396 lines
11 KiB
C
396 lines
11 KiB
C
/*
|
|
* Copyright (C) ST-Ericsson SA 2010
|
|
* Author: Shujuan Chen (shujuan.chen@stericsson.com)
|
|
* Author: Joakim Bech (joakim.xx.bech@stericsson.com)
|
|
* Author: Berne Hebark (berne.hebark@stericsson.com))
|
|
* License terms: GNU General Public License (GPL) version 2
|
|
*/
|
|
#ifndef _HASH_ALG_H
|
|
#define _HASH_ALG_H
|
|
|
|
#include <linux/bitops.h>
|
|
|
|
#define HASH_BLOCK_SIZE 64
|
|
#define HASH_DMA_ALIGN_SIZE 4
|
|
#define HASH_DMA_PERFORMANCE_MIN_SIZE 1024
|
|
#define HASH_BYTES_PER_WORD 4
|
|
|
|
/* Maximum value of the length's high word */
|
|
#define HASH_HIGH_WORD_MAX_VAL 0xFFFFFFFFUL
|
|
|
|
/* Power on Reset values HASH registers */
|
|
#define HASH_RESET_CR_VALUE 0x0
|
|
#define HASH_RESET_STR_VALUE 0x0
|
|
|
|
/* Number of context swap registers */
|
|
#define HASH_CSR_COUNT 52
|
|
|
|
#define HASH_RESET_CSRX_REG_VALUE 0x0
|
|
#define HASH_RESET_CSFULL_REG_VALUE 0x0
|
|
#define HASH_RESET_CSDATAIN_REG_VALUE 0x0
|
|
|
|
#define HASH_RESET_INDEX_VAL 0x0
|
|
#define HASH_RESET_BIT_INDEX_VAL 0x0
|
|
#define HASH_RESET_BUFFER_VAL 0x0
|
|
#define HASH_RESET_LEN_HIGH_VAL 0x0
|
|
#define HASH_RESET_LEN_LOW_VAL 0x0
|
|
|
|
/* Control register bitfields */
|
|
#define HASH_CR_RESUME_MASK 0x11FCF
|
|
|
|
#define HASH_CR_SWITCHON_POS 31
|
|
#define HASH_CR_SWITCHON_MASK BIT(31)
|
|
|
|
#define HASH_CR_EMPTYMSG_POS 20
|
|
#define HASH_CR_EMPTYMSG_MASK BIT(20)
|
|
|
|
#define HASH_CR_DINF_POS 12
|
|
#define HASH_CR_DINF_MASK BIT(12)
|
|
|
|
#define HASH_CR_NBW_POS 8
|
|
#define HASH_CR_NBW_MASK 0x00000F00UL
|
|
|
|
#define HASH_CR_LKEY_POS 16
|
|
#define HASH_CR_LKEY_MASK BIT(16)
|
|
|
|
#define HASH_CR_ALGO_POS 7
|
|
#define HASH_CR_ALGO_MASK BIT(7)
|
|
|
|
#define HASH_CR_MODE_POS 6
|
|
#define HASH_CR_MODE_MASK BIT(6)
|
|
|
|
#define HASH_CR_DATAFORM_POS 4
|
|
#define HASH_CR_DATAFORM_MASK (BIT(4) | BIT(5))
|
|
|
|
#define HASH_CR_DMAE_POS 3
|
|
#define HASH_CR_DMAE_MASK BIT(3)
|
|
|
|
#define HASH_CR_INIT_POS 2
|
|
#define HASH_CR_INIT_MASK BIT(2)
|
|
|
|
#define HASH_CR_PRIVN_POS 1
|
|
#define HASH_CR_PRIVN_MASK BIT(1)
|
|
|
|
#define HASH_CR_SECN_POS 0
|
|
#define HASH_CR_SECN_MASK BIT(0)
|
|
|
|
/* Start register bitfields */
|
|
#define HASH_STR_DCAL_POS 8
|
|
#define HASH_STR_DCAL_MASK BIT(8)
|
|
#define HASH_STR_DEFAULT 0x0
|
|
|
|
#define HASH_STR_NBLW_POS 0
|
|
#define HASH_STR_NBLW_MASK 0x0000001FUL
|
|
|
|
#define HASH_NBLW_MAX_VAL 0x1F
|
|
|
|
/* PrimeCell IDs */
|
|
#define HASH_P_ID0 0xE0
|
|
#define HASH_P_ID1 0x05
|
|
#define HASH_P_ID2 0x38
|
|
#define HASH_P_ID3 0x00
|
|
#define HASH_CELL_ID0 0x0D
|
|
#define HASH_CELL_ID1 0xF0
|
|
#define HASH_CELL_ID2 0x05
|
|
#define HASH_CELL_ID3 0xB1
|
|
|
|
#define HASH_SET_BITS(reg_name, mask) \
|
|
writel_relaxed((readl_relaxed(reg_name) | mask), reg_name)
|
|
|
|
#define HASH_CLEAR_BITS(reg_name, mask) \
|
|
writel_relaxed((readl_relaxed(reg_name) & ~mask), reg_name)
|
|
|
|
#define HASH_PUT_BITS(reg, val, shift, mask) \
|
|
writel_relaxed(((readl(reg) & ~(mask)) | \
|
|
(((u32)val << shift) & (mask))), reg)
|
|
|
|
#define HASH_SET_DIN(val, len) writesl(&device_data->base->din, (val), (len))
|
|
|
|
#define HASH_INITIALIZE \
|
|
HASH_PUT_BITS( \
|
|
&device_data->base->cr, \
|
|
0x01, HASH_CR_INIT_POS, \
|
|
HASH_CR_INIT_MASK)
|
|
|
|
#define HASH_SET_DATA_FORMAT(data_format) \
|
|
HASH_PUT_BITS( \
|
|
&device_data->base->cr, \
|
|
(u32) (data_format), HASH_CR_DATAFORM_POS, \
|
|
HASH_CR_DATAFORM_MASK)
|
|
#define HASH_SET_NBLW(val) \
|
|
HASH_PUT_BITS( \
|
|
&device_data->base->str, \
|
|
(u32) (val), HASH_STR_NBLW_POS, \
|
|
HASH_STR_NBLW_MASK)
|
|
#define HASH_SET_DCAL \
|
|
HASH_PUT_BITS( \
|
|
&device_data->base->str, \
|
|
0x01, HASH_STR_DCAL_POS, \
|
|
HASH_STR_DCAL_MASK)
|
|
|
|
/* Hardware access method */
|
|
enum hash_mode {
|
|
HASH_MODE_CPU,
|
|
HASH_MODE_DMA
|
|
};
|
|
|
|
/**
|
|
* struct uint64 - Structure to handle 64 bits integers.
|
|
* @high_word: Most significant bits.
|
|
* @low_word: Least significant bits.
|
|
*
|
|
* Used to handle 64 bits integers.
|
|
*/
|
|
struct uint64 {
|
|
u32 high_word;
|
|
u32 low_word;
|
|
};
|
|
|
|
/**
|
|
* struct hash_register - Contains all registers in ux500 hash hardware.
|
|
* @cr: HASH control register (0x000).
|
|
* @din: HASH data input register (0x004).
|
|
* @str: HASH start register (0x008).
|
|
* @hx: HASH digest register 0..7 (0x00c-0x01C).
|
|
* @padding0: Reserved (0x02C).
|
|
* @itcr: Integration test control register (0x080).
|
|
* @itip: Integration test input register (0x084).
|
|
* @itop: Integration test output register (0x088).
|
|
* @padding1: Reserved (0x08C).
|
|
* @csfull: HASH context full register (0x0F8).
|
|
* @csdatain: HASH context swap data input register (0x0FC).
|
|
* @csrx: HASH context swap register 0..51 (0x100-0x1CC).
|
|
* @padding2: Reserved (0x1D0).
|
|
* @periphid0: HASH peripheral identification register 0 (0xFE0).
|
|
* @periphid1: HASH peripheral identification register 1 (0xFE4).
|
|
* @periphid2: HASH peripheral identification register 2 (0xFE8).
|
|
* @periphid3: HASH peripheral identification register 3 (0xFEC).
|
|
* @cellid0: HASH PCell identification register 0 (0xFF0).
|
|
* @cellid1: HASH PCell identification register 1 (0xFF4).
|
|
* @cellid2: HASH PCell identification register 2 (0xFF8).
|
|
* @cellid3: HASH PCell identification register 3 (0xFFC).
|
|
*
|
|
* The device communicates to the HASH via 32-bit-wide control registers
|
|
* accessible via the 32-bit width AMBA rev. 2.0 AHB Bus. Below is a structure
|
|
* with the registers used.
|
|
*/
|
|
struct hash_register {
|
|
u32 cr;
|
|
u32 din;
|
|
u32 str;
|
|
u32 hx[8];
|
|
|
|
u32 padding0[(0x080 - 0x02C) / sizeof(u32)];
|
|
|
|
u32 itcr;
|
|
u32 itip;
|
|
u32 itop;
|
|
|
|
u32 padding1[(0x0F8 - 0x08C) / sizeof(u32)];
|
|
|
|
u32 csfull;
|
|
u32 csdatain;
|
|
u32 csrx[HASH_CSR_COUNT];
|
|
|
|
u32 padding2[(0xFE0 - 0x1D0) / sizeof(u32)];
|
|
|
|
u32 periphid0;
|
|
u32 periphid1;
|
|
u32 periphid2;
|
|
u32 periphid3;
|
|
|
|
u32 cellid0;
|
|
u32 cellid1;
|
|
u32 cellid2;
|
|
u32 cellid3;
|
|
};
|
|
|
|
/**
|
|
* struct hash_state - Hash context state.
|
|
* @temp_cr: Temporary HASH Control Register.
|
|
* @str_reg: HASH Start Register.
|
|
* @din_reg: HASH Data Input Register.
|
|
* @csr[52]: HASH Context Swap Registers 0-39.
|
|
* @csfull: HASH Context Swap Registers 40 ie Status flags.
|
|
* @csdatain: HASH Context Swap Registers 41 ie Input data.
|
|
* @buffer: Working buffer for messages going to the hardware.
|
|
* @length: Length of the part of message hashed so far (floor(N/64) * 64).
|
|
* @index: Valid number of bytes in buffer (N % 64).
|
|
* @bit_index: Valid number of bits in buffer (N % 8).
|
|
*
|
|
* This structure is used between context switches, i.e. when ongoing jobs are
|
|
* interupted with new jobs. When this happens we need to store intermediate
|
|
* results in software.
|
|
*
|
|
* WARNING: "index" is the member of the structure, to be sure that "buffer"
|
|
* is aligned on a 4-bytes boundary. This is highly implementation dependent
|
|
* and MUST be checked whenever this code is ported on new platforms.
|
|
*/
|
|
struct hash_state {
|
|
u32 temp_cr;
|
|
u32 str_reg;
|
|
u32 din_reg;
|
|
u32 csr[52];
|
|
u32 csfull;
|
|
u32 csdatain;
|
|
u32 buffer[HASH_BLOCK_SIZE / sizeof(u32)];
|
|
struct uint64 length;
|
|
u8 index;
|
|
u8 bit_index;
|
|
};
|
|
|
|
/**
|
|
* enum hash_device_id - HASH device ID.
|
|
* @HASH_DEVICE_ID_0: Hash hardware with ID 0
|
|
* @HASH_DEVICE_ID_1: Hash hardware with ID 1
|
|
*/
|
|
enum hash_device_id {
|
|
HASH_DEVICE_ID_0 = 0,
|
|
HASH_DEVICE_ID_1 = 1
|
|
};
|
|
|
|
/**
|
|
* enum hash_data_format - HASH data format.
|
|
* @HASH_DATA_32_BITS: 32 bits data format
|
|
* @HASH_DATA_16_BITS: 16 bits data format
|
|
* @HASH_DATA_8_BITS: 8 bits data format.
|
|
* @HASH_DATA_1_BITS: 1 bit data format.
|
|
*/
|
|
enum hash_data_format {
|
|
HASH_DATA_32_BITS = 0x0,
|
|
HASH_DATA_16_BITS = 0x1,
|
|
HASH_DATA_8_BITS = 0x2,
|
|
HASH_DATA_1_BIT = 0x3
|
|
};
|
|
|
|
/**
|
|
* enum hash_algo - Enumeration for selecting between SHA1 or SHA2 algorithm.
|
|
* @HASH_ALGO_SHA1: Indicates that SHA1 is used.
|
|
* @HASH_ALGO_SHA2: Indicates that SHA2 (SHA256) is used.
|
|
*/
|
|
enum hash_algo {
|
|
HASH_ALGO_SHA1 = 0x0,
|
|
HASH_ALGO_SHA256 = 0x1
|
|
};
|
|
|
|
/**
|
|
* enum hash_op - Enumeration for selecting between HASH or HMAC mode.
|
|
* @HASH_OPER_MODE_HASH: Indicates usage of normal HASH mode.
|
|
* @HASH_OPER_MODE_HMAC: Indicates usage of HMAC.
|
|
*/
|
|
enum hash_op {
|
|
HASH_OPER_MODE_HASH = 0x0,
|
|
HASH_OPER_MODE_HMAC = 0x1
|
|
};
|
|
|
|
/**
|
|
* struct hash_config - Configuration data for the hardware.
|
|
* @data_format: Format of data entered into the hash data in register.
|
|
* @algorithm: Algorithm selection bit.
|
|
* @oper_mode: Operating mode selection bit.
|
|
*/
|
|
struct hash_config {
|
|
int data_format;
|
|
int algorithm;
|
|
int oper_mode;
|
|
};
|
|
|
|
/**
|
|
* struct hash_dma - Structure used for dma.
|
|
* @mask: DMA capabilities bitmap mask.
|
|
* @complete: Used to maintain state for a "completion".
|
|
* @chan_mem2hash: DMA channel.
|
|
* @cfg_mem2hash: DMA channel configuration.
|
|
* @sg_len: Scatterlist length.
|
|
* @sg: Scatterlist.
|
|
* @nents: Number of sg entries.
|
|
*/
|
|
struct hash_dma {
|
|
dma_cap_mask_t mask;
|
|
struct completion complete;
|
|
struct dma_chan *chan_mem2hash;
|
|
void *cfg_mem2hash;
|
|
int sg_len;
|
|
struct scatterlist *sg;
|
|
int nents;
|
|
};
|
|
|
|
/**
|
|
* struct hash_ctx - The context used for hash calculations.
|
|
* @key: The key used in the operation.
|
|
* @keylen: The length of the key.
|
|
* @state: The state of the current calculations.
|
|
* @config: The current configuration.
|
|
* @digestsize: The size of current digest.
|
|
* @device: Pointer to the device structure.
|
|
*/
|
|
struct hash_ctx {
|
|
u8 *key;
|
|
u32 keylen;
|
|
struct hash_config config;
|
|
int digestsize;
|
|
struct hash_device_data *device;
|
|
};
|
|
|
|
/**
|
|
* struct hash_ctx - The request context used for hash calculations.
|
|
* @state: The state of the current calculations.
|
|
* @dma_mode: Used in special cases (workaround), e.g. need to change to
|
|
* cpu mode, if not supported/working in dma mode.
|
|
* @updated: Indicates if hardware is initialized for new operations.
|
|
*/
|
|
struct hash_req_ctx {
|
|
struct hash_state state;
|
|
bool dma_mode;
|
|
u8 updated;
|
|
};
|
|
|
|
/**
|
|
* struct hash_device_data - structure for a hash device.
|
|
* @base: Pointer to the hardware base address.
|
|
* @list_node: For inclusion in klist.
|
|
* @dev: Pointer to the device dev structure.
|
|
* @ctx_lock: Spinlock for current_ctx.
|
|
* @current_ctx: Pointer to the currently allocated context.
|
|
* @power_state: TRUE = power state on, FALSE = power state off.
|
|
* @power_state_lock: Spinlock for power_state.
|
|
* @regulator: Pointer to the device's power control.
|
|
* @clk: Pointer to the device's clock control.
|
|
* @restore_dev_state: TRUE = saved state, FALSE = no saved state.
|
|
* @dma: Structure used for dma.
|
|
*/
|
|
struct hash_device_data {
|
|
struct hash_register __iomem *base;
|
|
struct klist_node list_node;
|
|
struct device *dev;
|
|
struct spinlock ctx_lock;
|
|
struct hash_ctx *current_ctx;
|
|
bool power_state;
|
|
struct spinlock power_state_lock;
|
|
struct regulator *regulator;
|
|
struct clk *clk;
|
|
bool restore_dev_state;
|
|
struct hash_state state; /* Used for saving and resuming state */
|
|
struct hash_dma dma;
|
|
};
|
|
|
|
int hash_check_hw(struct hash_device_data *device_data);
|
|
|
|
int hash_setconfiguration(struct hash_device_data *device_data,
|
|
struct hash_config *config);
|
|
|
|
void hash_begin(struct hash_device_data *device_data, struct hash_ctx *ctx);
|
|
|
|
void hash_get_digest(struct hash_device_data *device_data,
|
|
u8 *digest, int algorithm);
|
|
|
|
int hash_hw_update(struct ahash_request *req);
|
|
|
|
int hash_save_state(struct hash_device_data *device_data,
|
|
struct hash_state *state);
|
|
|
|
int hash_resume_state(struct hash_device_data *device_data,
|
|
const struct hash_state *state);
|
|
|
|
#endif
|