UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/ata
History
Damien Le Moal 0a85890559 ata,scsi: do not issue START STOP UNIT on resume 
During system resume, ata_port_pm_resume() triggers ata EH to
1) Resume the controller
2) Reset and rescan the ports
3) Revalidate devices
This EH execution is started asynchronously from ata_port_pm_resume(),
which means that when sd_resume() is executed, none or only part of the
above processing may have been executed. However, sd_resume() issues a
START STOP UNIT to wake up the drive from sleep mode. This command is
translated to ATA with ata_scsi_start_stop_xlat() and issued to the
device. However, depending on the state of execution of the EH process
and revalidation triggerred by ata_port_pm_resume(), two things may
happen:
1) The START STOP UNIT fails if it is received before the controller has
   been reenabled at the beginning of the EH execution. This is visible
   with error messages like:

ata10.00: device reported invalid CHS sector 0
sd 9:0:0:0: [sdc] Start/Stop Unit failed: Result: hostbyte=DID_OK driverbyte=DRIVER_OK
sd 9:0:0:0: [sdc] Sense Key : Illegal Request [current]
sd 9:0:0:0: [sdc] Add. Sense: Unaligned write command
sd 9:0:0:0: PM: dpm_run_callback(): scsi_bus_resume+0x0/0x90 returns -5
sd 9:0:0:0: PM: failed to resume async: error -5

2) The START STOP UNIT command is received while the EH process is
   on-going, which mean that it is stopped and must wait for its
   completion, at which point the command is rather useless as the drive
   is already fully spun up already. This case results also in a
   significant delay in sd_resume() which is observable by users as
   the entire system resume completion is delayed.

Given that ATA devices will be woken up by libata activity on resume,
sd_resume() has no need to issue a START STOP UNIT command, which solves
the above mentioned problems. Do not issue this command by introducing
the new scsi_device flag no_start_on_resume and setting this flag to 1
in ata_scsi_dev_config(). sd_resume() is modified to issue a START STOP
UNIT command only if this flag is not set.

Reported-by: Paul Ausbeck <paula@soe.ucsc.edu>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=215880
Fixes: a19a93e4c6 ("scsi: core: pm: Rely on the device driver core for async power management")
Signed-off-by: Damien Le Moal <dlemoal@kernel.org>
Tested-by: Tanner Watkins <dalzot@gmail.com>
Tested-by: Paul Ausbeck <paula@soe.ucsc.edu>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
 		2023-08-02 17:01:12 +09:00
..
pata_parport ata: pata_parport: Add missing protocol modules description 2023-07-17 08:30:41 +09:00
Kconfig ahci: qoriq: Add platform dependencies 2023-03-23 10:29:26 +09:00
Makefile ATA changes for 6.3-rc1 2023-02-22 13:35:51 -08:00
acard-ahci.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
ahci.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
ahci.h scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
ahci_brcm.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_ceva.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_da850.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_dm816.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_dwc.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_imx.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_mtk.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_mvebu.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_octeon.c ata: ahci_octeon: Remove unnecessary include 2023-06-23 09:33:53 +09:00
ahci_platform.c driver core changes for 6.5-rc1 2023-07-03 12:56:23 -07:00
ahci_qoriq.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_seattle.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_st.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_sunxi.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_tegra.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ahci_xgene.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
ata_generic.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
ata_piix.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
libahci.c ata: ahci: Cleanup ahci_reset_controller() 2023-06-14 08:49:18 +09:00
libahci_platform.c SCSI misc on 20230426 2023-04-26 15:39:25 -07:00
libata-acpi.c ata: make use of ata_port_is_frozen() helper 2022-10-18 13:53:27 +09:00
libata-core.c ata: libata-core: fix when to fetch sense data for successful commands 2023-07-28 11:30:34 +09:00
libata-eh.c SCSI misc on 20230629 2023-06-30 11:57:07 -07:00
libata-pata-timings.c ata: separate PATA timings code from libata-core.c 2020-03-26 10:28:19 -06:00
libata-pmp.c ata: libata: add tracepoints for ATA error handling 2022-01-05 19:33:01 +09:00
libata-sata.c SCSI misc on 20230629 2023-06-30 11:57:07 -07:00
libata-scsi.c ata,scsi: do not issue START STOP UNIT on resume 2023-08-02 17:01:12 +09:00
libata-sff.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
libata-trace.c ata: scsi: rename flag ATA_QCFLAG_FAILED to ATA_QCFLAG_EH 2023-01-04 13:36:26 +09:00
libata-transport.c ata: libata-transport: fix error handling in ata_tdev_add() 2022-11-11 17:26:05 +09:00
libata-transport.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
libata-zpodd.c libata: zpodd: Fix small read overflow in zpodd_get_mech_type() 2019-07-29 16:00:14 -06:00
libata.h scsi: ata: libata: Set read/write commands CDL index 2023-05-22 17:05:20 -04:00
pata_acpi.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_ali.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_amd.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_arasan_cf.c ata: pata_arasan_cf: Use dev_err_probe() instead dev_err() in data_xfer() 2023-07-26 08:20:22 +09:00
pata_artop.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_atiixp.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_atp867x.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_buddha.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_cmd64x.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_cmd640.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_cs5520.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_cs5530.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_cs5535.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_cs5536.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_cypress.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_efar.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_ep93xx.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_falcon.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_ftide010.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_gayle.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_hpt3x2n.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_hpt3x3.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_hpt37x.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_hpt366.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_icside.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_imx.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_isapnp.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_it821x.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_it8213.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_ixp4xx_cf.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
pata_jmicron.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_legacy.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_macio.c SCSI misc on 20230426 2023-04-26 15:39:25 -07:00
pata_marvell.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_mpc52xx.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_mpiix.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_netcell.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_ninja32.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_ns87410.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_ns87415.c ata: pata_ns87415: mark ns87560_tf_read static 2023-07-28 08:52:42 +09:00
pata_octeon_cf.c ata: pata_octeon_cf: fix error return code in octeon_cf_probe() 2023-07-26 08:32:21 +09:00
pata_of_platform.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
pata_oldpiix.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_opti.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_optidma.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_pcmcia.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_pdc202xx_old.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_pdc2027x.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_piccolo.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_platform.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
pata_pxa.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_radisys.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_rb532_cf.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_rdc.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_rz1000.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_sc1200.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_sch.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_serverworks.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_sil680.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_sis.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_sl82c105.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_triflex.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pata_via.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
pdc_adma.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_dwc_460ex.c SCSI misc on 20230426 2023-04-26 15:39:25 -07:00
sata_fsl.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_gemini.c ata: sata_gemini: Remove dependency on OF for compile tests 2022-10-18 08:04:46 +09:00
sata_gemini.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
sata_highbank.c ata: libata: Make ata_platform_remove_one return void 2023-05-15 06:49:39 +09:00
sata_inic162x.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_mv.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_nv.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_promise.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_promise.h treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 18 2019-05-21 11:28:46 +02:00
sata_qstor.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_rcar.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_sil.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_sil24.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_sis.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_svw.c ata: Use of_property_read_reg() to parse "reg" 2023-06-13 15:38:48 +09:00
sata_sx4.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_uli.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_via.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sata_vsc.c scsi: ata: Declare SCSI host templates const 2023-03-24 19:19:19 -04:00
sis.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00