OpenCloudOS-Kernel/drivers/usb
Adrian Taylor c1479a92cf USB: Exposing second ACM channel as tty for Nokia S60 phones.
Nokia S60 phones expose two ACM channels. The first is a modem and is picked
up by the standard AT-command interface information in the CDC-ACM driver. The
second is marked as having a vendor-specific protocol. Normally, we don't
expose those as ttys. (On some other devices, they may be claimed by the
rndis_host driver and used as a network interface).

But on S60 this second ACM channel is the way that third-party S60 application
developers are expected to communicate over USB. It acts as a serial device
at the S60 end, and so it should on Linux too.

The list of devices is largely derived from:
http://wiki.forum.nokia.com/index.php/S60_Platform_and_device_identification_codes
http://wiki.forum.nokia.com/index.php/Nokia_USB_Product_IDs
and includes only the S60 3rd Edition+ devices documented there.

There are many devices for which the USB device ID is not documented,
including:
    Nokia 6290
    Nokia E63
    Nokia 5630 XpressMusic
    Nokia 5730 XpressMusic
    Nokia 6710 Navigator
    Nokia 6720 classic
    Nokia 6730 Classic
    Nokia 6760 slide
    Nokia 6790 slide
    Nokia 6790 Surge
    Nokia E52
    Nokia E55
    Nokia E71x (AT&T)
    Nokia E72
    Nokia E75
    Nokia E75 US+LTA variant
    Nokia N79
    Nokia N86 8MP
    Nokia 5230 (RM-588)
    Nokia 5230 (RM-594)
    Nokia 5530 XpressMusic
    Nokia 5530 XpressMusic (china)
    Nokia 5800 XM
    Nokia N97 (RM-506)
    Nokia N97 mini
    Nokia X6
It would be good to add those subsequently.

Signed-off-by: Adrian Taylor <aat@realvnc.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-12-11 11:55:20 -08:00
..
atm tree-wide: fix assorted typos all over the place 2009-12-04 15:39:55 +01:00
c67x00 usb/c67x00 endianness annotations 2008-06-04 08:06:01 -07:00
class USB: Exposing second ACM channel as tty for Nokia S60 phones. 2009-12-11 11:55:20 -08:00
core USB: Check results of dma_map_single 2009-12-11 11:55:20 -08:00
early USB: ehci-dbgp: errata for EHCI debug/host controller synchronization 2009-09-23 06:46:38 -07:00
gadget USB: Interface Association Descriptors added to CDC & RNDIS 2009-12-11 11:55:19 -08:00
host USB: EHCI: add native scatter-gather support 2009-12-11 11:55:19 -08:00
image USB: remove unneeded printks from microtek driver 2009-09-23 06:46:34 -07:00
misc USB: usblcd, fix memory leak 2009-10-09 13:52:06 -07:00
mon USB: add scatter-gather support to usbmon 2009-12-11 11:55:20 -08:00
musb Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 2009-12-08 08:15:29 -08:00
otg USB OTG: Add generic driver for ULPI OTG transceiver 2009-12-11 11:55:16 -08:00
serial USB: serial: sierra driver memory reduction 2009-12-11 11:55:19 -08:00
storage USB: make urb scatter-gather support more generic 2009-12-11 11:55:14 -08:00
wusbcore USB: wusb: add wusb_phy_rate sysfs file to host controllers 2009-12-11 11:55:16 -08:00
Kconfig USB: ehci: Allow EHCI to be built on OMAP3 2009-12-11 11:55:20 -08:00
Makefile USB OTG: Add generic driver for ULPI OTG transceiver 2009-12-11 11:55:16 -08:00
README USB: fix directory references in usb/README 2007-11-28 13:58:34 -08:00
usb-skeleton.c USB: skeleton: Correct use of ! and & 2009-12-11 11:55:14 -08:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.