Peng Chen 2096ae6ca6 Bluetooth: add support for atheros 0489:e057 ... Add support for the AR3012 chip found on Fioxconn. usb-devices shows: T: Bus=06 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 44 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0489 ProdID=e057 Rev= 0.02 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms Signed-off-by: Peng Chen <pengchen@qca.qualcomm.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>		2012-08-06 15:33:05 -03:00
..
Kconfig	Bluetooth: Initial skeleton for Three-wire UART (H5) support	2012-07-17 14:33:20 -03:00
Makefile	Bluetooth: Initial skeleton for Three-wire UART (H5) support	2012-07-17 14:33:20 -03:00
ath3k.c	Bluetooth: add support for atheros 0489:e057	2012-08-06 15:33:05 -03:00
bcm203x.c	USB: Disable hub-initiated LPM for comms devices.	2012-05-18 15:42:55 -07:00
bfusb.c	USB: Disable hub-initiated LPM for comms devices.	2012-05-18 15:42:55 -07:00
bluecard_cs.c	Bluetooth: bluecard_cs: Shorten scope for iobase	2012-06-30 12:33:06 -03:00
bpa10x.c	Bluetooth: Rename HCI_QUIRK_NO_RESET to HCI_QUIRK_RESET_ON_CLOSE	2012-06-05 06:34:06 +03:00
bt3c_cs.c	Bluetooth: Fix warning: using int as NULL pointer	2012-06-30 12:07:14 -03:00
btmrvl_debugfs.c	simple_open: automatically convert to simple_open()	2012-04-05 15:25:50 -07:00
btmrvl_drv.h	Bluetooth: btmrvl: Do not send vendor events to bluetooth stack	2012-06-19 00:19:11 -03:00
btmrvl_main.c	Bluetooth: btmrvl: trivial style fixes	2012-07-09 09:45:10 -03:00
btmrvl_sdio.c	Bluetooth: btmrvl: trivial style fixes	2012-07-09 09:45:10 -03:00
btmrvl_sdio.h	Bluetooth: btmrvl: support Marvell Bluetooth device SD8787	2011-04-13 12:20:05 -03:00
btsdio.c	Bluetooth: Remove hci_dev->driver_data	2012-02-13 17:01:37 +02:00
btuart_cs.c	Bluetooth: Fix warning: using int as NULL pointer	2012-06-30 12:07:14 -03:00
btusb.c	Bluetooth: add support for atheros 0489:e057	2012-08-06 15:33:05 -03:00
btwilink.c	Bluetooth: Remove hci_dev->driver_data	2012-02-13 17:01:37 +02:00
dtl1_cs.c	Bluetooth: cleanup dtl1_config	2012-06-30 11:44:36 -03:00
hci_ath.c	Bluetooth: hci-uart-ath: Use GFP_ATOMIC in open()	2012-02-13 17:01:22 +02:00
hci_bcsp.c	Bluetooth: Remove 'register' usage from the subsystem	2012-06-05 06:34:07 +03:00
hci_h4.c	Bluetooth: Remove 'register' usage from the subsystem	2012-06-05 06:34:07 +03:00
hci_h5.c	Bluetooth: Introduce a flags variable to Three-wire UART state	2012-07-17 14:49:24 -03:00
hci_ldisc.c	Bluetooth: Add delayed init sequence support for UART controllers	2012-07-17 14:48:29 -03:00
hci_ll.c	Bluetooth: Remove 'register' usage from the subsystem	2012-06-05 06:34:07 +03:00
hci_uart.h	Bluetooth: Add delayed init sequence support for UART controllers	2012-07-17 14:48:29 -03:00
hci_vhci.c	Bluetooth: vhci: Ignore return code of nonseekable_open()	2012-05-09 00:41:36 -03:00