65 lines
1.9 KiB
Plaintext
65 lines
1.9 KiB
Plaintext
Clock bindings for ST-Ericsson Ux500 clocks
|
|
|
|
Required properties :
|
|
- compatible : shall contain only one of the following:
|
|
"stericsson,u8500-clks"
|
|
"stericsson,u8540-clks"
|
|
"stericsson,u9540-clks"
|
|
- reg : shall contain base register location and length for
|
|
CLKRST1, 2, 3, 5, and 6 in an array. Note the absence of
|
|
CLKRST4, which does not exist.
|
|
|
|
Required subnodes:
|
|
- prcmu-clock: a subnode with one clock cell for PRCMU (power,
|
|
reset, control unit) clocks. The cell indicates which PRCMU
|
|
clock in the prcmu-clock node the consumer wants to use.
|
|
- prcc-periph-clock: a subnode with two clock cells for
|
|
PRCC (programmable reset- and clock controller) peripheral clocks.
|
|
The first cell indicates which PRCC block the consumer
|
|
wants to use, possible values are 1, 2, 3, 5, 6. The second
|
|
cell indicates which clock inside the PRCC block it wants,
|
|
possible values are 0 thru 31.
|
|
- prcc-kernel-clock: a subnode with two clock cells for
|
|
PRCC (programmable reset- and clock controller) kernel clocks
|
|
The first cell indicates which PRCC block the consumer
|
|
wants to use, possible values are 1, 2, 3, 5, 6. The second
|
|
cell indicates which clock inside the PRCC block it wants,
|
|
possible values are 0 thru 31.
|
|
- rtc32k-clock: a subnode with zero clock cells for the 32kHz
|
|
RTC clock.
|
|
- smp-twd-clock: a subnode for the ARM SMP Timer Watchdog cluster
|
|
with zero clock cells.
|
|
|
|
Example:
|
|
|
|
clocks {
|
|
compatible = "stericsson,u8500-clks";
|
|
/*
|
|
* Registers for the CLKRST block on peripheral
|
|
* groups 1, 2, 3, 5, 6,
|
|
*/
|
|
reg = <0x8012f000 0x1000>, <0x8011f000 0x1000>,
|
|
<0x8000f000 0x1000>, <0xa03ff000 0x1000>,
|
|
<0xa03cf000 0x1000>;
|
|
|
|
prcmu_clk: prcmu-clock {
|
|
#clock-cells = <1>;
|
|
};
|
|
|
|
prcc_pclk: prcc-periph-clock {
|
|
#clock-cells = <2>;
|
|
};
|
|
|
|
prcc_kclk: prcc-kernel-clock {
|
|
#clock-cells = <2>;
|
|
};
|
|
|
|
rtc_clk: rtc32k-clock {
|
|
#clock-cells = <0>;
|
|
};
|
|
|
|
smp_twd_clk: smp-twd-clock {
|
|
#clock-cells = <0>;
|
|
};
|
|
};
|