OpenCloudOS-Kernel/include/linux/mfd/dbx500-prcmu.h

647 lines
14 KiB
C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
* Copyright (C) ST Ericsson SA 2011
*
* STE Ux500 PRCMU API
*/
#ifndef __MACH_PRCMU_H
#define __MACH_PRCMU_H
#include <linux/interrupt.h>
#include <linux/notifier.h>
#include <linux/err.h>
#include <dt-bindings/mfd/dbx500-prcmu.h> /* For clock identifiers */
/* Offset for the firmware version within the TCPM */
#define DB8500_PRCMU_FW_VERSION_OFFSET 0xA4
#define DBX540_PRCMU_FW_VERSION_OFFSET 0xA8
/* PRCMU Wakeup defines */
enum prcmu_wakeup_index {
PRCMU_WAKEUP_INDEX_RTC,
PRCMU_WAKEUP_INDEX_RTT0,
PRCMU_WAKEUP_INDEX_RTT1,
PRCMU_WAKEUP_INDEX_HSI0,
PRCMU_WAKEUP_INDEX_HSI1,
PRCMU_WAKEUP_INDEX_USB,
PRCMU_WAKEUP_INDEX_ABB,
PRCMU_WAKEUP_INDEX_ABB_FIFO,
PRCMU_WAKEUP_INDEX_ARM,
PRCMU_WAKEUP_INDEX_CD_IRQ,
NUM_PRCMU_WAKEUP_INDICES
};
#define PRCMU_WAKEUP(_name) (BIT(PRCMU_WAKEUP_INDEX_##_name))
/* EPOD (power domain) IDs */
/*
* DB8500 EPODs
* - EPOD_ID_SVAMMDSP: power domain for SVA MMDSP
* - EPOD_ID_SVAPIPE: power domain for SVA pipe
* - EPOD_ID_SIAMMDSP: power domain for SIA MMDSP
* - EPOD_ID_SIAPIPE: power domain for SIA pipe
* - EPOD_ID_SGA: power domain for SGA
* - EPOD_ID_B2R2_MCDE: power domain for B2R2 and MCDE
* - EPOD_ID_ESRAM12: power domain for ESRAM 1 and 2
* - EPOD_ID_ESRAM34: power domain for ESRAM 3 and 4
* - NUM_EPOD_ID: number of power domains
*
* TODO: These should be prefixed.
*/
#define EPOD_ID_SVAMMDSP 0
#define EPOD_ID_SVAPIPE 1
#define EPOD_ID_SIAMMDSP 2
#define EPOD_ID_SIAPIPE 3
#define EPOD_ID_SGA 4
#define EPOD_ID_B2R2_MCDE 5
#define EPOD_ID_ESRAM12 6
#define EPOD_ID_ESRAM34 7
#define NUM_EPOD_ID 8
/*
* state definition for EPOD (power domain)
* - EPOD_STATE_NO_CHANGE: The EPOD should remain unchanged
* - EPOD_STATE_OFF: The EPOD is switched off
* - EPOD_STATE_RAMRET: The EPOD is switched off with its internal RAM in
* retention
* - EPOD_STATE_ON_CLK_OFF: The EPOD is switched on, clock is still off
* - EPOD_STATE_ON: Same as above, but with clock enabled
*/
#define EPOD_STATE_NO_CHANGE 0x00
#define EPOD_STATE_OFF 0x01
#define EPOD_STATE_RAMRET 0x02
#define EPOD_STATE_ON_CLK_OFF 0x03
#define EPOD_STATE_ON 0x04
/*
* CLKOUT sources
*/
#define PRCMU_CLKSRC_CLK38M 0x00
#define PRCMU_CLKSRC_ACLK 0x01
#define PRCMU_CLKSRC_SYSCLK 0x02
#define PRCMU_CLKSRC_LCDCLK 0x03
#define PRCMU_CLKSRC_SDMMCCLK 0x04
#define PRCMU_CLKSRC_TVCLK 0x05
#define PRCMU_CLKSRC_TIMCLK 0x06
#define PRCMU_CLKSRC_CLK009 0x07
/* These are only valid for CLKOUT1: */
#define PRCMU_CLKSRC_SIAMMDSPCLK 0x40
#define PRCMU_CLKSRC_I2CCLK 0x41
#define PRCMU_CLKSRC_MSP02CLK 0x42
#define PRCMU_CLKSRC_ARMPLL_OBSCLK 0x43
#define PRCMU_CLKSRC_HSIRXCLK 0x44
#define PRCMU_CLKSRC_HSITXCLK 0x45
#define PRCMU_CLKSRC_ARMCLKFIX 0x46
#define PRCMU_CLKSRC_HDMICLK 0x47
/**
* enum prcmu_wdog_id - PRCMU watchdog IDs
* @PRCMU_WDOG_ALL: use all timers
* @PRCMU_WDOG_CPU1: use first CPU timer only
* @PRCMU_WDOG_CPU2: use second CPU timer conly
*/
enum prcmu_wdog_id {
PRCMU_WDOG_ALL = 0x00,
PRCMU_WDOG_CPU1 = 0x01,
PRCMU_WDOG_CPU2 = 0x02,
};
/**
* enum ape_opp - APE OPP states definition
* @APE_OPP_INIT:
* @APE_NO_CHANGE: The APE operating point is unchanged
* @APE_100_OPP: The new APE operating point is ape100opp
* @APE_50_OPP: 50%
* @APE_50_PARTLY_25_OPP: 50%, except some clocks at 25%.
*/
enum ape_opp {
APE_OPP_INIT = 0x00,
APE_NO_CHANGE = 0x01,
APE_100_OPP = 0x02,
APE_50_OPP = 0x03,
APE_50_PARTLY_25_OPP = 0xFF,
};
/**
* enum arm_opp - ARM OPP states definition
* @ARM_OPP_INIT:
* @ARM_NO_CHANGE: The ARM operating point is unchanged
* @ARM_100_OPP: The new ARM operating point is arm100opp
* @ARM_50_OPP: The new ARM operating point is arm50opp
* @ARM_MAX_OPP: Operating point is "max" (more than 100)
* @ARM_MAX_FREQ100OPP: Set max opp if available, else 100
* @ARM_EXTCLK: The new ARM operating point is armExtClk
*/
enum arm_opp {
ARM_OPP_INIT = 0x00,
ARM_NO_CHANGE = 0x01,
ARM_100_OPP = 0x02,
ARM_50_OPP = 0x03,
ARM_MAX_OPP = 0x04,
ARM_MAX_FREQ100OPP = 0x05,
ARM_EXTCLK = 0x07
};
/**
* enum ddr_opp - DDR OPP states definition
* @DDR_100_OPP: The new DDR operating point is ddr100opp
* @DDR_50_OPP: The new DDR operating point is ddr50opp
* @DDR_25_OPP: The new DDR operating point is ddr25opp
*/
enum ddr_opp {
DDR_100_OPP = 0x00,
DDR_50_OPP = 0x01,
DDR_25_OPP = 0x02,
};
/*
* Definitions for controlling ESRAM0 in deep sleep.
*/
#define ESRAM0_DEEP_SLEEP_STATE_OFF 1
#define ESRAM0_DEEP_SLEEP_STATE_RET 2
/**
* enum ddr_pwrst - DDR power states definition
* @DDR_PWR_STATE_UNCHANGED: SDRAM and DDR controller state is unchanged
* @DDR_PWR_STATE_ON:
* @DDR_PWR_STATE_OFFLOWLAT:
* @DDR_PWR_STATE_OFFHIGHLAT:
*/
enum ddr_pwrst {
DDR_PWR_STATE_UNCHANGED = 0x00,
DDR_PWR_STATE_ON = 0x01,
DDR_PWR_STATE_OFFLOWLAT = 0x02,
DDR_PWR_STATE_OFFHIGHLAT = 0x03
};
#define DB8500_PRCMU_LEGACY_OFFSET 0xDD4
#define PRCMU_FW_PROJECT_U8500 2
#define PRCMU_FW_PROJECT_U8400 3
#define PRCMU_FW_PROJECT_U9500 4 /* Customer specific */
#define PRCMU_FW_PROJECT_U8500_MBB 5
#define PRCMU_FW_PROJECT_U8500_C1 6
#define PRCMU_FW_PROJECT_U8500_C2 7
#define PRCMU_FW_PROJECT_U8500_C3 8
#define PRCMU_FW_PROJECT_U8500_C4 9
#define PRCMU_FW_PROJECT_U9500_MBL 10
#define PRCMU_FW_PROJECT_U8500_MBL 11 /* Customer specific */
#define PRCMU_FW_PROJECT_U8500_MBL2 12 /* Customer specific */
#define PRCMU_FW_PROJECT_U8520 13
#define PRCMU_FW_PROJECT_U8420 14
#define PRCMU_FW_PROJECT_A9420 20
/* [32..63] 9540 and derivatives */
#define PRCMU_FW_PROJECT_U9540 32
/* [64..95] 8540 and derivatives */
#define PRCMU_FW_PROJECT_L8540 64
/* [96..126] 8580 and derivatives */
#define PRCMU_FW_PROJECT_L8580 96
#define PRCMU_FW_PROJECT_NAME_LEN 20
struct prcmu_fw_version {
u32 project; /* Notice, project shifted with 8 on ux540 */
u8 api_version;
u8 func_version;
u8 errata;
char project_name[PRCMU_FW_PROJECT_NAME_LEN];
};
#include <linux/mfd/db8500-prcmu.h>
#if defined(CONFIG_UX500_SOC_DB8500)
static inline void prcmu_early_init(u32 phy_base, u32 size)
{
return db8500_prcmu_early_init(phy_base, size);
}
static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
bool keep_ap_pll)
{
return db8500_prcmu_set_power_state(state, keep_ulp_clk,
keep_ap_pll);
}
static inline u8 prcmu_get_power_state_result(void)
{
return db8500_prcmu_get_power_state_result();
}
static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
{
return db8500_prcmu_set_epod(epod_id, epod_state);
}
static inline void prcmu_enable_wakeups(u32 wakeups)
{
db8500_prcmu_enable_wakeups(wakeups);
}
static inline void prcmu_disable_wakeups(void)
{
prcmu_enable_wakeups(0);
}
static inline void prcmu_config_abb_event_readout(u32 abb_events)
{
db8500_prcmu_config_abb_event_readout(abb_events);
}
static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
{
db8500_prcmu_get_abb_event_buffer(buf);
}
int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask, u8 size);
int prcmu_config_clkout(u8 clkout, u8 source, u8 div);
static inline int prcmu_request_clock(u8 clock, bool enable)
{
return db8500_prcmu_request_clock(clock, enable);
}
unsigned long prcmu_clock_rate(u8 clock);
long prcmu_round_clock_rate(u8 clock, unsigned long rate);
int prcmu_set_clock_rate(u8 clock, unsigned long rate);
static inline int prcmu_get_ddr_opp(void)
{
return db8500_prcmu_get_ddr_opp();
}
static inline int prcmu_set_arm_opp(u8 opp)
{
return db8500_prcmu_set_arm_opp(opp);
}
static inline int prcmu_get_arm_opp(void)
{
return db8500_prcmu_get_arm_opp();
}
static inline int prcmu_set_ape_opp(u8 opp)
{
return db8500_prcmu_set_ape_opp(opp);
}
static inline int prcmu_get_ape_opp(void)
{
return db8500_prcmu_get_ape_opp();
}
static inline int prcmu_request_ape_opp_100_voltage(bool enable)
{
return db8500_prcmu_request_ape_opp_100_voltage(enable);
}
static inline void prcmu_system_reset(u16 reset_code)
{
return db8500_prcmu_system_reset(reset_code);
}
static inline u16 prcmu_get_reset_code(void)
{
return db8500_prcmu_get_reset_code();
}
int prcmu_ac_wake_req(void);
void prcmu_ac_sleep_req(void);
static inline void prcmu_modem_reset(void)
{
return db8500_prcmu_modem_reset();
}
static inline bool prcmu_is_ac_wake_requested(void)
{
return db8500_prcmu_is_ac_wake_requested();
}
static inline int prcmu_set_display_clocks(void)
{
return db8500_prcmu_set_display_clocks();
}
static inline int prcmu_disable_dsipll(void)
{
return db8500_prcmu_disable_dsipll();
}
static inline int prcmu_enable_dsipll(void)
{
return db8500_prcmu_enable_dsipll();
}
static inline int prcmu_config_esram0_deep_sleep(u8 state)
{
return db8500_prcmu_config_esram0_deep_sleep(state);
}
static inline int prcmu_config_hotdog(u8 threshold)
{
return db8500_prcmu_config_hotdog(threshold);
}
static inline int prcmu_config_hotmon(u8 low, u8 high)
{
return db8500_prcmu_config_hotmon(low, high);
}
static inline int prcmu_start_temp_sense(u16 cycles32k)
{
return db8500_prcmu_start_temp_sense(cycles32k);
}
static inline int prcmu_stop_temp_sense(void)
{
return db8500_prcmu_stop_temp_sense();
}
static inline u32 prcmu_read(unsigned int reg)
{
return db8500_prcmu_read(reg);
}
static inline void prcmu_write(unsigned int reg, u32 value)
{
db8500_prcmu_write(reg, value);
}
static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value)
{
db8500_prcmu_write_masked(reg, mask, value);
}
static inline int prcmu_enable_a9wdog(u8 id)
{
return db8500_prcmu_enable_a9wdog(id);
}
static inline int prcmu_disable_a9wdog(u8 id)
{
return db8500_prcmu_disable_a9wdog(id);
}
static inline int prcmu_kick_a9wdog(u8 id)
{
return db8500_prcmu_kick_a9wdog(id);
}
static inline int prcmu_load_a9wdog(u8 id, u32 timeout)
{
return db8500_prcmu_load_a9wdog(id, timeout);
}
static inline int prcmu_config_a9wdog(u8 num, bool sleep_auto_off)
{
return db8500_prcmu_config_a9wdog(num, sleep_auto_off);
}
#else
static inline void prcmu_early_init(u32 phy_base, u32 size) {}
static inline int prcmu_set_power_state(u8 state, bool keep_ulp_clk,
bool keep_ap_pll)
{
return 0;
}
static inline int prcmu_set_epod(u16 epod_id, u8 epod_state)
{
return 0;
}
static inline void prcmu_enable_wakeups(u32 wakeups) {}
static inline void prcmu_disable_wakeups(void) {}
static inline int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size)
{
return -ENOSYS;
}
static inline int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size)
{
return -ENOSYS;
}
static inline int prcmu_abb_write_masked(u8 slave, u8 reg, u8 *value, u8 *mask,
u8 size)
{
return -ENOSYS;
}
static inline int prcmu_config_clkout(u8 clkout, u8 source, u8 div)
{
return 0;
}
static inline int prcmu_request_clock(u8 clock, bool enable)
{
return 0;
}
static inline long prcmu_round_clock_rate(u8 clock, unsigned long rate)
{
return 0;
}
static inline int prcmu_set_clock_rate(u8 clock, unsigned long rate)
{
return 0;
}
static inline unsigned long prcmu_clock_rate(u8 clock)
{
return 0;
}
static inline int prcmu_set_ape_opp(u8 opp)
{
return 0;
}
static inline int prcmu_get_ape_opp(void)
{
return APE_100_OPP;
}
static inline int prcmu_request_ape_opp_100_voltage(bool enable)
{
return 0;
}
static inline int prcmu_set_arm_opp(u8 opp)
{
return 0;
}
static inline int prcmu_get_arm_opp(void)
{
return ARM_100_OPP;
}
static inline int prcmu_get_ddr_opp(void)
{
return DDR_100_OPP;
}
static inline void prcmu_system_reset(u16 reset_code) {}
static inline u16 prcmu_get_reset_code(void)
{
return 0;
}
static inline int prcmu_ac_wake_req(void)
{
return 0;
}
static inline void prcmu_ac_sleep_req(void) {}
static inline void prcmu_modem_reset(void) {}
static inline bool prcmu_is_ac_wake_requested(void)
{
return false;
}
static inline int prcmu_set_display_clocks(void)
{
return 0;
}
static inline int prcmu_disable_dsipll(void)
{
return 0;
}
static inline int prcmu_enable_dsipll(void)
{
return 0;
}
static inline int prcmu_config_esram0_deep_sleep(u8 state)
{
return 0;
}
static inline void prcmu_config_abb_event_readout(u32 abb_events) {}
static inline void prcmu_get_abb_event_buffer(void __iomem **buf)
{
*buf = NULL;
}
static inline int prcmu_config_hotdog(u8 threshold)
{
return 0;
}
static inline int prcmu_config_hotmon(u8 low, u8 high)
{
return 0;
}
static inline int prcmu_start_temp_sense(u16 cycles32k)
{
return 0;
}
static inline int prcmu_stop_temp_sense(void)
{
return 0;
}
static inline u32 prcmu_read(unsigned int reg)
{
return 0;
}
static inline void prcmu_write(unsigned int reg, u32 value) {}
static inline void prcmu_write_masked(unsigned int reg, u32 mask, u32 value) {}
#endif
static inline void prcmu_set(unsigned int reg, u32 bits)
{
prcmu_write_masked(reg, bits, bits);
}
static inline void prcmu_clear(unsigned int reg, u32 bits)
{
prcmu_write_masked(reg, bits, 0);
}
/* PRCMU QoS APE OPP class */
#define PRCMU_QOS_APE_OPP 1
#define PRCMU_QOS_DDR_OPP 2
#define PRCMU_QOS_ARM_OPP 3
#define PRCMU_QOS_DEFAULT_VALUE -1
#ifdef CONFIG_DBX500_PRCMU_QOS_POWER
unsigned long prcmu_qos_get_cpufreq_opp_delay(void);
void prcmu_qos_set_cpufreq_opp_delay(unsigned long);
void prcmu_qos_force_opp(int, s32);
int prcmu_qos_requirement(int pm_qos_class);
int prcmu_qos_add_requirement(int pm_qos_class, char *name, s32 value);
int prcmu_qos_update_requirement(int pm_qos_class, char *name, s32 new_value);
void prcmu_qos_remove_requirement(int pm_qos_class, char *name);
int prcmu_qos_add_notifier(int prcmu_qos_class,
struct notifier_block *notifier);
int prcmu_qos_remove_notifier(int prcmu_qos_class,
struct notifier_block *notifier);
#else
static inline unsigned long prcmu_qos_get_cpufreq_opp_delay(void)
{
return 0;
}
static inline void prcmu_qos_set_cpufreq_opp_delay(unsigned long n) {}
static inline void prcmu_qos_force_opp(int prcmu_qos_class, s32 i) {}
static inline int prcmu_qos_requirement(int prcmu_qos_class)
{
return 0;
}
static inline int prcmu_qos_add_requirement(int prcmu_qos_class,
char *name, s32 value)
{
return 0;
}
static inline int prcmu_qos_update_requirement(int prcmu_qos_class,
char *name, s32 new_value)
{
return 0;
}
static inline void prcmu_qos_remove_requirement(int prcmu_qos_class, char *name)
{
}
static inline int prcmu_qos_add_notifier(int prcmu_qos_class,
struct notifier_block *notifier)
{
return 0;
}
static inline int prcmu_qos_remove_notifier(int prcmu_qos_class,
struct notifier_block *notifier)
{
return 0;
}
#endif
#endif /* __MACH_PRCMU_H */