467 lines
10 KiB
C
467 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* max31827.c - Support for Maxim Low-Power Switch
|
|
*
|
|
* Copyright (c) 2023 Daniel Matyas <daniel.matyas@analog.com>
|
|
*/
|
|
|
|
#include <linux/bitfield.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/hwmon.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/regmap.h>
|
|
|
|
#define MAX31827_T_REG 0x0
|
|
#define MAX31827_CONFIGURATION_REG 0x2
|
|
#define MAX31827_TH_REG 0x4
|
|
#define MAX31827_TL_REG 0x6
|
|
#define MAX31827_TH_HYST_REG 0x8
|
|
#define MAX31827_TL_HYST_REG 0xA
|
|
|
|
#define MAX31827_CONFIGURATION_1SHOT_MASK BIT(0)
|
|
#define MAX31827_CONFIGURATION_CNV_RATE_MASK GENMASK(3, 1)
|
|
#define MAX31827_CONFIGURATION_U_TEMP_STAT_MASK BIT(14)
|
|
#define MAX31827_CONFIGURATION_O_TEMP_STAT_MASK BIT(15)
|
|
|
|
#define MAX31827_12_BIT_CNV_TIME 141
|
|
|
|
#define MAX31827_CNV_1_DIV_64_HZ 0x1
|
|
#define MAX31827_CNV_1_DIV_32_HZ 0x2
|
|
#define MAX31827_CNV_1_DIV_16_HZ 0x3
|
|
#define MAX31827_CNV_1_DIV_4_HZ 0x4
|
|
#define MAX31827_CNV_1_HZ 0x5
|
|
#define MAX31827_CNV_4_HZ 0x6
|
|
#define MAX31827_CNV_8_HZ 0x7
|
|
|
|
#define MAX31827_16_BIT_TO_M_DGR(x) (sign_extend32(x, 15) * 1000 / 16)
|
|
#define MAX31827_M_DGR_TO_16_BIT(x) (((x) << 4) / 1000)
|
|
#define MAX31827_DEVICE_ENABLE(x) ((x) ? 0xA : 0x0)
|
|
|
|
struct max31827_state {
|
|
/*
|
|
* Prevent simultaneous access to the i2c client.
|
|
*/
|
|
struct mutex lock;
|
|
struct regmap *regmap;
|
|
bool enable;
|
|
};
|
|
|
|
static const struct regmap_config max31827_regmap = {
|
|
.reg_bits = 8,
|
|
.val_bits = 16,
|
|
.max_register = 0xA,
|
|
};
|
|
|
|
static int write_alarm_val(struct max31827_state *st, unsigned int reg,
|
|
long val)
|
|
{
|
|
unsigned int cfg;
|
|
unsigned int tmp;
|
|
int ret;
|
|
|
|
val = MAX31827_M_DGR_TO_16_BIT(val);
|
|
|
|
/*
|
|
* Before the Temperature Threshold Alarm and Alarm Hysteresis Threshold
|
|
* register values are changed over I2C, the part must be in shutdown
|
|
* mode.
|
|
*
|
|
* Mutex is used to ensure, that some other process doesn't change the
|
|
* configuration register.
|
|
*/
|
|
mutex_lock(&st->lock);
|
|
|
|
if (!st->enable) {
|
|
ret = regmap_write(st->regmap, reg, val);
|
|
goto unlock;
|
|
}
|
|
|
|
ret = regmap_read(st->regmap, MAX31827_CONFIGURATION_REG, &cfg);
|
|
if (ret)
|
|
goto unlock;
|
|
|
|
tmp = cfg & ~(MAX31827_CONFIGURATION_1SHOT_MASK |
|
|
MAX31827_CONFIGURATION_CNV_RATE_MASK);
|
|
ret = regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, tmp);
|
|
if (ret)
|
|
goto unlock;
|
|
|
|
ret = regmap_write(st->regmap, reg, val);
|
|
if (ret)
|
|
goto unlock;
|
|
|
|
ret = regmap_write(st->regmap, MAX31827_CONFIGURATION_REG, cfg);
|
|
|
|
unlock:
|
|
mutex_unlock(&st->lock);
|
|
return ret;
|
|
}
|
|
|
|
static umode_t max31827_is_visible(const void *state,
|
|
enum hwmon_sensor_types type, u32 attr,
|
|
int channel)
|
|
{
|
|
if (type == hwmon_temp) {
|
|
switch (attr) {
|
|
case hwmon_temp_enable:
|
|
case hwmon_temp_max:
|
|
case hwmon_temp_min:
|
|
case hwmon_temp_max_hyst:
|
|
case hwmon_temp_min_hyst:
|
|
return 0644;
|
|
case hwmon_temp_input:
|
|
case hwmon_temp_min_alarm:
|
|
case hwmon_temp_max_alarm:
|
|
return 0444;
|
|
default:
|
|
return 0;
|
|
}
|
|
} else if (type == hwmon_chip) {
|
|
if (attr == hwmon_chip_update_interval)
|
|
return 0644;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int max31827_read(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long *val)
|
|
{
|
|
struct max31827_state *st = dev_get_drvdata(dev);
|
|
unsigned int uval;
|
|
int ret = 0;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_enable:
|
|
ret = regmap_read(st->regmap,
|
|
MAX31827_CONFIGURATION_REG, &uval);
|
|
if (ret)
|
|
break;
|
|
|
|
uval = FIELD_GET(MAX31827_CONFIGURATION_1SHOT_MASK |
|
|
MAX31827_CONFIGURATION_CNV_RATE_MASK,
|
|
uval);
|
|
*val = !!uval;
|
|
|
|
break;
|
|
case hwmon_temp_input:
|
|
mutex_lock(&st->lock);
|
|
|
|
if (!st->enable) {
|
|
/*
|
|
* This operation requires mutex protection,
|
|
* because the chip configuration should not
|
|
* be changed during the conversion process.
|
|
*/
|
|
|
|
ret = regmap_update_bits(st->regmap,
|
|
MAX31827_CONFIGURATION_REG,
|
|
MAX31827_CONFIGURATION_1SHOT_MASK,
|
|
1);
|
|
if (ret) {
|
|
mutex_unlock(&st->lock);
|
|
return ret;
|
|
}
|
|
|
|
msleep(MAX31827_12_BIT_CNV_TIME);
|
|
}
|
|
ret = regmap_read(st->regmap, MAX31827_T_REG, &uval);
|
|
|
|
mutex_unlock(&st->lock);
|
|
|
|
if (ret)
|
|
break;
|
|
|
|
*val = MAX31827_16_BIT_TO_M_DGR(uval);
|
|
|
|
break;
|
|
case hwmon_temp_max:
|
|
ret = regmap_read(st->regmap, MAX31827_TH_REG, &uval);
|
|
if (ret)
|
|
break;
|
|
|
|
*val = MAX31827_16_BIT_TO_M_DGR(uval);
|
|
break;
|
|
case hwmon_temp_max_hyst:
|
|
ret = regmap_read(st->regmap, MAX31827_TH_HYST_REG,
|
|
&uval);
|
|
if (ret)
|
|
break;
|
|
|
|
*val = MAX31827_16_BIT_TO_M_DGR(uval);
|
|
break;
|
|
case hwmon_temp_max_alarm:
|
|
ret = regmap_read(st->regmap,
|
|
MAX31827_CONFIGURATION_REG, &uval);
|
|
if (ret)
|
|
break;
|
|
|
|
*val = FIELD_GET(MAX31827_CONFIGURATION_O_TEMP_STAT_MASK,
|
|
uval);
|
|
break;
|
|
case hwmon_temp_min:
|
|
ret = regmap_read(st->regmap, MAX31827_TL_REG, &uval);
|
|
if (ret)
|
|
break;
|
|
|
|
*val = MAX31827_16_BIT_TO_M_DGR(uval);
|
|
break;
|
|
case hwmon_temp_min_hyst:
|
|
ret = regmap_read(st->regmap, MAX31827_TL_HYST_REG,
|
|
&uval);
|
|
if (ret)
|
|
break;
|
|
|
|
*val = MAX31827_16_BIT_TO_M_DGR(uval);
|
|
break;
|
|
case hwmon_temp_min_alarm:
|
|
ret = regmap_read(st->regmap,
|
|
MAX31827_CONFIGURATION_REG, &uval);
|
|
if (ret)
|
|
break;
|
|
|
|
*val = FIELD_GET(MAX31827_CONFIGURATION_U_TEMP_STAT_MASK,
|
|
uval);
|
|
break;
|
|
default:
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
break;
|
|
|
|
case hwmon_chip:
|
|
if (attr == hwmon_chip_update_interval) {
|
|
ret = regmap_read(st->regmap,
|
|
MAX31827_CONFIGURATION_REG, &uval);
|
|
if (ret)
|
|
break;
|
|
|
|
uval = FIELD_GET(MAX31827_CONFIGURATION_CNV_RATE_MASK,
|
|
uval);
|
|
switch (uval) {
|
|
case MAX31827_CNV_1_DIV_64_HZ:
|
|
*val = 64000;
|
|
break;
|
|
case MAX31827_CNV_1_DIV_32_HZ:
|
|
*val = 32000;
|
|
break;
|
|
case MAX31827_CNV_1_DIV_16_HZ:
|
|
*val = 16000;
|
|
break;
|
|
case MAX31827_CNV_1_DIV_4_HZ:
|
|
*val = 4000;
|
|
break;
|
|
case MAX31827_CNV_1_HZ:
|
|
*val = 1000;
|
|
break;
|
|
case MAX31827_CNV_4_HZ:
|
|
*val = 250;
|
|
break;
|
|
case MAX31827_CNV_8_HZ:
|
|
*val = 125;
|
|
break;
|
|
default:
|
|
*val = 0;
|
|
break;
|
|
}
|
|
}
|
|
break;
|
|
|
|
default:
|
|
ret = -EOPNOTSUPP;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int max31827_write(struct device *dev, enum hwmon_sensor_types type,
|
|
u32 attr, int channel, long val)
|
|
{
|
|
struct max31827_state *st = dev_get_drvdata(dev);
|
|
int ret;
|
|
|
|
switch (type) {
|
|
case hwmon_temp:
|
|
switch (attr) {
|
|
case hwmon_temp_enable:
|
|
if (val >> 1)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&st->lock);
|
|
/**
|
|
* The chip should not be enabled while a conversion is
|
|
* performed. Neither should the chip be enabled when
|
|
* the alarm values are changed.
|
|
*/
|
|
|
|
st->enable = val;
|
|
|
|
ret = regmap_update_bits(st->regmap,
|
|
MAX31827_CONFIGURATION_REG,
|
|
MAX31827_CONFIGURATION_1SHOT_MASK |
|
|
MAX31827_CONFIGURATION_CNV_RATE_MASK,
|
|
MAX31827_DEVICE_ENABLE(val));
|
|
|
|
mutex_unlock(&st->lock);
|
|
|
|
return ret;
|
|
|
|
case hwmon_temp_max:
|
|
return write_alarm_val(st, MAX31827_TH_REG, val);
|
|
|
|
case hwmon_temp_max_hyst:
|
|
return write_alarm_val(st, MAX31827_TH_HYST_REG, val);
|
|
|
|
case hwmon_temp_min:
|
|
return write_alarm_val(st, MAX31827_TL_REG, val);
|
|
|
|
case hwmon_temp_min_hyst:
|
|
return write_alarm_val(st, MAX31827_TL_HYST_REG, val);
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
case hwmon_chip:
|
|
if (attr == hwmon_chip_update_interval) {
|
|
if (!st->enable)
|
|
return -EINVAL;
|
|
|
|
switch (val) {
|
|
case 125:
|
|
val = MAX31827_CNV_8_HZ;
|
|
break;
|
|
case 250:
|
|
val = MAX31827_CNV_4_HZ;
|
|
break;
|
|
case 1000:
|
|
val = MAX31827_CNV_1_HZ;
|
|
break;
|
|
case 4000:
|
|
val = MAX31827_CNV_1_DIV_4_HZ;
|
|
break;
|
|
case 16000:
|
|
val = MAX31827_CNV_1_DIV_16_HZ;
|
|
break;
|
|
case 32000:
|
|
val = MAX31827_CNV_1_DIV_32_HZ;
|
|
break;
|
|
case 64000:
|
|
val = MAX31827_CNV_1_DIV_64_HZ;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
val = FIELD_PREP(MAX31827_CONFIGURATION_CNV_RATE_MASK,
|
|
val);
|
|
|
|
return regmap_update_bits(st->regmap,
|
|
MAX31827_CONFIGURATION_REG,
|
|
MAX31827_CONFIGURATION_CNV_RATE_MASK,
|
|
val);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
return -EOPNOTSUPP;
|
|
}
|
|
|
|
static int max31827_init_client(struct max31827_state *st)
|
|
{
|
|
st->enable = true;
|
|
|
|
return regmap_update_bits(st->regmap, MAX31827_CONFIGURATION_REG,
|
|
MAX31827_CONFIGURATION_1SHOT_MASK |
|
|
MAX31827_CONFIGURATION_CNV_RATE_MASK,
|
|
MAX31827_DEVICE_ENABLE(1));
|
|
}
|
|
|
|
static const struct hwmon_channel_info *max31827_info[] = {
|
|
HWMON_CHANNEL_INFO(temp, HWMON_T_ENABLE | HWMON_T_INPUT | HWMON_T_MIN |
|
|
HWMON_T_MIN_HYST | HWMON_T_MIN_ALARM |
|
|
HWMON_T_MAX | HWMON_T_MAX_HYST |
|
|
HWMON_T_MAX_ALARM),
|
|
HWMON_CHANNEL_INFO(chip, HWMON_C_UPDATE_INTERVAL),
|
|
NULL,
|
|
};
|
|
|
|
static const struct hwmon_ops max31827_hwmon_ops = {
|
|
.is_visible = max31827_is_visible,
|
|
.read = max31827_read,
|
|
.write = max31827_write,
|
|
};
|
|
|
|
static const struct hwmon_chip_info max31827_chip_info = {
|
|
.ops = &max31827_hwmon_ops,
|
|
.info = max31827_info,
|
|
};
|
|
|
|
static int max31827_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct device *hwmon_dev;
|
|
struct max31827_state *st;
|
|
int err;
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA))
|
|
return -EOPNOTSUPP;
|
|
|
|
st = devm_kzalloc(dev, sizeof(*st), GFP_KERNEL);
|
|
if (!st)
|
|
return -ENOMEM;
|
|
|
|
mutex_init(&st->lock);
|
|
|
|
st->regmap = devm_regmap_init_i2c(client, &max31827_regmap);
|
|
if (IS_ERR(st->regmap))
|
|
return dev_err_probe(dev, PTR_ERR(st->regmap),
|
|
"Failed to allocate regmap.\n");
|
|
|
|
err = max31827_init_client(st);
|
|
if (err)
|
|
return err;
|
|
|
|
hwmon_dev = devm_hwmon_device_register_with_info(dev, client->name, st,
|
|
&max31827_chip_info,
|
|
NULL);
|
|
|
|
return PTR_ERR_OR_ZERO(hwmon_dev);
|
|
}
|
|
|
|
static const struct i2c_device_id max31827_i2c_ids[] = {
|
|
{ "max31827", 0 },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, max31827_i2c_ids);
|
|
|
|
static const struct of_device_id max31827_of_match[] = {
|
|
{ .compatible = "adi,max31827" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, max31827_of_match);
|
|
|
|
static struct i2c_driver max31827_driver = {
|
|
.class = I2C_CLASS_HWMON,
|
|
.driver = {
|
|
.name = "max31827",
|
|
.of_match_table = max31827_of_match,
|
|
},
|
|
.probe = max31827_probe,
|
|
.id_table = max31827_i2c_ids,
|
|
};
|
|
module_i2c_driver(max31827_driver);
|
|
|
|
MODULE_AUTHOR("Daniel Matyas <daniel.matyas@analog.com>");
|
|
MODULE_DESCRIPTION("Maxim MAX31827 low-power temperature switch driver");
|
|
MODULE_LICENSE("GPL");
|