OpenCloudOS-Kernel/drivers/phy/broadcom/phy-bcm-ns-usb3.c

248 lines
5.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Broadcom Northstar USB 3.0 PHY Driver
*
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
* Copyright (C) 2016 Broadcom
*
* All magic values used for initialization (and related comments) were obtained
* from Broadcom's SDK:
* Copyright (c) Broadcom Corp, 2012
*/
#include <linux/bcma/bcma.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/iopoll.h>
#include <linux/mdio.h>
#include <linux/module.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
#include <linux/slab.h>
#define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f
#define BCM_NS_USB3_PHY_PLL30_BLOCK 0x8000
#define BCM_NS_USB3_PHY_TX_PMD_BLOCK 0x8040
#define BCM_NS_USB3_PHY_PIPE_BLOCK 0x8060
/* Registers of PLL30 block */
#define BCM_NS_USB3_PLL_CONTROL 0x01
#define BCM_NS_USB3_PLLA_CONTROL0 0x0a
#define BCM_NS_USB3_PLLA_CONTROL1 0x0b
/* Registers of TX PMD block */
#define BCM_NS_USB3_TX_PMD_CONTROL1 0x01
/* Registers of PIPE block */
#define BCM_NS_USB3_LFPS_CMP 0x02
#define BCM_NS_USB3_LFPS_DEGLITCH 0x03
enum bcm_ns_family {
BCM_NS_UNKNOWN,
BCM_NS_AX,
BCM_NS_BX,
};
struct bcm_ns_usb3 {
struct device *dev;
enum bcm_ns_family family;
void __iomem *dmp;
struct mdio_device *mdiodev;
struct phy *phy;
};
static const struct of_device_id bcm_ns_usb3_id_table[] = {
{
.compatible = "brcm,ns-ax-usb3-phy",
.data = (int *)BCM_NS_AX,
},
{
.compatible = "brcm,ns-bx-usb3-phy",
.data = (int *)BCM_NS_BX,
},
{},
};
static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
u16 value);
static int bcm_ns_usb3_phy_init_ns_bx(struct bcm_ns_usb3 *usb3)
{
int err;
/* USB3 PLL Block */
err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
BCM_NS_USB3_PHY_PLL30_BLOCK);
if (err < 0)
return err;
/* Assert Ana_Pllseq start */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x1000);
/* Assert CML Divider ratio to 26 */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400);
/* Asserting PLL Reset */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0xc000);
/* Deaaserting PLL Reset */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000);
/* Deasserting USB3 system reset */
writel(0, usb3->dmp + BCMA_RESET_CTL);
/* PLL frequency monitor enable */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x9000);
/* PIPE Block */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
BCM_NS_USB3_PHY_PIPE_BLOCK);
/* CMPMAX & CMPMINTH setting */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_CMP, 0xf30d);
/* DEGLITCH MIN & MAX setting */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_DEGLITCH, 0x6302);
/* TXPMD block */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
BCM_NS_USB3_PHY_TX_PMD_BLOCK);
/* Enabling SSC */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
return 0;
}
static int bcm_ns_usb3_phy_init_ns_ax(struct bcm_ns_usb3 *usb3)
{
int err;
/* PLL30 block */
err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
BCM_NS_USB3_PHY_PLL30_BLOCK);
if (err < 0)
return err;
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400);
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 0x80e0);
bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x009c);
/* Enable SSC */
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
BCM_NS_USB3_PHY_TX_PMD_BLOCK);
bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x21d3);
bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
/* Deasserting USB3 system reset */
writel(0, usb3->dmp + BCMA_RESET_CTL);
return 0;
}
static int bcm_ns_usb3_phy_init(struct phy *phy)
{
struct bcm_ns_usb3 *usb3 = phy_get_drvdata(phy);
int err;
/* Perform USB3 system soft reset */
writel(BCMA_RESET_CTL_RESET, usb3->dmp + BCMA_RESET_CTL);
switch (usb3->family) {
case BCM_NS_AX:
err = bcm_ns_usb3_phy_init_ns_ax(usb3);
break;
case BCM_NS_BX:
err = bcm_ns_usb3_phy_init_ns_bx(usb3);
break;
default:
WARN_ON(1);
err = -ENOTSUPP;
}
return err;
}
static const struct phy_ops ops = {
.init = bcm_ns_usb3_phy_init,
.owner = THIS_MODULE,
};
/**************************************************
* MDIO driver code
**************************************************/
static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
u16 value)
{
struct mdio_device *mdiodev = usb3->mdiodev;
return mdiobus_write(mdiodev->bus, mdiodev->addr, reg, value);
}
static int bcm_ns_usb3_mdio_probe(struct mdio_device *mdiodev)
{
struct device *dev = &mdiodev->dev;
const struct of_device_id *of_id;
struct phy_provider *phy_provider;
struct device_node *syscon_np;
struct bcm_ns_usb3 *usb3;
struct resource res;
int err;
usb3 = devm_kzalloc(dev, sizeof(*usb3), GFP_KERNEL);
if (!usb3)
return -ENOMEM;
usb3->dev = dev;
usb3->mdiodev = mdiodev;
of_id = of_match_device(bcm_ns_usb3_id_table, dev);
if (!of_id)
return -EINVAL;
usb3->family = (enum bcm_ns_family)of_id->data;
syscon_np = of_parse_phandle(dev->of_node, "usb3-dmp-syscon", 0);
err = of_address_to_resource(syscon_np, 0, &res);
of_node_put(syscon_np);
if (err)
return err;
usb3->dmp = devm_ioremap_resource(dev, &res);
if (IS_ERR(usb3->dmp))
return PTR_ERR(usb3->dmp);
usb3->phy = devm_phy_create(dev, NULL, &ops);
if (IS_ERR(usb3->phy)) {
dev_err(dev, "Failed to create PHY\n");
return PTR_ERR(usb3->phy);
}
phy_set_drvdata(usb3->phy, usb3);
phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
return PTR_ERR_OR_ZERO(phy_provider);
}
static struct mdio_driver bcm_ns_usb3_mdio_driver = {
.mdiodrv = {
.driver = {
.name = "bcm_ns_mdio_usb3",
.of_match_table = bcm_ns_usb3_id_table,
},
},
.probe = bcm_ns_usb3_mdio_probe,
};
mdio_module_driver(bcm_ns_usb3_mdio_driver);
MODULE_LICENSE("GPL v2");
MODULE_DEVICE_TABLE(of, bcm_ns_usb3_id_table);