634 lines
16 KiB
C
634 lines
16 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* phy-brcm-usb.c - Broadcom USB Phy Driver
|
|
*
|
|
* Copyright (C) 2015-2017 Broadcom
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/io.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/phy/phy.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/soc/brcmstb/brcmstb.h>
|
|
#include <dt-bindings/phy/phy.h>
|
|
#include <linux/mfd/syscon.h>
|
|
|
|
#include "phy-brcm-usb-init.h"
|
|
|
|
static DEFINE_MUTEX(sysfs_lock);
|
|
|
|
enum brcm_usb_phy_id {
|
|
BRCM_USB_PHY_2_0 = 0,
|
|
BRCM_USB_PHY_3_0,
|
|
BRCM_USB_PHY_ID_MAX
|
|
};
|
|
|
|
struct value_to_name_map {
|
|
int value;
|
|
const char *name;
|
|
};
|
|
|
|
struct match_chip_info {
|
|
void (*init_func)(struct brcm_usb_init_params *params);
|
|
u8 required_regs[BRCM_REGS_MAX + 1];
|
|
u8 optional_reg;
|
|
};
|
|
|
|
static const struct value_to_name_map brcm_dr_mode_to_name[] = {
|
|
{ USB_CTLR_MODE_HOST, "host" },
|
|
{ USB_CTLR_MODE_DEVICE, "peripheral" },
|
|
{ USB_CTLR_MODE_DRD, "drd" },
|
|
{ USB_CTLR_MODE_TYPEC_PD, "typec-pd" }
|
|
};
|
|
|
|
static const struct value_to_name_map brcm_dual_mode_to_name[] = {
|
|
{ 0, "host" },
|
|
{ 1, "device" },
|
|
{ 2, "auto" },
|
|
};
|
|
|
|
struct brcm_usb_phy {
|
|
struct phy *phy;
|
|
unsigned int id;
|
|
bool inited;
|
|
};
|
|
|
|
struct brcm_usb_phy_data {
|
|
struct brcm_usb_init_params ini;
|
|
bool has_eohci;
|
|
bool has_xhci;
|
|
struct clk *usb_20_clk;
|
|
struct clk *usb_30_clk;
|
|
struct clk *suspend_clk;
|
|
struct mutex mutex; /* serialize phy init */
|
|
int init_count;
|
|
int wake_irq;
|
|
struct brcm_usb_phy phys[BRCM_USB_PHY_ID_MAX];
|
|
};
|
|
|
|
static s8 *node_reg_names[BRCM_REGS_MAX] = {
|
|
"crtl", "xhci_ec", "xhci_gbl", "usb_phy", "usb_mdio", "bdc_ec"
|
|
};
|
|
|
|
static irqreturn_t brcm_usb_phy_wake_isr(int irq, void *dev_id)
|
|
{
|
|
struct phy *gphy = dev_id;
|
|
|
|
pm_wakeup_event(&gphy->dev, 0);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int brcm_usb_phy_init(struct phy *gphy)
|
|
{
|
|
struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
|
|
struct brcm_usb_phy_data *priv =
|
|
container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
|
|
|
|
/*
|
|
* Use a lock to make sure a second caller waits until
|
|
* the base phy is inited before using it.
|
|
*/
|
|
mutex_lock(&priv->mutex);
|
|
if (priv->init_count++ == 0) {
|
|
clk_prepare_enable(priv->usb_20_clk);
|
|
clk_prepare_enable(priv->usb_30_clk);
|
|
clk_prepare_enable(priv->suspend_clk);
|
|
brcm_usb_init_common(&priv->ini);
|
|
}
|
|
mutex_unlock(&priv->mutex);
|
|
if (phy->id == BRCM_USB_PHY_2_0)
|
|
brcm_usb_init_eohci(&priv->ini);
|
|
else if (phy->id == BRCM_USB_PHY_3_0)
|
|
brcm_usb_init_xhci(&priv->ini);
|
|
phy->inited = true;
|
|
dev_dbg(&gphy->dev, "INIT, id: %d, total: %d\n", phy->id,
|
|
priv->init_count);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_usb_phy_exit(struct phy *gphy)
|
|
{
|
|
struct brcm_usb_phy *phy = phy_get_drvdata(gphy);
|
|
struct brcm_usb_phy_data *priv =
|
|
container_of(phy, struct brcm_usb_phy_data, phys[phy->id]);
|
|
|
|
dev_dbg(&gphy->dev, "EXIT\n");
|
|
if (phy->id == BRCM_USB_PHY_2_0)
|
|
brcm_usb_uninit_eohci(&priv->ini);
|
|
if (phy->id == BRCM_USB_PHY_3_0)
|
|
brcm_usb_uninit_xhci(&priv->ini);
|
|
|
|
/* If both xhci and eohci are gone, reset everything else */
|
|
mutex_lock(&priv->mutex);
|
|
if (--priv->init_count == 0) {
|
|
brcm_usb_uninit_common(&priv->ini);
|
|
clk_disable_unprepare(priv->usb_20_clk);
|
|
clk_disable_unprepare(priv->usb_30_clk);
|
|
clk_disable_unprepare(priv->suspend_clk);
|
|
}
|
|
mutex_unlock(&priv->mutex);
|
|
phy->inited = false;
|
|
return 0;
|
|
}
|
|
|
|
static const struct phy_ops brcm_usb_phy_ops = {
|
|
.init = brcm_usb_phy_init,
|
|
.exit = brcm_usb_phy_exit,
|
|
.owner = THIS_MODULE,
|
|
};
|
|
|
|
static struct phy *brcm_usb_phy_xlate(struct device *dev,
|
|
struct of_phandle_args *args)
|
|
{
|
|
struct brcm_usb_phy_data *data = dev_get_drvdata(dev);
|
|
|
|
/*
|
|
* values 0 and 1 are for backward compatibility with
|
|
* device tree nodes from older bootloaders.
|
|
*/
|
|
switch (args->args[0]) {
|
|
case 0:
|
|
case PHY_TYPE_USB2:
|
|
if (data->phys[BRCM_USB_PHY_2_0].phy)
|
|
return data->phys[BRCM_USB_PHY_2_0].phy;
|
|
dev_warn(dev, "Error, 2.0 Phy not found\n");
|
|
break;
|
|
case 1:
|
|
case PHY_TYPE_USB3:
|
|
if (data->phys[BRCM_USB_PHY_3_0].phy)
|
|
return data->phys[BRCM_USB_PHY_3_0].phy;
|
|
dev_warn(dev, "Error, 3.0 Phy not found\n");
|
|
break;
|
|
}
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
static int name_to_value(const struct value_to_name_map *table, int count,
|
|
const char *name, int *value)
|
|
{
|
|
int x;
|
|
|
|
*value = 0;
|
|
for (x = 0; x < count; x++) {
|
|
if (sysfs_streq(name, table[x].name)) {
|
|
*value = x;
|
|
return 0;
|
|
}
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const char *value_to_name(const struct value_to_name_map *table, int count,
|
|
int value)
|
|
{
|
|
if (value >= count)
|
|
return "unknown";
|
|
return table[value].name;
|
|
}
|
|
|
|
static ssize_t dr_mode_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
|
|
|
|
return sprintf(buf, "%s\n",
|
|
value_to_name(&brcm_dr_mode_to_name[0],
|
|
ARRAY_SIZE(brcm_dr_mode_to_name),
|
|
priv->ini.mode));
|
|
}
|
|
static DEVICE_ATTR_RO(dr_mode);
|
|
|
|
static ssize_t dual_select_store(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
|
|
int value;
|
|
int res;
|
|
|
|
mutex_lock(&sysfs_lock);
|
|
res = name_to_value(&brcm_dual_mode_to_name[0],
|
|
ARRAY_SIZE(brcm_dual_mode_to_name), buf, &value);
|
|
if (!res) {
|
|
brcm_usb_set_dual_select(&priv->ini, value);
|
|
res = len;
|
|
}
|
|
mutex_unlock(&sysfs_lock);
|
|
return res;
|
|
}
|
|
|
|
static ssize_t dual_select_show(struct device *dev,
|
|
struct device_attribute *attr,
|
|
char *buf)
|
|
{
|
|
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
|
|
int value;
|
|
|
|
mutex_lock(&sysfs_lock);
|
|
value = brcm_usb_get_dual_select(&priv->ini);
|
|
mutex_unlock(&sysfs_lock);
|
|
return sprintf(buf, "%s\n",
|
|
value_to_name(&brcm_dual_mode_to_name[0],
|
|
ARRAY_SIZE(brcm_dual_mode_to_name),
|
|
value));
|
|
}
|
|
static DEVICE_ATTR_RW(dual_select);
|
|
|
|
static struct attribute *brcm_usb_phy_attrs[] = {
|
|
&dev_attr_dr_mode.attr,
|
|
&dev_attr_dual_select.attr,
|
|
NULL
|
|
};
|
|
|
|
static const struct attribute_group brcm_usb_phy_group = {
|
|
.attrs = brcm_usb_phy_attrs,
|
|
};
|
|
|
|
static const struct match_chip_info chip_info_7216 = {
|
|
.init_func = &brcm_usb_dvr_init_7216,
|
|
.required_regs = {
|
|
BRCM_REGS_CTRL,
|
|
BRCM_REGS_XHCI_EC,
|
|
BRCM_REGS_XHCI_GBL,
|
|
-1,
|
|
},
|
|
};
|
|
|
|
static const struct match_chip_info chip_info_7211b0 = {
|
|
.init_func = &brcm_usb_dvr_init_7211b0,
|
|
.required_regs = {
|
|
BRCM_REGS_CTRL,
|
|
BRCM_REGS_XHCI_EC,
|
|
BRCM_REGS_XHCI_GBL,
|
|
BRCM_REGS_USB_PHY,
|
|
BRCM_REGS_USB_MDIO,
|
|
-1,
|
|
},
|
|
.optional_reg = BRCM_REGS_BDC_EC,
|
|
};
|
|
|
|
static const struct match_chip_info chip_info_7445 = {
|
|
.init_func = &brcm_usb_dvr_init_7445,
|
|
.required_regs = {
|
|
BRCM_REGS_CTRL,
|
|
BRCM_REGS_XHCI_EC,
|
|
-1,
|
|
},
|
|
};
|
|
|
|
static const struct of_device_id brcm_usb_dt_ids[] = {
|
|
{
|
|
.compatible = "brcm,bcm4908-usb-phy",
|
|
.data = &chip_info_7445,
|
|
},
|
|
{
|
|
.compatible = "brcm,bcm7216-usb-phy",
|
|
.data = &chip_info_7216,
|
|
},
|
|
{
|
|
.compatible = "brcm,bcm7211-usb-phy",
|
|
.data = &chip_info_7211b0,
|
|
},
|
|
{
|
|
.compatible = "brcm,brcmstb-usb-phy",
|
|
.data = &chip_info_7445,
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static int brcm_usb_get_regs(struct platform_device *pdev,
|
|
enum brcmusb_reg_sel regs,
|
|
struct brcm_usb_init_params *ini,
|
|
bool optional)
|
|
{
|
|
struct resource *res;
|
|
|
|
/* Older DT nodes have ctrl and optional xhci_ec by index only */
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
|
|
node_reg_names[regs]);
|
|
if (res == NULL) {
|
|
if (regs == BRCM_REGS_CTRL) {
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
} else if (regs == BRCM_REGS_XHCI_EC) {
|
|
res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
/* XHCI_EC registers are optional */
|
|
if (res == NULL)
|
|
return 0;
|
|
}
|
|
if (res == NULL) {
|
|
if (optional) {
|
|
dev_dbg(&pdev->dev,
|
|
"Optional reg %s not found\n",
|
|
node_reg_names[regs]);
|
|
return 0;
|
|
}
|
|
dev_err(&pdev->dev, "can't get %s base addr\n",
|
|
node_reg_names[regs]);
|
|
return 1;
|
|
}
|
|
}
|
|
ini->regs[regs] = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(ini->regs[regs])) {
|
|
dev_err(&pdev->dev, "can't map %s register space\n",
|
|
node_reg_names[regs]);
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_usb_phy_dvr_init(struct platform_device *pdev,
|
|
struct brcm_usb_phy_data *priv,
|
|
struct device_node *dn)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct phy *gphy = NULL;
|
|
int err;
|
|
|
|
priv->usb_20_clk = of_clk_get_by_name(dn, "sw_usb");
|
|
if (IS_ERR(priv->usb_20_clk)) {
|
|
if (PTR_ERR(priv->usb_20_clk) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
dev_info(dev, "Clock not found in Device Tree\n");
|
|
priv->usb_20_clk = NULL;
|
|
}
|
|
err = clk_prepare_enable(priv->usb_20_clk);
|
|
if (err)
|
|
return err;
|
|
|
|
if (priv->has_eohci) {
|
|
gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
|
|
if (IS_ERR(gphy)) {
|
|
dev_err(dev, "failed to create EHCI/OHCI PHY\n");
|
|
return PTR_ERR(gphy);
|
|
}
|
|
priv->phys[BRCM_USB_PHY_2_0].phy = gphy;
|
|
priv->phys[BRCM_USB_PHY_2_0].id = BRCM_USB_PHY_2_0;
|
|
phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_2_0]);
|
|
}
|
|
|
|
if (priv->has_xhci) {
|
|
gphy = devm_phy_create(dev, NULL, &brcm_usb_phy_ops);
|
|
if (IS_ERR(gphy)) {
|
|
dev_err(dev, "failed to create XHCI PHY\n");
|
|
return PTR_ERR(gphy);
|
|
}
|
|
priv->phys[BRCM_USB_PHY_3_0].phy = gphy;
|
|
priv->phys[BRCM_USB_PHY_3_0].id = BRCM_USB_PHY_3_0;
|
|
phy_set_drvdata(gphy, &priv->phys[BRCM_USB_PHY_3_0]);
|
|
|
|
priv->usb_30_clk = of_clk_get_by_name(dn, "sw_usb3");
|
|
if (IS_ERR(priv->usb_30_clk)) {
|
|
if (PTR_ERR(priv->usb_30_clk) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
dev_info(dev,
|
|
"USB3.0 clock not found in Device Tree\n");
|
|
priv->usb_30_clk = NULL;
|
|
}
|
|
err = clk_prepare_enable(priv->usb_30_clk);
|
|
if (err)
|
|
return err;
|
|
}
|
|
|
|
priv->suspend_clk = clk_get(dev, "usb0_freerun");
|
|
if (IS_ERR(priv->suspend_clk)) {
|
|
if (PTR_ERR(priv->suspend_clk) == -EPROBE_DEFER)
|
|
return -EPROBE_DEFER;
|
|
dev_err(dev, "Suspend Clock not found in Device Tree\n");
|
|
priv->suspend_clk = NULL;
|
|
}
|
|
|
|
priv->wake_irq = platform_get_irq_byname(pdev, "wake");
|
|
if (priv->wake_irq < 0)
|
|
priv->wake_irq = platform_get_irq_byname(pdev, "wakeup");
|
|
if (priv->wake_irq >= 0) {
|
|
err = devm_request_irq(dev, priv->wake_irq,
|
|
brcm_usb_phy_wake_isr, 0,
|
|
dev_name(dev), gphy);
|
|
if (err < 0)
|
|
return err;
|
|
device_set_wakeup_capable(dev, 1);
|
|
} else {
|
|
dev_info(dev,
|
|
"Wake interrupt missing, system wake not supported\n");
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_usb_phy_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct brcm_usb_phy_data *priv;
|
|
struct phy_provider *phy_provider;
|
|
struct device_node *dn = pdev->dev.of_node;
|
|
int err;
|
|
const char *mode;
|
|
const struct match_chip_info *info;
|
|
struct regmap *rmap;
|
|
int x;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
priv->ini.family_id = brcmstb_get_family_id();
|
|
priv->ini.product_id = brcmstb_get_product_id();
|
|
|
|
info = of_device_get_match_data(&pdev->dev);
|
|
if (!info)
|
|
return -ENOENT;
|
|
|
|
info->init_func(&priv->ini);
|
|
|
|
dev_dbg(dev, "Best mapping table is for %s\n",
|
|
priv->ini.family_name);
|
|
|
|
of_property_read_u32(dn, "brcm,ipp", &priv->ini.ipp);
|
|
of_property_read_u32(dn, "brcm,ioc", &priv->ini.ioc);
|
|
|
|
priv->ini.mode = USB_CTLR_MODE_HOST;
|
|
err = of_property_read_string(dn, "dr_mode", &mode);
|
|
if (err == 0) {
|
|
name_to_value(&brcm_dr_mode_to_name[0],
|
|
ARRAY_SIZE(brcm_dr_mode_to_name),
|
|
mode, &priv->ini.mode);
|
|
}
|
|
if (of_property_read_bool(dn, "brcm,has-xhci"))
|
|
priv->has_xhci = true;
|
|
if (of_property_read_bool(dn, "brcm,has-eohci"))
|
|
priv->has_eohci = true;
|
|
|
|
for (x = 0; x < BRCM_REGS_MAX; x++) {
|
|
if (info->required_regs[x] >= BRCM_REGS_MAX)
|
|
break;
|
|
|
|
err = brcm_usb_get_regs(pdev, info->required_regs[x],
|
|
&priv->ini, false);
|
|
if (err)
|
|
return -EINVAL;
|
|
}
|
|
if (info->optional_reg) {
|
|
err = brcm_usb_get_regs(pdev, info->optional_reg,
|
|
&priv->ini, true);
|
|
if (err)
|
|
return -EINVAL;
|
|
}
|
|
|
|
err = brcm_usb_phy_dvr_init(pdev, priv, dn);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_init(&priv->mutex);
|
|
|
|
/* make sure invert settings are correct */
|
|
brcm_usb_init_ipp(&priv->ini);
|
|
|
|
/*
|
|
* Create sysfs entries for mode.
|
|
* Remove "dual_select" attribute if not in dual mode
|
|
*/
|
|
if (priv->ini.mode != USB_CTLR_MODE_DRD)
|
|
brcm_usb_phy_attrs[1] = NULL;
|
|
err = sysfs_create_group(&dev->kobj, &brcm_usb_phy_group);
|
|
if (err)
|
|
dev_warn(dev, "Error creating sysfs attributes\n");
|
|
|
|
/* Get piarbctl syscon if it exists */
|
|
rmap = syscon_regmap_lookup_by_phandle(dev->of_node,
|
|
"syscon-piarbctl");
|
|
if (IS_ERR(rmap))
|
|
rmap = syscon_regmap_lookup_by_phandle(dev->of_node,
|
|
"brcm,syscon-piarbctl");
|
|
if (!IS_ERR(rmap))
|
|
priv->ini.syscon_piarbctl = rmap;
|
|
|
|
/* start with everything off */
|
|
if (priv->has_xhci)
|
|
brcm_usb_uninit_xhci(&priv->ini);
|
|
if (priv->has_eohci)
|
|
brcm_usb_uninit_eohci(&priv->ini);
|
|
brcm_usb_uninit_common(&priv->ini);
|
|
clk_disable_unprepare(priv->usb_20_clk);
|
|
clk_disable_unprepare(priv->usb_30_clk);
|
|
|
|
phy_provider = devm_of_phy_provider_register(dev, brcm_usb_phy_xlate);
|
|
|
|
return PTR_ERR_OR_ZERO(phy_provider);
|
|
}
|
|
|
|
static int brcm_usb_phy_remove(struct platform_device *pdev)
|
|
{
|
|
sysfs_remove_group(&pdev->dev.kobj, &brcm_usb_phy_group);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int brcm_usb_phy_suspend(struct device *dev)
|
|
{
|
|
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
|
|
|
|
if (priv->init_count) {
|
|
priv->ini.wake_enabled = device_may_wakeup(dev);
|
|
if (priv->phys[BRCM_USB_PHY_3_0].inited)
|
|
brcm_usb_uninit_xhci(&priv->ini);
|
|
if (priv->phys[BRCM_USB_PHY_2_0].inited)
|
|
brcm_usb_uninit_eohci(&priv->ini);
|
|
brcm_usb_uninit_common(&priv->ini);
|
|
|
|
/*
|
|
* Handle the clocks unless needed for wake. This has
|
|
* to work for both older XHCI->3.0-clks, EOHCI->2.0-clks
|
|
* and newer XHCI->2.0-clks/3.0-clks.
|
|
*/
|
|
|
|
if (!priv->ini.suspend_with_clocks) {
|
|
if (priv->phys[BRCM_USB_PHY_3_0].inited)
|
|
clk_disable_unprepare(priv->usb_30_clk);
|
|
if (priv->phys[BRCM_USB_PHY_2_0].inited ||
|
|
!priv->has_eohci)
|
|
clk_disable_unprepare(priv->usb_20_clk);
|
|
}
|
|
if (priv->wake_irq >= 0)
|
|
enable_irq_wake(priv->wake_irq);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_usb_phy_resume(struct device *dev)
|
|
{
|
|
struct brcm_usb_phy_data *priv = dev_get_drvdata(dev);
|
|
|
|
clk_prepare_enable(priv->usb_20_clk);
|
|
clk_prepare_enable(priv->usb_30_clk);
|
|
brcm_usb_init_ipp(&priv->ini);
|
|
|
|
/*
|
|
* Initialize anything that was previously initialized.
|
|
* Uninitialize anything that wasn't previously initialized.
|
|
*/
|
|
if (priv->init_count) {
|
|
if (priv->wake_irq >= 0)
|
|
disable_irq_wake(priv->wake_irq);
|
|
brcm_usb_init_common(&priv->ini);
|
|
if (priv->phys[BRCM_USB_PHY_2_0].inited) {
|
|
brcm_usb_init_eohci(&priv->ini);
|
|
} else if (priv->has_eohci) {
|
|
brcm_usb_uninit_eohci(&priv->ini);
|
|
clk_disable_unprepare(priv->usb_20_clk);
|
|
}
|
|
if (priv->phys[BRCM_USB_PHY_3_0].inited) {
|
|
brcm_usb_init_xhci(&priv->ini);
|
|
} else if (priv->has_xhci) {
|
|
brcm_usb_uninit_xhci(&priv->ini);
|
|
clk_disable_unprepare(priv->usb_30_clk);
|
|
if (!priv->has_eohci)
|
|
clk_disable_unprepare(priv->usb_20_clk);
|
|
}
|
|
} else {
|
|
if (priv->has_xhci)
|
|
brcm_usb_uninit_xhci(&priv->ini);
|
|
if (priv->has_eohci)
|
|
brcm_usb_uninit_eohci(&priv->ini);
|
|
brcm_usb_uninit_common(&priv->ini);
|
|
clk_disable_unprepare(priv->usb_20_clk);
|
|
clk_disable_unprepare(priv->usb_30_clk);
|
|
}
|
|
priv->ini.wake_enabled = false;
|
|
return 0;
|
|
}
|
|
#endif /* CONFIG_PM_SLEEP */
|
|
|
|
static const struct dev_pm_ops brcm_usb_phy_pm_ops = {
|
|
SET_LATE_SYSTEM_SLEEP_PM_OPS(brcm_usb_phy_suspend, brcm_usb_phy_resume)
|
|
};
|
|
|
|
MODULE_DEVICE_TABLE(of, brcm_usb_dt_ids);
|
|
|
|
static struct platform_driver brcm_usb_driver = {
|
|
.probe = brcm_usb_phy_probe,
|
|
.remove = brcm_usb_phy_remove,
|
|
.driver = {
|
|
.name = "brcmstb-usb-phy",
|
|
.pm = &brcm_usb_phy_pm_ops,
|
|
.of_match_table = brcm_usb_dt_ids,
|
|
},
|
|
};
|
|
|
|
module_platform_driver(brcm_usb_driver);
|
|
|
|
MODULE_ALIAS("platform:brcmstb-usb-phy");
|
|
MODULE_AUTHOR("Al Cooper <acooper@broadcom.com>");
|
|
MODULE_DESCRIPTION("BRCM USB PHY driver");
|
|
MODULE_LICENSE("GPL v2");
|