2789 lines
84 KiB
C
2789 lines
84 KiB
C
/*
|
|
* drivers/video/aty/radeon_pm.c
|
|
*
|
|
* Copyright 2003,2004 Ben. Herrenschmidt <benh@kernel.crashing.org>
|
|
* Copyright 2004 Paul Mackerras <paulus@samba.org>
|
|
*
|
|
* This is the power management code for ATI radeon chipsets. It contains
|
|
* some dynamic clock PM enable/disable code similar to what X.org does,
|
|
* some D2-state (APM-style) sleep/wakeup code for use on some PowerMacs,
|
|
* and the necessary bits to re-initialize from scratch a few chips found
|
|
* on PowerMacs as well. The later could be extended to more platforms
|
|
* provided the memory controller configuration code be made more generic,
|
|
* and you can get the proper mode register commands for your RAMs.
|
|
* Those things may be found in the BIOS image...
|
|
*/
|
|
|
|
#include "radeonfb.h"
|
|
|
|
#include <linux/console.h>
|
|
#include <linux/agp_backend.h>
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
#include <asm/processor.h>
|
|
#include <asm/prom.h>
|
|
#include <asm/pmac_feature.h>
|
|
#endif
|
|
|
|
#include "ati_ids.h"
|
|
|
|
static void radeon_pm_disable_dynamic_mode(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* RV100 */
|
|
if ((rinfo->family == CHIP_FAMILY_RV100) && (!rinfo->is_mobility)) {
|
|
if (rinfo->has_CRTC2) {
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
tmp &= ~SCLK_CNTL__DYN_STOP_LAT_MASK;
|
|
tmp |= SCLK_CNTL__CP_MAX_DYN_STOP_LAT | SCLK_CNTL__FORCEON_MASK;
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
}
|
|
tmp = INPLL(pllMCLK_CNTL);
|
|
tmp |= (MCLK_CNTL__FORCE_MCLKA |
|
|
MCLK_CNTL__FORCE_MCLKB |
|
|
MCLK_CNTL__FORCE_YCLKA |
|
|
MCLK_CNTL__FORCE_YCLKB |
|
|
MCLK_CNTL__FORCE_AIC |
|
|
MCLK_CNTL__FORCE_MC);
|
|
OUTPLL(pllMCLK_CNTL, tmp);
|
|
return;
|
|
}
|
|
/* R100 */
|
|
if (!rinfo->has_CRTC2) {
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
tmp |= (SCLK_CNTL__FORCE_CP | SCLK_CNTL__FORCE_HDP |
|
|
SCLK_CNTL__FORCE_DISP1 | SCLK_CNTL__FORCE_TOP |
|
|
SCLK_CNTL__FORCE_E2 | SCLK_CNTL__FORCE_SE |
|
|
SCLK_CNTL__FORCE_IDCT | SCLK_CNTL__FORCE_VIP |
|
|
SCLK_CNTL__FORCE_RE | SCLK_CNTL__FORCE_PB |
|
|
SCLK_CNTL__FORCE_TAM | SCLK_CNTL__FORCE_TDM |
|
|
SCLK_CNTL__FORCE_RB);
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
return;
|
|
}
|
|
/* RV350 (M10) */
|
|
if (rinfo->family == CHIP_FAMILY_RV350) {
|
|
/* for RV350/M10, no delays are required. */
|
|
tmp = INPLL(pllSCLK_CNTL2);
|
|
tmp |= (SCLK_CNTL2__R300_FORCE_TCL |
|
|
SCLK_CNTL2__R300_FORCE_GA |
|
|
SCLK_CNTL2__R300_FORCE_CBA);
|
|
OUTPLL(pllSCLK_CNTL2, tmp);
|
|
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
tmp |= (SCLK_CNTL__FORCE_DISP2 | SCLK_CNTL__FORCE_CP |
|
|
SCLK_CNTL__FORCE_HDP | SCLK_CNTL__FORCE_DISP1 |
|
|
SCLK_CNTL__FORCE_TOP | SCLK_CNTL__FORCE_E2 |
|
|
SCLK_CNTL__R300_FORCE_VAP | SCLK_CNTL__FORCE_IDCT |
|
|
SCLK_CNTL__FORCE_VIP | SCLK_CNTL__R300_FORCE_SR |
|
|
SCLK_CNTL__R300_FORCE_PX | SCLK_CNTL__R300_FORCE_TX |
|
|
SCLK_CNTL__R300_FORCE_US | SCLK_CNTL__FORCE_TV_SCLK |
|
|
SCLK_CNTL__R300_FORCE_SU | SCLK_CNTL__FORCE_OV0);
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
|
|
tmp = INPLL(pllSCLK_MORE_CNTL);
|
|
tmp |= (SCLK_MORE_CNTL__FORCE_DISPREGS | SCLK_MORE_CNTL__FORCE_MC_GUI |
|
|
SCLK_MORE_CNTL__FORCE_MC_HOST);
|
|
OUTPLL(pllSCLK_MORE_CNTL, tmp);
|
|
|
|
tmp = INPLL(pllMCLK_CNTL);
|
|
tmp |= (MCLK_CNTL__FORCE_MCLKA |
|
|
MCLK_CNTL__FORCE_MCLKB |
|
|
MCLK_CNTL__FORCE_YCLKA |
|
|
MCLK_CNTL__FORCE_YCLKB |
|
|
MCLK_CNTL__FORCE_MC);
|
|
OUTPLL(pllMCLK_CNTL, tmp);
|
|
|
|
tmp = INPLL(pllVCLK_ECP_CNTL);
|
|
tmp &= ~(VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb |
|
|
VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb |
|
|
VCLK_ECP_CNTL__R300_DISP_DAC_PIXCLK_DAC_BLANK_OFF);
|
|
OUTPLL(pllVCLK_ECP_CNTL, tmp);
|
|
|
|
tmp = INPLL(pllPIXCLKS_CNTL);
|
|
tmp &= ~(PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_DVOCLK_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_PIXCLK_DVO_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_DISP_DAC_PIXCLK_DAC2_BLANK_OFF);
|
|
OUTPLL(pllPIXCLKS_CNTL, tmp);
|
|
|
|
return;
|
|
}
|
|
|
|
/* Default */
|
|
|
|
/* Force Core Clocks */
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
tmp |= (SCLK_CNTL__FORCE_CP | SCLK_CNTL__FORCE_E2);
|
|
|
|
/* XFree doesn't do that case, but we had this code from Apple and it
|
|
* seem necessary for proper suspend/resume operations
|
|
*/
|
|
if (rinfo->is_mobility) {
|
|
tmp |= SCLK_CNTL__FORCE_HDP|
|
|
SCLK_CNTL__FORCE_DISP1|
|
|
SCLK_CNTL__FORCE_DISP2|
|
|
SCLK_CNTL__FORCE_TOP|
|
|
SCLK_CNTL__FORCE_SE|
|
|
SCLK_CNTL__FORCE_IDCT|
|
|
SCLK_CNTL__FORCE_VIP|
|
|
SCLK_CNTL__FORCE_PB|
|
|
SCLK_CNTL__FORCE_RE|
|
|
SCLK_CNTL__FORCE_TAM|
|
|
SCLK_CNTL__FORCE_TDM|
|
|
SCLK_CNTL__FORCE_RB|
|
|
SCLK_CNTL__FORCE_TV_SCLK|
|
|
SCLK_CNTL__FORCE_SUBPIC|
|
|
SCLK_CNTL__FORCE_OV0;
|
|
}
|
|
else if (rinfo->family == CHIP_FAMILY_R300 ||
|
|
rinfo->family == CHIP_FAMILY_R350) {
|
|
tmp |= SCLK_CNTL__FORCE_HDP |
|
|
SCLK_CNTL__FORCE_DISP1 |
|
|
SCLK_CNTL__FORCE_DISP2 |
|
|
SCLK_CNTL__FORCE_TOP |
|
|
SCLK_CNTL__FORCE_IDCT |
|
|
SCLK_CNTL__FORCE_VIP;
|
|
}
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
radeon_msleep(16);
|
|
|
|
if (rinfo->family == CHIP_FAMILY_R300 || rinfo->family == CHIP_FAMILY_R350) {
|
|
tmp = INPLL(pllSCLK_CNTL2);
|
|
tmp |= SCLK_CNTL2__R300_FORCE_TCL |
|
|
SCLK_CNTL2__R300_FORCE_GA |
|
|
SCLK_CNTL2__R300_FORCE_CBA;
|
|
OUTPLL(pllSCLK_CNTL2, tmp);
|
|
radeon_msleep(16);
|
|
}
|
|
|
|
tmp = INPLL(pllCLK_PIN_CNTL);
|
|
tmp &= ~CLK_PIN_CNTL__SCLK_DYN_START_CNTL;
|
|
OUTPLL(pllCLK_PIN_CNTL, tmp);
|
|
radeon_msleep(15);
|
|
|
|
if (rinfo->is_IGP) {
|
|
/* Weird ... X is _un_ forcing clocks here, I think it's
|
|
* doing backward. Imitate it for now...
|
|
*/
|
|
tmp = INPLL(pllMCLK_CNTL);
|
|
tmp &= ~(MCLK_CNTL__FORCE_MCLKA |
|
|
MCLK_CNTL__FORCE_YCLKA);
|
|
OUTPLL(pllMCLK_CNTL, tmp);
|
|
radeon_msleep(16);
|
|
}
|
|
/* Hrm... same shit, X doesn't do that but I have to */
|
|
else if (rinfo->is_mobility) {
|
|
tmp = INPLL(pllMCLK_CNTL);
|
|
tmp |= (MCLK_CNTL__FORCE_MCLKA |
|
|
MCLK_CNTL__FORCE_MCLKB |
|
|
MCLK_CNTL__FORCE_YCLKA |
|
|
MCLK_CNTL__FORCE_YCLKB);
|
|
OUTPLL(pllMCLK_CNTL, tmp);
|
|
radeon_msleep(16);
|
|
|
|
tmp = INPLL(pllMCLK_MISC);
|
|
tmp &= ~(MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT|
|
|
MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT|
|
|
MCLK_MISC__MC_MCLK_DYN_ENABLE|
|
|
MCLK_MISC__IO_MCLK_DYN_ENABLE);
|
|
OUTPLL(pllMCLK_MISC, tmp);
|
|
radeon_msleep(15);
|
|
}
|
|
|
|
if (rinfo->is_mobility) {
|
|
tmp = INPLL(pllSCLK_MORE_CNTL);
|
|
tmp |= SCLK_MORE_CNTL__FORCE_DISPREGS|
|
|
SCLK_MORE_CNTL__FORCE_MC_GUI|
|
|
SCLK_MORE_CNTL__FORCE_MC_HOST;
|
|
OUTPLL(pllSCLK_MORE_CNTL, tmp);
|
|
radeon_msleep(16);
|
|
}
|
|
|
|
tmp = INPLL(pllPIXCLKS_CNTL);
|
|
tmp &= ~(PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb);
|
|
OUTPLL(pllPIXCLKS_CNTL, tmp);
|
|
radeon_msleep(16);
|
|
|
|
tmp = INPLL( pllVCLK_ECP_CNTL);
|
|
tmp &= ~(VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb |
|
|
VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb);
|
|
OUTPLL( pllVCLK_ECP_CNTL, tmp);
|
|
radeon_msleep(16);
|
|
}
|
|
|
|
static void radeon_pm_enable_dynamic_mode(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* R100 */
|
|
if (!rinfo->has_CRTC2) {
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
|
|
if ((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) > CFG_ATI_REV_A13)
|
|
tmp &= ~(SCLK_CNTL__FORCE_CP | SCLK_CNTL__FORCE_RB);
|
|
tmp &= ~(SCLK_CNTL__FORCE_HDP | SCLK_CNTL__FORCE_DISP1 |
|
|
SCLK_CNTL__FORCE_TOP | SCLK_CNTL__FORCE_SE |
|
|
SCLK_CNTL__FORCE_IDCT | SCLK_CNTL__FORCE_RE |
|
|
SCLK_CNTL__FORCE_PB | SCLK_CNTL__FORCE_TAM |
|
|
SCLK_CNTL__FORCE_TDM);
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
return;
|
|
}
|
|
|
|
/* M10 */
|
|
if (rinfo->family == CHIP_FAMILY_RV350) {
|
|
tmp = INPLL(pllSCLK_CNTL2);
|
|
tmp &= ~(SCLK_CNTL2__R300_FORCE_TCL |
|
|
SCLK_CNTL2__R300_FORCE_GA |
|
|
SCLK_CNTL2__R300_FORCE_CBA);
|
|
tmp |= (SCLK_CNTL2__R300_TCL_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL2__R300_GA_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL2__R300_CBA_MAX_DYN_STOP_LAT);
|
|
OUTPLL(pllSCLK_CNTL2, tmp);
|
|
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
tmp &= ~(SCLK_CNTL__FORCE_DISP2 | SCLK_CNTL__FORCE_CP |
|
|
SCLK_CNTL__FORCE_HDP | SCLK_CNTL__FORCE_DISP1 |
|
|
SCLK_CNTL__FORCE_TOP | SCLK_CNTL__FORCE_E2 |
|
|
SCLK_CNTL__R300_FORCE_VAP | SCLK_CNTL__FORCE_IDCT |
|
|
SCLK_CNTL__FORCE_VIP | SCLK_CNTL__R300_FORCE_SR |
|
|
SCLK_CNTL__R300_FORCE_PX | SCLK_CNTL__R300_FORCE_TX |
|
|
SCLK_CNTL__R300_FORCE_US | SCLK_CNTL__FORCE_TV_SCLK |
|
|
SCLK_CNTL__R300_FORCE_SU | SCLK_CNTL__FORCE_OV0);
|
|
tmp |= SCLK_CNTL__DYN_STOP_LAT_MASK;
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
|
|
tmp = INPLL(pllSCLK_MORE_CNTL);
|
|
tmp &= ~SCLK_MORE_CNTL__FORCEON;
|
|
tmp |= SCLK_MORE_CNTL__DISPREGS_MAX_DYN_STOP_LAT |
|
|
SCLK_MORE_CNTL__MC_GUI_MAX_DYN_STOP_LAT |
|
|
SCLK_MORE_CNTL__MC_HOST_MAX_DYN_STOP_LAT;
|
|
OUTPLL(pllSCLK_MORE_CNTL, tmp);
|
|
|
|
tmp = INPLL(pllVCLK_ECP_CNTL);
|
|
tmp |= (VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb |
|
|
VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb);
|
|
OUTPLL(pllVCLK_ECP_CNTL, tmp);
|
|
|
|
tmp = INPLL(pllPIXCLKS_CNTL);
|
|
tmp |= (PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__DISP_TVOUT_PIXCLK_TV_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_DVOCLK_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_PIXCLK_DVO_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_PIXCLK_TRANS_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_PIXCLK_TVO_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__R300_P2G2CLK_ALWAYS_ONb);
|
|
OUTPLL(pllPIXCLKS_CNTL, tmp);
|
|
|
|
tmp = INPLL(pllMCLK_MISC);
|
|
tmp |= (MCLK_MISC__MC_MCLK_DYN_ENABLE |
|
|
MCLK_MISC__IO_MCLK_DYN_ENABLE);
|
|
OUTPLL(pllMCLK_MISC, tmp);
|
|
|
|
tmp = INPLL(pllMCLK_CNTL);
|
|
tmp |= (MCLK_CNTL__FORCE_MCLKA | MCLK_CNTL__FORCE_MCLKB);
|
|
tmp &= ~(MCLK_CNTL__FORCE_YCLKA |
|
|
MCLK_CNTL__FORCE_YCLKB |
|
|
MCLK_CNTL__FORCE_MC);
|
|
|
|
/* Some releases of vbios have set DISABLE_MC_MCLKA
|
|
* and DISABLE_MC_MCLKB bits in the vbios table. Setting these
|
|
* bits will cause H/W hang when reading video memory with dynamic
|
|
* clocking enabled.
|
|
*/
|
|
if ((tmp & MCLK_CNTL__R300_DISABLE_MC_MCLKA) &&
|
|
(tmp & MCLK_CNTL__R300_DISABLE_MC_MCLKB)) {
|
|
/* If both bits are set, then check the active channels */
|
|
tmp = INPLL(pllMCLK_CNTL);
|
|
if (rinfo->vram_width == 64) {
|
|
if (INREG(MEM_CNTL) & R300_MEM_USE_CD_CH_ONLY)
|
|
tmp &= ~MCLK_CNTL__R300_DISABLE_MC_MCLKB;
|
|
else
|
|
tmp &= ~MCLK_CNTL__R300_DISABLE_MC_MCLKA;
|
|
} else {
|
|
tmp &= ~(MCLK_CNTL__R300_DISABLE_MC_MCLKA |
|
|
MCLK_CNTL__R300_DISABLE_MC_MCLKB);
|
|
}
|
|
}
|
|
OUTPLL(pllMCLK_CNTL, tmp);
|
|
return;
|
|
}
|
|
|
|
/* R300 */
|
|
if (rinfo->family == CHIP_FAMILY_R300 || rinfo->family == CHIP_FAMILY_R350) {
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
tmp &= ~(SCLK_CNTL__R300_FORCE_VAP);
|
|
tmp |= SCLK_CNTL__FORCE_CP;
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
radeon_msleep(15);
|
|
|
|
tmp = INPLL(pllSCLK_CNTL2);
|
|
tmp &= ~(SCLK_CNTL2__R300_FORCE_TCL |
|
|
SCLK_CNTL2__R300_FORCE_GA |
|
|
SCLK_CNTL2__R300_FORCE_CBA);
|
|
OUTPLL(pllSCLK_CNTL2, tmp);
|
|
}
|
|
|
|
/* Others */
|
|
|
|
tmp = INPLL( pllCLK_PWRMGT_CNTL);
|
|
tmp &= ~(CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK|
|
|
CLK_PWRMGT_CNTL__DISP_DYN_STOP_LAT_MASK|
|
|
CLK_PWRMGT_CNTL__DYN_STOP_MODE_MASK);
|
|
tmp |= CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE_MASK |
|
|
(0x01 << CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT__SHIFT);
|
|
OUTPLL( pllCLK_PWRMGT_CNTL, tmp);
|
|
radeon_msleep(15);
|
|
|
|
tmp = INPLL(pllCLK_PIN_CNTL);
|
|
tmp |= CLK_PIN_CNTL__SCLK_DYN_START_CNTL;
|
|
OUTPLL(pllCLK_PIN_CNTL, tmp);
|
|
radeon_msleep(15);
|
|
|
|
/* When DRI is enabled, setting DYN_STOP_LAT to zero can cause some R200
|
|
* to lockup randomly, leave them as set by BIOS.
|
|
*/
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
tmp &= ~SCLK_CNTL__FORCEON_MASK;
|
|
|
|
/*RAGE_6::A11 A12 A12N1 A13, RV250::A11 A12, R300*/
|
|
if ((rinfo->family == CHIP_FAMILY_RV250 &&
|
|
((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) ||
|
|
((rinfo->family == CHIP_FAMILY_RV100) &&
|
|
((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) <= CFG_ATI_REV_A13))) {
|
|
tmp |= SCLK_CNTL__FORCE_CP;
|
|
tmp |= SCLK_CNTL__FORCE_VIP;
|
|
}
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
radeon_msleep(15);
|
|
|
|
if ((rinfo->family == CHIP_FAMILY_RV200) ||
|
|
(rinfo->family == CHIP_FAMILY_RV250) ||
|
|
(rinfo->family == CHIP_FAMILY_RV280)) {
|
|
tmp = INPLL(pllSCLK_MORE_CNTL);
|
|
tmp &= ~SCLK_MORE_CNTL__FORCEON;
|
|
|
|
/* RV200::A11 A12 RV250::A11 A12 */
|
|
if (((rinfo->family == CHIP_FAMILY_RV200) ||
|
|
(rinfo->family == CHIP_FAMILY_RV250)) &&
|
|
((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13))
|
|
tmp |= SCLK_MORE_CNTL__FORCEON;
|
|
|
|
OUTPLL(pllSCLK_MORE_CNTL, tmp);
|
|
radeon_msleep(15);
|
|
}
|
|
|
|
|
|
/* RV200::A11 A12, RV250::A11 A12 */
|
|
if (((rinfo->family == CHIP_FAMILY_RV200) ||
|
|
(rinfo->family == CHIP_FAMILY_RV250)) &&
|
|
((INREG(CONFIG_CNTL) & CFG_ATI_REV_ID_MASK) < CFG_ATI_REV_A13)) {
|
|
tmp = INPLL(pllPLL_PWRMGT_CNTL);
|
|
tmp |= PLL_PWRMGT_CNTL__TCL_BYPASS_DISABLE;
|
|
OUTPLL(pllPLL_PWRMGT_CNTL, tmp);
|
|
radeon_msleep(15);
|
|
}
|
|
|
|
tmp = INPLL(pllPIXCLKS_CNTL);
|
|
tmp |= PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb;
|
|
OUTPLL(pllPIXCLKS_CNTL, tmp);
|
|
radeon_msleep(15);
|
|
|
|
tmp = INPLL(pllVCLK_ECP_CNTL);
|
|
tmp |= VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb |
|
|
VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb;
|
|
OUTPLL(pllVCLK_ECP_CNTL, tmp);
|
|
|
|
/* X doesn't do that ... hrm, we do on mobility && Macs */
|
|
#ifdef CONFIG_PPC_OF
|
|
if (rinfo->is_mobility) {
|
|
tmp = INPLL(pllMCLK_CNTL);
|
|
tmp &= ~(MCLK_CNTL__FORCE_MCLKA |
|
|
MCLK_CNTL__FORCE_MCLKB |
|
|
MCLK_CNTL__FORCE_YCLKA |
|
|
MCLK_CNTL__FORCE_YCLKB);
|
|
OUTPLL(pllMCLK_CNTL, tmp);
|
|
radeon_msleep(15);
|
|
|
|
tmp = INPLL(pllMCLK_MISC);
|
|
tmp |= MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT|
|
|
MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT|
|
|
MCLK_MISC__MC_MCLK_DYN_ENABLE|
|
|
MCLK_MISC__IO_MCLK_DYN_ENABLE;
|
|
OUTPLL(pllMCLK_MISC, tmp);
|
|
radeon_msleep(15);
|
|
}
|
|
#endif /* CONFIG_PPC_OF */
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
static void OUTMC( struct radeonfb_info *rinfo, u8 indx, u32 value)
|
|
{
|
|
OUTREG( MC_IND_INDEX, indx | MC_IND_INDEX__MC_IND_WR_EN);
|
|
OUTREG( MC_IND_DATA, value);
|
|
}
|
|
|
|
static u32 INMC(struct radeonfb_info *rinfo, u8 indx)
|
|
{
|
|
OUTREG( MC_IND_INDEX, indx);
|
|
return INREG( MC_IND_DATA);
|
|
}
|
|
|
|
static void radeon_pm_save_regs(struct radeonfb_info *rinfo, int saving_for_d3)
|
|
{
|
|
rinfo->save_regs[0] = INPLL(PLL_PWRMGT_CNTL);
|
|
rinfo->save_regs[1] = INPLL(CLK_PWRMGT_CNTL);
|
|
rinfo->save_regs[2] = INPLL(MCLK_CNTL);
|
|
rinfo->save_regs[3] = INPLL(SCLK_CNTL);
|
|
rinfo->save_regs[4] = INPLL(CLK_PIN_CNTL);
|
|
rinfo->save_regs[5] = INPLL(VCLK_ECP_CNTL);
|
|
rinfo->save_regs[6] = INPLL(PIXCLKS_CNTL);
|
|
rinfo->save_regs[7] = INPLL(MCLK_MISC);
|
|
rinfo->save_regs[8] = INPLL(P2PLL_CNTL);
|
|
|
|
rinfo->save_regs[9] = INREG(DISP_MISC_CNTL);
|
|
rinfo->save_regs[10] = INREG(DISP_PWR_MAN);
|
|
rinfo->save_regs[11] = INREG(LVDS_GEN_CNTL);
|
|
rinfo->save_regs[13] = INREG(TV_DAC_CNTL);
|
|
rinfo->save_regs[14] = INREG(BUS_CNTL1);
|
|
rinfo->save_regs[15] = INREG(CRTC_OFFSET_CNTL);
|
|
rinfo->save_regs[16] = INREG(AGP_CNTL);
|
|
rinfo->save_regs[17] = (INREG(CRTC_GEN_CNTL) & 0xfdffffff) | 0x04000000;
|
|
rinfo->save_regs[18] = (INREG(CRTC2_GEN_CNTL) & 0xfdffffff) | 0x04000000;
|
|
rinfo->save_regs[19] = INREG(GPIOPAD_A);
|
|
rinfo->save_regs[20] = INREG(GPIOPAD_EN);
|
|
rinfo->save_regs[21] = INREG(GPIOPAD_MASK);
|
|
rinfo->save_regs[22] = INREG(ZV_LCDPAD_A);
|
|
rinfo->save_regs[23] = INREG(ZV_LCDPAD_EN);
|
|
rinfo->save_regs[24] = INREG(ZV_LCDPAD_MASK);
|
|
rinfo->save_regs[25] = INREG(GPIO_VGA_DDC);
|
|
rinfo->save_regs[26] = INREG(GPIO_DVI_DDC);
|
|
rinfo->save_regs[27] = INREG(GPIO_MONID);
|
|
rinfo->save_regs[28] = INREG(GPIO_CRT2_DDC);
|
|
|
|
rinfo->save_regs[29] = INREG(SURFACE_CNTL);
|
|
rinfo->save_regs[30] = INREG(MC_FB_LOCATION);
|
|
rinfo->save_regs[31] = INREG(DISPLAY_BASE_ADDR);
|
|
rinfo->save_regs[32] = INREG(MC_AGP_LOCATION);
|
|
rinfo->save_regs[33] = INREG(CRTC2_DISPLAY_BASE_ADDR);
|
|
|
|
rinfo->save_regs[34] = INPLL(SCLK_MORE_CNTL);
|
|
rinfo->save_regs[35] = INREG(MEM_SDRAM_MODE_REG);
|
|
rinfo->save_regs[36] = INREG(BUS_CNTL);
|
|
rinfo->save_regs[39] = INREG(RBBM_CNTL);
|
|
rinfo->save_regs[40] = INREG(DAC_CNTL);
|
|
rinfo->save_regs[41] = INREG(HOST_PATH_CNTL);
|
|
rinfo->save_regs[37] = INREG(MPP_TB_CONFIG);
|
|
rinfo->save_regs[38] = INREG(FCP_CNTL);
|
|
|
|
if (rinfo->is_mobility) {
|
|
rinfo->save_regs[12] = INREG(LVDS_PLL_CNTL);
|
|
rinfo->save_regs[43] = INPLL(pllSSPLL_CNTL);
|
|
rinfo->save_regs[44] = INPLL(pllSSPLL_REF_DIV);
|
|
rinfo->save_regs[45] = INPLL(pllSSPLL_DIV_0);
|
|
rinfo->save_regs[90] = INPLL(pllSS_INT_CNTL);
|
|
rinfo->save_regs[91] = INPLL(pllSS_TST_CNTL);
|
|
rinfo->save_regs[81] = INREG(LVDS_GEN_CNTL);
|
|
}
|
|
|
|
if (rinfo->family >= CHIP_FAMILY_RV200) {
|
|
rinfo->save_regs[42] = INREG(MEM_REFRESH_CNTL);
|
|
rinfo->save_regs[46] = INREG(MC_CNTL);
|
|
rinfo->save_regs[47] = INREG(MC_INIT_GFX_LAT_TIMER);
|
|
rinfo->save_regs[48] = INREG(MC_INIT_MISC_LAT_TIMER);
|
|
rinfo->save_regs[49] = INREG(MC_TIMING_CNTL);
|
|
rinfo->save_regs[50] = INREG(MC_READ_CNTL_AB);
|
|
rinfo->save_regs[51] = INREG(MC_IOPAD_CNTL);
|
|
rinfo->save_regs[52] = INREG(MC_CHIP_IO_OE_CNTL_AB);
|
|
rinfo->save_regs[53] = INREG(MC_DEBUG);
|
|
}
|
|
rinfo->save_regs[54] = INREG(PAMAC0_DLY_CNTL);
|
|
rinfo->save_regs[55] = INREG(PAMAC1_DLY_CNTL);
|
|
rinfo->save_regs[56] = INREG(PAD_CTLR_MISC);
|
|
rinfo->save_regs[57] = INREG(FW_CNTL);
|
|
|
|
if (rinfo->family >= CHIP_FAMILY_R300) {
|
|
rinfo->save_regs[58] = INMC(rinfo, ixR300_MC_MC_INIT_WR_LAT_TIMER);
|
|
rinfo->save_regs[59] = INMC(rinfo, ixR300_MC_IMP_CNTL);
|
|
rinfo->save_regs[60] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_C0);
|
|
rinfo->save_regs[61] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_C1);
|
|
rinfo->save_regs[62] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_D0);
|
|
rinfo->save_regs[63] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_D1);
|
|
rinfo->save_regs[64] = INMC(rinfo, ixR300_MC_BIST_CNTL_3);
|
|
rinfo->save_regs[65] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_A0);
|
|
rinfo->save_regs[66] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_A1);
|
|
rinfo->save_regs[67] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_B0);
|
|
rinfo->save_regs[68] = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_B1);
|
|
rinfo->save_regs[69] = INMC(rinfo, ixR300_MC_DEBUG_CNTL);
|
|
rinfo->save_regs[70] = INMC(rinfo, ixR300_MC_DLL_CNTL);
|
|
rinfo->save_regs[71] = INMC(rinfo, ixR300_MC_IMP_CNTL_0);
|
|
rinfo->save_regs[72] = INMC(rinfo, ixR300_MC_ELPIDA_CNTL);
|
|
rinfo->save_regs[96] = INMC(rinfo, ixR300_MC_READ_CNTL_CD);
|
|
} else {
|
|
rinfo->save_regs[59] = INMC(rinfo, ixMC_IMP_CNTL);
|
|
rinfo->save_regs[65] = INMC(rinfo, ixMC_CHP_IO_CNTL_A0);
|
|
rinfo->save_regs[66] = INMC(rinfo, ixMC_CHP_IO_CNTL_A1);
|
|
rinfo->save_regs[67] = INMC(rinfo, ixMC_CHP_IO_CNTL_B0);
|
|
rinfo->save_regs[68] = INMC(rinfo, ixMC_CHP_IO_CNTL_B1);
|
|
rinfo->save_regs[71] = INMC(rinfo, ixMC_IMP_CNTL_0);
|
|
}
|
|
|
|
rinfo->save_regs[73] = INPLL(pllMPLL_CNTL);
|
|
rinfo->save_regs[74] = INPLL(pllSPLL_CNTL);
|
|
rinfo->save_regs[75] = INPLL(pllMPLL_AUX_CNTL);
|
|
rinfo->save_regs[76] = INPLL(pllSPLL_AUX_CNTL);
|
|
rinfo->save_regs[77] = INPLL(pllM_SPLL_REF_FB_DIV);
|
|
rinfo->save_regs[78] = INPLL(pllAGP_PLL_CNTL);
|
|
rinfo->save_regs[79] = INREG(PAMAC2_DLY_CNTL);
|
|
|
|
rinfo->save_regs[80] = INREG(OV0_BASE_ADDR);
|
|
rinfo->save_regs[82] = INREG(FP_GEN_CNTL);
|
|
rinfo->save_regs[83] = INREG(FP2_GEN_CNTL);
|
|
rinfo->save_regs[84] = INREG(TMDS_CNTL);
|
|
rinfo->save_regs[85] = INREG(TMDS_TRANSMITTER_CNTL);
|
|
rinfo->save_regs[86] = INREG(DISP_OUTPUT_CNTL);
|
|
rinfo->save_regs[87] = INREG(DISP_HW_DEBUG);
|
|
rinfo->save_regs[88] = INREG(TV_MASTER_CNTL);
|
|
rinfo->save_regs[89] = INPLL(pllP2PLL_REF_DIV);
|
|
rinfo->save_regs[92] = INPLL(pllPPLL_DIV_0);
|
|
rinfo->save_regs[93] = INPLL(pllPPLL_CNTL);
|
|
rinfo->save_regs[94] = INREG(GRPH_BUFFER_CNTL);
|
|
rinfo->save_regs[95] = INREG(GRPH2_BUFFER_CNTL);
|
|
rinfo->save_regs[96] = INREG(HDP_DEBUG);
|
|
rinfo->save_regs[97] = INPLL(pllMDLL_CKO);
|
|
rinfo->save_regs[98] = INPLL(pllMDLL_RDCKA);
|
|
rinfo->save_regs[99] = INPLL(pllMDLL_RDCKB);
|
|
}
|
|
|
|
static void radeon_pm_restore_regs(struct radeonfb_info *rinfo)
|
|
{
|
|
OUTPLL(P2PLL_CNTL, rinfo->save_regs[8] & 0xFFFFFFFE); /* First */
|
|
|
|
OUTPLL(PLL_PWRMGT_CNTL, rinfo->save_regs[0]);
|
|
OUTPLL(CLK_PWRMGT_CNTL, rinfo->save_regs[1]);
|
|
OUTPLL(MCLK_CNTL, rinfo->save_regs[2]);
|
|
OUTPLL(SCLK_CNTL, rinfo->save_regs[3]);
|
|
OUTPLL(CLK_PIN_CNTL, rinfo->save_regs[4]);
|
|
OUTPLL(VCLK_ECP_CNTL, rinfo->save_regs[5]);
|
|
OUTPLL(PIXCLKS_CNTL, rinfo->save_regs[6]);
|
|
OUTPLL(MCLK_MISC, rinfo->save_regs[7]);
|
|
if (rinfo->family == CHIP_FAMILY_RV350)
|
|
OUTPLL(SCLK_MORE_CNTL, rinfo->save_regs[34]);
|
|
|
|
OUTREG(SURFACE_CNTL, rinfo->save_regs[29]);
|
|
OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]);
|
|
OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]);
|
|
OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]);
|
|
OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
|
|
OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
|
|
|
|
OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]);
|
|
OUTREG(DISP_PWR_MAN, rinfo->save_regs[10]);
|
|
OUTREG(LVDS_GEN_CNTL, rinfo->save_regs[11]);
|
|
OUTREG(LVDS_PLL_CNTL,rinfo->save_regs[12]);
|
|
OUTREG(TV_DAC_CNTL, rinfo->save_regs[13]);
|
|
OUTREG(BUS_CNTL1, rinfo->save_regs[14]);
|
|
OUTREG(CRTC_OFFSET_CNTL, rinfo->save_regs[15]);
|
|
OUTREG(AGP_CNTL, rinfo->save_regs[16]);
|
|
OUTREG(CRTC_GEN_CNTL, rinfo->save_regs[17]);
|
|
OUTREG(CRTC2_GEN_CNTL, rinfo->save_regs[18]);
|
|
OUTPLL(P2PLL_CNTL, rinfo->save_regs[8]);
|
|
|
|
OUTREG(GPIOPAD_A, rinfo->save_regs[19]);
|
|
OUTREG(GPIOPAD_EN, rinfo->save_regs[20]);
|
|
OUTREG(GPIOPAD_MASK, rinfo->save_regs[21]);
|
|
OUTREG(ZV_LCDPAD_A, rinfo->save_regs[22]);
|
|
OUTREG(ZV_LCDPAD_EN, rinfo->save_regs[23]);
|
|
OUTREG(ZV_LCDPAD_MASK, rinfo->save_regs[24]);
|
|
OUTREG(GPIO_VGA_DDC, rinfo->save_regs[25]);
|
|
OUTREG(GPIO_DVI_DDC, rinfo->save_regs[26]);
|
|
OUTREG(GPIO_MONID, rinfo->save_regs[27]);
|
|
OUTREG(GPIO_CRT2_DDC, rinfo->save_regs[28]);
|
|
}
|
|
|
|
static void radeon_pm_disable_iopad(struct radeonfb_info *rinfo)
|
|
{
|
|
OUTREG(GPIOPAD_MASK, 0x0001ffff);
|
|
OUTREG(GPIOPAD_EN, 0x00000400);
|
|
OUTREG(GPIOPAD_A, 0x00000000);
|
|
OUTREG(ZV_LCDPAD_MASK, 0x00000000);
|
|
OUTREG(ZV_LCDPAD_EN, 0x00000000);
|
|
OUTREG(ZV_LCDPAD_A, 0x00000000);
|
|
OUTREG(GPIO_VGA_DDC, 0x00030000);
|
|
OUTREG(GPIO_DVI_DDC, 0x00000000);
|
|
OUTREG(GPIO_MONID, 0x00030000);
|
|
OUTREG(GPIO_CRT2_DDC, 0x00000000);
|
|
}
|
|
|
|
static void radeon_pm_program_v2clk(struct radeonfb_info *rinfo)
|
|
{
|
|
/* Set v2clk to 65MHz */
|
|
if (rinfo->family <= CHIP_FAMILY_RV280) {
|
|
OUTPLL(pllPIXCLKS_CNTL,
|
|
__INPLL(rinfo, pllPIXCLKS_CNTL)
|
|
& ~PIXCLKS_CNTL__PIX2CLK_SRC_SEL_MASK);
|
|
|
|
OUTPLL(pllP2PLL_REF_DIV, 0x0000000c);
|
|
OUTPLL(pllP2PLL_CNTL, 0x0000bf00);
|
|
} else {
|
|
OUTPLL(pllP2PLL_REF_DIV, 0x0000000c);
|
|
INPLL(pllP2PLL_REF_DIV);
|
|
OUTPLL(pllP2PLL_CNTL, 0x0000a700);
|
|
}
|
|
|
|
OUTPLL(pllP2PLL_DIV_0, 0x00020074 | P2PLL_DIV_0__P2PLL_ATOMIC_UPDATE_W);
|
|
|
|
OUTPLL(pllP2PLL_CNTL, INPLL(pllP2PLL_CNTL) & ~P2PLL_CNTL__P2PLL_SLEEP);
|
|
mdelay(1);
|
|
|
|
OUTPLL(pllP2PLL_CNTL, INPLL(pllP2PLL_CNTL) & ~P2PLL_CNTL__P2PLL_RESET);
|
|
mdelay( 1);
|
|
|
|
OUTPLL(pllPIXCLKS_CNTL,
|
|
(INPLL(pllPIXCLKS_CNTL) & ~PIXCLKS_CNTL__PIX2CLK_SRC_SEL_MASK)
|
|
| (0x03 << PIXCLKS_CNTL__PIX2CLK_SRC_SEL__SHIFT));
|
|
mdelay( 1);
|
|
}
|
|
|
|
static void radeon_pm_low_current(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = INREG(BUS_CNTL1);
|
|
if (rinfo->family <= CHIP_FAMILY_RV280) {
|
|
reg &= ~BUS_CNTL1_MOBILE_PLATFORM_SEL_MASK;
|
|
reg |= BUS_CNTL1_AGPCLK_VALID | (1<<BUS_CNTL1_MOBILE_PLATFORM_SEL_SHIFT);
|
|
} else {
|
|
reg |= 0x4080;
|
|
}
|
|
OUTREG(BUS_CNTL1, reg);
|
|
|
|
reg = INPLL(PLL_PWRMGT_CNTL);
|
|
reg |= PLL_PWRMGT_CNTL_SPLL_TURNOFF | PLL_PWRMGT_CNTL_PPLL_TURNOFF |
|
|
PLL_PWRMGT_CNTL_P2PLL_TURNOFF | PLL_PWRMGT_CNTL_TVPLL_TURNOFF;
|
|
reg &= ~PLL_PWRMGT_CNTL_SU_MCLK_USE_BCLK;
|
|
reg &= ~PLL_PWRMGT_CNTL_MOBILE_SU;
|
|
OUTPLL(PLL_PWRMGT_CNTL, reg);
|
|
|
|
reg = INREG(TV_DAC_CNTL);
|
|
reg &= ~(TV_DAC_CNTL_BGADJ_MASK |TV_DAC_CNTL_DACADJ_MASK);
|
|
reg |=TV_DAC_CNTL_BGSLEEP | TV_DAC_CNTL_RDACPD | TV_DAC_CNTL_GDACPD |
|
|
TV_DAC_CNTL_BDACPD |
|
|
(8<<TV_DAC_CNTL_BGADJ__SHIFT) | (8<<TV_DAC_CNTL_DACADJ__SHIFT);
|
|
OUTREG(TV_DAC_CNTL, reg);
|
|
|
|
reg = INREG(TMDS_TRANSMITTER_CNTL);
|
|
reg &= ~(TMDS_PLL_EN | TMDS_PLLRST);
|
|
OUTREG(TMDS_TRANSMITTER_CNTL, reg);
|
|
|
|
reg = INREG(DAC_CNTL);
|
|
reg &= ~DAC_CMP_EN;
|
|
OUTREG(DAC_CNTL, reg);
|
|
|
|
reg = INREG(DAC_CNTL2);
|
|
reg &= ~DAC2_CMP_EN;
|
|
OUTREG(DAC_CNTL2, reg);
|
|
|
|
reg = INREG(TV_DAC_CNTL);
|
|
reg &= ~TV_DAC_CNTL_DETECT;
|
|
OUTREG(TV_DAC_CNTL, reg);
|
|
}
|
|
|
|
static void radeon_pm_setup_for_suspend(struct radeonfb_info *rinfo)
|
|
{
|
|
|
|
u32 sclk_cntl, mclk_cntl, sclk_more_cntl;
|
|
|
|
u32 pll_pwrmgt_cntl;
|
|
u32 clk_pwrmgt_cntl;
|
|
u32 clk_pin_cntl;
|
|
u32 vclk_ecp_cntl;
|
|
u32 pixclks_cntl;
|
|
u32 disp_mis_cntl;
|
|
u32 disp_pwr_man;
|
|
u32 tmp;
|
|
|
|
/* Force Core Clocks */
|
|
sclk_cntl = INPLL( pllSCLK_CNTL);
|
|
sclk_cntl |= SCLK_CNTL__IDCT_MAX_DYN_STOP_LAT|
|
|
SCLK_CNTL__VIP_MAX_DYN_STOP_LAT|
|
|
SCLK_CNTL__RE_MAX_DYN_STOP_LAT|
|
|
SCLK_CNTL__PB_MAX_DYN_STOP_LAT|
|
|
SCLK_CNTL__TAM_MAX_DYN_STOP_LAT|
|
|
SCLK_CNTL__TDM_MAX_DYN_STOP_LAT|
|
|
SCLK_CNTL__RB_MAX_DYN_STOP_LAT|
|
|
|
|
SCLK_CNTL__FORCE_DISP2|
|
|
SCLK_CNTL__FORCE_CP|
|
|
SCLK_CNTL__FORCE_HDP|
|
|
SCLK_CNTL__FORCE_DISP1|
|
|
SCLK_CNTL__FORCE_TOP|
|
|
SCLK_CNTL__FORCE_E2|
|
|
SCLK_CNTL__FORCE_SE|
|
|
SCLK_CNTL__FORCE_IDCT|
|
|
SCLK_CNTL__FORCE_VIP|
|
|
|
|
SCLK_CNTL__FORCE_PB|
|
|
SCLK_CNTL__FORCE_TAM|
|
|
SCLK_CNTL__FORCE_TDM|
|
|
SCLK_CNTL__FORCE_RB|
|
|
SCLK_CNTL__FORCE_TV_SCLK|
|
|
SCLK_CNTL__FORCE_SUBPIC|
|
|
SCLK_CNTL__FORCE_OV0;
|
|
if (rinfo->family <= CHIP_FAMILY_RV280)
|
|
sclk_cntl |= SCLK_CNTL__FORCE_RE;
|
|
else
|
|
sclk_cntl |= SCLK_CNTL__SE_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__E2_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__TV_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__HDP_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__CP_MAX_DYN_STOP_LAT;
|
|
|
|
OUTPLL( pllSCLK_CNTL, sclk_cntl);
|
|
|
|
sclk_more_cntl = INPLL(pllSCLK_MORE_CNTL);
|
|
sclk_more_cntl |= SCLK_MORE_CNTL__FORCE_DISPREGS |
|
|
SCLK_MORE_CNTL__FORCE_MC_GUI |
|
|
SCLK_MORE_CNTL__FORCE_MC_HOST;
|
|
|
|
OUTPLL(pllSCLK_MORE_CNTL, sclk_more_cntl);
|
|
|
|
|
|
mclk_cntl = INPLL( pllMCLK_CNTL);
|
|
mclk_cntl &= ~( MCLK_CNTL__FORCE_MCLKA |
|
|
MCLK_CNTL__FORCE_MCLKB |
|
|
MCLK_CNTL__FORCE_YCLKA |
|
|
MCLK_CNTL__FORCE_YCLKB |
|
|
MCLK_CNTL__FORCE_MC
|
|
);
|
|
OUTPLL( pllMCLK_CNTL, mclk_cntl);
|
|
|
|
/* Force Display clocks */
|
|
vclk_ecp_cntl = INPLL( pllVCLK_ECP_CNTL);
|
|
vclk_ecp_cntl &= ~(VCLK_ECP_CNTL__PIXCLK_ALWAYS_ONb
|
|
| VCLK_ECP_CNTL__PIXCLK_DAC_ALWAYS_ONb);
|
|
vclk_ecp_cntl |= VCLK_ECP_CNTL__ECP_FORCE_ON;
|
|
OUTPLL( pllVCLK_ECP_CNTL, vclk_ecp_cntl);
|
|
|
|
|
|
pixclks_cntl = INPLL( pllPIXCLKS_CNTL);
|
|
pixclks_cntl &= ~( PIXCLKS_CNTL__PIXCLK_GV_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_BLEND_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIXCLK_DIG_TMDS_ALWAYS_ONb |
|
|
PIXCLKS_CNTL__PIXCLK_LVDS_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIXCLK_TMDS_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIX2CLK_ALWAYS_ONb|
|
|
PIXCLKS_CNTL__PIX2CLK_DAC_ALWAYS_ONb);
|
|
|
|
OUTPLL( pllPIXCLKS_CNTL, pixclks_cntl);
|
|
|
|
/* Switch off LVDS interface */
|
|
OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) &
|
|
~(LVDS_BLON | LVDS_EN | LVDS_ON | LVDS_DIGON));
|
|
|
|
/* Enable System power management */
|
|
pll_pwrmgt_cntl = INPLL( pllPLL_PWRMGT_CNTL);
|
|
|
|
pll_pwrmgt_cntl |= PLL_PWRMGT_CNTL__SPLL_TURNOFF |
|
|
PLL_PWRMGT_CNTL__MPLL_TURNOFF|
|
|
PLL_PWRMGT_CNTL__PPLL_TURNOFF|
|
|
PLL_PWRMGT_CNTL__P2PLL_TURNOFF|
|
|
PLL_PWRMGT_CNTL__TVPLL_TURNOFF;
|
|
|
|
OUTPLL( pllPLL_PWRMGT_CNTL, pll_pwrmgt_cntl);
|
|
|
|
clk_pwrmgt_cntl = INPLL( pllCLK_PWRMGT_CNTL);
|
|
|
|
clk_pwrmgt_cntl &= ~( CLK_PWRMGT_CNTL__MPLL_PWRMGT_OFF|
|
|
CLK_PWRMGT_CNTL__SPLL_PWRMGT_OFF|
|
|
CLK_PWRMGT_CNTL__PPLL_PWRMGT_OFF|
|
|
CLK_PWRMGT_CNTL__P2PLL_PWRMGT_OFF|
|
|
CLK_PWRMGT_CNTL__MCLK_TURNOFF|
|
|
CLK_PWRMGT_CNTL__SCLK_TURNOFF|
|
|
CLK_PWRMGT_CNTL__PCLK_TURNOFF|
|
|
CLK_PWRMGT_CNTL__P2CLK_TURNOFF|
|
|
CLK_PWRMGT_CNTL__TVPLL_PWRMGT_OFF|
|
|
CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN|
|
|
CLK_PWRMGT_CNTL__ENGINE_DYNCLK_MODE|
|
|
CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK|
|
|
CLK_PWRMGT_CNTL__CG_NO1_DEBUG_MASK
|
|
);
|
|
|
|
clk_pwrmgt_cntl |= CLK_PWRMGT_CNTL__GLOBAL_PMAN_EN
|
|
| CLK_PWRMGT_CNTL__DISP_PM;
|
|
|
|
OUTPLL( pllCLK_PWRMGT_CNTL, clk_pwrmgt_cntl);
|
|
|
|
clk_pin_cntl = INPLL( pllCLK_PIN_CNTL);
|
|
|
|
clk_pin_cntl &= ~CLK_PIN_CNTL__ACCESS_REGS_IN_SUSPEND;
|
|
|
|
/* because both INPLL and OUTPLL take the same lock, that's why. */
|
|
tmp = INPLL( pllMCLK_MISC) | MCLK_MISC__EN_MCLK_TRISTATE_IN_SUSPEND;
|
|
OUTPLL( pllMCLK_MISC, tmp);
|
|
|
|
/* AGP PLL control */
|
|
if (rinfo->family <= CHIP_FAMILY_RV280) {
|
|
OUTREG(BUS_CNTL1, INREG(BUS_CNTL1) | BUS_CNTL1__AGPCLK_VALID);
|
|
|
|
OUTREG(BUS_CNTL1,
|
|
(INREG(BUS_CNTL1) & ~BUS_CNTL1__MOBILE_PLATFORM_SEL_MASK)
|
|
| (2<<BUS_CNTL1__MOBILE_PLATFORM_SEL__SHIFT)); // 440BX
|
|
} else {
|
|
OUTREG(BUS_CNTL1, INREG(BUS_CNTL1));
|
|
OUTREG(BUS_CNTL1, (INREG(BUS_CNTL1) & ~0x4000) | 0x8000);
|
|
}
|
|
|
|
OUTREG(CRTC_OFFSET_CNTL, (INREG(CRTC_OFFSET_CNTL)
|
|
& ~CRTC_OFFSET_CNTL__CRTC_STEREO_SYNC_OUT_EN));
|
|
|
|
clk_pin_cntl &= ~CLK_PIN_CNTL__CG_CLK_TO_OUTPIN;
|
|
clk_pin_cntl |= CLK_PIN_CNTL__XTALIN_ALWAYS_ONb;
|
|
OUTPLL( pllCLK_PIN_CNTL, clk_pin_cntl);
|
|
|
|
/* Solano2M */
|
|
OUTREG(AGP_CNTL,
|
|
(INREG(AGP_CNTL) & ~(AGP_CNTL__MAX_IDLE_CLK_MASK))
|
|
| (0x20<<AGP_CNTL__MAX_IDLE_CLK__SHIFT));
|
|
|
|
/* ACPI mode */
|
|
/* because both INPLL and OUTPLL take the same lock, that's why. */
|
|
tmp = INPLL( pllPLL_PWRMGT_CNTL) & ~PLL_PWRMGT_CNTL__PM_MODE_SEL;
|
|
OUTPLL( pllPLL_PWRMGT_CNTL, tmp);
|
|
|
|
|
|
disp_mis_cntl = INREG(DISP_MISC_CNTL);
|
|
|
|
disp_mis_cntl &= ~( DISP_MISC_CNTL__SOFT_RESET_GRPH_PP |
|
|
DISP_MISC_CNTL__SOFT_RESET_SUBPIC_PP |
|
|
DISP_MISC_CNTL__SOFT_RESET_OV0_PP |
|
|
DISP_MISC_CNTL__SOFT_RESET_GRPH_SCLK|
|
|
DISP_MISC_CNTL__SOFT_RESET_SUBPIC_SCLK|
|
|
DISP_MISC_CNTL__SOFT_RESET_OV0_SCLK|
|
|
DISP_MISC_CNTL__SOFT_RESET_GRPH2_PP|
|
|
DISP_MISC_CNTL__SOFT_RESET_GRPH2_SCLK|
|
|
DISP_MISC_CNTL__SOFT_RESET_LVDS|
|
|
DISP_MISC_CNTL__SOFT_RESET_TMDS|
|
|
DISP_MISC_CNTL__SOFT_RESET_DIG_TMDS|
|
|
DISP_MISC_CNTL__SOFT_RESET_TV);
|
|
|
|
OUTREG(DISP_MISC_CNTL, disp_mis_cntl);
|
|
|
|
disp_pwr_man = INREG(DISP_PWR_MAN);
|
|
|
|
disp_pwr_man &= ~( DISP_PWR_MAN__DISP_PWR_MAN_D3_CRTC_EN |
|
|
DISP_PWR_MAN__DISP2_PWR_MAN_D3_CRTC2_EN |
|
|
DISP_PWR_MAN__DISP_PWR_MAN_DPMS_MASK|
|
|
DISP_PWR_MAN__DISP_D3_RST|
|
|
DISP_PWR_MAN__DISP_D3_REG_RST
|
|
);
|
|
|
|
disp_pwr_man |= DISP_PWR_MAN__DISP_D3_GRPH_RST|
|
|
DISP_PWR_MAN__DISP_D3_SUBPIC_RST|
|
|
DISP_PWR_MAN__DISP_D3_OV0_RST|
|
|
DISP_PWR_MAN__DISP_D1D2_GRPH_RST|
|
|
DISP_PWR_MAN__DISP_D1D2_SUBPIC_RST|
|
|
DISP_PWR_MAN__DISP_D1D2_OV0_RST|
|
|
DISP_PWR_MAN__DIG_TMDS_ENABLE_RST|
|
|
DISP_PWR_MAN__TV_ENABLE_RST|
|
|
// DISP_PWR_MAN__AUTO_PWRUP_EN|
|
|
0;
|
|
|
|
OUTREG(DISP_PWR_MAN, disp_pwr_man);
|
|
|
|
clk_pwrmgt_cntl = INPLL( pllCLK_PWRMGT_CNTL);
|
|
pll_pwrmgt_cntl = INPLL( pllPLL_PWRMGT_CNTL) ;
|
|
clk_pin_cntl = INPLL( pllCLK_PIN_CNTL);
|
|
disp_pwr_man = INREG(DISP_PWR_MAN);
|
|
|
|
|
|
/* D2 */
|
|
clk_pwrmgt_cntl |= CLK_PWRMGT_CNTL__DISP_PM;
|
|
pll_pwrmgt_cntl |= PLL_PWRMGT_CNTL__MOBILE_SU | PLL_PWRMGT_CNTL__SU_SCLK_USE_BCLK;
|
|
clk_pin_cntl |= CLK_PIN_CNTL__XTALIN_ALWAYS_ONb;
|
|
disp_pwr_man &= ~(DISP_PWR_MAN__DISP_PWR_MAN_D3_CRTC_EN_MASK
|
|
| DISP_PWR_MAN__DISP2_PWR_MAN_D3_CRTC2_EN_MASK);
|
|
|
|
OUTPLL( pllCLK_PWRMGT_CNTL, clk_pwrmgt_cntl);
|
|
OUTPLL( pllPLL_PWRMGT_CNTL, pll_pwrmgt_cntl);
|
|
OUTPLL( pllCLK_PIN_CNTL, clk_pin_cntl);
|
|
OUTREG(DISP_PWR_MAN, disp_pwr_man);
|
|
|
|
/* disable display request & disable display */
|
|
OUTREG( CRTC_GEN_CNTL, (INREG( CRTC_GEN_CNTL) & ~CRTC_GEN_CNTL__CRTC_EN)
|
|
| CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B);
|
|
OUTREG( CRTC2_GEN_CNTL, (INREG( CRTC2_GEN_CNTL) & ~CRTC2_GEN_CNTL__CRTC2_EN)
|
|
| CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B);
|
|
|
|
mdelay(17);
|
|
|
|
}
|
|
|
|
static void radeon_pm_yclk_mclk_sync(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 mc_chp_io_cntl_a1, mc_chp_io_cntl_b1;
|
|
|
|
mc_chp_io_cntl_a1 = INMC( rinfo, ixMC_CHP_IO_CNTL_A1)
|
|
& ~MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA_MASK;
|
|
mc_chp_io_cntl_b1 = INMC( rinfo, ixMC_CHP_IO_CNTL_B1)
|
|
& ~MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB_MASK;
|
|
|
|
OUTMC( rinfo, ixMC_CHP_IO_CNTL_A1, mc_chp_io_cntl_a1
|
|
| (1<<MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA__SHIFT));
|
|
OUTMC( rinfo, ixMC_CHP_IO_CNTL_B1, mc_chp_io_cntl_b1
|
|
| (1<<MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB__SHIFT));
|
|
|
|
OUTMC( rinfo, ixMC_CHP_IO_CNTL_A1, mc_chp_io_cntl_a1);
|
|
OUTMC( rinfo, ixMC_CHP_IO_CNTL_B1, mc_chp_io_cntl_b1);
|
|
|
|
mdelay( 1);
|
|
}
|
|
|
|
static void radeon_pm_yclk_mclk_sync_m10(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 mc_chp_io_cntl_a1, mc_chp_io_cntl_b1;
|
|
|
|
mc_chp_io_cntl_a1 = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_A1)
|
|
& ~MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA_MASK;
|
|
mc_chp_io_cntl_b1 = INMC(rinfo, ixR300_MC_CHP_IO_CNTL_B1)
|
|
& ~MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB_MASK;
|
|
|
|
OUTMC( rinfo, ixR300_MC_CHP_IO_CNTL_A1,
|
|
mc_chp_io_cntl_a1 | (1<<MC_CHP_IO_CNTL_A1__MEM_SYNC_ENA__SHIFT));
|
|
OUTMC( rinfo, ixR300_MC_CHP_IO_CNTL_B1,
|
|
mc_chp_io_cntl_b1 | (1<<MC_CHP_IO_CNTL_B1__MEM_SYNC_ENB__SHIFT));
|
|
|
|
OUTMC( rinfo, ixR300_MC_CHP_IO_CNTL_A1, mc_chp_io_cntl_a1);
|
|
OUTMC( rinfo, ixR300_MC_CHP_IO_CNTL_B1, mc_chp_io_cntl_b1);
|
|
|
|
mdelay( 1);
|
|
}
|
|
|
|
static void radeon_pm_program_mode_reg(struct radeonfb_info *rinfo, u16 value,
|
|
u8 delay_required)
|
|
{
|
|
u32 mem_sdram_mode;
|
|
|
|
mem_sdram_mode = INREG( MEM_SDRAM_MODE_REG);
|
|
|
|
mem_sdram_mode &= ~MEM_SDRAM_MODE_REG__MEM_MODE_REG_MASK;
|
|
mem_sdram_mode |= (value<<MEM_SDRAM_MODE_REG__MEM_MODE_REG__SHIFT)
|
|
| MEM_SDRAM_MODE_REG__MEM_CFG_TYPE;
|
|
OUTREG( MEM_SDRAM_MODE_REG, mem_sdram_mode);
|
|
if (delay_required >= 2)
|
|
mdelay(1);
|
|
|
|
mem_sdram_mode |= MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET;
|
|
OUTREG( MEM_SDRAM_MODE_REG, mem_sdram_mode);
|
|
if (delay_required >= 2)
|
|
mdelay(1);
|
|
|
|
mem_sdram_mode &= ~MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET;
|
|
OUTREG( MEM_SDRAM_MODE_REG, mem_sdram_mode);
|
|
if (delay_required >= 2)
|
|
mdelay(1);
|
|
|
|
if (delay_required) {
|
|
do {
|
|
if (delay_required >= 2)
|
|
mdelay(1);
|
|
} while ((INREG(MC_STATUS)
|
|
& (MC_STATUS__MEM_PWRUP_COMPL_A |
|
|
MC_STATUS__MEM_PWRUP_COMPL_B)) == 0);
|
|
}
|
|
}
|
|
|
|
static void radeon_pm_m10_program_mode_wait(struct radeonfb_info *rinfo)
|
|
{
|
|
int cnt;
|
|
|
|
for (cnt = 0; cnt < 100; ++cnt) {
|
|
mdelay(1);
|
|
if (INREG(MC_STATUS) & (MC_STATUS__MEM_PWRUP_COMPL_A
|
|
| MC_STATUS__MEM_PWRUP_COMPL_B))
|
|
break;
|
|
}
|
|
}
|
|
|
|
|
|
static void radeon_pm_enable_dll(struct radeonfb_info *rinfo)
|
|
{
|
|
#define DLL_RESET_DELAY 5
|
|
#define DLL_SLEEP_DELAY 1
|
|
|
|
u32 cko = INPLL(pllMDLL_CKO) | MDLL_CKO__MCKOA_SLEEP
|
|
| MDLL_CKO__MCKOA_RESET;
|
|
u32 cka = INPLL(pllMDLL_RDCKA) | MDLL_RDCKA__MRDCKA0_SLEEP
|
|
| MDLL_RDCKA__MRDCKA1_SLEEP | MDLL_RDCKA__MRDCKA0_RESET
|
|
| MDLL_RDCKA__MRDCKA1_RESET;
|
|
u32 ckb = INPLL(pllMDLL_RDCKB) | MDLL_RDCKB__MRDCKB0_SLEEP
|
|
| MDLL_RDCKB__MRDCKB1_SLEEP | MDLL_RDCKB__MRDCKB0_RESET
|
|
| MDLL_RDCKB__MRDCKB1_RESET;
|
|
|
|
/* Setting up the DLL range for write */
|
|
OUTPLL(pllMDLL_CKO, cko);
|
|
OUTPLL(pllMDLL_RDCKA, cka);
|
|
OUTPLL(pllMDLL_RDCKB, ckb);
|
|
|
|
mdelay(DLL_RESET_DELAY*2);
|
|
|
|
cko &= ~(MDLL_CKO__MCKOA_SLEEP | MDLL_CKO__MCKOB_SLEEP);
|
|
OUTPLL(pllMDLL_CKO, cko);
|
|
mdelay(DLL_SLEEP_DELAY);
|
|
cko &= ~(MDLL_CKO__MCKOA_RESET | MDLL_CKO__MCKOB_RESET);
|
|
OUTPLL(pllMDLL_CKO, cko);
|
|
mdelay(DLL_RESET_DELAY);
|
|
|
|
cka &= ~(MDLL_RDCKA__MRDCKA0_SLEEP | MDLL_RDCKA__MRDCKA1_SLEEP);
|
|
OUTPLL(pllMDLL_RDCKA, cka);
|
|
mdelay(DLL_SLEEP_DELAY);
|
|
cka &= ~(MDLL_RDCKA__MRDCKA0_RESET | MDLL_RDCKA__MRDCKA1_RESET);
|
|
OUTPLL(pllMDLL_RDCKA, cka);
|
|
mdelay(DLL_RESET_DELAY);
|
|
|
|
ckb &= ~(MDLL_RDCKB__MRDCKB0_SLEEP | MDLL_RDCKB__MRDCKB1_SLEEP);
|
|
OUTPLL(pllMDLL_RDCKB, ckb);
|
|
mdelay(DLL_SLEEP_DELAY);
|
|
ckb &= ~(MDLL_RDCKB__MRDCKB0_RESET | MDLL_RDCKB__MRDCKB1_RESET);
|
|
OUTPLL(pllMDLL_RDCKB, ckb);
|
|
mdelay(DLL_RESET_DELAY);
|
|
|
|
|
|
#undef DLL_RESET_DELAY
|
|
#undef DLL_SLEEP_DELAY
|
|
}
|
|
|
|
static void radeon_pm_enable_dll_m10(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 dll_value;
|
|
u32 dll_sleep_mask = 0;
|
|
u32 dll_reset_mask = 0;
|
|
u32 mc;
|
|
|
|
#define DLL_RESET_DELAY 5
|
|
#define DLL_SLEEP_DELAY 1
|
|
|
|
OUTMC(rinfo, ixR300_MC_DLL_CNTL, rinfo->save_regs[70]);
|
|
mc = INREG(MC_CNTL);
|
|
/* Check which channels are enabled */
|
|
switch (mc & 0x3) {
|
|
case 1:
|
|
if (mc & 0x4)
|
|
break;
|
|
case 2:
|
|
dll_sleep_mask |= MDLL_R300_RDCK__MRDCKB_SLEEP;
|
|
dll_reset_mask |= MDLL_R300_RDCK__MRDCKB_RESET;
|
|
case 0:
|
|
dll_sleep_mask |= MDLL_R300_RDCK__MRDCKA_SLEEP;
|
|
dll_reset_mask |= MDLL_R300_RDCK__MRDCKA_RESET;
|
|
}
|
|
switch (mc & 0x3) {
|
|
case 1:
|
|
if (!(mc & 0x4))
|
|
break;
|
|
case 2:
|
|
dll_sleep_mask |= MDLL_R300_RDCK__MRDCKD_SLEEP;
|
|
dll_reset_mask |= MDLL_R300_RDCK__MRDCKD_RESET;
|
|
dll_sleep_mask |= MDLL_R300_RDCK__MRDCKC_SLEEP;
|
|
dll_reset_mask |= MDLL_R300_RDCK__MRDCKC_RESET;
|
|
}
|
|
|
|
dll_value = INPLL(pllMDLL_RDCKA);
|
|
|
|
/* Power Up */
|
|
dll_value &= ~(dll_sleep_mask);
|
|
OUTPLL(pllMDLL_RDCKA, dll_value);
|
|
mdelay( DLL_SLEEP_DELAY);
|
|
|
|
dll_value &= ~(dll_reset_mask);
|
|
OUTPLL(pllMDLL_RDCKA, dll_value);
|
|
mdelay( DLL_RESET_DELAY);
|
|
|
|
#undef DLL_RESET_DELAY
|
|
#undef DLL_SLEEP_DELAY
|
|
}
|
|
|
|
|
|
static void radeon_pm_full_reset_sdram(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 crtcGenCntl, crtcGenCntl2, memRefreshCntl, crtc_more_cntl,
|
|
fp_gen_cntl, fp2_gen_cntl;
|
|
|
|
crtcGenCntl = INREG( CRTC_GEN_CNTL);
|
|
crtcGenCntl2 = INREG( CRTC2_GEN_CNTL);
|
|
|
|
crtc_more_cntl = INREG( CRTC_MORE_CNTL);
|
|
fp_gen_cntl = INREG( FP_GEN_CNTL);
|
|
fp2_gen_cntl = INREG( FP2_GEN_CNTL);
|
|
|
|
|
|
OUTREG( CRTC_MORE_CNTL, 0);
|
|
OUTREG( FP_GEN_CNTL, 0);
|
|
OUTREG( FP2_GEN_CNTL,0);
|
|
|
|
OUTREG( CRTC_GEN_CNTL, (crtcGenCntl | CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B) );
|
|
OUTREG( CRTC2_GEN_CNTL, (crtcGenCntl2 | CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B) );
|
|
|
|
/* This is the code for the Aluminium PowerBooks M10 */
|
|
if (rinfo->family == CHIP_FAMILY_RV350) {
|
|
u32 sdram_mode_reg = rinfo->save_regs[35];
|
|
static u32 default_mrtable[] =
|
|
{ 0x21320032,
|
|
0x21321000, 0xa1321000, 0x21321000, 0xffffffff,
|
|
0x21320032, 0xa1320032, 0x21320032, 0xffffffff,
|
|
0x21321002, 0xa1321002, 0x21321002, 0xffffffff,
|
|
0x21320132, 0xa1320132, 0x21320132, 0xffffffff,
|
|
0x21320032, 0xa1320032, 0x21320032, 0xffffffff,
|
|
0x31320032 };
|
|
|
|
u32 *mrtable = default_mrtable;
|
|
int i, mrtable_size = ARRAY_SIZE(default_mrtable);
|
|
|
|
mdelay(30);
|
|
|
|
/* Disable refresh */
|
|
memRefreshCntl = INREG( MEM_REFRESH_CNTL)
|
|
& ~MEM_REFRESH_CNTL__MEM_REFRESH_DIS;
|
|
OUTREG( MEM_REFRESH_CNTL, memRefreshCntl
|
|
| MEM_REFRESH_CNTL__MEM_REFRESH_DIS);
|
|
|
|
/* Configure and enable M & SPLLs */
|
|
radeon_pm_enable_dll_m10(rinfo);
|
|
radeon_pm_yclk_mclk_sync_m10(rinfo);
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
if (rinfo->of_node != NULL) {
|
|
int size;
|
|
|
|
mrtable = (u32 *)get_property(rinfo->of_node, "ATY,MRT", &size);
|
|
if (mrtable)
|
|
mrtable_size = size >> 2;
|
|
else
|
|
mrtable = default_mrtable;
|
|
}
|
|
#endif /* CONFIG_PPC_OF */
|
|
|
|
/* Program the SDRAM */
|
|
sdram_mode_reg = mrtable[0];
|
|
OUTREG(MEM_SDRAM_MODE_REG, sdram_mode_reg);
|
|
for (i = 0; i < mrtable_size; i++) {
|
|
if (mrtable[i] == 0xffffffffu)
|
|
radeon_pm_m10_program_mode_wait(rinfo);
|
|
else {
|
|
sdram_mode_reg &= ~(MEM_SDRAM_MODE_REG__MEM_MODE_REG_MASK
|
|
| MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE
|
|
| MEM_SDRAM_MODE_REG__MEM_SDRAM_RESET);
|
|
sdram_mode_reg |= mrtable[i];
|
|
|
|
OUTREG(MEM_SDRAM_MODE_REG, sdram_mode_reg);
|
|
mdelay(1);
|
|
}
|
|
}
|
|
|
|
/* Restore memory refresh */
|
|
OUTREG(MEM_REFRESH_CNTL, memRefreshCntl);
|
|
mdelay(30);
|
|
|
|
}
|
|
/* Here come the desktop RV200 "QW" card */
|
|
else if (!rinfo->is_mobility && rinfo->family == CHIP_FAMILY_RV200) {
|
|
/* Disable refresh */
|
|
memRefreshCntl = INREG( MEM_REFRESH_CNTL)
|
|
& ~MEM_REFRESH_CNTL__MEM_REFRESH_DIS;
|
|
OUTREG(MEM_REFRESH_CNTL, memRefreshCntl
|
|
| MEM_REFRESH_CNTL__MEM_REFRESH_DIS);
|
|
mdelay(30);
|
|
|
|
/* Reset memory */
|
|
OUTREG(MEM_SDRAM_MODE_REG,
|
|
INREG( MEM_SDRAM_MODE_REG) & ~MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE);
|
|
|
|
radeon_pm_program_mode_reg(rinfo, 0x2002, 2);
|
|
radeon_pm_program_mode_reg(rinfo, 0x0132, 2);
|
|
radeon_pm_program_mode_reg(rinfo, 0x0032, 2);
|
|
|
|
OUTREG(MEM_SDRAM_MODE_REG,
|
|
INREG(MEM_SDRAM_MODE_REG) | MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE);
|
|
|
|
OUTREG( MEM_REFRESH_CNTL, memRefreshCntl);
|
|
|
|
}
|
|
/* The M6 */
|
|
else if (rinfo->is_mobility && rinfo->family == CHIP_FAMILY_RV100) {
|
|
/* Disable refresh */
|
|
memRefreshCntl = INREG(EXT_MEM_CNTL) & ~(1 << 20);
|
|
OUTREG( EXT_MEM_CNTL, memRefreshCntl | (1 << 20));
|
|
|
|
/* Reset memory */
|
|
OUTREG( MEM_SDRAM_MODE_REG,
|
|
INREG( MEM_SDRAM_MODE_REG)
|
|
& ~MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE);
|
|
|
|
/* DLL */
|
|
radeon_pm_enable_dll(rinfo);
|
|
|
|
/* MLCK / YCLK sync */
|
|
radeon_pm_yclk_mclk_sync(rinfo);
|
|
|
|
/* Program Mode Register */
|
|
radeon_pm_program_mode_reg(rinfo, 0x2000, 1);
|
|
radeon_pm_program_mode_reg(rinfo, 0x2001, 1);
|
|
radeon_pm_program_mode_reg(rinfo, 0x2002, 1);
|
|
radeon_pm_program_mode_reg(rinfo, 0x0132, 1);
|
|
radeon_pm_program_mode_reg(rinfo, 0x0032, 1);
|
|
|
|
/* Complete & re-enable refresh */
|
|
OUTREG( MEM_SDRAM_MODE_REG,
|
|
INREG( MEM_SDRAM_MODE_REG) | MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE);
|
|
|
|
OUTREG(EXT_MEM_CNTL, memRefreshCntl);
|
|
}
|
|
/* And finally, the M7..M9 models, including M9+ (RV280) */
|
|
else if (rinfo->is_mobility) {
|
|
|
|
/* Disable refresh */
|
|
memRefreshCntl = INREG( MEM_REFRESH_CNTL)
|
|
& ~MEM_REFRESH_CNTL__MEM_REFRESH_DIS;
|
|
OUTREG( MEM_REFRESH_CNTL, memRefreshCntl
|
|
| MEM_REFRESH_CNTL__MEM_REFRESH_DIS);
|
|
|
|
/* Reset memory */
|
|
OUTREG( MEM_SDRAM_MODE_REG,
|
|
INREG( MEM_SDRAM_MODE_REG)
|
|
& ~MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE);
|
|
|
|
/* DLL */
|
|
radeon_pm_enable_dll(rinfo);
|
|
|
|
/* MLCK / YCLK sync */
|
|
radeon_pm_yclk_mclk_sync(rinfo);
|
|
|
|
/* M6, M7 and M9 so far ... */
|
|
if (rinfo->family <= CHIP_FAMILY_RV250) {
|
|
radeon_pm_program_mode_reg(rinfo, 0x2000, 1);
|
|
radeon_pm_program_mode_reg(rinfo, 0x2001, 1);
|
|
radeon_pm_program_mode_reg(rinfo, 0x2002, 1);
|
|
radeon_pm_program_mode_reg(rinfo, 0x0132, 1);
|
|
radeon_pm_program_mode_reg(rinfo, 0x0032, 1);
|
|
}
|
|
/* M9+ (iBook G4) */
|
|
else if (rinfo->family == CHIP_FAMILY_RV280) {
|
|
radeon_pm_program_mode_reg(rinfo, 0x2000, 1);
|
|
radeon_pm_program_mode_reg(rinfo, 0x0132, 1);
|
|
radeon_pm_program_mode_reg(rinfo, 0x0032, 1);
|
|
}
|
|
|
|
/* Complete & re-enable refresh */
|
|
OUTREG( MEM_SDRAM_MODE_REG,
|
|
INREG( MEM_SDRAM_MODE_REG) | MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE);
|
|
|
|
OUTREG( MEM_REFRESH_CNTL, memRefreshCntl);
|
|
}
|
|
|
|
OUTREG( CRTC_GEN_CNTL, crtcGenCntl);
|
|
OUTREG( CRTC2_GEN_CNTL, crtcGenCntl2);
|
|
OUTREG( FP_GEN_CNTL, fp_gen_cntl);
|
|
OUTREG( FP2_GEN_CNTL, fp2_gen_cntl);
|
|
|
|
OUTREG( CRTC_MORE_CNTL, crtc_more_cntl);
|
|
|
|
mdelay( 15);
|
|
}
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
|
|
static void radeon_pm_reset_pad_ctlr_strength(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 tmp, tmp2;
|
|
int i,j;
|
|
|
|
/* Reset the PAD_CTLR_STRENGTH & wait for it to be stable */
|
|
INREG(PAD_CTLR_STRENGTH);
|
|
OUTREG(PAD_CTLR_STRENGTH, INREG(PAD_CTLR_STRENGTH) & ~PAD_MANUAL_OVERRIDE);
|
|
tmp = INREG(PAD_CTLR_STRENGTH);
|
|
for (i = j = 0; i < 65; ++i) {
|
|
mdelay(1);
|
|
tmp2 = INREG(PAD_CTLR_STRENGTH);
|
|
if (tmp != tmp2) {
|
|
tmp = tmp2;
|
|
i = 0;
|
|
j++;
|
|
if (j > 10) {
|
|
printk(KERN_WARNING "radeon: PAD_CTLR_STRENGTH doesn't "
|
|
"stabilize !\n");
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void radeon_pm_all_ppls_off(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = INPLL(pllPPLL_CNTL);
|
|
OUTPLL(pllPPLL_CNTL, tmp | 0x3);
|
|
tmp = INPLL(pllP2PLL_CNTL);
|
|
OUTPLL(pllP2PLL_CNTL, tmp | 0x3);
|
|
tmp = INPLL(pllSPLL_CNTL);
|
|
OUTPLL(pllSPLL_CNTL, tmp | 0x3);
|
|
tmp = INPLL(pllMPLL_CNTL);
|
|
OUTPLL(pllMPLL_CNTL, tmp | 0x3);
|
|
}
|
|
|
|
static void radeon_pm_start_mclk_sclk(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 tmp;
|
|
|
|
/* Switch SPLL to PCI source */
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
OUTPLL(pllSCLK_CNTL, tmp & ~SCLK_CNTL__SCLK_SRC_SEL_MASK);
|
|
|
|
/* Reconfigure SPLL charge pump, VCO gain, duty cycle */
|
|
tmp = INPLL(pllSPLL_CNTL);
|
|
OUTREG8(CLOCK_CNTL_INDEX, pllSPLL_CNTL + PLL_WR_EN);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
OUTREG8(CLOCK_CNTL_DATA + 1, (tmp >> 8) & 0xff);
|
|
radeon_pll_errata_after_data(rinfo);
|
|
|
|
/* Set SPLL feedback divider */
|
|
tmp = INPLL(pllM_SPLL_REF_FB_DIV);
|
|
tmp = (tmp & 0xff00fffful) | (rinfo->save_regs[77] & 0x00ff0000ul);
|
|
OUTPLL(pllM_SPLL_REF_FB_DIV, tmp);
|
|
|
|
/* Power up SPLL */
|
|
tmp = INPLL(pllSPLL_CNTL);
|
|
OUTPLL(pllSPLL_CNTL, tmp & ~1);
|
|
(void)INPLL(pllSPLL_CNTL);
|
|
|
|
mdelay(10);
|
|
|
|
/* Release SPLL reset */
|
|
tmp = INPLL(pllSPLL_CNTL);
|
|
OUTPLL(pllSPLL_CNTL, tmp & ~0x2);
|
|
(void)INPLL(pllSPLL_CNTL);
|
|
|
|
mdelay(10);
|
|
|
|
/* Select SCLK source */
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
tmp &= ~SCLK_CNTL__SCLK_SRC_SEL_MASK;
|
|
tmp |= rinfo->save_regs[3] & SCLK_CNTL__SCLK_SRC_SEL_MASK;
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
(void)INPLL(pllSCLK_CNTL);
|
|
|
|
mdelay(10);
|
|
|
|
/* Reconfigure MPLL charge pump, VCO gain, duty cycle */
|
|
tmp = INPLL(pllMPLL_CNTL);
|
|
OUTREG8(CLOCK_CNTL_INDEX, pllMPLL_CNTL + PLL_WR_EN);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
OUTREG8(CLOCK_CNTL_DATA + 1, (tmp >> 8) & 0xff);
|
|
radeon_pll_errata_after_data(rinfo);
|
|
|
|
/* Set MPLL feedback divider */
|
|
tmp = INPLL(pllM_SPLL_REF_FB_DIV);
|
|
tmp = (tmp & 0xffff00fful) | (rinfo->save_regs[77] & 0x0000ff00ul);
|
|
|
|
OUTPLL(pllM_SPLL_REF_FB_DIV, tmp);
|
|
/* Power up MPLL */
|
|
tmp = INPLL(pllMPLL_CNTL);
|
|
OUTPLL(pllMPLL_CNTL, tmp & ~0x2);
|
|
(void)INPLL(pllMPLL_CNTL);
|
|
|
|
mdelay(10);
|
|
|
|
/* Un-reset MPLL */
|
|
tmp = INPLL(pllMPLL_CNTL);
|
|
OUTPLL(pllMPLL_CNTL, tmp & ~0x1);
|
|
(void)INPLL(pllMPLL_CNTL);
|
|
|
|
mdelay(10);
|
|
|
|
/* Select source for MCLK */
|
|
tmp = INPLL(pllMCLK_CNTL);
|
|
tmp |= rinfo->save_regs[2] & 0xffff;
|
|
OUTPLL(pllMCLK_CNTL, tmp);
|
|
(void)INPLL(pllMCLK_CNTL);
|
|
|
|
mdelay(10);
|
|
}
|
|
|
|
static void radeon_pm_m10_disable_spread_spectrum(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 r2ec;
|
|
|
|
/* GACK ! I though we didn't have a DDA on Radeon's anymore
|
|
* here we rewrite with the same value, ... I suppose we clear
|
|
* some bits that are already clear ? Or maybe this 0x2ec
|
|
* register is something new ?
|
|
*/
|
|
mdelay(20);
|
|
r2ec = INREG(VGA_DDA_ON_OFF);
|
|
OUTREG(VGA_DDA_ON_OFF, r2ec);
|
|
mdelay(1);
|
|
|
|
/* Spread spectrum PLLL off */
|
|
OUTPLL(pllSSPLL_CNTL, 0xbf03);
|
|
|
|
/* Spread spectrum disabled */
|
|
OUTPLL(pllSS_INT_CNTL, rinfo->save_regs[90] & ~3);
|
|
|
|
/* The trace shows read & rewrite of LVDS_PLL_CNTL here with same
|
|
* value, not sure what for...
|
|
*/
|
|
|
|
r2ec |= 0x3f0;
|
|
OUTREG(VGA_DDA_ON_OFF, r2ec);
|
|
mdelay(1);
|
|
}
|
|
|
|
static void radeon_pm_m10_enable_lvds_spread_spectrum(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 r2ec, tmp;
|
|
|
|
/* GACK (bis) ! I though we didn't have a DDA on Radeon's anymore
|
|
* here we rewrite with the same value, ... I suppose we clear/set
|
|
* some bits that are already clear/set ?
|
|
*/
|
|
r2ec = INREG(VGA_DDA_ON_OFF);
|
|
OUTREG(VGA_DDA_ON_OFF, r2ec);
|
|
mdelay(1);
|
|
|
|
/* Enable spread spectrum */
|
|
OUTPLL(pllSSPLL_CNTL, rinfo->save_regs[43] | 3);
|
|
mdelay(3);
|
|
|
|
OUTPLL(pllSSPLL_REF_DIV, rinfo->save_regs[44]);
|
|
OUTPLL(pllSSPLL_DIV_0, rinfo->save_regs[45]);
|
|
tmp = INPLL(pllSSPLL_CNTL);
|
|
OUTPLL(pllSSPLL_CNTL, tmp & ~0x2);
|
|
mdelay(6);
|
|
tmp = INPLL(pllSSPLL_CNTL);
|
|
OUTPLL(pllSSPLL_CNTL, tmp & ~0x1);
|
|
mdelay(5);
|
|
|
|
OUTPLL(pllSS_INT_CNTL, rinfo->save_regs[90]);
|
|
|
|
r2ec |= 8;
|
|
OUTREG(VGA_DDA_ON_OFF, r2ec);
|
|
mdelay(20);
|
|
|
|
/* Enable LVDS interface */
|
|
tmp = INREG(LVDS_GEN_CNTL);
|
|
OUTREG(LVDS_GEN_CNTL, tmp | LVDS_EN);
|
|
|
|
/* Enable LVDS_PLL */
|
|
tmp = INREG(LVDS_PLL_CNTL);
|
|
tmp &= ~0x30000;
|
|
tmp |= 0x10000;
|
|
OUTREG(LVDS_PLL_CNTL, tmp);
|
|
|
|
OUTPLL(pllSCLK_MORE_CNTL, rinfo->save_regs[34]);
|
|
OUTPLL(pllSS_TST_CNTL, rinfo->save_regs[91]);
|
|
|
|
/* The trace reads that one here, waiting for something to settle down ? */
|
|
INREG(RBBM_STATUS);
|
|
|
|
/* Ugh ? SS_TST_DEC is supposed to be a read register in the
|
|
* R300 register spec at least...
|
|
*/
|
|
tmp = INPLL(pllSS_TST_CNTL);
|
|
tmp |= 0x00400000;
|
|
OUTPLL(pllSS_TST_CNTL, tmp);
|
|
}
|
|
|
|
static void radeon_pm_restore_pixel_pll(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 tmp;
|
|
|
|
OUTREG8(CLOCK_CNTL_INDEX, pllHTOTAL_CNTL + PLL_WR_EN);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
OUTREG8(CLOCK_CNTL_DATA, 0);
|
|
radeon_pll_errata_after_data(rinfo);
|
|
|
|
tmp = INPLL(pllVCLK_ECP_CNTL);
|
|
OUTPLL(pllVCLK_ECP_CNTL, tmp | 0x80);
|
|
mdelay(5);
|
|
|
|
tmp = INPLL(pllPPLL_REF_DIV);
|
|
tmp = (tmp & ~PPLL_REF_DIV_MASK) | rinfo->pll.ref_div;
|
|
OUTPLL(pllPPLL_REF_DIV, tmp);
|
|
INPLL(pllPPLL_REF_DIV);
|
|
|
|
/* Reconfigure SPLL charge pump, VCO gain, duty cycle,
|
|
* probably useless since we already did it ...
|
|
*/
|
|
tmp = INPLL(pllPPLL_CNTL);
|
|
OUTREG8(CLOCK_CNTL_INDEX, pllSPLL_CNTL + PLL_WR_EN);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
OUTREG8(CLOCK_CNTL_DATA + 1, (tmp >> 8) & 0xff);
|
|
radeon_pll_errata_after_data(rinfo);
|
|
|
|
/* Restore our "reference" PPLL divider set by firmware
|
|
* according to proper spread spectrum calculations
|
|
*/
|
|
OUTPLL(pllPPLL_DIV_0, rinfo->save_regs[92]);
|
|
|
|
tmp = INPLL(pllPPLL_CNTL);
|
|
OUTPLL(pllPPLL_CNTL, tmp & ~0x2);
|
|
mdelay(5);
|
|
|
|
tmp = INPLL(pllPPLL_CNTL);
|
|
OUTPLL(pllPPLL_CNTL, tmp & ~0x1);
|
|
mdelay(5);
|
|
|
|
tmp = INPLL(pllVCLK_ECP_CNTL);
|
|
OUTPLL(pllVCLK_ECP_CNTL, tmp | 3);
|
|
mdelay(5);
|
|
|
|
tmp = INPLL(pllVCLK_ECP_CNTL);
|
|
OUTPLL(pllVCLK_ECP_CNTL, tmp | 3);
|
|
mdelay(5);
|
|
|
|
/* Switch pixel clock to firmware default div 0 */
|
|
OUTREG8(CLOCK_CNTL_INDEX+1, 0);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
radeon_pll_errata_after_data(rinfo);
|
|
}
|
|
|
|
static void radeon_pm_m10_reconfigure_mc(struct radeonfb_info *rinfo)
|
|
{
|
|
OUTREG(MC_CNTL, rinfo->save_regs[46]);
|
|
OUTREG(MC_INIT_GFX_LAT_TIMER, rinfo->save_regs[47]);
|
|
OUTREG(MC_INIT_MISC_LAT_TIMER, rinfo->save_regs[48]);
|
|
OUTREG(MEM_SDRAM_MODE_REG,
|
|
rinfo->save_regs[35] & ~MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE);
|
|
OUTREG(MC_TIMING_CNTL, rinfo->save_regs[49]);
|
|
OUTREG(MEM_REFRESH_CNTL, rinfo->save_regs[42]);
|
|
OUTREG(MC_READ_CNTL_AB, rinfo->save_regs[50]);
|
|
OUTREG(MC_CHIP_IO_OE_CNTL_AB, rinfo->save_regs[52]);
|
|
OUTREG(MC_IOPAD_CNTL, rinfo->save_regs[51]);
|
|
OUTREG(MC_DEBUG, rinfo->save_regs[53]);
|
|
|
|
OUTMC(rinfo, ixR300_MC_MC_INIT_WR_LAT_TIMER, rinfo->save_regs[58]);
|
|
OUTMC(rinfo, ixR300_MC_IMP_CNTL, rinfo->save_regs[59]);
|
|
OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_C0, rinfo->save_regs[60]);
|
|
OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_C1, rinfo->save_regs[61]);
|
|
OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_D0, rinfo->save_regs[62]);
|
|
OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_D1, rinfo->save_regs[63]);
|
|
OUTMC(rinfo, ixR300_MC_BIST_CNTL_3, rinfo->save_regs[64]);
|
|
OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_A0, rinfo->save_regs[65]);
|
|
OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_A1, rinfo->save_regs[66]);
|
|
OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_B0, rinfo->save_regs[67]);
|
|
OUTMC(rinfo, ixR300_MC_CHP_IO_CNTL_B1, rinfo->save_regs[68]);
|
|
OUTMC(rinfo, ixR300_MC_DEBUG_CNTL, rinfo->save_regs[69]);
|
|
OUTMC(rinfo, ixR300_MC_DLL_CNTL, rinfo->save_regs[70]);
|
|
OUTMC(rinfo, ixR300_MC_IMP_CNTL_0, rinfo->save_regs[71]);
|
|
OUTMC(rinfo, ixR300_MC_ELPIDA_CNTL, rinfo->save_regs[72]);
|
|
OUTMC(rinfo, ixR300_MC_READ_CNTL_CD, rinfo->save_regs[96]);
|
|
OUTREG(MC_IND_INDEX, 0);
|
|
}
|
|
|
|
static void radeon_reinitialize_M10(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 tmp, i;
|
|
|
|
/* Restore a bunch of registers first */
|
|
OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]);
|
|
OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]);
|
|
OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
|
|
OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]);
|
|
OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]);
|
|
OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
|
|
OUTREG(BUS_CNTL, rinfo->save_regs[36]);
|
|
OUTREG(BUS_CNTL1, rinfo->save_regs[14]);
|
|
OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]);
|
|
OUTREG(FCP_CNTL, rinfo->save_regs[38]);
|
|
OUTREG(RBBM_CNTL, rinfo->save_regs[39]);
|
|
OUTREG(DAC_CNTL, rinfo->save_regs[40]);
|
|
OUTREG(DAC_MACRO_CNTL, (INREG(DAC_MACRO_CNTL) & ~0x6) | 8);
|
|
OUTREG(DAC_MACRO_CNTL, (INREG(DAC_MACRO_CNTL) & ~0x6) | 8);
|
|
|
|
/* Hrm... */
|
|
OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) | DAC2_EXPAND_MODE);
|
|
|
|
/* Reset the PAD CTLR */
|
|
radeon_pm_reset_pad_ctlr_strength(rinfo);
|
|
|
|
/* Some PLLs are Read & written identically in the trace here...
|
|
* I suppose it's actually to switch them all off & reset,
|
|
* let's assume off is what we want. I'm just doing that for all major PLLs now.
|
|
*/
|
|
radeon_pm_all_ppls_off(rinfo);
|
|
|
|
/* Clear tiling, reset swappers */
|
|
INREG(SURFACE_CNTL);
|
|
OUTREG(SURFACE_CNTL, 0);
|
|
|
|
/* Some black magic with TV_DAC_CNTL, we should restore those from backups
|
|
* rather than hard coding...
|
|
*/
|
|
tmp = INREG(TV_DAC_CNTL) & ~TV_DAC_CNTL_BGADJ_MASK;
|
|
tmp |= 8 << TV_DAC_CNTL_BGADJ__SHIFT;
|
|
OUTREG(TV_DAC_CNTL, tmp);
|
|
|
|
tmp = INREG(TV_DAC_CNTL) & ~TV_DAC_CNTL_DACADJ_MASK;
|
|
tmp |= 7 << TV_DAC_CNTL_DACADJ__SHIFT;
|
|
OUTREG(TV_DAC_CNTL, tmp);
|
|
|
|
/* More registers restored */
|
|
OUTREG(AGP_CNTL, rinfo->save_regs[16]);
|
|
OUTREG(HOST_PATH_CNTL, rinfo->save_regs[41]);
|
|
OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]);
|
|
|
|
/* Hrmmm ... What is that ? */
|
|
tmp = rinfo->save_regs[1]
|
|
& ~(CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK |
|
|
CLK_PWRMGT_CNTL__MC_BUSY);
|
|
OUTPLL(pllCLK_PWRMGT_CNTL, tmp);
|
|
|
|
OUTREG(PAD_CTLR_MISC, rinfo->save_regs[56]);
|
|
OUTREG(FW_CNTL, rinfo->save_regs[57]);
|
|
OUTREG(HDP_DEBUG, rinfo->save_regs[96]);
|
|
OUTREG(PAMAC0_DLY_CNTL, rinfo->save_regs[54]);
|
|
OUTREG(PAMAC1_DLY_CNTL, rinfo->save_regs[55]);
|
|
OUTREG(PAMAC2_DLY_CNTL, rinfo->save_regs[79]);
|
|
|
|
/* Restore Memory Controller configuration */
|
|
radeon_pm_m10_reconfigure_mc(rinfo);
|
|
|
|
/* Make sure CRTC's dont touch memory */
|
|
OUTREG(CRTC_GEN_CNTL, INREG(CRTC_GEN_CNTL)
|
|
| CRTC_GEN_CNTL__CRTC_DISP_REQ_EN_B);
|
|
OUTREG(CRTC2_GEN_CNTL, INREG(CRTC2_GEN_CNTL)
|
|
| CRTC2_GEN_CNTL__CRTC2_DISP_REQ_EN_B);
|
|
mdelay(30);
|
|
|
|
/* Disable SDRAM refresh */
|
|
OUTREG(MEM_REFRESH_CNTL, INREG(MEM_REFRESH_CNTL)
|
|
| MEM_REFRESH_CNTL__MEM_REFRESH_DIS);
|
|
|
|
/* Restore XTALIN routing (CLK_PIN_CNTL) */
|
|
OUTPLL(pllCLK_PIN_CNTL, rinfo->save_regs[4]);
|
|
|
|
/* Switch MCLK, YCLK and SCLK PLLs to PCI source & force them ON */
|
|
tmp = rinfo->save_regs[2] & 0xff000000;
|
|
tmp |= MCLK_CNTL__FORCE_MCLKA |
|
|
MCLK_CNTL__FORCE_MCLKB |
|
|
MCLK_CNTL__FORCE_YCLKA |
|
|
MCLK_CNTL__FORCE_YCLKB |
|
|
MCLK_CNTL__FORCE_MC;
|
|
OUTPLL(pllMCLK_CNTL, tmp);
|
|
|
|
/* Force all clocks on in SCLK */
|
|
tmp = INPLL(pllSCLK_CNTL);
|
|
tmp |= SCLK_CNTL__FORCE_DISP2|
|
|
SCLK_CNTL__FORCE_CP|
|
|
SCLK_CNTL__FORCE_HDP|
|
|
SCLK_CNTL__FORCE_DISP1|
|
|
SCLK_CNTL__FORCE_TOP|
|
|
SCLK_CNTL__FORCE_E2|
|
|
SCLK_CNTL__FORCE_SE|
|
|
SCLK_CNTL__FORCE_IDCT|
|
|
SCLK_CNTL__FORCE_VIP|
|
|
SCLK_CNTL__FORCE_PB|
|
|
SCLK_CNTL__FORCE_TAM|
|
|
SCLK_CNTL__FORCE_TDM|
|
|
SCLK_CNTL__FORCE_RB|
|
|
SCLK_CNTL__FORCE_TV_SCLK|
|
|
SCLK_CNTL__FORCE_SUBPIC|
|
|
SCLK_CNTL__FORCE_OV0;
|
|
tmp |= SCLK_CNTL__CP_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__HDP_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__TV_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__E2_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__SE_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__IDCT_MAX_DYN_STOP_LAT|
|
|
SCLK_CNTL__VIP_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__RE_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__PB_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__TAM_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__TDM_MAX_DYN_STOP_LAT |
|
|
SCLK_CNTL__RB_MAX_DYN_STOP_LAT;
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
|
|
OUTPLL(pllVCLK_ECP_CNTL, 0);
|
|
OUTPLL(pllPIXCLKS_CNTL, 0);
|
|
OUTPLL(pllMCLK_MISC,
|
|
MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT |
|
|
MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT);
|
|
|
|
mdelay(5);
|
|
|
|
/* Restore the M_SPLL_REF_FB_DIV, MPLL_AUX_CNTL and SPLL_AUX_CNTL values */
|
|
OUTPLL(pllM_SPLL_REF_FB_DIV, rinfo->save_regs[77]);
|
|
OUTPLL(pllMPLL_AUX_CNTL, rinfo->save_regs[75]);
|
|
OUTPLL(pllSPLL_AUX_CNTL, rinfo->save_regs[76]);
|
|
|
|
/* Now restore the major PLLs settings, keeping them off & reset though */
|
|
OUTPLL(pllPPLL_CNTL, rinfo->save_regs[93] | 0x3);
|
|
OUTPLL(pllP2PLL_CNTL, rinfo->save_regs[8] | 0x3);
|
|
OUTPLL(pllMPLL_CNTL, rinfo->save_regs[73] | 0x03);
|
|
OUTPLL(pllSPLL_CNTL, rinfo->save_regs[74] | 0x03);
|
|
|
|
/* Restore MC DLL state and switch it off/reset too */
|
|
OUTMC(rinfo, ixR300_MC_DLL_CNTL, rinfo->save_regs[70]);
|
|
|
|
/* Switch MDLL off & reset */
|
|
OUTPLL(pllMDLL_RDCKA, rinfo->save_regs[98] | 0xff);
|
|
mdelay(5);
|
|
|
|
/* Setup some black magic bits in PLL_PWRMGT_CNTL. Hrm... we saved
|
|
* 0xa1100007... and MacOS writes 0xa1000007 ..
|
|
*/
|
|
OUTPLL(pllPLL_PWRMGT_CNTL, rinfo->save_regs[0]);
|
|
|
|
/* Restore more stuffs */
|
|
OUTPLL(pllHTOTAL_CNTL, 0);
|
|
OUTPLL(pllHTOTAL2_CNTL, 0);
|
|
|
|
/* More PLL initial configuration */
|
|
tmp = INPLL(pllSCLK_CNTL2); /* What for ? */
|
|
OUTPLL(pllSCLK_CNTL2, tmp);
|
|
|
|
tmp = INPLL(pllSCLK_MORE_CNTL);
|
|
tmp |= SCLK_MORE_CNTL__FORCE_DISPREGS | /* a guess */
|
|
SCLK_MORE_CNTL__FORCE_MC_GUI |
|
|
SCLK_MORE_CNTL__FORCE_MC_HOST;
|
|
OUTPLL(pllSCLK_MORE_CNTL, tmp);
|
|
|
|
/* Now we actually start MCLK and SCLK */
|
|
radeon_pm_start_mclk_sclk(rinfo);
|
|
|
|
/* Full reset sdrams, this also re-inits the MDLL */
|
|
radeon_pm_full_reset_sdram(rinfo);
|
|
|
|
/* Fill palettes */
|
|
OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) | 0x20);
|
|
for (i=0; i<256; i++)
|
|
OUTREG(PALETTE_30_DATA, 0x15555555);
|
|
OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) & ~20);
|
|
udelay(20);
|
|
for (i=0; i<256; i++)
|
|
OUTREG(PALETTE_30_DATA, 0x15555555);
|
|
|
|
OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) & ~0x20);
|
|
mdelay(3);
|
|
|
|
/* Restore TMDS */
|
|
OUTREG(FP_GEN_CNTL, rinfo->save_regs[82]);
|
|
OUTREG(FP2_GEN_CNTL, rinfo->save_regs[83]);
|
|
|
|
/* Set LVDS registers but keep interface & pll down */
|
|
OUTREG(LVDS_GEN_CNTL, rinfo->save_regs[11] &
|
|
~(LVDS_EN | LVDS_ON | LVDS_DIGON | LVDS_BLON | LVDS_BL_MOD_EN));
|
|
OUTREG(LVDS_PLL_CNTL, (rinfo->save_regs[12] & ~0xf0000) | 0x20000);
|
|
|
|
OUTREG(DISP_OUTPUT_CNTL, rinfo->save_regs[86]);
|
|
|
|
/* Restore GPIOPAD state */
|
|
OUTREG(GPIOPAD_A, rinfo->save_regs[19]);
|
|
OUTREG(GPIOPAD_EN, rinfo->save_regs[20]);
|
|
OUTREG(GPIOPAD_MASK, rinfo->save_regs[21]);
|
|
|
|
/* write some stuff to the framebuffer... */
|
|
for (i = 0; i < 0x8000; ++i)
|
|
writeb(0, rinfo->fb_base + i);
|
|
|
|
mdelay(40);
|
|
OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) | LVDS_DIGON | LVDS_ON);
|
|
mdelay(40);
|
|
|
|
/* Restore a few more things */
|
|
OUTREG(GRPH_BUFFER_CNTL, rinfo->save_regs[94]);
|
|
OUTREG(GRPH2_BUFFER_CNTL, rinfo->save_regs[95]);
|
|
|
|
/* Take care of spread spectrum & PPLLs now */
|
|
radeon_pm_m10_disable_spread_spectrum(rinfo);
|
|
radeon_pm_restore_pixel_pll(rinfo);
|
|
|
|
/* GRRRR... I can't figure out the proper LVDS power sequence, and the
|
|
* code I have for blank/unblank doesn't quite work on some laptop models
|
|
* it seems ... Hrm. What I have here works most of the time ...
|
|
*/
|
|
radeon_pm_m10_enable_lvds_spread_spectrum(rinfo);
|
|
}
|
|
|
|
static void radeon_pm_m9p_reconfigure_mc(struct radeonfb_info *rinfo)
|
|
{
|
|
OUTREG(MC_CNTL, rinfo->save_regs[46]);
|
|
OUTREG(MC_INIT_GFX_LAT_TIMER, rinfo->save_regs[47]);
|
|
OUTREG(MC_INIT_MISC_LAT_TIMER, rinfo->save_regs[48]);
|
|
OUTREG(MEM_SDRAM_MODE_REG,
|
|
rinfo->save_regs[35] & ~MEM_SDRAM_MODE_REG__MC_INIT_COMPLETE);
|
|
OUTREG(MC_TIMING_CNTL, rinfo->save_regs[49]);
|
|
OUTREG(MC_READ_CNTL_AB, rinfo->save_regs[50]);
|
|
OUTREG(MEM_REFRESH_CNTL, rinfo->save_regs[42]);
|
|
OUTREG(MC_IOPAD_CNTL, rinfo->save_regs[51]);
|
|
OUTREG(MC_DEBUG, rinfo->save_regs[53]);
|
|
OUTREG(MC_CHIP_IO_OE_CNTL_AB, rinfo->save_regs[52]);
|
|
|
|
OUTMC(rinfo, ixMC_IMP_CNTL, rinfo->save_regs[59] /*0x00f460d6*/);
|
|
OUTMC(rinfo, ixMC_CHP_IO_CNTL_A0, rinfo->save_regs[65] /*0xfecfa666*/);
|
|
OUTMC(rinfo, ixMC_CHP_IO_CNTL_A1, rinfo->save_regs[66] /*0x141555ff*/);
|
|
OUTMC(rinfo, ixMC_CHP_IO_CNTL_B0, rinfo->save_regs[67] /*0xfecfa666*/);
|
|
OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, rinfo->save_regs[68] /*0x141555ff*/);
|
|
OUTMC(rinfo, ixMC_IMP_CNTL_0, rinfo->save_regs[71] /*0x00009249*/);
|
|
OUTREG(MC_IND_INDEX, 0);
|
|
OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
|
|
|
|
mdelay(20);
|
|
}
|
|
|
|
static void radeon_reinitialize_M9P(struct radeonfb_info *rinfo)
|
|
{
|
|
u32 tmp, i;
|
|
|
|
/* Restore a bunch of registers first */
|
|
OUTREG(SURFACE_CNTL, rinfo->save_regs[29]);
|
|
OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]);
|
|
OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]);
|
|
OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
|
|
OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]);
|
|
OUTREG(OV0_BASE_ADDR, rinfo->save_regs[80]);
|
|
OUTREG(BUS_CNTL, rinfo->save_regs[36]);
|
|
OUTREG(BUS_CNTL1, rinfo->save_regs[14]);
|
|
OUTREG(MPP_TB_CONFIG, rinfo->save_regs[37]);
|
|
OUTREG(FCP_CNTL, rinfo->save_regs[38]);
|
|
OUTREG(RBBM_CNTL, rinfo->save_regs[39]);
|
|
|
|
OUTREG(DAC_CNTL, rinfo->save_regs[40]);
|
|
OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) | DAC2_EXPAND_MODE);
|
|
|
|
/* Reset the PAD CTLR */
|
|
radeon_pm_reset_pad_ctlr_strength(rinfo);
|
|
|
|
/* Some PLLs are Read & written identically in the trace here...
|
|
* I suppose it's actually to switch them all off & reset,
|
|
* let's assume off is what we want. I'm just doing that for all major PLLs now.
|
|
*/
|
|
radeon_pm_all_ppls_off(rinfo);
|
|
|
|
/* Clear tiling, reset swappers */
|
|
INREG(SURFACE_CNTL);
|
|
OUTREG(SURFACE_CNTL, 0);
|
|
|
|
/* Some black magic with TV_DAC_CNTL, we should restore those from backups
|
|
* rather than hard coding...
|
|
*/
|
|
tmp = INREG(TV_DAC_CNTL) & ~TV_DAC_CNTL_BGADJ_MASK;
|
|
tmp |= 6 << TV_DAC_CNTL_BGADJ__SHIFT;
|
|
OUTREG(TV_DAC_CNTL, tmp);
|
|
|
|
tmp = INREG(TV_DAC_CNTL) & ~TV_DAC_CNTL_DACADJ_MASK;
|
|
tmp |= 6 << TV_DAC_CNTL_DACADJ__SHIFT;
|
|
OUTREG(TV_DAC_CNTL, tmp);
|
|
|
|
OUTPLL(pllAGP_PLL_CNTL, rinfo->save_regs[78]);
|
|
|
|
OUTREG(PAMAC0_DLY_CNTL, rinfo->save_regs[54]);
|
|
OUTREG(PAMAC1_DLY_CNTL, rinfo->save_regs[55]);
|
|
OUTREG(PAMAC2_DLY_CNTL, rinfo->save_regs[79]);
|
|
|
|
OUTREG(AGP_CNTL, rinfo->save_regs[16]);
|
|
OUTREG(HOST_PATH_CNTL, rinfo->save_regs[41]); /* MacOS sets that to 0 !!! */
|
|
OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]);
|
|
|
|
tmp = rinfo->save_regs[1]
|
|
& ~(CLK_PWRMGT_CNTL__ACTIVE_HILO_LAT_MASK |
|
|
CLK_PWRMGT_CNTL__MC_BUSY);
|
|
OUTPLL(pllCLK_PWRMGT_CNTL, tmp);
|
|
|
|
OUTREG(FW_CNTL, rinfo->save_regs[57]);
|
|
|
|
/* Disable SDRAM refresh */
|
|
OUTREG(MEM_REFRESH_CNTL, INREG(MEM_REFRESH_CNTL)
|
|
| MEM_REFRESH_CNTL__MEM_REFRESH_DIS);
|
|
|
|
/* Restore XTALIN routing (CLK_PIN_CNTL) */
|
|
OUTPLL(pllCLK_PIN_CNTL, rinfo->save_regs[4]);
|
|
|
|
/* Force MCLK to be PCI sourced and forced ON */
|
|
tmp = rinfo->save_regs[2] & 0xff000000;
|
|
tmp |= MCLK_CNTL__FORCE_MCLKA |
|
|
MCLK_CNTL__FORCE_MCLKB |
|
|
MCLK_CNTL__FORCE_YCLKA |
|
|
MCLK_CNTL__FORCE_YCLKB |
|
|
MCLK_CNTL__FORCE_MC |
|
|
MCLK_CNTL__FORCE_AIC;
|
|
OUTPLL(pllMCLK_CNTL, tmp);
|
|
|
|
/* Force SCLK to be PCI sourced with a bunch forced */
|
|
tmp = 0 |
|
|
SCLK_CNTL__FORCE_DISP2|
|
|
SCLK_CNTL__FORCE_CP|
|
|
SCLK_CNTL__FORCE_HDP|
|
|
SCLK_CNTL__FORCE_DISP1|
|
|
SCLK_CNTL__FORCE_TOP|
|
|
SCLK_CNTL__FORCE_E2|
|
|
SCLK_CNTL__FORCE_SE|
|
|
SCLK_CNTL__FORCE_IDCT|
|
|
SCLK_CNTL__FORCE_VIP|
|
|
SCLK_CNTL__FORCE_RE|
|
|
SCLK_CNTL__FORCE_PB|
|
|
SCLK_CNTL__FORCE_TAM|
|
|
SCLK_CNTL__FORCE_TDM|
|
|
SCLK_CNTL__FORCE_RB;
|
|
OUTPLL(pllSCLK_CNTL, tmp);
|
|
|
|
/* Clear VCLK_ECP_CNTL & PIXCLKS_CNTL */
|
|
OUTPLL(pllVCLK_ECP_CNTL, 0);
|
|
OUTPLL(pllPIXCLKS_CNTL, 0);
|
|
|
|
/* Setup MCLK_MISC, non dynamic mode */
|
|
OUTPLL(pllMCLK_MISC,
|
|
MCLK_MISC__MC_MCLK_MAX_DYN_STOP_LAT |
|
|
MCLK_MISC__IO_MCLK_MAX_DYN_STOP_LAT);
|
|
|
|
mdelay(5);
|
|
|
|
/* Set back the default clock dividers */
|
|
OUTPLL(pllM_SPLL_REF_FB_DIV, rinfo->save_regs[77]);
|
|
OUTPLL(pllMPLL_AUX_CNTL, rinfo->save_regs[75]);
|
|
OUTPLL(pllSPLL_AUX_CNTL, rinfo->save_regs[76]);
|
|
|
|
/* PPLL and P2PLL default values & off */
|
|
OUTPLL(pllPPLL_CNTL, rinfo->save_regs[93] | 0x3);
|
|
OUTPLL(pllP2PLL_CNTL, rinfo->save_regs[8] | 0x3);
|
|
|
|
/* S and M PLLs are reset & off, configure them */
|
|
OUTPLL(pllMPLL_CNTL, rinfo->save_regs[73] | 0x03);
|
|
OUTPLL(pllSPLL_CNTL, rinfo->save_regs[74] | 0x03);
|
|
|
|
/* Default values for MDLL ... fixme */
|
|
OUTPLL(pllMDLL_CKO, 0x9c009c);
|
|
OUTPLL(pllMDLL_RDCKA, 0x08830883);
|
|
OUTPLL(pllMDLL_RDCKB, 0x08830883);
|
|
mdelay(5);
|
|
|
|
/* Restore PLL_PWRMGT_CNTL */ // XXXX
|
|
tmp = rinfo->save_regs[0];
|
|
tmp &= ~PLL_PWRMGT_CNTL_SU_SCLK_USE_BCLK;
|
|
tmp |= PLL_PWRMGT_CNTL_SU_MCLK_USE_BCLK;
|
|
OUTPLL(PLL_PWRMGT_CNTL, tmp);
|
|
|
|
/* Clear HTOTAL_CNTL & HTOTAL2_CNTL */
|
|
OUTPLL(pllHTOTAL_CNTL, 0);
|
|
OUTPLL(pllHTOTAL2_CNTL, 0);
|
|
|
|
/* All outputs off */
|
|
OUTREG(CRTC_GEN_CNTL, 0x04000000);
|
|
OUTREG(CRTC2_GEN_CNTL, 0x04000000);
|
|
OUTREG(FP_GEN_CNTL, 0x00004008);
|
|
OUTREG(FP2_GEN_CNTL, 0x00000008);
|
|
OUTREG(LVDS_GEN_CNTL, 0x08000008);
|
|
|
|
/* Restore Memory Controller configuration */
|
|
radeon_pm_m9p_reconfigure_mc(rinfo);
|
|
|
|
/* Now we actually start MCLK and SCLK */
|
|
radeon_pm_start_mclk_sclk(rinfo);
|
|
|
|
/* Full reset sdrams, this also re-inits the MDLL */
|
|
radeon_pm_full_reset_sdram(rinfo);
|
|
|
|
/* Fill palettes */
|
|
OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) | 0x20);
|
|
for (i=0; i<256; i++)
|
|
OUTREG(PALETTE_30_DATA, 0x15555555);
|
|
OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) & ~20);
|
|
udelay(20);
|
|
for (i=0; i<256; i++)
|
|
OUTREG(PALETTE_30_DATA, 0x15555555);
|
|
|
|
OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) & ~0x20);
|
|
mdelay(3);
|
|
|
|
/* Restore TV stuff, make sure TV DAC is down */
|
|
OUTREG(TV_MASTER_CNTL, rinfo->save_regs[88]);
|
|
OUTREG(TV_DAC_CNTL, rinfo->save_regs[13] | 0x07000000);
|
|
|
|
/* Restore GPIOS. MacOS does some magic here with one of the GPIO bits,
|
|
* possibly related to the weird PLL related workarounds and to the
|
|
* fact that CLK_PIN_CNTL is tweaked in ways I don't fully understand,
|
|
* but we keep things the simple way here
|
|
*/
|
|
OUTREG(GPIOPAD_A, rinfo->save_regs[19]);
|
|
OUTREG(GPIOPAD_EN, rinfo->save_regs[20]);
|
|
OUTREG(GPIOPAD_MASK, rinfo->save_regs[21]);
|
|
|
|
/* Now do things with SCLK_MORE_CNTL. Force bits are already set, copy
|
|
* high bits from backup
|
|
*/
|
|
tmp = INPLL(pllSCLK_MORE_CNTL) & 0x0000ffff;
|
|
tmp |= rinfo->save_regs[34] & 0xffff0000;
|
|
tmp |= SCLK_MORE_CNTL__FORCE_DISPREGS;
|
|
OUTPLL(pllSCLK_MORE_CNTL, tmp);
|
|
|
|
tmp = INPLL(pllSCLK_MORE_CNTL) & 0x0000ffff;
|
|
tmp |= rinfo->save_regs[34] & 0xffff0000;
|
|
tmp |= SCLK_MORE_CNTL__FORCE_DISPREGS;
|
|
OUTPLL(pllSCLK_MORE_CNTL, tmp);
|
|
|
|
OUTREG(LVDS_GEN_CNTL, rinfo->save_regs[11] &
|
|
~(LVDS_EN | LVDS_ON | LVDS_DIGON | LVDS_BLON | LVDS_BL_MOD_EN));
|
|
OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) | LVDS_BLON);
|
|
OUTREG(LVDS_PLL_CNTL, (rinfo->save_regs[12] & ~0xf0000) | 0x20000);
|
|
mdelay(20);
|
|
|
|
/* write some stuff to the framebuffer... */
|
|
for (i = 0; i < 0x8000; ++i)
|
|
writeb(0, rinfo->fb_base + i);
|
|
|
|
OUTREG(0x2ec, 0x6332a020);
|
|
OUTPLL(pllSSPLL_REF_DIV, rinfo->save_regs[44] /*0x3f */);
|
|
OUTPLL(pllSSPLL_DIV_0, rinfo->save_regs[45] /*0x000081bb */);
|
|
tmp = INPLL(pllSSPLL_CNTL);
|
|
tmp &= ~2;
|
|
OUTPLL(pllSSPLL_CNTL, tmp);
|
|
mdelay(6);
|
|
tmp &= ~1;
|
|
OUTPLL(pllSSPLL_CNTL, tmp);
|
|
mdelay(5);
|
|
tmp |= 3;
|
|
OUTPLL(pllSSPLL_CNTL, tmp);
|
|
mdelay(5);
|
|
|
|
OUTPLL(pllSS_INT_CNTL, rinfo->save_regs[90] & ~3);/*0x0020300c*/
|
|
OUTREG(0x2ec, 0x6332a3f0);
|
|
mdelay(17);
|
|
|
|
OUTPLL(pllPPLL_REF_DIV, rinfo->pll.ref_div);;
|
|
OUTPLL(pllPPLL_DIV_0, rinfo->save_regs[92]);
|
|
|
|
mdelay(40);
|
|
OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) | LVDS_DIGON | LVDS_ON);
|
|
mdelay(40);
|
|
|
|
/* Restore a few more things */
|
|
OUTREG(GRPH_BUFFER_CNTL, rinfo->save_regs[94]);
|
|
OUTREG(GRPH2_BUFFER_CNTL, rinfo->save_regs[95]);
|
|
|
|
/* Restore PPLL, spread spectrum & LVDS */
|
|
radeon_pm_m10_disable_spread_spectrum(rinfo);
|
|
radeon_pm_restore_pixel_pll(rinfo);
|
|
radeon_pm_m10_enable_lvds_spread_spectrum(rinfo);
|
|
}
|
|
|
|
#if 0 /* Not ready yet */
|
|
static void radeon_reinitialize_QW(struct radeonfb_info *rinfo)
|
|
{
|
|
int i;
|
|
u32 tmp, tmp2;
|
|
u32 cko, cka, ckb;
|
|
u32 cgc, cec, c2gc;
|
|
|
|
OUTREG(MC_AGP_LOCATION, rinfo->save_regs[32]);
|
|
OUTREG(DISPLAY_BASE_ADDR, rinfo->save_regs[31]);
|
|
OUTREG(CRTC2_DISPLAY_BASE_ADDR, rinfo->save_regs[33]);
|
|
OUTREG(MC_FB_LOCATION, rinfo->save_regs[30]);
|
|
OUTREG(BUS_CNTL, rinfo->save_regs[36]);
|
|
OUTREG(RBBM_CNTL, rinfo->save_regs[39]);
|
|
|
|
INREG(PAD_CTLR_STRENGTH);
|
|
OUTREG(PAD_CTLR_STRENGTH, INREG(PAD_CTLR_STRENGTH) & ~0x10000);
|
|
for (i = 0; i < 65; ++i) {
|
|
mdelay(1);
|
|
INREG(PAD_CTLR_STRENGTH);
|
|
}
|
|
|
|
OUTREG(DISP_TEST_DEBUG_CNTL, INREG(DISP_TEST_DEBUG_CNTL) | 0x10000000);
|
|
OUTREG(OV0_FLAG_CNTRL, INREG(OV0_FLAG_CNTRL) | 0x100);
|
|
OUTREG(CRTC_GEN_CNTL, INREG(CRTC_GEN_CNTL));
|
|
OUTREG(DAC_CNTL, 0xff00410a);
|
|
OUTREG(CRTC2_GEN_CNTL, INREG(CRTC2_GEN_CNTL));
|
|
OUTREG(DAC_CNTL2, INREG(DAC_CNTL2) | 0x4000);
|
|
|
|
OUTREG(SURFACE_CNTL, rinfo->save_regs[29]);
|
|
OUTREG(AGP_CNTL, rinfo->save_regs[16]);
|
|
OUTREG(HOST_PATH_CNTL, rinfo->save_regs[41]);
|
|
OUTREG(DISP_MISC_CNTL, rinfo->save_regs[9]);
|
|
|
|
OUTMC(rinfo, ixMC_CHP_IO_CNTL_A0, 0xf7bb4433);
|
|
OUTREG(MC_IND_INDEX, 0);
|
|
OUTMC(rinfo, ixMC_CHP_IO_CNTL_B0, 0xf7bb4433);
|
|
OUTREG(MC_IND_INDEX, 0);
|
|
|
|
OUTREG(CRTC_MORE_CNTL, INREG(CRTC_MORE_CNTL));
|
|
|
|
tmp = INPLL(pllVCLK_ECP_CNTL);
|
|
OUTPLL(pllVCLK_ECP_CNTL, tmp);
|
|
tmp = INPLL(pllPIXCLKS_CNTL);
|
|
OUTPLL(pllPIXCLKS_CNTL, tmp);
|
|
|
|
OUTPLL(MCLK_CNTL, 0xaa3f0000);
|
|
OUTPLL(SCLK_CNTL, 0xffff0000);
|
|
OUTPLL(pllMPLL_AUX_CNTL, 6);
|
|
OUTPLL(pllSPLL_AUX_CNTL, 1);
|
|
OUTPLL(MDLL_CKO, 0x9f009f);
|
|
OUTPLL(MDLL_RDCKA, 0x830083);
|
|
OUTPLL(pllMDLL_RDCKB, 0x830083);
|
|
OUTPLL(PPLL_CNTL, 0xa433);
|
|
OUTPLL(P2PLL_CNTL, 0xa433);
|
|
OUTPLL(MPLL_CNTL, 0x0400a403);
|
|
OUTPLL(SPLL_CNTL, 0x0400a433);
|
|
|
|
tmp = INPLL(M_SPLL_REF_FB_DIV);
|
|
OUTPLL(M_SPLL_REF_FB_DIV, tmp);
|
|
tmp = INPLL(M_SPLL_REF_FB_DIV);
|
|
OUTPLL(M_SPLL_REF_FB_DIV, tmp | 0xc);
|
|
INPLL(M_SPLL_REF_FB_DIV);
|
|
|
|
tmp = INPLL(MPLL_CNTL);
|
|
OUTREG8(CLOCK_CNTL_INDEX, MPLL_CNTL + PLL_WR_EN);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
OUTREG8(CLOCK_CNTL_DATA + 1, (tmp >> 8) & 0xff);
|
|
radeon_pll_errata_after_data(rinfo);
|
|
|
|
tmp = INPLL(M_SPLL_REF_FB_DIV);
|
|
OUTPLL(M_SPLL_REF_FB_DIV, tmp | 0x5900);
|
|
|
|
tmp = INPLL(MPLL_CNTL);
|
|
OUTPLL(MPLL_CNTL, tmp & ~0x2);
|
|
mdelay(1);
|
|
tmp = INPLL(MPLL_CNTL);
|
|
OUTPLL(MPLL_CNTL, tmp & ~0x1);
|
|
mdelay(10);
|
|
|
|
OUTPLL(MCLK_CNTL, 0xaa3f1212);
|
|
mdelay(1);
|
|
|
|
INPLL(M_SPLL_REF_FB_DIV);
|
|
INPLL(MCLK_CNTL);
|
|
INPLL(M_SPLL_REF_FB_DIV);
|
|
|
|
tmp = INPLL(SPLL_CNTL);
|
|
OUTREG8(CLOCK_CNTL_INDEX, SPLL_CNTL + PLL_WR_EN);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
OUTREG8(CLOCK_CNTL_DATA + 1, (tmp >> 8) & 0xff);
|
|
radeon_pll_errata_after_data(rinfo);
|
|
|
|
tmp = INPLL(M_SPLL_REF_FB_DIV);
|
|
OUTPLL(M_SPLL_REF_FB_DIV, tmp | 0x780000);
|
|
|
|
tmp = INPLL(SPLL_CNTL);
|
|
OUTPLL(SPLL_CNTL, tmp & ~0x1);
|
|
mdelay(1);
|
|
tmp = INPLL(SPLL_CNTL);
|
|
OUTPLL(SPLL_CNTL, tmp & ~0x2);
|
|
mdelay(10);
|
|
|
|
tmp = INPLL(SCLK_CNTL);
|
|
OUTPLL(SCLK_CNTL, tmp | 2);
|
|
mdelay(1);
|
|
|
|
cko = INPLL(pllMDLL_CKO);
|
|
cka = INPLL(pllMDLL_RDCKA);
|
|
ckb = INPLL(pllMDLL_RDCKB);
|
|
|
|
cko &= ~(MDLL_CKO__MCKOA_SLEEP | MDLL_CKO__MCKOB_SLEEP);
|
|
OUTPLL(pllMDLL_CKO, cko);
|
|
mdelay(1);
|
|
cko &= ~(MDLL_CKO__MCKOA_RESET | MDLL_CKO__MCKOB_RESET);
|
|
OUTPLL(pllMDLL_CKO, cko);
|
|
mdelay(5);
|
|
|
|
cka &= ~(MDLL_RDCKA__MRDCKA0_SLEEP | MDLL_RDCKA__MRDCKA1_SLEEP);
|
|
OUTPLL(pllMDLL_RDCKA, cka);
|
|
mdelay(1);
|
|
cka &= ~(MDLL_RDCKA__MRDCKA0_RESET | MDLL_RDCKA__MRDCKA1_RESET);
|
|
OUTPLL(pllMDLL_RDCKA, cka);
|
|
mdelay(5);
|
|
|
|
ckb &= ~(MDLL_RDCKB__MRDCKB0_SLEEP | MDLL_RDCKB__MRDCKB1_SLEEP);
|
|
OUTPLL(pllMDLL_RDCKB, ckb);
|
|
mdelay(1);
|
|
ckb &= ~(MDLL_RDCKB__MRDCKB0_RESET | MDLL_RDCKB__MRDCKB1_RESET);
|
|
OUTPLL(pllMDLL_RDCKB, ckb);
|
|
mdelay(5);
|
|
|
|
OUTMC(rinfo, ixMC_CHP_IO_CNTL_A1, 0x151550ff);
|
|
OUTREG(MC_IND_INDEX, 0);
|
|
OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, 0x151550ff);
|
|
OUTREG(MC_IND_INDEX, 0);
|
|
mdelay(1);
|
|
OUTMC(rinfo, ixMC_CHP_IO_CNTL_A1, 0x141550ff);
|
|
OUTREG(MC_IND_INDEX, 0);
|
|
OUTMC(rinfo, ixMC_CHP_IO_CNTL_B1, 0x141550ff);
|
|
OUTREG(MC_IND_INDEX, 0);
|
|
mdelay(1);
|
|
|
|
OUTPLL(pllHTOTAL_CNTL, 0);
|
|
OUTPLL(pllHTOTAL2_CNTL, 0);
|
|
|
|
OUTREG(MEM_CNTL, 0x29002901);
|
|
OUTREG(MEM_SDRAM_MODE_REG, 0x45320032); /* XXX use save_regs[35]? */
|
|
OUTREG(EXT_MEM_CNTL, 0x1a394333);
|
|
OUTREG(MEM_IO_CNTL_A1, 0x0aac0aac);
|
|
OUTREG(MEM_INIT_LATENCY_TIMER, 0x34444444);
|
|
OUTREG(MEM_REFRESH_CNTL, 0x1f1f7218); /* XXX or save_regs[42]? */
|
|
OUTREG(MC_DEBUG, 0);
|
|
OUTREG(MEM_IO_OE_CNTL, 0x04300430);
|
|
|
|
OUTMC(rinfo, ixMC_IMP_CNTL, 0x00f460d6);
|
|
OUTREG(MC_IND_INDEX, 0);
|
|
OUTMC(rinfo, ixMC_IMP_CNTL_0, 0x00009249);
|
|
OUTREG(MC_IND_INDEX, 0);
|
|
|
|
OUTREG(CONFIG_MEMSIZE, rinfo->video_ram);
|
|
|
|
radeon_pm_full_reset_sdram(rinfo);
|
|
|
|
INREG(FP_GEN_CNTL);
|
|
OUTREG(TMDS_CNTL, 0x01000000); /* XXX ? */
|
|
tmp = INREG(FP_GEN_CNTL);
|
|
tmp |= FP_CRTC_DONT_SHADOW_HEND | FP_CRTC_DONT_SHADOW_VPAR | 0x200;
|
|
OUTREG(FP_GEN_CNTL, tmp);
|
|
|
|
tmp = INREG(DISP_OUTPUT_CNTL);
|
|
tmp &= ~0x400;
|
|
OUTREG(DISP_OUTPUT_CNTL, tmp);
|
|
|
|
OUTPLL(CLK_PIN_CNTL, rinfo->save_regs[4]);
|
|
OUTPLL(CLK_PWRMGT_CNTL, rinfo->save_regs[1]);
|
|
OUTPLL(PLL_PWRMGT_CNTL, rinfo->save_regs[0]);
|
|
|
|
tmp = INPLL(MCLK_MISC);
|
|
tmp |= MCLK_MISC__MC_MCLK_DYN_ENABLE | MCLK_MISC__IO_MCLK_DYN_ENABLE;
|
|
OUTPLL(MCLK_MISC, tmp);
|
|
|
|
tmp = INPLL(SCLK_CNTL);
|
|
OUTPLL(SCLK_CNTL, tmp);
|
|
|
|
OUTREG(CRTC_MORE_CNTL, 0);
|
|
OUTREG8(CRTC_GEN_CNTL+1, 6);
|
|
OUTREG8(CRTC_GEN_CNTL+3, 1);
|
|
OUTREG(CRTC_PITCH, 32);
|
|
|
|
tmp = INPLL(VCLK_ECP_CNTL);
|
|
OUTPLL(VCLK_ECP_CNTL, tmp);
|
|
|
|
tmp = INPLL(PPLL_CNTL);
|
|
OUTPLL(PPLL_CNTL, tmp);
|
|
|
|
/* palette stuff and BIOS_1_SCRATCH... */
|
|
|
|
tmp = INREG(FP_GEN_CNTL);
|
|
tmp2 = INREG(TMDS_TRANSMITTER_CNTL);
|
|
tmp |= 2;
|
|
OUTREG(FP_GEN_CNTL, tmp);
|
|
mdelay(5);
|
|
OUTREG(FP_GEN_CNTL, tmp);
|
|
mdelay(5);
|
|
OUTREG(TMDS_TRANSMITTER_CNTL, tmp2);
|
|
OUTREG(CRTC_MORE_CNTL, 0);
|
|
mdelay(20);
|
|
|
|
tmp = INREG(CRTC_MORE_CNTL);
|
|
OUTREG(CRTC_MORE_CNTL, tmp);
|
|
|
|
cgc = INREG(CRTC_GEN_CNTL);
|
|
cec = INREG(CRTC_EXT_CNTL);
|
|
c2gc = INREG(CRTC2_GEN_CNTL);
|
|
|
|
OUTREG(CRTC_H_SYNC_STRT_WID, 0x008e0580);
|
|
OUTREG(CRTC_H_TOTAL_DISP, 0x009f00d2);
|
|
OUTREG8(CLOCK_CNTL_INDEX, HTOTAL_CNTL + PLL_WR_EN);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
OUTREG8(CLOCK_CNTL_DATA, 0);
|
|
radeon_pll_errata_after_data(rinfo);
|
|
OUTREG(CRTC_V_SYNC_STRT_WID, 0x00830403);
|
|
OUTREG(CRTC_V_TOTAL_DISP, 0x03ff0429);
|
|
OUTREG(FP_CRTC_H_TOTAL_DISP, 0x009f0033);
|
|
OUTREG(FP_H_SYNC_STRT_WID, 0x008e0080);
|
|
OUTREG(CRT_CRTC_H_SYNC_STRT_WID, 0x008e0080);
|
|
OUTREG(FP_CRTC_V_TOTAL_DISP, 0x03ff002a);
|
|
OUTREG(FP_V_SYNC_STRT_WID, 0x00830004);
|
|
OUTREG(CRT_CRTC_V_SYNC_STRT_WID, 0x00830004);
|
|
OUTREG(FP_HORZ_VERT_ACTIVE, 0x009f03ff);
|
|
OUTREG(FP_HORZ_STRETCH, 0);
|
|
OUTREG(FP_VERT_STRETCH, 0);
|
|
OUTREG(OVR_CLR, 0);
|
|
OUTREG(OVR_WID_LEFT_RIGHT, 0);
|
|
OUTREG(OVR_WID_TOP_BOTTOM, 0);
|
|
|
|
tmp = INPLL(PPLL_REF_DIV);
|
|
tmp = (tmp & ~PPLL_REF_DIV_MASK) | rinfo->pll.ref_div;
|
|
OUTPLL(PPLL_REF_DIV, tmp);
|
|
INPLL(PPLL_REF_DIV);
|
|
|
|
OUTREG8(CLOCK_CNTL_INDEX, PPLL_CNTL + PLL_WR_EN);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
OUTREG8(CLOCK_CNTL_DATA + 1, 0xbc);
|
|
radeon_pll_errata_after_data(rinfo);
|
|
|
|
tmp = INREG(CLOCK_CNTL_INDEX);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
OUTREG(CLOCK_CNTL_INDEX, tmp & 0xff);
|
|
radeon_pll_errata_after_index(rinfo);
|
|
radeon_pll_errata_after_data(rinfo);
|
|
|
|
OUTPLL(PPLL_DIV_0, 0x48090);
|
|
|
|
tmp = INPLL(PPLL_CNTL);
|
|
OUTPLL(PPLL_CNTL, tmp & ~0x2);
|
|
mdelay(1);
|
|
tmp = INPLL(PPLL_CNTL);
|
|
OUTPLL(PPLL_CNTL, tmp & ~0x1);
|
|
mdelay(10);
|
|
|
|
tmp = INPLL(VCLK_ECP_CNTL);
|
|
OUTPLL(VCLK_ECP_CNTL, tmp | 3);
|
|
mdelay(1);
|
|
|
|
tmp = INPLL(VCLK_ECP_CNTL);
|
|
OUTPLL(VCLK_ECP_CNTL, tmp);
|
|
|
|
c2gc |= CRTC2_DISP_REQ_EN_B;
|
|
OUTREG(CRTC2_GEN_CNTL, c2gc);
|
|
cgc |= CRTC_EN;
|
|
OUTREG(CRTC_GEN_CNTL, cgc);
|
|
OUTREG(CRTC_EXT_CNTL, cec);
|
|
OUTREG(CRTC_PITCH, 0xa0);
|
|
OUTREG(CRTC_OFFSET, 0);
|
|
OUTREG(CRTC_OFFSET_CNTL, 0);
|
|
|
|
OUTREG(GRPH_BUFFER_CNTL, 0x20117c7c);
|
|
OUTREG(GRPH2_BUFFER_CNTL, 0x00205c5c);
|
|
|
|
tmp2 = INREG(FP_GEN_CNTL);
|
|
tmp = INREG(TMDS_TRANSMITTER_CNTL);
|
|
OUTREG(0x2a8, 0x0000061b);
|
|
tmp |= TMDS_PLL_EN;
|
|
OUTREG(TMDS_TRANSMITTER_CNTL, tmp);
|
|
mdelay(1);
|
|
tmp &= ~TMDS_PLLRST;
|
|
OUTREG(TMDS_TRANSMITTER_CNTL, tmp);
|
|
tmp2 &= ~2;
|
|
tmp2 |= FP_TMDS_EN;
|
|
OUTREG(FP_GEN_CNTL, tmp2);
|
|
mdelay(5);
|
|
tmp2 |= FP_FPON;
|
|
OUTREG(FP_GEN_CNTL, tmp2);
|
|
|
|
OUTREG(CUR_HORZ_VERT_OFF, CUR_LOCK | 1);
|
|
cgc = INREG(CRTC_GEN_CNTL);
|
|
OUTREG(CUR_HORZ_VERT_POSN, 0xbfff0fff);
|
|
cgc |= 0x10000;
|
|
OUTREG(CUR_OFFSET, 0);
|
|
}
|
|
#endif /* 0 */
|
|
|
|
#endif /* CONFIG_PPC_OF */
|
|
|
|
static void radeon_set_suspend(struct radeonfb_info *rinfo, int suspend)
|
|
{
|
|
u16 pwr_cmd;
|
|
u32 tmp;
|
|
int i;
|
|
|
|
if (!rinfo->pm_reg)
|
|
return;
|
|
|
|
/* Set the chip into appropriate suspend mode (we use D2,
|
|
* D3 would require a compete re-initialization of the chip,
|
|
* including PCI config registers, clocks, AGP conf, ...)
|
|
*/
|
|
if (suspend) {
|
|
printk(KERN_DEBUG "radeonfb (%s): switching to D2 state...\n",
|
|
pci_name(rinfo->pdev));
|
|
|
|
/* Disable dynamic power management of clocks for the
|
|
* duration of the suspend/resume process
|
|
*/
|
|
radeon_pm_disable_dynamic_mode(rinfo);
|
|
|
|
/* Save some registers */
|
|
radeon_pm_save_regs(rinfo, 0);
|
|
|
|
/* Prepare mobility chips for suspend.
|
|
*/
|
|
if (rinfo->is_mobility) {
|
|
/* Program V2CLK */
|
|
radeon_pm_program_v2clk(rinfo);
|
|
|
|
/* Disable IO PADs */
|
|
radeon_pm_disable_iopad(rinfo);
|
|
|
|
/* Set low current */
|
|
radeon_pm_low_current(rinfo);
|
|
|
|
/* Prepare chip for power management */
|
|
radeon_pm_setup_for_suspend(rinfo);
|
|
|
|
if (rinfo->family <= CHIP_FAMILY_RV280) {
|
|
/* Reset the MDLL */
|
|
/* because both INPLL and OUTPLL take the same
|
|
* lock, that's why. */
|
|
tmp = INPLL( pllMDLL_CKO) | MDLL_CKO__MCKOA_RESET
|
|
| MDLL_CKO__MCKOB_RESET;
|
|
OUTPLL( pllMDLL_CKO, tmp );
|
|
}
|
|
}
|
|
|
|
for (i = 0; i < 64; ++i)
|
|
pci_read_config_dword(rinfo->pdev, i * 4,
|
|
&rinfo->cfg_save[i]);
|
|
|
|
/* Switch PCI power managment to D2. */
|
|
pci_disable_device(rinfo->pdev);
|
|
for (;;) {
|
|
pci_read_config_word(
|
|
rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
|
|
&pwr_cmd);
|
|
if (pwr_cmd & 2)
|
|
break;
|
|
pci_write_config_word(
|
|
rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL,
|
|
(pwr_cmd & ~PCI_PM_CTRL_STATE_MASK) | 2);
|
|
mdelay(500);
|
|
}
|
|
} else {
|
|
printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
|
|
pci_name(rinfo->pdev));
|
|
|
|
/* Switch back PCI powermanagment to D0 */
|
|
mdelay(200);
|
|
pci_write_config_word(rinfo->pdev, rinfo->pm_reg+PCI_PM_CTRL, 0);
|
|
mdelay(500);
|
|
|
|
if (rinfo->family <= CHIP_FAMILY_RV250) {
|
|
/* Reset the SDRAM controller */
|
|
radeon_pm_full_reset_sdram(rinfo);
|
|
|
|
/* Restore some registers */
|
|
radeon_pm_restore_regs(rinfo);
|
|
} else {
|
|
/* Restore registers first */
|
|
radeon_pm_restore_regs(rinfo);
|
|
/* init sdram controller */
|
|
radeon_pm_full_reset_sdram(rinfo);
|
|
}
|
|
}
|
|
}
|
|
|
|
static int radeon_restore_pci_cfg(struct radeonfb_info *rinfo)
|
|
{
|
|
int i;
|
|
static u32 radeon_cfg_after_resume[64];
|
|
|
|
for (i = 0; i < 64; ++i)
|
|
pci_read_config_dword(rinfo->pdev, i * 4,
|
|
&radeon_cfg_after_resume[i]);
|
|
|
|
if (radeon_cfg_after_resume[PCI_BASE_ADDRESS_0/4]
|
|
== rinfo->cfg_save[PCI_BASE_ADDRESS_0/4])
|
|
return 0; /* assume everything is ok */
|
|
|
|
for (i = PCI_BASE_ADDRESS_0/4; i < 64; ++i) {
|
|
if (radeon_cfg_after_resume[i] != rinfo->cfg_save[i])
|
|
pci_write_config_dword(rinfo->pdev, i * 4,
|
|
rinfo->cfg_save[i]);
|
|
}
|
|
pci_write_config_word(rinfo->pdev, PCI_CACHE_LINE_SIZE,
|
|
rinfo->cfg_save[PCI_CACHE_LINE_SIZE/4]);
|
|
pci_write_config_word(rinfo->pdev, PCI_COMMAND,
|
|
rinfo->cfg_save[PCI_COMMAND/4]);
|
|
return 1;
|
|
}
|
|
|
|
|
|
int radeonfb_pci_suspend(struct pci_dev *pdev, pm_message_t state)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(pdev);
|
|
struct radeonfb_info *rinfo = info->par;
|
|
int i;
|
|
|
|
if (state == pdev->dev.power.power_state)
|
|
return 0;
|
|
|
|
printk(KERN_DEBUG "radeonfb (%s): suspending to state: %d...\n",
|
|
pci_name(pdev), state);
|
|
|
|
/* For suspend-to-disk, we cheat here. We don't suspend anything and
|
|
* let fbcon continue drawing until we are all set. That shouldn't
|
|
* really cause any problem at this point, provided that the wakeup
|
|
* code knows that any state in memory may not match the HW
|
|
*/
|
|
if (state != PM_SUSPEND_MEM)
|
|
goto done;
|
|
|
|
acquire_console_sem();
|
|
|
|
fb_set_suspend(info, 1);
|
|
|
|
if (!(info->flags & FBINFO_HWACCEL_DISABLED)) {
|
|
/* Make sure engine is reset */
|
|
radeon_engine_idle();
|
|
radeonfb_engine_reset(rinfo);
|
|
radeon_engine_idle();
|
|
}
|
|
|
|
/* Blank display and LCD */
|
|
radeon_screen_blank(rinfo, FB_BLANK_POWERDOWN, 1);
|
|
|
|
/* Sleep */
|
|
rinfo->asleep = 1;
|
|
rinfo->lock_blank = 1;
|
|
del_timer_sync(&rinfo->lvds_timer);
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
/* On powermac, we have hooks to properly suspend/resume AGP now,
|
|
* use them here. We'll ultimately need some generic support here,
|
|
* but the generic code isn't quite ready for that yet
|
|
*/
|
|
pmac_suspend_agp_for_card(pdev);
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
/* If we support wakeup from poweroff, we save all regs we can including cfg
|
|
* space
|
|
*/
|
|
if (rinfo->pm_mode & radeon_pm_off) {
|
|
/* Always disable dynamic clocks or weird things are happening when
|
|
* the chip goes off (basically the panel doesn't shut down properly
|
|
* and we crash on wakeup),
|
|
* also, we want the saved regs context to have no dynamic clocks in
|
|
* it, we'll restore the dynamic clocks state on wakeup
|
|
*/
|
|
radeon_pm_disable_dynamic_mode(rinfo);
|
|
mdelay(50);
|
|
radeon_pm_save_regs(rinfo, 1);
|
|
|
|
if (rinfo->is_mobility && !(rinfo->pm_mode & radeon_pm_d2)) {
|
|
/* Switch off LVDS interface */
|
|
mdelay(1);
|
|
OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_BL_MOD_EN));
|
|
mdelay(1);
|
|
OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_EN | LVDS_ON));
|
|
OUTREG(LVDS_PLL_CNTL, (INREG(LVDS_PLL_CNTL) & ~30000) | 0x20000);
|
|
mdelay(20);
|
|
OUTREG(LVDS_GEN_CNTL, INREG(LVDS_GEN_CNTL) & ~(LVDS_DIGON));
|
|
}
|
|
// FIXME: Use PCI layer
|
|
for (i = 0; i < 64; ++i)
|
|
pci_read_config_dword(pdev, i * 4, &rinfo->cfg_save[i]);
|
|
pci_disable_device(pdev);
|
|
}
|
|
/* If we support D2, we go to it (should be fixed later with a flag forcing
|
|
* D3 only for some laptops)
|
|
*/
|
|
if (rinfo->pm_mode & radeon_pm_d2)
|
|
radeon_set_suspend(rinfo, 1);
|
|
|
|
release_console_sem();
|
|
|
|
done:
|
|
pdev->dev.power.power_state = state;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int radeonfb_pci_resume(struct pci_dev *pdev)
|
|
{
|
|
struct fb_info *info = pci_get_drvdata(pdev);
|
|
struct radeonfb_info *rinfo = info->par;
|
|
int rc = 0;
|
|
|
|
if (pdev->dev.power.power_state == 0)
|
|
return 0;
|
|
|
|
if (rinfo->no_schedule) {
|
|
if (try_acquire_console_sem())
|
|
return 0;
|
|
} else
|
|
acquire_console_sem();
|
|
|
|
printk(KERN_DEBUG "radeonfb (%s): resuming from state: %d...\n",
|
|
pci_name(pdev), pdev->dev.power.power_state);
|
|
|
|
|
|
if (pci_enable_device(pdev)) {
|
|
rc = -ENODEV;
|
|
printk(KERN_ERR "radeonfb (%s): can't enable PCI device !\n",
|
|
pci_name(pdev));
|
|
goto bail;
|
|
}
|
|
pci_set_master(pdev);
|
|
|
|
if (pdev->dev.power.power_state == PM_SUSPEND_MEM) {
|
|
/* Wakeup chip. Check from config space if we were powered off
|
|
* (todo: additionally, check CLK_PIN_CNTL too)
|
|
*/
|
|
if ((rinfo->pm_mode & radeon_pm_off) && radeon_restore_pci_cfg(rinfo)) {
|
|
if (rinfo->reinit_func != NULL)
|
|
rinfo->reinit_func(rinfo);
|
|
else {
|
|
printk(KERN_ERR "radeonfb (%s): can't resume radeon from"
|
|
" D3 cold, need softboot !", pci_name(pdev));
|
|
rc = -EIO;
|
|
goto bail;
|
|
}
|
|
}
|
|
/* If we support D2, try to resume... we should check what was our
|
|
* state though... (were we really in D2 state ?). Right now, this code
|
|
* is only enable on Macs so it's fine.
|
|
*/
|
|
else if (rinfo->pm_mode & radeon_pm_d2)
|
|
radeon_set_suspend(rinfo, 0);
|
|
|
|
rinfo->asleep = 0;
|
|
} else
|
|
radeon_engine_idle();
|
|
|
|
/* Restore display & engine */
|
|
radeon_write_mode (rinfo, &rinfo->state, 1);
|
|
if (!(info->flags & FBINFO_HWACCEL_DISABLED))
|
|
radeonfb_engine_init (rinfo);
|
|
|
|
fb_pan_display(info, &info->var);
|
|
fb_set_cmap(&info->cmap, info);
|
|
|
|
/* Refresh */
|
|
fb_set_suspend(info, 0);
|
|
|
|
/* Unblank */
|
|
rinfo->lock_blank = 0;
|
|
radeon_screen_blank(rinfo, FB_BLANK_UNBLANK, 1);
|
|
|
|
#ifdef CONFIG_PPC_PMAC
|
|
/* On powermac, we have hooks to properly suspend/resume AGP now,
|
|
* use them here. We'll ultimately need some generic support here,
|
|
* but the generic code isn't quite ready for that yet
|
|
*/
|
|
pmac_resume_agp_for_card(pdev);
|
|
#endif /* CONFIG_PPC_PMAC */
|
|
|
|
|
|
/* Check status of dynclk */
|
|
if (rinfo->dynclk == 1)
|
|
radeon_pm_enable_dynamic_mode(rinfo);
|
|
else if (rinfo->dynclk == 0)
|
|
radeon_pm_disable_dynamic_mode(rinfo);
|
|
|
|
pdev->dev.power.power_state = PMSG_ON;
|
|
|
|
bail:
|
|
release_console_sem();
|
|
|
|
return rc;
|
|
}
|
|
|
|
#ifdef CONFIG_PPC_OF
|
|
static void radeonfb_early_resume(void *data)
|
|
{
|
|
struct radeonfb_info *rinfo = data;
|
|
|
|
rinfo->no_schedule = 1;
|
|
radeonfb_pci_resume(rinfo->pdev);
|
|
rinfo->no_schedule = 0;
|
|
}
|
|
#endif /* CONFIG_PPC_OF */
|
|
|
|
#endif /* CONFIG_PM */
|
|
|
|
void radeonfb_pm_init(struct radeonfb_info *rinfo, int dynclk)
|
|
{
|
|
/* Find PM registers in config space if any*/
|
|
rinfo->pm_reg = pci_find_capability(rinfo->pdev, PCI_CAP_ID_PM);
|
|
|
|
/* Enable/Disable dynamic clocks: TODO add sysfs access */
|
|
rinfo->dynclk = dynclk;
|
|
if (dynclk == 1) {
|
|
radeon_pm_enable_dynamic_mode(rinfo);
|
|
printk("radeonfb: Dynamic Clock Power Management enabled\n");
|
|
} else if (dynclk == 0) {
|
|
radeon_pm_disable_dynamic_mode(rinfo);
|
|
printk("radeonfb: Dynamic Clock Power Management disabled\n");
|
|
}
|
|
|
|
/* Check if we can power manage on suspend/resume. We can do
|
|
* D2 on M6, M7 and M9, and we can resume from D3 cold a few other
|
|
* "Mac" cards, but that's all. We need more infos about what the
|
|
* BIOS does tho. Right now, all this PM stuff is pmac-only for that
|
|
* reason. --BenH
|
|
*/
|
|
#if defined(CONFIG_PM) && defined(CONFIG_PPC_OF)
|
|
if (_machine == _MACH_Pmac && rinfo->of_node) {
|
|
if (rinfo->is_mobility && rinfo->pm_reg &&
|
|
rinfo->family <= CHIP_FAMILY_RV250)
|
|
rinfo->pm_mode |= radeon_pm_d2;
|
|
|
|
/* We can restart Jasper (M10 chip in albooks), BlueStone (7500 chip
|
|
* in some desktop G4s), and Via (M9+ chip on iBook G4)
|
|
*/
|
|
if (!strcmp(rinfo->of_node->name, "ATY,JasperParent")) {
|
|
rinfo->reinit_func = radeon_reinitialize_M10;
|
|
rinfo->pm_mode |= radeon_pm_off;
|
|
}
|
|
#if 0 /* Not ready yet */
|
|
if (!strcmp(rinfo->of_node->name, "ATY,BlueStoneParent")) {
|
|
rinfo->reinit_func = radeon_reinitialize_QW;
|
|
rinfo->pm_mode |= radeon_pm_off;
|
|
}
|
|
#endif
|
|
if (!strcmp(rinfo->of_node->name, "ATY,ViaParent")) {
|
|
rinfo->reinit_func = radeon_reinitialize_M9P;
|
|
rinfo->pm_mode |= radeon_pm_off;
|
|
}
|
|
|
|
/* If any of the above is set, we assume the machine can sleep/resume.
|
|
* It's a bit of a "shortcut" but will work fine. Ideally, we need infos
|
|
* from the platform about what happens to the chip...
|
|
* Now we tell the platform about our capability
|
|
*/
|
|
if (rinfo->pm_mode != radeon_pm_none) {
|
|
pmac_call_feature(PMAC_FTR_DEVICE_CAN_WAKE, rinfo->of_node, 0, 1);
|
|
pmac_set_early_video_resume(radeonfb_early_resume, rinfo);
|
|
}
|
|
|
|
#if 0
|
|
/* Power down TV DAC, taht saves a significant amount of power,
|
|
* we'll have something better once we actually have some TVOut
|
|
* support
|
|
*/
|
|
OUTREG(TV_DAC_CNTL, INREG(TV_DAC_CNTL) | 0x07000000);
|
|
#endif
|
|
}
|
|
#endif /* defined(CONFIG_PM) && defined(CONFIG_PPC_OF) */
|
|
}
|
|
|
|
void radeonfb_pm_exit(struct radeonfb_info *rinfo)
|
|
{
|
|
#if defined(CONFIG_PM) && defined(CONFIG_PPC_OF)
|
|
if (rinfo->pm_mode != radeon_pm_none)
|
|
pmac_set_early_video_resume(NULL, NULL);
|
|
#endif
|
|
}
|