount_ptr(s)); \
raw_read_seqcount_begin(s); \
})
/**
* raw_read_seqcount() - read the raw seqcount_t counter value
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*
* raw_read_seqcount opens a read critical section of the given
* seqcount_t, without any lockdep checking, and without checking or
* masking the sequence counter LSB. Calling code is responsible for
* handling that.
*
* Return: count to be passed to read_seqcount_retry()
*/
#define raw_read_seqcount(s) \
({ \
unsigned seq = __seqcount_sequence(s); \
\
smp_rmb(); \
kcsan_atomic_next(KCSAN_SEQLOCK_REGION_MAX); \
seq; \
})
/**
* raw_seqcount_begin() - begin a seqcount_t read critical section w/o
* lockdep and w/o counter stabilization
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*
* raw_seqcount_begin opens a read critical section of the given
* seqcount_t. Unlike read_seqcount_begin(), this function will not wait
* for the count to stabilize. If a writer is active when it begins, it
* will fail the read_seqcount_retry() at the end of the read critical
* section instead of stabilizing at the beginning of it.
*
* Use this only in special kernel hot paths where the read section is
* small and has a high probability of success through other external
* means. It will save a single branching instruction.
*
* Return: count to be passed to read_seqcount_retry()
*/
#define raw_seqcount_begin(s) \
({ \
/* \
* If the counter is odd, let read_seqcount_retry() fail \
* by decrementing the counter. \
*/ \
raw_read_seqcount(s) & ~1; \
})
/**
* __read_seqcount_retry() - end a seqcount_t read section w/o barrier
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
* @start: count, from read_seqcount_begin()
*
* __read_seqcount_retry is like read_seqcount_retry, but has no smp_rmb()
* barrier. Callers should ensure that smp_rmb() or equivalent ordering is
* provided before actually loading any of the variables that are to be
* protected in this critical section.
*
* Use carefully, only in critical code, and comment how the barrier is
* provided.
*
* Return: true if a read section retry is required, else false
*/
#define __read_seqcount_retry(s, start) \
__read_seqcount_t_retry(__seqcount_ptr(s), start)
static inline int __read_seqcount_t_retry(const seqcount_t *s, unsigned start)
{
kcsan_atomic_next(0);
return unlikely(READ_ONCE(s->sequence) != start);
}
/**
* read_seqcount_retry() - end a seqcount_t read critical section
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
* @start: count, from read_seqcount_begin()
*
* read_seqcount_retry closes the read critical section of given
* seqcount_t. If the critical section was invalid, it must be ignored
* (and typically retried).
*
* Return: true if a read section retry is required, else false
*/
#define read_seqcount_retry(s, start) \
read_seqcount_t_retry(__seqcount_ptr(s), start)
static inline int read_seqcount_t_retry(const seqcount_t *s, unsigned start)
{
smp_rmb();
return __read_seqcount_t_retry(s, start);
}
/**
* raw_write_seqcount_begin() - start a seqcount_t write section w/o lockdep
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*/
#define raw_write_seqcount_begin(s) \
do { \
if (__seqcount_lock_preemptible(s)) \
preempt_disable(); \
\
raw_write_seqcount_t_begin(__seqcount_ptr(s)); \
} while (0)
static inline void raw_write_seqcount_t_begin(seqcount_t *s)
{
kcsan_nestable_atomic_begin();
s->sequence++;
smp_wmb();
}
/**
* raw_write_seqcount_end() - end a seqcount_t write section w/o lockdep
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*/
#define raw_write_seqcount_end(s) \
do { \
raw_write_seqcount_t_end(__seqcount_ptr(s)); \
\
if (__seqcount_lock_preemptible(s)) \
preempt_enable(); \
} while (0)
static inline void raw_write_seqcount_t_end(seqcount_t *s)
{
smp_wmb();
s->sequence++;
kcsan_nestable_atomic_end();
}
/**
* write_seqcount_begin_nested() - start a seqcount_t write section with
* custom lockdep nesting level
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
* @subclass: lockdep nesting level
*
* See Documentation/locking/lockdep-design.rst
*/
#define write_seqcount_begin_nested(s, subclass) \
do { \
__seqcount_assert_lock_held(s); \
\
if (__seqcount_lock_preemptible(s)) \
preempt_disable(); \
\
write_seqcount_t_begin_nested(__seqcount_ptr(s), subclass); \
} while (0)
static inline void write_seqcount_t_begin_nested(seqcount_t *s, int subclass)
{
raw_write_seqcount_t_begin(s);
seqcount_acquire(&s->dep_map, subclass, 0, _RET_IP_);
}
/**
* write_seqcount_begin() - start a seqcount_t write side critical section
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*
* write_seqcount_begin opens a write side critical section of the given
* seqcount_t.
*
* Context: seqcount_t write side critical sections must be serialized and
* non-preemptible. If readers can be invoked from hardirq or softirq
* context, interrupts or bottom halves must be respectively disabled.
*/
#define write_seqcount_begin(s) \
do { \
__seqcount_assert_lock_held(s); \
\
if (__seqcount_lock_preemptible(s)) \
preempt_disable(); \
\
write_seqcount_t_begin(__seqcount_ptr(s)); \
} while (0)
static inline void write_seqcount_t_begin(seqcount_t *s)
{
write_seqcount_t_begin_nested(s, 0);
}
/**
* write_seqcount_end() - end a seqcount_t write side critical section
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*
* The write section must've been opened with write_seqcount_begin().
*/
#define write_seqcount_end(s) \
do { \
write_seqcount_t_end(__seqcount_ptr(s)); \
\
if (__seqcount_lock_preemptible(s)) \
preempt_enable(); \
} while (0)
static inline void write_seqcount_t_end(seqcount_t *s)
{
seqcount_release(&s->dep_map, _RET_IP_);
raw_write_seqcount_t_end(s);
}
/**
* raw_write_seqcount_barrier() - do a seqcount_t write barrier
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*
* This can be used to provide an ordering guarantee instead of the usual
* consistency guarantee. It is one wmb cheaper, because it can collapse
* the two back-to-back wmb()s.
*
* Note that writes surrounding the barrier should be declared atomic (e.g.
* via WRITE_ONCE): a) to ensure the writes become visible to other threads
* atomically, avoiding compiler optimizations; b) to document which writes are
* meant to propagate to the reader critical section. This is necessary because
* neither writes before and after the barrier are enclosed in a seq-writer
* critical section that would ensure readers are aware of ongoing writes::
*
* seqcount_t seq;
* bool X = true, Y = false;
*
* void read(void)
* {
* bool x, y;
*
* do {
* int s = read_seqcount_begin(&seq);
*
* x = X; y = Y;
*
* } while (read_seqcount_retry(&seq, s));
*
* BUG_ON(!x && !y);
* }
*
* void write(void)
* {
* WRITE_ONCE(Y, true);
*
* raw_write_seqcount_barrier(seq);
*
* WRITE_ONCE(X, false);
* }
*/
#define raw_write_seqcount_barrier(s) \
raw_write_seqcount_t_barrier(__seqcount_ptr(s))
static inline void raw_write_seqcount_t_barrier(seqcount_t *s)
{
kcsan_nestable_atomic_begin();
s->sequence++;
smp_wmb();
s->sequence++;
kcsan_nestable_atomic_end();
}
/**
* write_seqcount_invalidate() - invalidate in-progress seqcount_t read
* side operations
* @s: Pointer to seqcount_t or any of the seqcount_LOCKNAME_t variants
*
* After write_seqcount_invalidate, no seqcount_t read side operations
* will complete successfully and see data older than this.
*/
#define write_seqcount_invalidate(s) \
write_seqcount_t_invalidate(__seqcount_ptr(s))
static inline void write_seqcount_t_invalidate(seqcount_t *s)
{
smp_wmb();
kcsan_nestable_atomic_begin();
s->sequence+=2;
kcsan_nestable_atomic_end();
}
/*
* Latch sequence counters (seqcount_latch_t)
*
* A sequence counter variant where the counter even/odd value is used to
* switch between two copies of protected data. This allows the read path,
* typically NMIs, to safely interrupt the write side critical section.
*
* As the write sections are fully preemptible, no special handling for
* PREEMPT_RT is needed.
*/
typedef struct {
seqcount_t seqcount;
} seqcount_latch_t;
/**
* SEQCNT_LATCH_ZERO() - static initializer for seqcount_latch_t
* @seq_name: Name of the seqcount_latch_t instance
*/
#define SEQCNT_LATCH_ZERO(seq_name) { \
.seqcount = SEQCNT_ZERO(seq_name.seqcount), \
}
/**
* seqcount_latch_init() - runtime initializer for seqcount_latch_t
* @s: Pointer to the seqcount_latch_t instance
*/
static inline void seqcount_latch_init(seqcount_latch_t *s)
{
seqcount_init(&s->seqcount);
}
/**
* raw_read_seqcount_latch() - pick even/odd latch data copy
* @s: Pointer to seqcount_latch_t
*
* See raw_write_seqcount_latch() for details and a full reader/writer
* usage example.
*
* Return: sequence counter raw value. Use the lowest bit as an index for
* picking which data copy to read. The full counter must then be checked
* with read_seqcount_latch_retry().
*/
static inline unsigned raw_read_seqcount_latch(const seqcount_latch_t *s)
{
/*
* Pairs with the first smp_wmb() in raw_write_seqcount_latch().
* Due to the dependent load, a full smp_rmb() is not needed.
*/
return READ_ONCE(s->seqcount.sequence);
}
/**
* read_seqcount_latch_retry() - end a seqcount_latch_t read section
* @s: Pointer to seqcount_latch_t
* @start: count, from raw_read_seqcount_latch()
*
* Return: true if a read section retry is required, else false
*/
static inline int
read_seqcount_latch_retry(const seqcount_latch_t *s, unsigned start)
{
return read_seqcount_retry(&s->seqcount, start);
}
/**
* raw_write_seqcount_latch() - redirect latch readers to even/odd copy
* @s: Pointer to seqcount_latch_t
*
* The latch technique is a multiversion concurrency control method that allows
* queries during non-atomic modifications. If you can guarantee queries never
* interrupt the modification -- e.g. the concurrency is strictly between CPUs
* -- you most likely do not need this.
*
* Where the traditional RCU/lockless data structures rely on atomic
* modifications to ensure queries observe either the old or the new state the
* latch allows the same for non-atomic updates. The trade-off is doubling the
* cost of storage; we have to maintain two copies of the entire data
* structure.
*
* Very simply put: we first modify one copy and then the other. This ensures
* there is always one copy in a stable state, ready to give us an answer.
*
* The basic form is a data structure like::
*
* struct latch_struct {
* seqcount_latch_t seq;
* struct data_struct data[2];
* };
*
* Where a modification, which is assumed to be externally serialized, does the
* following::
*
* void latch_modify(struct latch_struct *latch, ...)
* {
* smp_wmb(); // Ensure that the last data[1] update is visible
* latch->seq.sequence++;
* smp_wmb(); // Ensure that the seqcount update is visible
*
* modify(latch->data[0], ...);
*
* smp_wmb(); // Ensure that the data[0] update is visible
* latch->seq.sequence++;
* smp_wmb(); // Ensure that the seqcount update is visible
*
* modify(latch->data[1], ...);
* }
*
* The query will have a form like::
*
* struct entry *latch_query(struct latch_struct *latch, ...)
* {
* struct entry *entry;
* unsigned seq, idx;
*
* do {
* seq = raw_read_seqcount_latch(&latch->seq);
*
* idx = seq & 0x01;
* entry = data_query(latch->data[idx], ...);
*
* // This includes needed smp_rmb()
* } while (read_seqcount_latch_retry(&latch->seq, seq));
*
* return entry;
* }
*
* So during the modification, queries are first redirected to data[1]. Then we
* modify data[0]. When that is complete, we redirect queries back to data[0]
* and we can modify data[1].
*
* NOTE:
*
* The non-requirement for atomic modifications does _NOT_ include
* the publishing of new entries in the case where data is a dynamic
* data structure.
*
* An iteration might start in data[0] and get suspended long enough
* to miss an entire modification sequence, once it resumes it might
* observe the new entry.
*
* NOTE2:
*
* When data is a dynamic data structure; one should use regular RCU
* patterns to manage the lifetimes of the objects within.
*/
static inline void raw_write_seqcount_latch(seqcount_latch_t *s)
{
smp_wmb(); /* prior stores before incrementing "sequence" */
s->seqcount.sequence++;
smp_wmb(); /* increment "sequence" before following stores */
}
/*
* Sequential locks (seqlock_t)
*
* Sequence counters with an embedded spinlock for writer serialization
* and non-preemptibility.
*
* For more info, see:
* - Comments on top of seqcount_t
* - Documentation/locking/seqlock.rst
*/
typedef struct {
/*
* Make sure that readers don't starve writers on PREEMPT_RT: use
* seqcount_spinlock_t instead of seqcount_t. Check __SEQ_LOCK().
*/
seqcount_spinlock_t seqcount;
spinlock_t lock;
} seqlock_t;
#define __SEQLOCK_UNLOCKED(lockname) \
{ \
.seqcount = SEQCNT_SPINLOCK_ZERO(lockname, &(lockname).lock), \
.lock = __SPIN_LOCK_UNLOCKED(lockname) \
}
/**
* seqlock_init() - dynamic initializer for seqlock_t
* @sl: Pointer to the seqlock_t instance
*/
#define seqlock_init(sl) \
do { \
spin_lock_init(&(sl)->lock); \
seqcount_spinlock_init(&(sl)->seqcount, &(sl)->lock); \
} while (0)
/**
* DEFINE_SEQLOCK(sl) - Define a statically allocated seqlock_t
* @sl: Name of the seqlock_t instance
*/
#define DEFINE_SEQLOCK(sl) \
seqlock_t sl = __SEQLOCK_UNLOCKED(sl)
/**
* read_seqbegin() - start a seqlock_t read side critical section
* @sl: Pointer to seqlock_t
*
* Return: count, to be passed to read_seqretry()
*/
static inline unsigned read_seqbegin(const seqlock_t *sl)
{
unsigned ret = read_seqcount_begin(&sl->seqcount);
kcsan_atomic_next(0); /* non-raw usage, assume closing read_seqretry() */
kcsan_flat_atomic_begin();
return ret;
}
/**
* read_seqretry() - end a seqlock_t read side section
* @sl: Pointer to seqlock_t
* @start: count, from read_seqbegin()
*
* read_seqretry closes the read side critical section of given seqlock_t.
* If the critical section was invalid, it must be ignored (and typically
* retried).
*
* Return: true if a read section retry is required, else false
*/
static inline unsigned read_seqretry(const seqlock_t *sl, unsigned start)
{
/*
* Assume not nested: read_seqretry() may be called multiple times when
* completing read critical section.
*/
kcsan_flat_atomic_end();
return read_seqcount_retry(&sl->seqcount, start);
}
/*
* For all seqlock_t write side functions, use write_seqcount_*t*_begin()
* instead of the generic write_seqcount_begin(). This way, no redundant
* lockdep_assert_held() checks are added.
*/
/**
* write_seqlock() - start a seqlock_t write side critical section
* @sl: Pointer to seqlock_t
*
* write_seqlock opens a write side critical section for the given
* seqlock_t. It also implicitly acquires the spinlock_t embedded inside
* that sequential lock. All seqlock_t write side sections are thus
* automatically serialized and non-preemptible.
*
* Context: if the seqlock_t read section, or other write side critical
* sections, can be invoked from hardirq or softirq contexts, use the
* _irqsave or _bh variants of this function instead.
*/
static inline void write_seqlock(seqlock_t *sl)
{
spin_lock(&sl->lock);
write_seqcount_t_begin(&sl->seqcount.seqcount);
}
/**
* write_sequnlock() - end a seqlock_t write side critical section
* @sl: Pointer to seqlock_t
*
* write_sequnlock closes the (serialized and non-preemptible) write side
* critical section of given seqlock_t.
*/
static inline void write_sequnlock(seqlock_t *sl)
{
write_seqcount_t_end(&sl->seqcount.seqcount);
spin_unlock(&sl->lock);
}
/**
* write_seqlock_bh() - start a softirqs-disabled seqlock_t write section
* @sl: Pointer to seqlock_t
*
* _bh variant of write_seqlock(). Use only if the read side section, or
* other write side sections, can be invoked from softirq contexts.
*/
static inline void write_seqlock_bh(seqlock_t *sl)
{
spin_lock_bh(&sl->lock);
write_seqcount_t_begin(&sl->seqcount.seqcount);
}
/**
* write_sequnlock_bh() - end a softirqs-disabled seqlock_t write section
* @sl: Pointer to seqlock_t
*
* write_sequnlock_bh closes the serialized, non-preemptible, and
* softirqs-disabled, seqlock_t write side critical section opened with
* write_seqlock_bh().
*/
static inline void write_sequnlock_bh(seqlock_t *sl)
{
write_seqcount_t_end(&sl->seqcount.seqcount);
spin_unlock_bh(&sl->lock);
}
/**
* write_seqlock_irq() - start a non-interruptible seqlock_t write section
* @sl: Pointer to seqlock_t
*
* _irq variant of write_seqlock(). Use only if the read side section, or
* other write sections, can be invoked from hardirq contexts.
*/
static inline void write_seqlock_irq(seqlock_t *sl)
{
spin_lock_irq(&sl->lock);
write_seqcount_t_begin(&sl->seqcount.seqcount);
}
/**
* write_sequnlock_irq() - end a non-interruptible seqlock_t write section
* @sl: Pointer to seqlock_t
*
* write_sequnlock_irq closes the serialized and non-interruptible
* seqlock_t write side section opened with write_seqlock_irq().
*/
static inline void write_sequnlock_irq(seqlock_t *sl)
{
write_seqcount_t_end(&sl->seqcount.seqcount);
spin_unlock_irq(&sl->lock);
}
static inline unsigned long __write_seqlock_irqsave(seqlock_t *sl)
{
unsigned long flags;
spin_lock_irqsave(&sl->lock, flags);
write_seqcount_t_begin(&sl->seqcount.seqcount);
return flags;
}
/**
* write_seqlock_irqsave() - start a non-interruptible seqlock_t write
* section
* @lock: Pointer to seqlock_t
* @flags: Stack-allocated storage for saving caller's local interrupt
* state, to be passed to write_sequnlock_irqrestore().
*
* _irqsave variant of write_seqlock(). Use it only if the read side
* section, or other write sections, can be invoked from hardirq context.
*/
#define write_seqlock_irqsave(lock, flags) \
do { flags = __write_seqlock_irqsave(lock); } while (0)
/**
* write_sequnlock_irqrestore() - end non-interruptible seqlock_t write
* section
* @sl: Pointer to seqlock_t
* @flags: Caller's saved interrupt state, from write_seqlock_irqsave()
*
* write_sequnlock_irqrestore closes the serialized and non-interruptible
* seqlock_t write section previously opened with write_seqlock_irqsave().
*/
static inline void
write_sequnlock_irqrestore(seqlock_t *sl, unsigned long flags)
{
write_seqcount_t_end(&sl->seqcount.seqcount);
spin_unlock_irqrestore(&sl->lock, flags);
}
/**
* read_seqlock_excl() - begin a seqlock_t locking reader section
* @sl: Pointer to seqlock_t
*
* read_seqlock_excl opens a seqlock_t locking reader critical section. A
* locking reader exclusively locks out *both* other writers *and* other
* locking readers, but it does not update the embedded sequence number.
*
* Locking readers act like a normal spin_lock()/spin_unlock().
*
* Context: if the seqlock_t write section, *or other read sections*, can
* be invoked from hardirq or softirq contexts, use the _irqsave or _bh
* variant of this function instead.
*
* The opened read section must be closed with read_sequnlock_excl().
*/
static inline void read_seqlock_excl(seqlock_t *sl)
{
spin_lock(&sl->lock);
}
/**
* read_sequnlock_excl() - end a seqlock_t locking reader critical section
* @sl: Pointer to seqlock_t
*/
static inline void read_sequnlock_excl(seqlock_t *sl)
{
spin_unlock(&sl->lock);
}
/**
* read_seqlock_excl_bh() - start a seqlock_t locking reader section with
* softirqs disabled
* @sl: Pointer to seqlock_t
*
* _bh variant of read_seqlock_excl(). Use this variant only if the
* seqlock_t write side section, *or other read sections*, can be invoked
* from softirq contexts.
*/
static inline void read_seqlock_excl_bh(seqlock_t *sl)
{
spin_lock_bh(&sl->lock);
}
/**
* read_sequnlock_excl_bh() - stop a seqlock_t softirq-disabled locking
* reader section
* @sl: Pointer to seqlock_t
*/
static inline void read_sequnlock_excl_bh(seqlock_t *sl)
{
spin_unlock_bh(&sl->lock);
}
/**
* read_seqlock_excl_irq() - start a non-interruptible seqlock_t locking
* reader section
* @sl: Pointer to seqlock_t
*
* _irq variant of read_seqlock_excl(). Use this only if the seqlock_t
* write side section, *or other read sections*, can be invoked from a
* hardirq context.
*/
static inline void read_seqlock_excl_irq(seqlock_t *sl)
{
spin_lock_irq(&sl->lock);
}
/**
* read_sequnlock_excl_irq() - end an interrupts-disabled seqlock_t
* locking reader section
* @sl: Pointer to seqlock_t
*/
static inline void read_sequnlock_excl_irq(seqlock_t *sl)
{
spin_unlock_irq(&sl->lock);
}
static inline unsigned long __read_seqlock_excl_irqsave(seqlock_t *sl)
{
unsigned long flags;
spin_lock_irqsave(&sl->lock, flags);
return flags;
}
/**
* read_seqlock_excl_irqsave() - start a non-interruptible seqlock_t
* locking reader section
* @lock: Pointer to seqlock_t
* @flags: Stack-allocated storage for saving caller's local interrupt
* state, to be passed to read_sequnlock_excl_irqrestore().
*
* _irqsave variant of read_seqlock_excl(). Use this only if the seqlock_t
* write side section, *or other read sections*, can be invoked from a
* hardirq context.
*/
#define read_seqlock_excl_irqsave(lock, flags) \
do { flags = __read_seqlock_excl_irqsave(lock); } while (0)
/**
* read_sequnlock_excl_irqrestore() - end non-interruptible seqlock_t
* locking reader section
* @sl: Pointer to seqlock_t
* @flags: Caller saved interrupt state, from read_seqlock_excl_irqsave()
*/
static inline void
read_sequnlock_excl_irqrestore(seqlock_t *sl, unsigned long flags)
{
spin_unlock_irqrestore(&sl->lock, flags);
}
/**
* read_seqbegin_or_lock() - begin a seqlock_t lockless or locking reader
* @lock: Pointer to seqlock_t
* @seq : Marker and return parameter. If the passed value is even, the
* reader will become a *lockless* seqlock_t reader as in read_seqbegin().
* If the passed value is odd, the reader will become a *locking* reader
* as in read_seqlock_excl(). In the first call to this function, the
* caller *must* initialize and pass an even value to @seq; this way, a
* lockless read can be optimistically tried first.
*
* read_seqbegin_or_lock is an API designed to optimistically try a normal
* lockless seqlock_t read section first. If an odd counter is found, the
* lockless read trial has failed, and the next read iteration transforms
* itself into a full seqlock_t locking reader.
*
* This is typically used to avoid seqlock_t lockless readers starvation
* (too much retry loops) in the case of a sharp spike in write side
* activity.
*
* Context: if the seqlock_t write section, *or other read sections*, can
* be invoked from hardirq or softirq contexts, use the _irqsave or _bh
* variant of this function instead.
*
* Check Documentation/locking/seqlock.rst for template example code.
*
* Return: the encountered sequence counter value, through the @seq
* parameter, which is overloaded as a return parameter. This returned
* value must be checked with need_seqretry(). If the read section need to
* be retried, this returned value must also be passed as the @seq
* parameter of the next read_seqbegin_or_lock() iteration.
*/
static inline void read_seqbegin_or_lock(seqlock_t *lock, int *seq)
{
if (!(*seq & 1)) /* Even */
*seq = read_seqbegin(lock);
else /* Odd */
read_seqlock_excl(lock);
}
/**
* need_seqretry() - validate seqlock_t "locking or lockless" read section
* @lock: Pointer to seqlock_t
* @seq: sequence count, from read_seqbegin_or_lock()
*
* Return: true if a read section retry is required, false otherwise
*/
static inline int need_seqretry(seqlock_t *lock, int seq)
{
return !(seq & 1) && read_seqretry(lock, seq);
}
/**
* done_seqretry() - end seqlock_t "locking or lockless" reader section
* @lock: Pointer to seqlock_t
* @seq: count, from read_seqbegin_or_lock()
*
* done_seqretry finishes the seqlock_t read side critical section started
* with read_seqbegin_or_lock() and validated by need_seqretry().
*/
static inline void done_seqretry(seqlock_t *lock, int seq)
{
if (seq & 1)
read_sequnlock_excl(lock);
}
/**
* read_seqbegin_or_lock_irqsave() - begin a seqlock_t lockless reader, or
* a non-interruptible locking reader
* @lock: Pointer to seqlock_t
* @seq: Marker and return parameter. Check read_seqbegin_or_lock().
*
* This is the _irqsave variant of read_seqbegin_or_lock(). Use it only if
* the seqlock_t write section, *or other read sections*, can be invoked
* from hardirq context.
*
* Note: Interrupts will be disabled only for "locking reader" mode.
*
* Return:
*
* 1. The saved local interrupts state in case of a locking reader, to
* be passed to done_seqretry_irqrestore().
*
* 2. The encountered sequence counter value, returned through @seq
* overloaded as a return parameter. Check read_seqbegin_or_lock().
*/
static inline unsigned long
read_seqbegin_or_lock_irqsave(seqlock_t *lock, int *seq)
{
unsigned long flags = 0;
if (!(*seq & 1)) /* Even */
*seq = read_seqbegin(lock);
else /* Odd */
read_seqlock_excl_irqsave(lock, flags);
return flags;
}
/**
* done_seqretry_irqrestore() - end a seqlock_t lockless reader, or a
* non-interruptible locking reader section
* @lock: Pointer to seqlock_t
* @seq: Count, from read_seqbegin_or_lock_irqsave()
* @flags: Caller's saved local interrupt state in case of a locking
* reader, also from read_seqbegin_or_lock_irqsave()
*
* This is the _irqrestore variant of done_seqretry(). The read section
* must've been opened with read_seqbegin_or_lock_irqsave(), and validated
* by need_seqretry().
*/
static inline void
done_seqretry_irqrestore(seqlock_t *lock, int seq, unsigned long flags)
{
if (seq & 1)
read_sequnlock_excl_irqrestore(lock, flags);
}
#endif /* __LINUX_SEQLOCK_H */