1376 lines
37 KiB
C
1376 lines
37 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Enhanced Host Controller Interface (EHCI) driver for USB.
|
|
*
|
|
* Maintainer: Alan Stern <stern@rowland.harvard.edu>
|
|
*
|
|
* Copyright (c) 2000-2004 by David Brownell
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/dmapool.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/vmalloc.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/init.h>
|
|
#include <linux/hrtimer.h>
|
|
#include <linux/list.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/usb.h>
|
|
#include <linux/usb/hcd.h>
|
|
#include <linux/usb/otg.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/debugfs.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <asm/byteorder.h>
|
|
#include <asm/io.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/unaligned.h>
|
|
|
|
#if defined(CONFIG_PPC_PS3)
|
|
#include <asm/firmware.h>
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* EHCI hc_driver implementation ... experimental, incomplete.
|
|
* Based on the final 1.0 register interface specification.
|
|
*
|
|
* USB 2.0 shows up in upcoming www.pcmcia.org technology.
|
|
* First was PCMCIA, like ISA; then CardBus, which is PCI.
|
|
* Next comes "CardBay", using USB 2.0 signals.
|
|
*
|
|
* Contains additional contributions by Brad Hards, Rory Bolt, and others.
|
|
* Special thanks to Intel and VIA for providing host controllers to
|
|
* test this driver on, and Cypress (including In-System Design) for
|
|
* providing early devices for those host controllers to talk to!
|
|
*/
|
|
|
|
#define DRIVER_AUTHOR "David Brownell"
|
|
#define DRIVER_DESC "USB 2.0 'Enhanced' Host Controller (EHCI) Driver"
|
|
|
|
static const char hcd_name [] = "ehci_hcd";
|
|
|
|
|
|
#undef EHCI_URB_TRACE
|
|
|
|
/* magic numbers that can affect system performance */
|
|
#define EHCI_TUNE_CERR 3 /* 0-3 qtd retries; 0 == don't stop */
|
|
#define EHCI_TUNE_RL_HS 4 /* nak throttle; see 4.9 */
|
|
#define EHCI_TUNE_RL_TT 0
|
|
#define EHCI_TUNE_MULT_HS 1 /* 1-3 transactions/uframe; 4.10.3 */
|
|
#define EHCI_TUNE_MULT_TT 1
|
|
/*
|
|
* Some drivers think it's safe to schedule isochronous transfers more than
|
|
* 256 ms into the future (partly as a result of an old bug in the scheduling
|
|
* code). In an attempt to avoid trouble, we will use a minimum scheduling
|
|
* length of 512 frames instead of 256.
|
|
*/
|
|
#define EHCI_TUNE_FLS 1 /* (medium) 512-frame schedule */
|
|
|
|
/* Initial IRQ latency: faster than hw default */
|
|
static int log2_irq_thresh; // 0 to 6
|
|
module_param (log2_irq_thresh, int, S_IRUGO);
|
|
MODULE_PARM_DESC (log2_irq_thresh, "log2 IRQ latency, 1-64 microframes");
|
|
|
|
/* initial park setting: slower than hw default */
|
|
static unsigned park;
|
|
module_param (park, uint, S_IRUGO);
|
|
MODULE_PARM_DESC (park, "park setting; 1-3 back-to-back async packets");
|
|
|
|
/* for flakey hardware, ignore overcurrent indicators */
|
|
static bool ignore_oc;
|
|
module_param (ignore_oc, bool, S_IRUGO);
|
|
MODULE_PARM_DESC (ignore_oc, "ignore bogus hardware overcurrent indications");
|
|
|
|
#define INTR_MASK (STS_IAA | STS_FATAL | STS_PCD | STS_ERR | STS_INT)
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#include "ehci.h"
|
|
#include "pci-quirks.h"
|
|
|
|
static void compute_tt_budget(u8 budget_table[EHCI_BANDWIDTH_SIZE],
|
|
struct ehci_tt *tt);
|
|
|
|
/*
|
|
* The MosChip MCS9990 controller updates its microframe counter
|
|
* a little before the frame counter, and occasionally we will read
|
|
* the invalid intermediate value. Avoid problems by checking the
|
|
* microframe number (the low-order 3 bits); if they are 0 then
|
|
* re-read the register to get the correct value.
|
|
*/
|
|
static unsigned ehci_moschip_read_frame_index(struct ehci_hcd *ehci)
|
|
{
|
|
unsigned uf;
|
|
|
|
uf = ehci_readl(ehci, &ehci->regs->frame_index);
|
|
if (unlikely((uf & 7) == 0))
|
|
uf = ehci_readl(ehci, &ehci->regs->frame_index);
|
|
return uf;
|
|
}
|
|
|
|
static inline unsigned ehci_read_frame_index(struct ehci_hcd *ehci)
|
|
{
|
|
if (ehci->frame_index_bug)
|
|
return ehci_moschip_read_frame_index(ehci);
|
|
return ehci_readl(ehci, &ehci->regs->frame_index);
|
|
}
|
|
|
|
#include "ehci-dbg.c"
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* ehci_handshake - spin reading hc until handshake completes or fails
|
|
* @ptr: address of hc register to be read
|
|
* @mask: bits to look at in result of read
|
|
* @done: value of those bits when handshake succeeds
|
|
* @usec: timeout in microseconds
|
|
*
|
|
* Returns negative errno, or zero on success
|
|
*
|
|
* Success happens when the "mask" bits have the specified value (hardware
|
|
* handshake done). There are two failure modes: "usec" have passed (major
|
|
* hardware flakeout), or the register reads as all-ones (hardware removed).
|
|
*
|
|
* That last failure should_only happen in cases like physical cardbus eject
|
|
* before driver shutdown. But it also seems to be caused by bugs in cardbus
|
|
* bridge shutdown: shutting down the bridge before the devices using it.
|
|
*/
|
|
int ehci_handshake(struct ehci_hcd *ehci, void __iomem *ptr,
|
|
u32 mask, u32 done, int usec)
|
|
{
|
|
u32 result;
|
|
|
|
do {
|
|
result = ehci_readl(ehci, ptr);
|
|
if (result == ~(u32)0) /* card removed */
|
|
return -ENODEV;
|
|
result &= mask;
|
|
if (result == done)
|
|
return 0;
|
|
udelay (1);
|
|
usec--;
|
|
} while (usec > 0);
|
|
return -ETIMEDOUT;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ehci_handshake);
|
|
|
|
/* check TDI/ARC silicon is in host mode */
|
|
static int tdi_in_host_mode (struct ehci_hcd *ehci)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = ehci_readl(ehci, &ehci->regs->usbmode);
|
|
return (tmp & 3) == USBMODE_CM_HC;
|
|
}
|
|
|
|
/*
|
|
* Force HC to halt state from unknown (EHCI spec section 2.3).
|
|
* Must be called with interrupts enabled and the lock not held.
|
|
*/
|
|
static int ehci_halt (struct ehci_hcd *ehci)
|
|
{
|
|
u32 temp;
|
|
|
|
spin_lock_irq(&ehci->lock);
|
|
|
|
/* disable any irqs left enabled by previous code */
|
|
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
|
|
|
|
if (ehci_is_TDI(ehci) && !tdi_in_host_mode(ehci)) {
|
|
spin_unlock_irq(&ehci->lock);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* This routine gets called during probe before ehci->command
|
|
* has been initialized, so we can't rely on its value.
|
|
*/
|
|
ehci->command &= ~CMD_RUN;
|
|
temp = ehci_readl(ehci, &ehci->regs->command);
|
|
temp &= ~(CMD_RUN | CMD_IAAD);
|
|
ehci_writel(ehci, temp, &ehci->regs->command);
|
|
|
|
spin_unlock_irq(&ehci->lock);
|
|
synchronize_irq(ehci_to_hcd(ehci)->irq);
|
|
|
|
return ehci_handshake(ehci, &ehci->regs->status,
|
|
STS_HALT, STS_HALT, 16 * 125);
|
|
}
|
|
|
|
/* put TDI/ARC silicon into EHCI mode */
|
|
static void tdi_reset (struct ehci_hcd *ehci)
|
|
{
|
|
u32 tmp;
|
|
|
|
tmp = ehci_readl(ehci, &ehci->regs->usbmode);
|
|
tmp |= USBMODE_CM_HC;
|
|
/* The default byte access to MMR space is LE after
|
|
* controller reset. Set the required endian mode
|
|
* for transfer buffers to match the host microprocessor
|
|
*/
|
|
if (ehci_big_endian_mmio(ehci))
|
|
tmp |= USBMODE_BE;
|
|
ehci_writel(ehci, tmp, &ehci->regs->usbmode);
|
|
}
|
|
|
|
/*
|
|
* Reset a non-running (STS_HALT == 1) controller.
|
|
* Must be called with interrupts enabled and the lock not held.
|
|
*/
|
|
int ehci_reset(struct ehci_hcd *ehci)
|
|
{
|
|
int retval;
|
|
u32 command = ehci_readl(ehci, &ehci->regs->command);
|
|
|
|
/* If the EHCI debug controller is active, special care must be
|
|
* taken before and after a host controller reset */
|
|
if (ehci->debug && !dbgp_reset_prep(ehci_to_hcd(ehci)))
|
|
ehci->debug = NULL;
|
|
|
|
command |= CMD_RESET;
|
|
dbg_cmd (ehci, "reset", command);
|
|
ehci_writel(ehci, command, &ehci->regs->command);
|
|
ehci->rh_state = EHCI_RH_HALTED;
|
|
ehci->next_statechange = jiffies;
|
|
retval = ehci_handshake(ehci, &ehci->regs->command,
|
|
CMD_RESET, 0, 250 * 1000);
|
|
|
|
if (ehci->has_hostpc) {
|
|
ehci_writel(ehci, USBMODE_EX_HC | USBMODE_EX_VBPS,
|
|
&ehci->regs->usbmode_ex);
|
|
ehci_writel(ehci, TXFIFO_DEFAULT, &ehci->regs->txfill_tuning);
|
|
}
|
|
if (retval)
|
|
return retval;
|
|
|
|
if (ehci_is_TDI(ehci))
|
|
tdi_reset (ehci);
|
|
|
|
if (ehci->debug)
|
|
dbgp_external_startup(ehci_to_hcd(ehci));
|
|
|
|
ehci->port_c_suspend = ehci->suspended_ports =
|
|
ehci->resuming_ports = 0;
|
|
return retval;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ehci_reset);
|
|
|
|
/*
|
|
* Idle the controller (turn off the schedules).
|
|
* Must be called with interrupts enabled and the lock not held.
|
|
*/
|
|
static void ehci_quiesce (struct ehci_hcd *ehci)
|
|
{
|
|
u32 temp;
|
|
|
|
if (ehci->rh_state != EHCI_RH_RUNNING)
|
|
return;
|
|
|
|
/* wait for any schedule enables/disables to take effect */
|
|
temp = (ehci->command << 10) & (STS_ASS | STS_PSS);
|
|
ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, temp,
|
|
16 * 125);
|
|
|
|
/* then disable anything that's still active */
|
|
spin_lock_irq(&ehci->lock);
|
|
ehci->command &= ~(CMD_ASE | CMD_PSE);
|
|
ehci_writel(ehci, ehci->command, &ehci->regs->command);
|
|
spin_unlock_irq(&ehci->lock);
|
|
|
|
/* hardware can take 16 microframes to turn off ... */
|
|
ehci_handshake(ehci, &ehci->regs->status, STS_ASS | STS_PSS, 0,
|
|
16 * 125);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static void end_iaa_cycle(struct ehci_hcd *ehci);
|
|
static void end_unlink_async(struct ehci_hcd *ehci);
|
|
static void unlink_empty_async(struct ehci_hcd *ehci);
|
|
static void ehci_work(struct ehci_hcd *ehci);
|
|
static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
|
|
static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh);
|
|
static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable);
|
|
|
|
#include "ehci-timer.c"
|
|
#include "ehci-hub.c"
|
|
#include "ehci-mem.c"
|
|
#include "ehci-q.c"
|
|
#include "ehci-sched.c"
|
|
#include "ehci-sysfs.c"
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* On some systems, leaving remote wakeup enabled prevents system shutdown.
|
|
* The firmware seems to think that powering off is a wakeup event!
|
|
* This routine turns off remote wakeup and everything else, on all ports.
|
|
*/
|
|
static void ehci_turn_off_all_ports(struct ehci_hcd *ehci)
|
|
{
|
|
int port = HCS_N_PORTS(ehci->hcs_params);
|
|
|
|
while (port--) {
|
|
spin_unlock_irq(&ehci->lock);
|
|
ehci_port_power(ehci, port, false);
|
|
spin_lock_irq(&ehci->lock);
|
|
ehci_writel(ehci, PORT_RWC_BITS,
|
|
&ehci->regs->port_status[port]);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Halt HC, turn off all ports, and let the BIOS use the companion controllers.
|
|
* Must be called with interrupts enabled and the lock not held.
|
|
*/
|
|
static void ehci_silence_controller(struct ehci_hcd *ehci)
|
|
{
|
|
ehci_halt(ehci);
|
|
|
|
spin_lock_irq(&ehci->lock);
|
|
ehci->rh_state = EHCI_RH_HALTED;
|
|
ehci_turn_off_all_ports(ehci);
|
|
|
|
/* make BIOS/etc use companion controller during reboot */
|
|
ehci_writel(ehci, 0, &ehci->regs->configured_flag);
|
|
|
|
/* unblock posted writes */
|
|
ehci_readl(ehci, &ehci->regs->configured_flag);
|
|
spin_unlock_irq(&ehci->lock);
|
|
}
|
|
|
|
/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
|
|
* This forcibly disables dma and IRQs, helping kexec and other cases
|
|
* where the next system software may expect clean state.
|
|
*/
|
|
static void ehci_shutdown(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
|
|
/**
|
|
* Protect the system from crashing at system shutdown in cases where
|
|
* usb host is not added yet from OTG controller driver.
|
|
* As ehci_setup() not done yet, so stop accessing registers or
|
|
* variables initialized in ehci_setup()
|
|
*/
|
|
if (!ehci->sbrn)
|
|
return;
|
|
|
|
spin_lock_irq(&ehci->lock);
|
|
ehci->shutdown = true;
|
|
ehci->rh_state = EHCI_RH_STOPPING;
|
|
ehci->enabled_hrtimer_events = 0;
|
|
spin_unlock_irq(&ehci->lock);
|
|
|
|
ehci_silence_controller(ehci);
|
|
|
|
hrtimer_cancel(&ehci->hrtimer);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* ehci_work is called from some interrupts, timers, and so on.
|
|
* it calls driver completion functions, after dropping ehci->lock.
|
|
*/
|
|
static void ehci_work (struct ehci_hcd *ehci)
|
|
{
|
|
/* another CPU may drop ehci->lock during a schedule scan while
|
|
* it reports urb completions. this flag guards against bogus
|
|
* attempts at re-entrant schedule scanning.
|
|
*/
|
|
if (ehci->scanning) {
|
|
ehci->need_rescan = true;
|
|
return;
|
|
}
|
|
ehci->scanning = true;
|
|
|
|
rescan:
|
|
ehci->need_rescan = false;
|
|
if (ehci->async_count)
|
|
scan_async(ehci);
|
|
if (ehci->intr_count > 0)
|
|
scan_intr(ehci);
|
|
if (ehci->isoc_count > 0)
|
|
scan_isoc(ehci);
|
|
if (ehci->need_rescan)
|
|
goto rescan;
|
|
ehci->scanning = false;
|
|
|
|
/* the IO watchdog guards against hardware or driver bugs that
|
|
* misplace IRQs, and should let us run completely without IRQs.
|
|
* such lossage has been observed on both VT6202 and VT8235.
|
|
*/
|
|
turn_on_io_watchdog(ehci);
|
|
}
|
|
|
|
/*
|
|
* Called when the ehci_hcd module is removed.
|
|
*/
|
|
static void ehci_stop (struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
|
|
|
|
ehci_dbg (ehci, "stop\n");
|
|
|
|
/* no more interrupts ... */
|
|
|
|
spin_lock_irq(&ehci->lock);
|
|
ehci->enabled_hrtimer_events = 0;
|
|
spin_unlock_irq(&ehci->lock);
|
|
|
|
ehci_quiesce(ehci);
|
|
ehci_silence_controller(ehci);
|
|
ehci_reset (ehci);
|
|
|
|
hrtimer_cancel(&ehci->hrtimer);
|
|
remove_sysfs_files(ehci);
|
|
remove_debug_files (ehci);
|
|
|
|
/* root hub is shut down separately (first, when possible) */
|
|
spin_lock_irq (&ehci->lock);
|
|
end_free_itds(ehci);
|
|
spin_unlock_irq (&ehci->lock);
|
|
ehci_mem_cleanup (ehci);
|
|
|
|
if (ehci->amd_pll_fix == 1)
|
|
usb_amd_dev_put();
|
|
|
|
dbg_status (ehci, "ehci_stop completed",
|
|
ehci_readl(ehci, &ehci->regs->status));
|
|
}
|
|
|
|
/* one-time init, only for memory state */
|
|
static int ehci_init(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
u32 temp;
|
|
int retval;
|
|
u32 hcc_params;
|
|
struct ehci_qh_hw *hw;
|
|
|
|
spin_lock_init(&ehci->lock);
|
|
|
|
/*
|
|
* keep io watchdog by default, those good HCDs could turn off it later
|
|
*/
|
|
ehci->need_io_watchdog = 1;
|
|
|
|
hrtimer_init(&ehci->hrtimer, CLOCK_MONOTONIC, HRTIMER_MODE_ABS);
|
|
ehci->hrtimer.function = ehci_hrtimer_func;
|
|
ehci->next_hrtimer_event = EHCI_HRTIMER_NO_EVENT;
|
|
|
|
hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
|
|
|
|
/*
|
|
* by default set standard 80% (== 100 usec/uframe) max periodic
|
|
* bandwidth as required by USB 2.0
|
|
*/
|
|
ehci->uframe_periodic_max = 100;
|
|
|
|
/*
|
|
* hw default: 1K periodic list heads, one per frame.
|
|
* periodic_size can shrink by USBCMD update if hcc_params allows.
|
|
*/
|
|
ehci->periodic_size = DEFAULT_I_TDPS;
|
|
INIT_LIST_HEAD(&ehci->async_unlink);
|
|
INIT_LIST_HEAD(&ehci->async_idle);
|
|
INIT_LIST_HEAD(&ehci->intr_unlink_wait);
|
|
INIT_LIST_HEAD(&ehci->intr_unlink);
|
|
INIT_LIST_HEAD(&ehci->intr_qh_list);
|
|
INIT_LIST_HEAD(&ehci->cached_itd_list);
|
|
INIT_LIST_HEAD(&ehci->cached_sitd_list);
|
|
INIT_LIST_HEAD(&ehci->tt_list);
|
|
|
|
if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
|
|
/* periodic schedule size can be smaller than default */
|
|
switch (EHCI_TUNE_FLS) {
|
|
case 0: ehci->periodic_size = 1024; break;
|
|
case 1: ehci->periodic_size = 512; break;
|
|
case 2: ehci->periodic_size = 256; break;
|
|
default: BUG();
|
|
}
|
|
}
|
|
if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0)
|
|
return retval;
|
|
|
|
/* controllers may cache some of the periodic schedule ... */
|
|
if (HCC_ISOC_CACHE(hcc_params)) // full frame cache
|
|
ehci->i_thresh = 0;
|
|
else // N microframes cached
|
|
ehci->i_thresh = 2 + HCC_ISOC_THRES(hcc_params);
|
|
|
|
/*
|
|
* dedicate a qh for the async ring head, since we couldn't unlink
|
|
* a 'real' qh without stopping the async schedule [4.8]. use it
|
|
* as the 'reclamation list head' too.
|
|
* its dummy is used in hw_alt_next of many tds, to prevent the qh
|
|
* from automatically advancing to the next td after short reads.
|
|
*/
|
|
ehci->async->qh_next.qh = NULL;
|
|
hw = ehci->async->hw;
|
|
hw->hw_next = QH_NEXT(ehci, ehci->async->qh_dma);
|
|
hw->hw_info1 = cpu_to_hc32(ehci, QH_HEAD);
|
|
#if defined(CONFIG_PPC_PS3)
|
|
hw->hw_info1 |= cpu_to_hc32(ehci, QH_INACTIVATE);
|
|
#endif
|
|
hw->hw_token = cpu_to_hc32(ehci, QTD_STS_HALT);
|
|
hw->hw_qtd_next = EHCI_LIST_END(ehci);
|
|
ehci->async->qh_state = QH_STATE_LINKED;
|
|
hw->hw_alt_next = QTD_NEXT(ehci, ehci->async->dummy->qtd_dma);
|
|
|
|
/* clear interrupt enables, set irq latency */
|
|
if (log2_irq_thresh < 0 || log2_irq_thresh > 6)
|
|
log2_irq_thresh = 0;
|
|
temp = 1 << (16 + log2_irq_thresh);
|
|
if (HCC_PER_PORT_CHANGE_EVENT(hcc_params)) {
|
|
ehci->has_ppcd = 1;
|
|
ehci_dbg(ehci, "enable per-port change event\n");
|
|
temp |= CMD_PPCEE;
|
|
}
|
|
if (HCC_CANPARK(hcc_params)) {
|
|
/* HW default park == 3, on hardware that supports it (like
|
|
* NVidia and ALI silicon), maximizes throughput on the async
|
|
* schedule by avoiding QH fetches between transfers.
|
|
*
|
|
* With fast usb storage devices and NForce2, "park" seems to
|
|
* make problems: throughput reduction (!), data errors...
|
|
*/
|
|
if (park) {
|
|
park = min(park, (unsigned) 3);
|
|
temp |= CMD_PARK;
|
|
temp |= park << 8;
|
|
}
|
|
ehci_dbg(ehci, "park %d\n", park);
|
|
}
|
|
if (HCC_PGM_FRAMELISTLEN(hcc_params)) {
|
|
/* periodic schedule size can be smaller than default */
|
|
temp &= ~(3 << 2);
|
|
temp |= (EHCI_TUNE_FLS << 2);
|
|
}
|
|
ehci->command = temp;
|
|
|
|
/* Accept arbitrarily long scatter-gather lists */
|
|
if (!hcd->localmem_pool)
|
|
hcd->self.sg_tablesize = ~0;
|
|
|
|
/* Prepare for unlinking active QHs */
|
|
ehci->old_current = ~0;
|
|
return 0;
|
|
}
|
|
|
|
/* start HC running; it's halted, ehci_init() has been run (once) */
|
|
static int ehci_run (struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
|
|
u32 temp;
|
|
u32 hcc_params;
|
|
int rc;
|
|
|
|
hcd->uses_new_polling = 1;
|
|
|
|
/* EHCI spec section 4.1 */
|
|
|
|
ehci_writel(ehci, ehci->periodic_dma, &ehci->regs->frame_list);
|
|
ehci_writel(ehci, (u32)ehci->async->qh_dma, &ehci->regs->async_next);
|
|
|
|
/*
|
|
* hcc_params controls whether ehci->regs->segment must (!!!)
|
|
* be used; it constrains QH/ITD/SITD and QTD locations.
|
|
* dma_pool consistent memory always uses segment zero.
|
|
* streaming mappings for I/O buffers, like pci_map_single(),
|
|
* can return segments above 4GB, if the device allows.
|
|
*
|
|
* NOTE: the dma mask is visible through dev->dma_mask, so
|
|
* drivers can pass this info along ... like NETIF_F_HIGHDMA,
|
|
* Scsi_Host.highmem_io, and so forth. It's readonly to all
|
|
* host side drivers though.
|
|
*/
|
|
hcc_params = ehci_readl(ehci, &ehci->caps->hcc_params);
|
|
if (HCC_64BIT_ADDR(hcc_params)) {
|
|
ehci_writel(ehci, 0, &ehci->regs->segment);
|
|
#if 0
|
|
// this is deeply broken on almost all architectures
|
|
if (!dma_set_mask(hcd->self.controller, DMA_BIT_MASK(64)))
|
|
ehci_info(ehci, "enabled 64bit DMA\n");
|
|
#endif
|
|
}
|
|
|
|
|
|
// Philips, Intel, and maybe others need CMD_RUN before the
|
|
// root hub will detect new devices (why?); NEC doesn't
|
|
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
|
|
ehci->command |= CMD_RUN;
|
|
ehci_writel(ehci, ehci->command, &ehci->regs->command);
|
|
dbg_cmd (ehci, "init", ehci->command);
|
|
|
|
/*
|
|
* Start, enabling full USB 2.0 functionality ... usb 1.1 devices
|
|
* are explicitly handed to companion controller(s), so no TT is
|
|
* involved with the root hub. (Except where one is integrated,
|
|
* and there's no companion controller unless maybe for USB OTG.)
|
|
*
|
|
* Turning on the CF flag will transfer ownership of all ports
|
|
* from the companions to the EHCI controller. If any of the
|
|
* companions are in the middle of a port reset at the time, it
|
|
* could cause trouble. Write-locking ehci_cf_port_reset_rwsem
|
|
* guarantees that no resets are in progress. After we set CF,
|
|
* a short delay lets the hardware catch up; new resets shouldn't
|
|
* be started before the port switching actions could complete.
|
|
*/
|
|
down_write(&ehci_cf_port_reset_rwsem);
|
|
ehci->rh_state = EHCI_RH_RUNNING;
|
|
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
|
|
|
|
/* Wait until HC become operational */
|
|
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
|
|
msleep(5);
|
|
rc = ehci_handshake(ehci, &ehci->regs->status, STS_HALT, 0, 100 * 1000);
|
|
|
|
up_write(&ehci_cf_port_reset_rwsem);
|
|
|
|
if (rc) {
|
|
ehci_err(ehci, "USB %x.%x, controller refused to start: %d\n",
|
|
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f), rc);
|
|
return rc;
|
|
}
|
|
|
|
ehci->last_periodic_enable = ktime_get_real();
|
|
|
|
temp = HC_VERSION(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
|
|
ehci_info (ehci,
|
|
"USB %x.%x started, EHCI %x.%02x%s\n",
|
|
((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
|
|
temp >> 8, temp & 0xff,
|
|
(ignore_oc || ehci->spurious_oc) ? ", overcurrent ignored" : "");
|
|
|
|
ehci_writel(ehci, INTR_MASK,
|
|
&ehci->regs->intr_enable); /* Turn On Interrupts */
|
|
|
|
/* GRR this is run-once init(), being done every time the HC starts.
|
|
* So long as they're part of class devices, we can't do it init()
|
|
* since the class device isn't created that early.
|
|
*/
|
|
create_debug_files(ehci);
|
|
create_sysfs_files(ehci);
|
|
|
|
return 0;
|
|
}
|
|
|
|
int ehci_setup(struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
int retval;
|
|
|
|
ehci->regs = (void __iomem *)ehci->caps +
|
|
HC_LENGTH(ehci, ehci_readl(ehci, &ehci->caps->hc_capbase));
|
|
dbg_hcs_params(ehci, "reset");
|
|
dbg_hcc_params(ehci, "reset");
|
|
|
|
/* cache this readonly data; minimize chip reads */
|
|
ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
|
|
|
|
ehci->sbrn = HCD_USB2;
|
|
|
|
/* data structure init */
|
|
retval = ehci_init(hcd);
|
|
if (retval)
|
|
return retval;
|
|
|
|
retval = ehci_halt(ehci);
|
|
if (retval) {
|
|
ehci_mem_cleanup(ehci);
|
|
return retval;
|
|
}
|
|
|
|
ehci_reset(ehci);
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ehci_setup);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
static irqreturn_t ehci_irq (struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
|
|
u32 status, current_status, masked_status, pcd_status = 0;
|
|
u32 cmd;
|
|
int bh;
|
|
|
|
spin_lock(&ehci->lock);
|
|
|
|
status = 0;
|
|
current_status = ehci_readl(ehci, &ehci->regs->status);
|
|
restart:
|
|
|
|
/* e.g. cardbus physical eject */
|
|
if (current_status == ~(u32) 0) {
|
|
ehci_dbg (ehci, "device removed\n");
|
|
goto dead;
|
|
}
|
|
status |= current_status;
|
|
|
|
/*
|
|
* We don't use STS_FLR, but some controllers don't like it to
|
|
* remain on, so mask it out along with the other status bits.
|
|
*/
|
|
masked_status = current_status & (INTR_MASK | STS_FLR);
|
|
|
|
/* Shared IRQ? */
|
|
if (!masked_status || unlikely(ehci->rh_state == EHCI_RH_HALTED)) {
|
|
spin_unlock(&ehci->lock);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
/* clear (just) interrupts */
|
|
ehci_writel(ehci, masked_status, &ehci->regs->status);
|
|
|
|
/* For edge interrupts, don't race with an interrupt bit being raised */
|
|
current_status = ehci_readl(ehci, &ehci->regs->status);
|
|
if (current_status & INTR_MASK)
|
|
goto restart;
|
|
|
|
cmd = ehci_readl(ehci, &ehci->regs->command);
|
|
bh = 0;
|
|
|
|
/* normal [4.15.1.2] or error [4.15.1.1] completion */
|
|
if (likely ((status & (STS_INT|STS_ERR)) != 0)) {
|
|
if (likely ((status & STS_ERR) == 0))
|
|
INCR(ehci->stats.normal);
|
|
else
|
|
INCR(ehci->stats.error);
|
|
bh = 1;
|
|
}
|
|
|
|
/* complete the unlinking of some qh [4.15.2.3] */
|
|
if (status & STS_IAA) {
|
|
|
|
/* Turn off the IAA watchdog */
|
|
ehci->enabled_hrtimer_events &= ~BIT(EHCI_HRTIMER_IAA_WATCHDOG);
|
|
|
|
/*
|
|
* Mild optimization: Allow another IAAD to reset the
|
|
* hrtimer, if one occurs before the next expiration.
|
|
* In theory we could always cancel the hrtimer, but
|
|
* tests show that about half the time it will be reset
|
|
* for some other event anyway.
|
|
*/
|
|
if (ehci->next_hrtimer_event == EHCI_HRTIMER_IAA_WATCHDOG)
|
|
++ehci->next_hrtimer_event;
|
|
|
|
/* guard against (alleged) silicon errata */
|
|
if (cmd & CMD_IAAD)
|
|
ehci_dbg(ehci, "IAA with IAAD still set?\n");
|
|
if (ehci->iaa_in_progress)
|
|
INCR(ehci->stats.iaa);
|
|
end_iaa_cycle(ehci);
|
|
}
|
|
|
|
/* remote wakeup [4.3.1] */
|
|
if (status & STS_PCD) {
|
|
unsigned i = HCS_N_PORTS (ehci->hcs_params);
|
|
u32 ppcd = ~0;
|
|
|
|
/* kick root hub later */
|
|
pcd_status = status;
|
|
|
|
/* resume root hub? */
|
|
if (ehci->rh_state == EHCI_RH_SUSPENDED)
|
|
usb_hcd_resume_root_hub(hcd);
|
|
|
|
/* get per-port change detect bits */
|
|
if (ehci->has_ppcd)
|
|
ppcd = status >> 16;
|
|
|
|
while (i--) {
|
|
int pstatus;
|
|
|
|
/* leverage per-port change bits feature */
|
|
if (!(ppcd & (1 << i)))
|
|
continue;
|
|
pstatus = ehci_readl(ehci,
|
|
&ehci->regs->port_status[i]);
|
|
|
|
if (pstatus & PORT_OWNER)
|
|
continue;
|
|
if (!(test_bit(i, &ehci->suspended_ports) &&
|
|
((pstatus & PORT_RESUME) ||
|
|
!(pstatus & PORT_SUSPEND)) &&
|
|
(pstatus & PORT_PE) &&
|
|
ehci->reset_done[i] == 0))
|
|
continue;
|
|
|
|
/* start USB_RESUME_TIMEOUT msec resume signaling from
|
|
* this port, and make hub_wq collect
|
|
* PORT_STAT_C_SUSPEND to stop that signaling.
|
|
*/
|
|
ehci->reset_done[i] = jiffies +
|
|
msecs_to_jiffies(USB_RESUME_TIMEOUT);
|
|
set_bit(i, &ehci->resuming_ports);
|
|
ehci_dbg (ehci, "port %d remote wakeup\n", i + 1);
|
|
usb_hcd_start_port_resume(&hcd->self, i);
|
|
mod_timer(&hcd->rh_timer, ehci->reset_done[i]);
|
|
}
|
|
}
|
|
|
|
/* PCI errors [4.15.2.4] */
|
|
if (unlikely ((status & STS_FATAL) != 0)) {
|
|
ehci_err(ehci, "fatal error\n");
|
|
dbg_cmd(ehci, "fatal", cmd);
|
|
dbg_status(ehci, "fatal", status);
|
|
dead:
|
|
usb_hc_died(hcd);
|
|
|
|
/* Don't let the controller do anything more */
|
|
ehci->shutdown = true;
|
|
ehci->rh_state = EHCI_RH_STOPPING;
|
|
ehci->command &= ~(CMD_RUN | CMD_ASE | CMD_PSE);
|
|
ehci_writel(ehci, ehci->command, &ehci->regs->command);
|
|
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
|
|
ehci_handle_controller_death(ehci);
|
|
|
|
/* Handle completions when the controller stops */
|
|
bh = 0;
|
|
}
|
|
|
|
if (bh)
|
|
ehci_work (ehci);
|
|
spin_unlock(&ehci->lock);
|
|
if (pcd_status)
|
|
usb_hcd_poll_rh_status(hcd);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* non-error returns are a promise to giveback() the urb later
|
|
* we drop ownership so next owner (or urb unlink) can get it
|
|
*
|
|
* urb + dev is in hcd.self.controller.urb_list
|
|
* we're queueing TDs onto software and hardware lists
|
|
*
|
|
* hcd-specific init for hcpriv hasn't been done yet
|
|
*
|
|
* NOTE: control, bulk, and interrupt share the same code to append TDs
|
|
* to a (possibly active) QH, and the same QH scanning code.
|
|
*/
|
|
static int ehci_urb_enqueue (
|
|
struct usb_hcd *hcd,
|
|
struct urb *urb,
|
|
gfp_t mem_flags
|
|
) {
|
|
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
|
|
struct list_head qtd_list;
|
|
|
|
INIT_LIST_HEAD (&qtd_list);
|
|
|
|
switch (usb_pipetype (urb->pipe)) {
|
|
case PIPE_CONTROL:
|
|
/* qh_completions() code doesn't handle all the fault cases
|
|
* in multi-TD control transfers. Even 1KB is rare anyway.
|
|
*/
|
|
if (urb->transfer_buffer_length > (16 * 1024))
|
|
return -EMSGSIZE;
|
|
fallthrough;
|
|
/* case PIPE_BULK: */
|
|
default:
|
|
if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
|
|
return -ENOMEM;
|
|
return submit_async(ehci, urb, &qtd_list, mem_flags);
|
|
|
|
case PIPE_INTERRUPT:
|
|
if (!qh_urb_transaction (ehci, urb, &qtd_list, mem_flags))
|
|
return -ENOMEM;
|
|
return intr_submit(ehci, urb, &qtd_list, mem_flags);
|
|
|
|
case PIPE_ISOCHRONOUS:
|
|
if (urb->dev->speed == USB_SPEED_HIGH)
|
|
return itd_submit (ehci, urb, mem_flags);
|
|
else
|
|
return sitd_submit (ehci, urb, mem_flags);
|
|
}
|
|
}
|
|
|
|
/* remove from hardware lists
|
|
* completions normally happen asynchronously
|
|
*/
|
|
|
|
static int ehci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
|
|
struct ehci_qh *qh;
|
|
unsigned long flags;
|
|
int rc;
|
|
|
|
spin_lock_irqsave (&ehci->lock, flags);
|
|
rc = usb_hcd_check_unlink_urb(hcd, urb, status);
|
|
if (rc)
|
|
goto done;
|
|
|
|
if (usb_pipetype(urb->pipe) == PIPE_ISOCHRONOUS) {
|
|
/*
|
|
* We don't expedite dequeue for isochronous URBs.
|
|
* Just wait until they complete normally or their
|
|
* time slot expires.
|
|
*/
|
|
} else {
|
|
qh = (struct ehci_qh *) urb->hcpriv;
|
|
qh->unlink_reason |= QH_UNLINK_REQUESTED;
|
|
switch (qh->qh_state) {
|
|
case QH_STATE_LINKED:
|
|
if (usb_pipetype(urb->pipe) == PIPE_INTERRUPT)
|
|
start_unlink_intr(ehci, qh);
|
|
else
|
|
start_unlink_async(ehci, qh);
|
|
break;
|
|
case QH_STATE_COMPLETING:
|
|
qh->dequeue_during_giveback = 1;
|
|
break;
|
|
case QH_STATE_UNLINK:
|
|
case QH_STATE_UNLINK_WAIT:
|
|
/* already started */
|
|
break;
|
|
case QH_STATE_IDLE:
|
|
/* QH might be waiting for a Clear-TT-Buffer */
|
|
qh_completions(ehci, qh);
|
|
break;
|
|
}
|
|
}
|
|
done:
|
|
spin_unlock_irqrestore (&ehci->lock, flags);
|
|
return rc;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
// bulk qh holds the data toggle
|
|
|
|
static void
|
|
ehci_endpoint_disable (struct usb_hcd *hcd, struct usb_host_endpoint *ep)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
|
|
unsigned long flags;
|
|
struct ehci_qh *qh;
|
|
|
|
/* ASSERT: any requests/urbs are being unlinked */
|
|
/* ASSERT: nobody can be submitting urbs for this any more */
|
|
|
|
rescan:
|
|
spin_lock_irqsave (&ehci->lock, flags);
|
|
qh = ep->hcpriv;
|
|
if (!qh)
|
|
goto done;
|
|
|
|
/* endpoints can be iso streams. for now, we don't
|
|
* accelerate iso completions ... so spin a while.
|
|
*/
|
|
if (qh->hw == NULL) {
|
|
struct ehci_iso_stream *stream = ep->hcpriv;
|
|
|
|
if (!list_empty(&stream->td_list))
|
|
goto idle_timeout;
|
|
|
|
/* BUG_ON(!list_empty(&stream->free_list)); */
|
|
reserve_release_iso_bandwidth(ehci, stream, -1);
|
|
kfree(stream);
|
|
goto done;
|
|
}
|
|
|
|
qh->unlink_reason |= QH_UNLINK_REQUESTED;
|
|
switch (qh->qh_state) {
|
|
case QH_STATE_LINKED:
|
|
if (list_empty(&qh->qtd_list))
|
|
qh->unlink_reason |= QH_UNLINK_QUEUE_EMPTY;
|
|
else
|
|
WARN_ON(1);
|
|
if (usb_endpoint_type(&ep->desc) != USB_ENDPOINT_XFER_INT)
|
|
start_unlink_async(ehci, qh);
|
|
else
|
|
start_unlink_intr(ehci, qh);
|
|
fallthrough;
|
|
case QH_STATE_COMPLETING: /* already in unlinking */
|
|
case QH_STATE_UNLINK: /* wait for hw to finish? */
|
|
case QH_STATE_UNLINK_WAIT:
|
|
idle_timeout:
|
|
spin_unlock_irqrestore (&ehci->lock, flags);
|
|
schedule_timeout_uninterruptible(1);
|
|
goto rescan;
|
|
case QH_STATE_IDLE: /* fully unlinked */
|
|
if (qh->clearing_tt)
|
|
goto idle_timeout;
|
|
if (list_empty (&qh->qtd_list)) {
|
|
if (qh->ps.bw_uperiod)
|
|
reserve_release_intr_bandwidth(ehci, qh, -1);
|
|
qh_destroy(ehci, qh);
|
|
break;
|
|
}
|
|
fallthrough;
|
|
default:
|
|
/* caller was supposed to have unlinked any requests;
|
|
* that's not our job. just leak this memory.
|
|
*/
|
|
ehci_err (ehci, "qh %p (#%02x) state %d%s\n",
|
|
qh, ep->desc.bEndpointAddress, qh->qh_state,
|
|
list_empty (&qh->qtd_list) ? "" : "(has tds)");
|
|
break;
|
|
}
|
|
done:
|
|
ep->hcpriv = NULL;
|
|
spin_unlock_irqrestore (&ehci->lock, flags);
|
|
}
|
|
|
|
static void
|
|
ehci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
struct ehci_qh *qh;
|
|
int eptype = usb_endpoint_type(&ep->desc);
|
|
int epnum = usb_endpoint_num(&ep->desc);
|
|
int is_out = usb_endpoint_dir_out(&ep->desc);
|
|
unsigned long flags;
|
|
|
|
if (eptype != USB_ENDPOINT_XFER_BULK && eptype != USB_ENDPOINT_XFER_INT)
|
|
return;
|
|
|
|
spin_lock_irqsave(&ehci->lock, flags);
|
|
qh = ep->hcpriv;
|
|
|
|
/* For Bulk and Interrupt endpoints we maintain the toggle state
|
|
* in the hardware; the toggle bits in udev aren't used at all.
|
|
* When an endpoint is reset by usb_clear_halt() we must reset
|
|
* the toggle bit in the QH.
|
|
*/
|
|
if (qh) {
|
|
if (!list_empty(&qh->qtd_list)) {
|
|
WARN_ONCE(1, "clear_halt for a busy endpoint\n");
|
|
} else {
|
|
/* The toggle value in the QH can't be updated
|
|
* while the QH is active. Unlink it now;
|
|
* re-linking will call qh_refresh().
|
|
*/
|
|
usb_settoggle(qh->ps.udev, epnum, is_out, 0);
|
|
qh->unlink_reason |= QH_UNLINK_REQUESTED;
|
|
if (eptype == USB_ENDPOINT_XFER_BULK)
|
|
start_unlink_async(ehci, qh);
|
|
else
|
|
start_unlink_intr(ehci, qh);
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&ehci->lock, flags);
|
|
}
|
|
|
|
static int ehci_get_frame (struct usb_hcd *hcd)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci (hcd);
|
|
return (ehci_read_frame_index(ehci) >> 3) % ehci->periodic_size;
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/* Device addition and removal */
|
|
|
|
static void ehci_remove_device(struct usb_hcd *hcd, struct usb_device *udev)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
|
|
spin_lock_irq(&ehci->lock);
|
|
drop_tt(udev);
|
|
spin_unlock_irq(&ehci->lock);
|
|
}
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
#ifdef CONFIG_PM
|
|
|
|
/* suspend/resume, section 4.3 */
|
|
|
|
/* These routines handle the generic parts of controller suspend/resume */
|
|
|
|
int ehci_suspend(struct usb_hcd *hcd, bool do_wakeup)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
|
|
if (time_before(jiffies, ehci->next_statechange))
|
|
msleep(10);
|
|
|
|
/*
|
|
* Root hub was already suspended. Disable IRQ emission and
|
|
* mark HW unaccessible. The PM and USB cores make sure that
|
|
* the root hub is either suspended or stopped.
|
|
*/
|
|
ehci_prepare_ports_for_controller_suspend(ehci, do_wakeup);
|
|
|
|
spin_lock_irq(&ehci->lock);
|
|
ehci_writel(ehci, 0, &ehci->regs->intr_enable);
|
|
(void) ehci_readl(ehci, &ehci->regs->intr_enable);
|
|
|
|
clear_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
spin_unlock_irq(&ehci->lock);
|
|
|
|
synchronize_irq(hcd->irq);
|
|
|
|
/* Check for race with a wakeup request */
|
|
if (do_wakeup && HCD_WAKEUP_PENDING(hcd)) {
|
|
ehci_resume(hcd, false);
|
|
return -EBUSY;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ehci_suspend);
|
|
|
|
/* Returns 0 if power was preserved, 1 if power was lost */
|
|
int ehci_resume(struct usb_hcd *hcd, bool force_reset)
|
|
{
|
|
struct ehci_hcd *ehci = hcd_to_ehci(hcd);
|
|
|
|
if (time_before(jiffies, ehci->next_statechange))
|
|
msleep(100);
|
|
|
|
/* Mark hardware accessible again as we are back to full power by now */
|
|
set_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags);
|
|
|
|
if (ehci->shutdown)
|
|
return 0; /* Controller is dead */
|
|
|
|
/*
|
|
* If CF is still set and reset isn't forced
|
|
* then we maintained suspend power.
|
|
* Just undo the effect of ehci_suspend().
|
|
*/
|
|
if (ehci_readl(ehci, &ehci->regs->configured_flag) == FLAG_CF &&
|
|
!force_reset) {
|
|
int mask = INTR_MASK;
|
|
|
|
ehci_prepare_ports_for_controller_resume(ehci);
|
|
|
|
spin_lock_irq(&ehci->lock);
|
|
if (ehci->shutdown)
|
|
goto skip;
|
|
|
|
if (!hcd->self.root_hub->do_remote_wakeup)
|
|
mask &= ~STS_PCD;
|
|
ehci_writel(ehci, mask, &ehci->regs->intr_enable);
|
|
ehci_readl(ehci, &ehci->regs->intr_enable);
|
|
skip:
|
|
spin_unlock_irq(&ehci->lock);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Else reset, to cope with power loss or resume from hibernation
|
|
* having let the firmware kick in during reboot.
|
|
*/
|
|
usb_root_hub_lost_power(hcd->self.root_hub);
|
|
(void) ehci_halt(ehci);
|
|
(void) ehci_reset(ehci);
|
|
|
|
spin_lock_irq(&ehci->lock);
|
|
if (ehci->shutdown)
|
|
goto skip;
|
|
|
|
ehci_writel(ehci, ehci->command, &ehci->regs->command);
|
|
ehci_writel(ehci, FLAG_CF, &ehci->regs->configured_flag);
|
|
ehci_readl(ehci, &ehci->regs->command); /* unblock posted writes */
|
|
|
|
ehci->rh_state = EHCI_RH_SUSPENDED;
|
|
spin_unlock_irq(&ehci->lock);
|
|
|
|
return 1;
|
|
}
|
|
EXPORT_SYMBOL_GPL(ehci_resume);
|
|
|
|
#endif
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
/*
|
|
* Generic structure: This gets copied for platform drivers so that
|
|
* individual entries can be overridden as needed.
|
|
*/
|
|
|
|
static const struct hc_driver ehci_hc_driver = {
|
|
.description = hcd_name,
|
|
.product_desc = "EHCI Host Controller",
|
|
.hcd_priv_size = sizeof(struct ehci_hcd),
|
|
|
|
/*
|
|
* generic hardware linkage
|
|
*/
|
|
.irq = ehci_irq,
|
|
.flags = HCD_MEMORY | HCD_DMA | HCD_USB2 | HCD_BH,
|
|
|
|
/*
|
|
* basic lifecycle operations
|
|
*/
|
|
.reset = ehci_setup,
|
|
.start = ehci_run,
|
|
.stop = ehci_stop,
|
|
.shutdown = ehci_shutdown,
|
|
|
|
/*
|
|
* managing i/o requests and associated device resources
|
|
*/
|
|
.urb_enqueue = ehci_urb_enqueue,
|
|
.urb_dequeue = ehci_urb_dequeue,
|
|
.endpoint_disable = ehci_endpoint_disable,
|
|
.endpoint_reset = ehci_endpoint_reset,
|
|
.clear_tt_buffer_complete = ehci_clear_tt_buffer_complete,
|
|
|
|
/*
|
|
* scheduling support
|
|
*/
|
|
.get_frame_number = ehci_get_frame,
|
|
|
|
/*
|
|
* root hub support
|
|
*/
|
|
.hub_status_data = ehci_hub_status_data,
|
|
.hub_control = ehci_hub_control,
|
|
.bus_suspend = ehci_bus_suspend,
|
|
.bus_resume = ehci_bus_resume,
|
|
.relinquish_port = ehci_relinquish_port,
|
|
.port_handed_over = ehci_port_handed_over,
|
|
.get_resuming_ports = ehci_get_resuming_ports,
|
|
|
|
/*
|
|
* device support
|
|
*/
|
|
.free_dev = ehci_remove_device,
|
|
#ifdef CONFIG_USB_HCD_TEST_MODE
|
|
/* EH SINGLE_STEP_SET_FEATURE test support */
|
|
.submit_single_step_set_feature = ehci_submit_single_step_set_feature,
|
|
#endif
|
|
};
|
|
|
|
void ehci_init_driver(struct hc_driver *drv,
|
|
const struct ehci_driver_overrides *over)
|
|
{
|
|
/* Copy the generic table to drv and then apply the overrides */
|
|
*drv = ehci_hc_driver;
|
|
|
|
if (over) {
|
|
drv->hcd_priv_size += over->extra_priv_size;
|
|
if (over->reset)
|
|
drv->reset = over->reset;
|
|
if (over->port_power)
|
|
drv->port_power = over->port_power;
|
|
}
|
|
}
|
|
EXPORT_SYMBOL_GPL(ehci_init_driver);
|
|
|
|
/*-------------------------------------------------------------------------*/
|
|
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_AUTHOR (DRIVER_AUTHOR);
|
|
MODULE_LICENSE ("GPL");
|
|
|
|
#ifdef CONFIG_USB_EHCI_SH
|
|
#include "ehci-sh.c"
|
|
#endif
|
|
|
|
#ifdef CONFIG_PPC_PS3
|
|
#include "ehci-ps3.c"
|
|
#endif
|
|
|
|
#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
|
|
#include "ehci-ppc-of.c"
|
|
#endif
|
|
|
|
#ifdef CONFIG_XPS_USB_HCD_XILINX
|
|
#include "ehci-xilinx-of.c"
|
|
#endif
|
|
|
|
#ifdef CONFIG_SPARC_LEON
|
|
#include "ehci-grlib.c"
|
|
#endif
|
|
|
|
static struct platform_driver * const platform_drivers[] = {
|
|
#ifdef CONFIG_USB_EHCI_SH
|
|
&ehci_hcd_sh_driver,
|
|
#endif
|
|
#ifdef CONFIG_USB_EHCI_HCD_PPC_OF
|
|
&ehci_hcd_ppc_of_driver,
|
|
#endif
|
|
#ifdef CONFIG_XPS_USB_HCD_XILINX
|
|
&ehci_hcd_xilinx_of_driver,
|
|
#endif
|
|
#ifdef CONFIG_SPARC_LEON
|
|
&ehci_grlib_driver,
|
|
#endif
|
|
};
|
|
|
|
static int __init ehci_hcd_init(void)
|
|
{
|
|
int retval = 0;
|
|
|
|
if (usb_disabled())
|
|
return -ENODEV;
|
|
|
|
printk(KERN_INFO "%s: " DRIVER_DESC "\n", hcd_name);
|
|
set_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
|
|
if (test_bit(USB_UHCI_LOADED, &usb_hcds_loaded) ||
|
|
test_bit(USB_OHCI_LOADED, &usb_hcds_loaded))
|
|
printk(KERN_WARNING "Warning! ehci_hcd should always be loaded"
|
|
" before uhci_hcd and ohci_hcd, not after\n");
|
|
|
|
pr_debug("%s: block sizes: qh %zd qtd %zd itd %zd sitd %zd\n",
|
|
hcd_name,
|
|
sizeof(struct ehci_qh), sizeof(struct ehci_qtd),
|
|
sizeof(struct ehci_itd), sizeof(struct ehci_sitd));
|
|
|
|
#ifdef CONFIG_DYNAMIC_DEBUG
|
|
ehci_debug_root = debugfs_create_dir("ehci", usb_debug_root);
|
|
#endif
|
|
|
|
retval = platform_register_drivers(platform_drivers, ARRAY_SIZE(platform_drivers));
|
|
if (retval < 0)
|
|
goto clean0;
|
|
|
|
#ifdef CONFIG_PPC_PS3
|
|
retval = ps3_ehci_driver_register(&ps3_ehci_driver);
|
|
if (retval < 0)
|
|
goto clean1;
|
|
#endif
|
|
|
|
return 0;
|
|
|
|
#ifdef CONFIG_PPC_PS3
|
|
clean1:
|
|
#endif
|
|
platform_unregister_drivers(platform_drivers, ARRAY_SIZE(platform_drivers));
|
|
clean0:
|
|
#ifdef CONFIG_DYNAMIC_DEBUG
|
|
debugfs_remove(ehci_debug_root);
|
|
ehci_debug_root = NULL;
|
|
#endif
|
|
clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
|
|
return retval;
|
|
}
|
|
module_init(ehci_hcd_init);
|
|
|
|
static void __exit ehci_hcd_cleanup(void)
|
|
{
|
|
#ifdef CONFIG_PPC_PS3
|
|
ps3_ehci_driver_unregister(&ps3_ehci_driver);
|
|
#endif
|
|
platform_unregister_drivers(platform_drivers, ARRAY_SIZE(platform_drivers));
|
|
#ifdef CONFIG_DYNAMIC_DEBUG
|
|
debugfs_remove(ehci_debug_root);
|
|
#endif
|
|
clear_bit(USB_EHCI_LOADED, &usb_hcds_loaded);
|
|
}
|
|
module_exit(ehci_hcd_cleanup);
|