635 lines
16 KiB
C
635 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/* Copyright (C) 2019-2020 Linaro Limited */
|
|
|
|
#include <linux/acpi.h>
|
|
#include <linux/firmware.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/slab.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#include "xhci.h"
|
|
#include "xhci-trace.h"
|
|
#include "xhci-pci.h"
|
|
|
|
#define RENESAS_FW_VERSION 0x6C
|
|
#define RENESAS_ROM_CONFIG 0xF0
|
|
#define RENESAS_FW_STATUS 0xF4
|
|
#define RENESAS_FW_STATUS_MSB 0xF5
|
|
#define RENESAS_ROM_STATUS 0xF6
|
|
#define RENESAS_ROM_STATUS_MSB 0xF7
|
|
#define RENESAS_DATA0 0xF8
|
|
#define RENESAS_DATA1 0xFC
|
|
|
|
#define RENESAS_FW_VERSION_FIELD GENMASK(23, 7)
|
|
#define RENESAS_FW_VERSION_OFFSET 8
|
|
|
|
#define RENESAS_FW_STATUS_DOWNLOAD_ENABLE BIT(0)
|
|
#define RENESAS_FW_STATUS_LOCK BIT(1)
|
|
#define RENESAS_FW_STATUS_RESULT GENMASK(6, 4)
|
|
#define RENESAS_FW_STATUS_INVALID 0
|
|
#define RENESAS_FW_STATUS_SUCCESS BIT(4)
|
|
#define RENESAS_FW_STATUS_ERROR BIT(5)
|
|
#define RENESAS_FW_STATUS_SET_DATA0 BIT(8)
|
|
#define RENESAS_FW_STATUS_SET_DATA1 BIT(9)
|
|
|
|
#define RENESAS_ROM_STATUS_ACCESS BIT(0)
|
|
#define RENESAS_ROM_STATUS_ERASE BIT(1)
|
|
#define RENESAS_ROM_STATUS_RELOAD BIT(2)
|
|
#define RENESAS_ROM_STATUS_RESULT GENMASK(6, 4)
|
|
#define RENESAS_ROM_STATUS_NO_RESULT 0
|
|
#define RENESAS_ROM_STATUS_SUCCESS BIT(4)
|
|
#define RENESAS_ROM_STATUS_ERROR BIT(5)
|
|
#define RENESAS_ROM_STATUS_SET_DATA0 BIT(8)
|
|
#define RENESAS_ROM_STATUS_SET_DATA1 BIT(9)
|
|
#define RENESAS_ROM_STATUS_ROM_EXISTS BIT(15)
|
|
|
|
#define RENESAS_ROM_ERASE_MAGIC 0x5A65726F
|
|
#define RENESAS_ROM_WRITE_MAGIC 0x53524F4D
|
|
|
|
#define RENESAS_RETRY 10000
|
|
#define RENESAS_DELAY 10
|
|
|
|
static int renesas_fw_download_image(struct pci_dev *dev,
|
|
const u32 *fw, size_t step, bool rom)
|
|
{
|
|
size_t i;
|
|
int err;
|
|
u8 fw_status;
|
|
bool data0_or_data1;
|
|
u32 status_reg;
|
|
|
|
if (rom)
|
|
status_reg = RENESAS_ROM_STATUS_MSB;
|
|
else
|
|
status_reg = RENESAS_FW_STATUS_MSB;
|
|
|
|
/*
|
|
* The hardware does alternate between two 32-bit pages.
|
|
* (This is because each row of the firmware is 8 bytes).
|
|
*
|
|
* for even steps we use DATA0, for odd steps DATA1.
|
|
*/
|
|
data0_or_data1 = (step & 1) == 1;
|
|
|
|
/* step+1. Read "Set DATAX" and confirm it is cleared. */
|
|
for (i = 0; i < RENESAS_RETRY; i++) {
|
|
err = pci_read_config_byte(dev, status_reg, &fw_status);
|
|
if (err) {
|
|
dev_err(&dev->dev, "Read Status failed: %d\n",
|
|
pcibios_err_to_errno(err));
|
|
return pcibios_err_to_errno(err);
|
|
}
|
|
if (!(fw_status & BIT(data0_or_data1)))
|
|
break;
|
|
|
|
udelay(RENESAS_DELAY);
|
|
}
|
|
if (i == RENESAS_RETRY) {
|
|
dev_err(&dev->dev, "Timeout for Set DATAX step: %zd\n", step);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
/*
|
|
* step+2. Write FW data to "DATAX".
|
|
* "LSB is left" => force little endian
|
|
*/
|
|
err = pci_write_config_dword(dev, data0_or_data1 ?
|
|
RENESAS_DATA1 : RENESAS_DATA0,
|
|
(__force u32)cpu_to_le32(fw[step]));
|
|
if (err) {
|
|
dev_err(&dev->dev, "Write to DATAX failed: %d\n",
|
|
pcibios_err_to_errno(err));
|
|
return pcibios_err_to_errno(err);
|
|
}
|
|
|
|
udelay(100);
|
|
|
|
/* step+3. Set "Set DATAX". */
|
|
err = pci_write_config_byte(dev, status_reg, BIT(data0_or_data1));
|
|
if (err) {
|
|
dev_err(&dev->dev, "Write config for DATAX failed: %d\n",
|
|
pcibios_err_to_errno(err));
|
|
return pcibios_err_to_errno(err);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int renesas_fw_verify(const void *fw_data,
|
|
size_t length)
|
|
{
|
|
u16 fw_version_pointer;
|
|
u16 fw_version;
|
|
|
|
/*
|
|
* The Firmware's Data Format is describe in
|
|
* "6.3 Data Format" R19UH0078EJ0500 Rev.5.00 page 124
|
|
*/
|
|
|
|
/*
|
|
* The bootrom chips of the big brother have sizes up to 64k, let's
|
|
* assume that's the biggest the firmware can get.
|
|
*/
|
|
if (length < 0x1000 || length >= 0x10000) {
|
|
pr_err("firmware is size %zd is not (4k - 64k).",
|
|
length);
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* The First 2 bytes are fixed value (55aa). "LSB on Left" */
|
|
if (get_unaligned_le16(fw_data) != 0x55aa) {
|
|
pr_err("no valid firmware header found.");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* verify the firmware version position and print it. */
|
|
fw_version_pointer = get_unaligned_le16(fw_data + 4);
|
|
if (fw_version_pointer + 2 >= length) {
|
|
pr_err("fw ver pointer is outside of the firmware image");
|
|
return -EINVAL;
|
|
}
|
|
|
|
fw_version = get_unaligned_le16(fw_data + fw_version_pointer);
|
|
pr_err("got firmware version: %02x.", fw_version);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static bool renesas_check_rom(struct pci_dev *pdev)
|
|
{
|
|
u16 rom_status;
|
|
int retval;
|
|
|
|
/* Check if external ROM exists */
|
|
retval = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_status);
|
|
if (retval)
|
|
return false;
|
|
|
|
rom_status &= RENESAS_ROM_STATUS_ROM_EXISTS;
|
|
if (rom_status) {
|
|
dev_dbg(&pdev->dev, "External ROM exists\n");
|
|
return true; /* External ROM exists */
|
|
}
|
|
|
|
return false;
|
|
}
|
|
|
|
static int renesas_check_rom_state(struct pci_dev *pdev)
|
|
{
|
|
u16 rom_state;
|
|
u32 version;
|
|
int err;
|
|
|
|
/* check FW version */
|
|
err = pci_read_config_dword(pdev, RENESAS_FW_VERSION, &version);
|
|
if (err)
|
|
return pcibios_err_to_errno(err);
|
|
|
|
version &= RENESAS_FW_VERSION_FIELD;
|
|
version = version >> RENESAS_FW_VERSION_OFFSET;
|
|
dev_dbg(&pdev->dev, "Found ROM version: %x\n", version);
|
|
|
|
/*
|
|
* Test if ROM is present and loaded, if so we can skip everything
|
|
*/
|
|
err = pci_read_config_word(pdev, RENESAS_ROM_STATUS, &rom_state);
|
|
if (err)
|
|
return pcibios_err_to_errno(err);
|
|
|
|
if (rom_state & RENESAS_ROM_STATUS_ROM_EXISTS) {
|
|
/* ROM exists */
|
|
dev_dbg(&pdev->dev, "ROM exists\n");
|
|
|
|
/* Check the "Result Code" Bits (6:4) and act accordingly */
|
|
switch (rom_state & RENESAS_ROM_STATUS_RESULT) {
|
|
case RENESAS_ROM_STATUS_SUCCESS:
|
|
return 0;
|
|
|
|
case RENESAS_ROM_STATUS_NO_RESULT: /* No result yet */
|
|
dev_dbg(&pdev->dev, "Unknown ROM status ...\n");
|
|
return -ENOENT;
|
|
|
|
case RENESAS_ROM_STATUS_ERROR: /* Error State */
|
|
default: /* All other states are marked as "Reserved states" */
|
|
dev_err(&pdev->dev, "Invalid ROM..");
|
|
break;
|
|
}
|
|
}
|
|
|
|
return -EIO;
|
|
}
|
|
|
|
static int renesas_fw_check_running(struct pci_dev *pdev)
|
|
{
|
|
u8 fw_state;
|
|
int err;
|
|
|
|
/*
|
|
* Test if the device is actually needing the firmware. As most
|
|
* BIOSes will initialize the device for us. If the device is
|
|
* initialized.
|
|
*/
|
|
err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_state);
|
|
if (err)
|
|
return pcibios_err_to_errno(err);
|
|
|
|
/*
|
|
* Check if "FW Download Lock" is locked. If it is and the FW is
|
|
* ready we can simply continue. If the FW is not ready, we have
|
|
* to give up.
|
|
*/
|
|
if (fw_state & RENESAS_FW_STATUS_LOCK) {
|
|
dev_dbg(&pdev->dev, "FW Download Lock is engaged.");
|
|
|
|
if (fw_state & RENESAS_FW_STATUS_SUCCESS)
|
|
return 0;
|
|
|
|
dev_err(&pdev->dev,
|
|
"FW Download Lock is set and FW is not ready. Giving Up.");
|
|
return -EIO;
|
|
}
|
|
|
|
/*
|
|
* Check if "FW Download Enable" is set. If someone (us?) tampered
|
|
* with it and it can't be reset, we have to give up too... and
|
|
* ask for a forgiveness and a reboot.
|
|
*/
|
|
if (fw_state & RENESAS_FW_STATUS_DOWNLOAD_ENABLE) {
|
|
dev_err(&pdev->dev,
|
|
"FW Download Enable is stale. Giving Up (poweroff/reboot needed).");
|
|
return -EIO;
|
|
}
|
|
|
|
/* Otherwise, Check the "Result Code" Bits (6:4) and act accordingly */
|
|
switch (fw_state & RENESAS_FW_STATUS_RESULT) {
|
|
case 0: /* No result yet */
|
|
dev_dbg(&pdev->dev, "FW is not ready/loaded yet.");
|
|
|
|
/* tell the caller, that this device needs the firmware. */
|
|
return 1;
|
|
|
|
case RENESAS_FW_STATUS_SUCCESS: /* Success, device should be working. */
|
|
dev_dbg(&pdev->dev, "FW is ready.");
|
|
return 0;
|
|
|
|
case RENESAS_FW_STATUS_ERROR: /* Error State */
|
|
dev_err(&pdev->dev,
|
|
"hardware is in an error state. Giving up (poweroff/reboot needed).");
|
|
return -ENODEV;
|
|
|
|
default: /* All other states are marked as "Reserved states" */
|
|
dev_err(&pdev->dev,
|
|
"hardware is in an invalid state %lx. Giving up (poweroff/reboot needed).",
|
|
(fw_state & RENESAS_FW_STATUS_RESULT) >> 4);
|
|
return -EINVAL;
|
|
}
|
|
}
|
|
|
|
static int renesas_fw_download(struct pci_dev *pdev,
|
|
const struct firmware *fw)
|
|
{
|
|
const u32 *fw_data = (const u32 *)fw->data;
|
|
size_t i;
|
|
int err;
|
|
u8 fw_status;
|
|
|
|
/*
|
|
* For more information and the big picture: please look at the
|
|
* "Firmware Download Sequence" in "7.1 FW Download Interface"
|
|
* of R19UH0078EJ0500 Rev.5.00 page 131
|
|
*/
|
|
|
|
/*
|
|
* 0. Set "FW Download Enable" bit in the
|
|
* "FW Download Control & Status Register" at 0xF4
|
|
*/
|
|
err = pci_write_config_byte(pdev, RENESAS_FW_STATUS,
|
|
RENESAS_FW_STATUS_DOWNLOAD_ENABLE);
|
|
if (err)
|
|
return pcibios_err_to_errno(err);
|
|
|
|
/* 1 - 10 follow one step after the other. */
|
|
for (i = 0; i < fw->size / 4; i++) {
|
|
err = renesas_fw_download_image(pdev, fw_data, i, false);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"Firmware Download Step %zd failed at position %zd bytes with (%d).",
|
|
i, i * 4, err);
|
|
return err;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* This sequence continues until the last data is written to
|
|
* "DATA0" or "DATA1". Naturally, we wait until "SET DATA0/1"
|
|
* is cleared by the hardware beforehand.
|
|
*/
|
|
for (i = 0; i < RENESAS_RETRY; i++) {
|
|
err = pci_read_config_byte(pdev, RENESAS_FW_STATUS_MSB,
|
|
&fw_status);
|
|
if (err)
|
|
return pcibios_err_to_errno(err);
|
|
if (!(fw_status & (BIT(0) | BIT(1))))
|
|
break;
|
|
|
|
udelay(RENESAS_DELAY);
|
|
}
|
|
if (i == RENESAS_RETRY)
|
|
dev_warn(&pdev->dev, "Final Firmware Download step timed out.");
|
|
|
|
/*
|
|
* 11. After finishing writing the last data of FW, the
|
|
* System Software must clear "FW Download Enable"
|
|
*/
|
|
err = pci_write_config_byte(pdev, RENESAS_FW_STATUS, 0);
|
|
if (err)
|
|
return pcibios_err_to_errno(err);
|
|
|
|
/* 12. Read "Result Code" and confirm it is good. */
|
|
for (i = 0; i < RENESAS_RETRY; i++) {
|
|
err = pci_read_config_byte(pdev, RENESAS_FW_STATUS, &fw_status);
|
|
if (err)
|
|
return pcibios_err_to_errno(err);
|
|
if (fw_status & RENESAS_FW_STATUS_SUCCESS)
|
|
break;
|
|
|
|
udelay(RENESAS_DELAY);
|
|
}
|
|
if (i == RENESAS_RETRY) {
|
|
/* Timed out / Error - let's see if we can fix this */
|
|
err = renesas_fw_check_running(pdev);
|
|
switch (err) {
|
|
case 0: /*
|
|
* we shouldn't end up here.
|
|
* maybe it took a little bit longer.
|
|
* But all should be well?
|
|
*/
|
|
break;
|
|
|
|
case 1: /* (No result yet! */
|
|
dev_err(&pdev->dev, "FW Load timedout");
|
|
return -ETIMEDOUT;
|
|
|
|
default:
|
|
return err;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void renesas_rom_erase(struct pci_dev *pdev)
|
|
{
|
|
int retval, i;
|
|
u8 status;
|
|
|
|
dev_dbg(&pdev->dev, "Performing ROM Erase...\n");
|
|
retval = pci_write_config_dword(pdev, RENESAS_DATA0,
|
|
RENESAS_ROM_ERASE_MAGIC);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "ROM erase, magic word write failed: %d\n",
|
|
pcibios_err_to_errno(retval));
|
|
return;
|
|
}
|
|
|
|
retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "ROM status read failed: %d\n",
|
|
pcibios_err_to_errno(retval));
|
|
return;
|
|
}
|
|
status |= RENESAS_ROM_STATUS_ERASE;
|
|
retval = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, status);
|
|
if (retval) {
|
|
dev_err(&pdev->dev, "ROM erase set word write failed\n");
|
|
return;
|
|
}
|
|
|
|
/* sleep a bit while ROM is erased */
|
|
msleep(20);
|
|
|
|
for (i = 0; i < RENESAS_RETRY; i++) {
|
|
retval = pci_read_config_byte(pdev, RENESAS_ROM_STATUS,
|
|
&status);
|
|
status &= RENESAS_ROM_STATUS_ERASE;
|
|
if (!status)
|
|
break;
|
|
|
|
mdelay(RENESAS_DELAY);
|
|
}
|
|
|
|
if (i == RENESAS_RETRY)
|
|
dev_dbg(&pdev->dev, "Chip erase timedout: %x\n", status);
|
|
|
|
dev_dbg(&pdev->dev, "ROM Erase... Done success\n");
|
|
}
|
|
|
|
static bool renesas_setup_rom(struct pci_dev *pdev, const struct firmware *fw)
|
|
{
|
|
const u32 *fw_data = (const u32 *)fw->data;
|
|
int err, i;
|
|
u8 status;
|
|
|
|
/* 2. Write magic word to Data0 */
|
|
err = pci_write_config_dword(pdev, RENESAS_DATA0,
|
|
RENESAS_ROM_WRITE_MAGIC);
|
|
if (err)
|
|
return false;
|
|
|
|
/* 3. Set External ROM access */
|
|
err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
|
|
RENESAS_ROM_STATUS_ACCESS);
|
|
if (err)
|
|
goto remove_bypass;
|
|
|
|
/* 4. Check the result */
|
|
err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
|
|
if (err)
|
|
goto remove_bypass;
|
|
status &= GENMASK(6, 4);
|
|
if (status) {
|
|
dev_err(&pdev->dev,
|
|
"setting external rom failed: %x\n", status);
|
|
goto remove_bypass;
|
|
}
|
|
|
|
/* 5 to 16 Write FW to DATA0/1 while checking SetData0/1 */
|
|
for (i = 0; i < fw->size / 4; i++) {
|
|
err = renesas_fw_download_image(pdev, fw_data, i, true);
|
|
if (err) {
|
|
dev_err(&pdev->dev,
|
|
"ROM Download Step %d failed at position %d bytes with (%d)\n",
|
|
i, i * 4, err);
|
|
goto remove_bypass;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* wait till DATA0/1 is cleared
|
|
*/
|
|
for (i = 0; i < RENESAS_RETRY; i++) {
|
|
err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS_MSB,
|
|
&status);
|
|
if (err)
|
|
goto remove_bypass;
|
|
if (!(status & (BIT(0) | BIT(1))))
|
|
break;
|
|
|
|
udelay(RENESAS_DELAY);
|
|
}
|
|
if (i == RENESAS_RETRY) {
|
|
dev_err(&pdev->dev, "Final Firmware ROM Download step timed out\n");
|
|
goto remove_bypass;
|
|
}
|
|
|
|
/* 17. Remove bypass */
|
|
err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
|
|
if (err)
|
|
return false;
|
|
|
|
udelay(10);
|
|
|
|
/* 18. check result */
|
|
for (i = 0; i < RENESAS_RETRY; i++) {
|
|
err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Read ROM status failed:%d\n",
|
|
pcibios_err_to_errno(err));
|
|
return false;
|
|
}
|
|
status &= RENESAS_ROM_STATUS_RESULT;
|
|
if (status == RENESAS_ROM_STATUS_SUCCESS) {
|
|
dev_dbg(&pdev->dev, "Download ROM success\n");
|
|
break;
|
|
}
|
|
udelay(RENESAS_DELAY);
|
|
}
|
|
if (i == RENESAS_RETRY) { /* Timed out */
|
|
dev_err(&pdev->dev,
|
|
"Download to external ROM TO: %x\n", status);
|
|
return false;
|
|
}
|
|
|
|
dev_dbg(&pdev->dev, "Download to external ROM succeeded\n");
|
|
|
|
/* Last step set Reload */
|
|
err = pci_write_config_byte(pdev, RENESAS_ROM_STATUS,
|
|
RENESAS_ROM_STATUS_RELOAD);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Set ROM execute failed: %d\n",
|
|
pcibios_err_to_errno(err));
|
|
return false;
|
|
}
|
|
|
|
/*
|
|
* wait till Reload is cleared
|
|
*/
|
|
for (i = 0; i < RENESAS_RETRY; i++) {
|
|
err = pci_read_config_byte(pdev, RENESAS_ROM_STATUS, &status);
|
|
if (err)
|
|
return false;
|
|
if (!(status & RENESAS_ROM_STATUS_RELOAD))
|
|
break;
|
|
|
|
udelay(RENESAS_DELAY);
|
|
}
|
|
if (i == RENESAS_RETRY) {
|
|
dev_err(&pdev->dev, "ROM Exec timed out: %x\n", status);
|
|
return false;
|
|
}
|
|
|
|
return true;
|
|
|
|
remove_bypass:
|
|
pci_write_config_byte(pdev, RENESAS_ROM_STATUS, 0);
|
|
return false;
|
|
}
|
|
|
|
static int renesas_load_fw(struct pci_dev *pdev, const struct firmware *fw)
|
|
{
|
|
int err = 0;
|
|
bool rom;
|
|
|
|
/* Check if the device has external ROM */
|
|
rom = renesas_check_rom(pdev);
|
|
if (rom) {
|
|
/* perform chip erase first */
|
|
renesas_rom_erase(pdev);
|
|
|
|
/* lets try loading fw on ROM first */
|
|
rom = renesas_setup_rom(pdev, fw);
|
|
if (!rom) {
|
|
dev_dbg(&pdev->dev,
|
|
"ROM load failed, falling back on FW load\n");
|
|
} else {
|
|
dev_dbg(&pdev->dev,
|
|
"ROM load success\n");
|
|
goto exit;
|
|
}
|
|
}
|
|
|
|
err = renesas_fw_download(pdev, fw);
|
|
|
|
exit:
|
|
if (err)
|
|
dev_err(&pdev->dev, "firmware failed to download (%d).", err);
|
|
return err;
|
|
}
|
|
|
|
int renesas_xhci_check_request_fw(struct pci_dev *pdev,
|
|
const struct pci_device_id *id)
|
|
{
|
|
struct xhci_driver_data *driver_data =
|
|
(struct xhci_driver_data *)id->driver_data;
|
|
const char *fw_name = driver_data->firmware;
|
|
const struct firmware *fw;
|
|
bool has_rom;
|
|
int err;
|
|
|
|
/* Check if device has ROM and loaded, if so skip everything */
|
|
has_rom = renesas_check_rom(pdev);
|
|
if (has_rom) {
|
|
err = renesas_check_rom_state(pdev);
|
|
if (!err)
|
|
return 0;
|
|
else if (err != -ENOENT)
|
|
has_rom = false;
|
|
}
|
|
|
|
err = renesas_fw_check_running(pdev);
|
|
/* Continue ahead, if the firmware is already running. */
|
|
if (!err)
|
|
return 0;
|
|
|
|
/* no firmware interface available */
|
|
if (err != 1)
|
|
return has_rom ? 0 : err;
|
|
|
|
pci_dev_get(pdev);
|
|
err = firmware_request_nowarn(&fw, fw_name, &pdev->dev);
|
|
pci_dev_put(pdev);
|
|
if (err) {
|
|
if (has_rom) {
|
|
dev_info(&pdev->dev, "failed to load firmware %s, fallback to ROM\n",
|
|
fw_name);
|
|
return 0;
|
|
}
|
|
dev_err(&pdev->dev, "failed to load firmware %s: %d\n",
|
|
fw_name, err);
|
|
return err;
|
|
}
|
|
|
|
err = renesas_fw_verify(fw->data, fw->size);
|
|
if (err)
|
|
goto exit;
|
|
|
|
err = renesas_load_fw(pdev, fw);
|
|
exit:
|
|
release_firmware(fw);
|
|
return err;
|
|
}
|
|
EXPORT_SYMBOL_GPL(renesas_xhci_check_request_fw);
|
|
|
|
MODULE_LICENSE("GPL v2");
|