395 lines
10 KiB
C
395 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (c) 2022 Amlogic, Inc. All rights reserved.
|
|
*/
|
|
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/perf_event.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/printk.h>
|
|
#include <linux/types.h>
|
|
|
|
#include <soc/amlogic/meson_ddr_pmu.h>
|
|
|
|
#define PORT_MAJOR 32
|
|
#define DEFAULT_XTAL_FREQ 24000000UL
|
|
|
|
#define DMC_QOS_IRQ BIT(30)
|
|
|
|
/* DMC bandwidth monitor register address offset */
|
|
#define DMC_MON_G12_CTRL0 (0x0 << 2)
|
|
#define DMC_MON_G12_CTRL1 (0x1 << 2)
|
|
#define DMC_MON_G12_CTRL2 (0x2 << 2)
|
|
#define DMC_MON_G12_CTRL3 (0x3 << 2)
|
|
#define DMC_MON_G12_CTRL4 (0x4 << 2)
|
|
#define DMC_MON_G12_CTRL5 (0x5 << 2)
|
|
#define DMC_MON_G12_CTRL6 (0x6 << 2)
|
|
#define DMC_MON_G12_CTRL7 (0x7 << 2)
|
|
#define DMC_MON_G12_CTRL8 (0x8 << 2)
|
|
|
|
#define DMC_MON_G12_ALL_REQ_CNT (0x9 << 2)
|
|
#define DMC_MON_G12_ALL_GRANT_CNT (0xa << 2)
|
|
#define DMC_MON_G12_ONE_GRANT_CNT (0xb << 2)
|
|
#define DMC_MON_G12_SEC_GRANT_CNT (0xc << 2)
|
|
#define DMC_MON_G12_THD_GRANT_CNT (0xd << 2)
|
|
#define DMC_MON_G12_FOR_GRANT_CNT (0xe << 2)
|
|
#define DMC_MON_G12_TIMER (0xf << 2)
|
|
|
|
/* Each bit represent a axi line */
|
|
PMU_FORMAT_ATTR(event, "config:0-7");
|
|
PMU_FORMAT_ATTR(arm, "config1:0");
|
|
PMU_FORMAT_ATTR(gpu, "config1:1");
|
|
PMU_FORMAT_ATTR(pcie, "config1:2");
|
|
PMU_FORMAT_ATTR(hdcp, "config1:3");
|
|
PMU_FORMAT_ATTR(hevc_front, "config1:4");
|
|
PMU_FORMAT_ATTR(usb3_0, "config1:6");
|
|
PMU_FORMAT_ATTR(device, "config1:7");
|
|
PMU_FORMAT_ATTR(hevc_back, "config1:8");
|
|
PMU_FORMAT_ATTR(h265enc, "config1:9");
|
|
PMU_FORMAT_ATTR(vpu_read1, "config1:16");
|
|
PMU_FORMAT_ATTR(vpu_read2, "config1:17");
|
|
PMU_FORMAT_ATTR(vpu_read3, "config1:18");
|
|
PMU_FORMAT_ATTR(vpu_write1, "config1:19");
|
|
PMU_FORMAT_ATTR(vpu_write2, "config1:20");
|
|
PMU_FORMAT_ATTR(vdec, "config1:21");
|
|
PMU_FORMAT_ATTR(hcodec, "config1:22");
|
|
PMU_FORMAT_ATTR(ge2d, "config1:23");
|
|
|
|
PMU_FORMAT_ATTR(spicc1, "config1:32");
|
|
PMU_FORMAT_ATTR(usb0, "config1:33");
|
|
PMU_FORMAT_ATTR(dma, "config1:34");
|
|
PMU_FORMAT_ATTR(arb0, "config1:35");
|
|
PMU_FORMAT_ATTR(sd_emmc_b, "config1:36");
|
|
PMU_FORMAT_ATTR(usb1, "config1:37");
|
|
PMU_FORMAT_ATTR(audio, "config1:38");
|
|
PMU_FORMAT_ATTR(aififo, "config1:39");
|
|
PMU_FORMAT_ATTR(parser, "config1:41");
|
|
PMU_FORMAT_ATTR(ao_cpu, "config1:42");
|
|
PMU_FORMAT_ATTR(sd_emmc_c, "config1:43");
|
|
PMU_FORMAT_ATTR(spicc2, "config1:44");
|
|
PMU_FORMAT_ATTR(ethernet, "config1:45");
|
|
PMU_FORMAT_ATTR(sana, "config1:46");
|
|
|
|
/* for sm1 and g12b */
|
|
PMU_FORMAT_ATTR(nna, "config1:10");
|
|
|
|
/* for g12b only */
|
|
PMU_FORMAT_ATTR(gdc, "config1:11");
|
|
PMU_FORMAT_ATTR(mipi_isp, "config1:12");
|
|
PMU_FORMAT_ATTR(arm1, "config1:13");
|
|
PMU_FORMAT_ATTR(sd_emmc_a, "config1:40");
|
|
|
|
static struct attribute *g12_pmu_format_attrs[] = {
|
|
&format_attr_event.attr,
|
|
&format_attr_arm.attr,
|
|
&format_attr_gpu.attr,
|
|
&format_attr_nna.attr,
|
|
&format_attr_gdc.attr,
|
|
&format_attr_arm1.attr,
|
|
&format_attr_mipi_isp.attr,
|
|
&format_attr_sd_emmc_a.attr,
|
|
&format_attr_pcie.attr,
|
|
&format_attr_hdcp.attr,
|
|
&format_attr_hevc_front.attr,
|
|
&format_attr_usb3_0.attr,
|
|
&format_attr_device.attr,
|
|
&format_attr_hevc_back.attr,
|
|
&format_attr_h265enc.attr,
|
|
&format_attr_vpu_read1.attr,
|
|
&format_attr_vpu_read2.attr,
|
|
&format_attr_vpu_read3.attr,
|
|
&format_attr_vpu_write1.attr,
|
|
&format_attr_vpu_write2.attr,
|
|
&format_attr_vdec.attr,
|
|
&format_attr_hcodec.attr,
|
|
&format_attr_ge2d.attr,
|
|
&format_attr_spicc1.attr,
|
|
&format_attr_usb0.attr,
|
|
&format_attr_dma.attr,
|
|
&format_attr_arb0.attr,
|
|
&format_attr_sd_emmc_b.attr,
|
|
&format_attr_usb1.attr,
|
|
&format_attr_audio.attr,
|
|
&format_attr_aififo.attr,
|
|
&format_attr_parser.attr,
|
|
&format_attr_ao_cpu.attr,
|
|
&format_attr_sd_emmc_c.attr,
|
|
&format_attr_spicc2.attr,
|
|
&format_attr_ethernet.attr,
|
|
&format_attr_sana.attr,
|
|
NULL,
|
|
};
|
|
|
|
/* calculate ddr clock */
|
|
static unsigned long dmc_g12_get_freq_quick(struct dmc_info *info)
|
|
{
|
|
unsigned int val;
|
|
unsigned int n, m, od1;
|
|
unsigned int od_div = 0xfff;
|
|
unsigned long freq = 0;
|
|
|
|
val = readl(info->pll_reg);
|
|
val = val & 0xfffff;
|
|
switch ((val >> 16) & 7) {
|
|
case 0:
|
|
od_div = 2;
|
|
break;
|
|
|
|
case 1:
|
|
od_div = 3;
|
|
break;
|
|
|
|
case 2:
|
|
od_div = 4;
|
|
break;
|
|
|
|
case 3:
|
|
od_div = 6;
|
|
break;
|
|
|
|
case 4:
|
|
od_div = 8;
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
|
|
m = val & 0x1ff;
|
|
n = ((val >> 10) & 0x1f);
|
|
od1 = (((val >> 19) & 0x1)) == 1 ? 2 : 1;
|
|
freq = DEFAULT_XTAL_FREQ / 1000; /* avoid overflow */
|
|
if (n)
|
|
freq = ((((freq * m) / n) >> od1) / od_div) * 1000;
|
|
|
|
return freq;
|
|
}
|
|
|
|
#ifdef DEBUG
|
|
static void g12_dump_reg(struct dmc_info *db)
|
|
{
|
|
int s = 0, i;
|
|
unsigned int r;
|
|
|
|
for (i = 0; i < 9; i++) {
|
|
r = readl(db->ddr_reg[0] + (DMC_MON_G12_CTRL0 + (i << 2)));
|
|
pr_notice("DMC_MON_CTRL%d: %08x\n", i, r);
|
|
}
|
|
r = readl(db->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT);
|
|
pr_notice("DMC_MON_ALL_REQ_CNT: %08x\n", r);
|
|
r = readl(db->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT);
|
|
pr_notice("DMC_MON_ALL_GRANT_CNT:%08x\n", r);
|
|
r = readl(db->ddr_reg[0] + DMC_MON_G12_ONE_GRANT_CNT);
|
|
pr_notice("DMC_MON_ONE_GRANT_CNT:%08x\n", r);
|
|
r = readl(db->ddr_reg[0] + DMC_MON_G12_SEC_GRANT_CNT);
|
|
pr_notice("DMC_MON_SEC_GRANT_CNT:%08x\n", r);
|
|
r = readl(db->ddr_reg[0] + DMC_MON_G12_THD_GRANT_CNT);
|
|
pr_notice("DMC_MON_THD_GRANT_CNT:%08x\n", r);
|
|
r = readl(db->ddr_reg[0] + DMC_MON_G12_FOR_GRANT_CNT);
|
|
pr_notice("DMC_MON_FOR_GRANT_CNT:%08x\n", r);
|
|
r = readl(db->ddr_reg[0] + DMC_MON_G12_TIMER);
|
|
pr_notice("DMC_MON_TIMER: %08x\n", r);
|
|
}
|
|
#endif
|
|
|
|
static void dmc_g12_counter_enable(struct dmc_info *info)
|
|
{
|
|
unsigned int val;
|
|
unsigned long clock_count = dmc_g12_get_freq_quick(info) / 10; /* 100ms */
|
|
|
|
writel(clock_count, info->ddr_reg[0] + DMC_MON_G12_TIMER);
|
|
|
|
val = readl(info->ddr_reg[0] + DMC_MON_G12_CTRL0);
|
|
|
|
/* enable all channel */
|
|
val = BIT(31) | /* enable bit */
|
|
BIT(20) | /* use timer */
|
|
0x0f; /* 4 channels */
|
|
|
|
writel(val, info->ddr_reg[0] + DMC_MON_G12_CTRL0);
|
|
|
|
#ifdef DEBUG
|
|
g12_dump_reg(info);
|
|
#endif
|
|
}
|
|
|
|
static void dmc_g12_config_fiter(struct dmc_info *info,
|
|
int port, int channel)
|
|
{
|
|
u32 val;
|
|
u32 rp[MAX_CHANNEL_NUM] = {DMC_MON_G12_CTRL1, DMC_MON_G12_CTRL3,
|
|
DMC_MON_G12_CTRL5, DMC_MON_G12_CTRL7};
|
|
u32 rs[MAX_CHANNEL_NUM] = {DMC_MON_G12_CTRL2, DMC_MON_G12_CTRL4,
|
|
DMC_MON_G12_CTRL6, DMC_MON_G12_CTRL8};
|
|
int subport = -1;
|
|
|
|
/* clear all port mask */
|
|
if (port < 0) {
|
|
writel(0, info->ddr_reg[0] + rp[channel]);
|
|
writel(0, info->ddr_reg[0] + rs[channel]);
|
|
return;
|
|
}
|
|
|
|
if (port >= PORT_MAJOR)
|
|
subport = port - PORT_MAJOR;
|
|
|
|
if (subport < 0) {
|
|
val = readl(info->ddr_reg[0] + rp[channel]);
|
|
val |= (1 << port);
|
|
writel(val, info->ddr_reg[0] + rp[channel]);
|
|
val = 0xffff;
|
|
writel(val, info->ddr_reg[0] + rs[channel]);
|
|
} else {
|
|
val = BIT(23); /* select device */
|
|
writel(val, info->ddr_reg[0] + rp[channel]);
|
|
val = readl(info->ddr_reg[0] + rs[channel]);
|
|
val |= (1 << subport);
|
|
writel(val, info->ddr_reg[0] + rs[channel]);
|
|
}
|
|
}
|
|
|
|
static void dmc_g12_set_axi_filter(struct dmc_info *info, int axi_id, int channel)
|
|
{
|
|
if (channel > info->hw_info->chann_nr)
|
|
return;
|
|
|
|
dmc_g12_config_fiter(info, axi_id, channel);
|
|
}
|
|
|
|
static void dmc_g12_counter_disable(struct dmc_info *info)
|
|
{
|
|
int i;
|
|
|
|
/* clear timer */
|
|
writel(0, info->ddr_reg[0] + DMC_MON_G12_CTRL0);
|
|
writel(0, info->ddr_reg[0] + DMC_MON_G12_TIMER);
|
|
|
|
writel(0, info->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT);
|
|
writel(0, info->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT);
|
|
writel(0, info->ddr_reg[0] + DMC_MON_G12_ONE_GRANT_CNT);
|
|
writel(0, info->ddr_reg[0] + DMC_MON_G12_SEC_GRANT_CNT);
|
|
writel(0, info->ddr_reg[0] + DMC_MON_G12_THD_GRANT_CNT);
|
|
writel(0, info->ddr_reg[0] + DMC_MON_G12_FOR_GRANT_CNT);
|
|
|
|
/* clear port channel mapping */
|
|
for (i = 0; i < info->hw_info->chann_nr; i++)
|
|
dmc_g12_config_fiter(info, -1, i);
|
|
}
|
|
|
|
static void dmc_g12_get_counters(struct dmc_info *info,
|
|
struct dmc_counter *counter)
|
|
{
|
|
int i;
|
|
unsigned int reg;
|
|
|
|
counter->all_cnt = readl(info->ddr_reg[0] + DMC_MON_G12_ALL_GRANT_CNT);
|
|
counter->all_req = readl(info->ddr_reg[0] + DMC_MON_G12_ALL_REQ_CNT);
|
|
|
|
for (i = 0; i < info->hw_info->chann_nr; i++) {
|
|
reg = DMC_MON_G12_ONE_GRANT_CNT + (i << 2);
|
|
counter->channel_cnt[i] = readl(info->ddr_reg[0] + reg);
|
|
}
|
|
}
|
|
|
|
static int dmc_g12_irq_handler(struct dmc_info *info,
|
|
struct dmc_counter *counter)
|
|
{
|
|
unsigned int val;
|
|
int ret = -EINVAL;
|
|
|
|
val = readl(info->ddr_reg[0] + DMC_MON_G12_CTRL0);
|
|
if (val & DMC_QOS_IRQ) {
|
|
dmc_g12_get_counters(info, counter);
|
|
/* clear irq flags */
|
|
writel(val, info->ddr_reg[0] + DMC_MON_G12_CTRL0);
|
|
ret = 0;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static const struct dmc_hw_info g12a_dmc_info = {
|
|
.enable = dmc_g12_counter_enable,
|
|
.disable = dmc_g12_counter_disable,
|
|
.irq_handler = dmc_g12_irq_handler,
|
|
.get_counters = dmc_g12_get_counters,
|
|
.set_axi_filter = dmc_g12_set_axi_filter,
|
|
|
|
.dmc_nr = 1,
|
|
.chann_nr = 4,
|
|
.capability = {0X7EFF00FF03DF, 0},
|
|
.fmt_attr = g12_pmu_format_attrs,
|
|
};
|
|
|
|
static const struct dmc_hw_info g12b_dmc_info = {
|
|
.enable = dmc_g12_counter_enable,
|
|
.disable = dmc_g12_counter_disable,
|
|
.irq_handler = dmc_g12_irq_handler,
|
|
.get_counters = dmc_g12_get_counters,
|
|
.set_axi_filter = dmc_g12_set_axi_filter,
|
|
|
|
.dmc_nr = 1,
|
|
.chann_nr = 4,
|
|
.capability = {0X7FFF00FF3FDF, 0},
|
|
.fmt_attr = g12_pmu_format_attrs,
|
|
};
|
|
|
|
static const struct dmc_hw_info sm1_dmc_info = {
|
|
.enable = dmc_g12_counter_enable,
|
|
.disable = dmc_g12_counter_disable,
|
|
.irq_handler = dmc_g12_irq_handler,
|
|
.get_counters = dmc_g12_get_counters,
|
|
.set_axi_filter = dmc_g12_set_axi_filter,
|
|
|
|
.dmc_nr = 1,
|
|
.chann_nr = 4,
|
|
.capability = {0X7EFF00FF07DF, 0},
|
|
.fmt_attr = g12_pmu_format_attrs,
|
|
};
|
|
|
|
static int g12_ddr_pmu_probe(struct platform_device *pdev)
|
|
{
|
|
return meson_ddr_pmu_create(pdev);
|
|
}
|
|
|
|
static int g12_ddr_pmu_remove(struct platform_device *pdev)
|
|
{
|
|
meson_ddr_pmu_remove(pdev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id meson_ddr_pmu_dt_match[] = {
|
|
{
|
|
.compatible = "amlogic,g12a-ddr-pmu",
|
|
.data = &g12a_dmc_info,
|
|
},
|
|
{
|
|
.compatible = "amlogic,g12b-ddr-pmu",
|
|
.data = &g12b_dmc_info,
|
|
},
|
|
{
|
|
.compatible = "amlogic,sm1-ddr-pmu",
|
|
.data = &sm1_dmc_info,
|
|
},
|
|
{}
|
|
};
|
|
|
|
static struct platform_driver g12_ddr_pmu_driver = {
|
|
.probe = g12_ddr_pmu_probe,
|
|
.remove = g12_ddr_pmu_remove,
|
|
|
|
.driver = {
|
|
.name = "meson-g12-ddr-pmu",
|
|
.of_match_table = meson_ddr_pmu_dt_match,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(g12_ddr_pmu_driver);
|
|
MODULE_AUTHOR("Jiucheng Xu");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Amlogic G12 series SoC DDR PMU");
|