John Fastabend cdf485be3a ixgbe: dcb: use DCB config values for FCoE traffic class on open ... Disabling and enabling DCB can cause FCoE hardware initialization to occur on the incorrect traffic class when the up2tc mapping has not yet been reconfigured. Fix this by using the DCB configuration maps that are correct and will be pushed at mqprio after DCB driver setup completes successfully. Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>		2012-03-14 00:49:10 -07:00
..
e1000	v2 e1000: Neaten e1000_dump function	2012-02-24 02:03:43 -08:00
e1000e	e1000e: use msleep instead of mdelay	2012-02-29 23:14:19 -08:00
igb	net: Fix issue with netdev_tx_reset_queue not resetting queue from XOFF state	2012-03-12 20:16:53 -07:00
igbvf	igbvf: reset netdevice addr_assign_type if changed	2012-02-17 15:58:06 -05:00
ixgb	ixgb: Remove unnecessary defines, use pr_debug	2012-03-14 00:26:42 -07:00
ixgbe	ixgbe: dcb: use DCB config values for FCoE traffic class on open	2012-03-14 00:49:10 -07:00
ixgbevf	ixgbevf: print MAC via printk format specifier	2012-02-24 15:40:59 -05:00
Kconfig	i825xx:xscale:8390:freescale: Fix Kconfig dependancies	2011-11-04 17:41:20 -04:00
Makefile	intel: Move the Intel wired LAN drivers	2011-08-10 20:03:27 -07:00
e100.c	e100: Show short v/s long rx length errors in ethtool stats.	2012-03-02 18:09:27 -08:00