UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/net/wireless/ath/ath9k
History
Sujith Manoharan 47b6308b64 ath9k: Move roc completion to the offchannel timer 
Currently, when a roc period expires, the offchannel
timer calls ieee80211_remain_on_channel_expired(), but
the roc state is cleared only when the queued work
to switch to the operating channel gets a chance to run.

This race is a problem because mac80211 can issue a
new roc request in this window. To avoid this, handle
roc completion in the offchannel timer itself.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
 		2014-11-17 15:32:17 -05:00
..
Kconfig ath9k_hw: make support for PC-OEM cards optional 2014-10-27 14:16:18 -04:00
Makefile ath9k: move spectral.* to common-spectral.* 2014-11-11 16:31:14 -05:00
ahb.c ath9k: Initialize channel context ops on ahb probe 2014-07-29 10:32:57 -04:00
ani.c ath9k_hw: do not lower ANI setting below default on AR913x 2014-04-30 11:39:54 -04:00
ani.h ath9k_hw: tweak noise immunity thresholds for older chipsets 2014-03-03 15:35:55 -05:00
antenna.c ath9k: add support for reporting per-chain signal strength 2013-12-18 15:23:19 -05:00
ar953x_initvals.h ath9k: Update QCA953x initvals 2014-11-17 15:32:15 -05:00
ar955x_1p0_initvals.h ath9k: Update AR955x initvals 2014-10-27 14:16:17 -04:00
ar5008_initvals.h
…
ar5008_phy.c ath9k: set pulse_rssi threshold to 15 2014-10-30 15:24:49 -04:00
ar9001_initvals.h
…
ar9002_calib.c ath9k_hw: start initial NF calibration after PA calibration on <AR9003 2014-10-27 14:16:18 -04:00
ar9002_hw.c ath9k: Register supported HW hang checks 2014-01-03 15:36:57 -05:00
ar9002_initvals.h
…
ar9002_mac.c ath9k: fix getting tx duration for dynack 2014-09-30 13:17:48 -04:00
ar9002_phy.c ath9k: For AR9271 chipsets, set count = 0 for endless samples. 2014-11-11 16:31:14 -05:00
ar9002_phy.h ath9k: Program HW for WB195 diversity 2013-08-05 14:52:43 -04:00
ar9003_2p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9003_buffalo_initvals.h ath9k: Use a separate TX gain table for WZR-HP-G450H 2013-12-09 15:37:58 -05:00
ar9003_calib.c ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
ar9003_eeprom.c ath9k: Fix thermometer programming 2014-11-17 15:32:16 -05:00
ar9003_eeprom.h ath9k: Update BaseExtension_1 eeprom structure 2013-12-18 15:23:44 -05:00
ar9003_hw.c ath9k: Use new QCA953x initvals 2014-11-17 15:32:15 -05:00
ar9003_mac.c ath9k: fix getting tx duration for dynack 2014-09-30 13:17:48 -04:00
ar9003_mac.h
…
ar9003_mci.c ath9k: Use bitops for calibration flags 2013-09-26 15:13:47 -04:00
ar9003_mci.h
…
ar9003_paprd.c
…
ar9003_phy.c ath9k: set pulse_rssi threshold to 15 2014-10-30 15:24:49 -04:00
ar9003_phy.h ath9k: Fix regulatory compliance 2014-01-03 15:37:01 -05:00
ar9003_rtt.c ath9k: Fix PeakDetect calibration for AR9462 2013-09-26 15:13:47 -04:00
ar9003_rtt.h ath9k_hw: make support for PC-OEM cards optional 2014-10-27 14:16:18 -04:00
ar9003_wow.c ath9k: Fix wow.c compilation 2013-12-02 14:24:53 -05:00
ar9330_1p1_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9330_1p2_initvals.h ath9k_hw: update ar9300 initvals 2014-04-30 12:13:15 -04:00
ar9340_initvals.h ath9k_hw: fix worse EVM for 11b rates 2014-04-30 12:13:16 -04:00
ar9462_2p0_initvals.h ath9k: Fix ETSI compliance for AR9462 2.0 2014-02-20 15:53:20 -05:00
ar9462_2p1_initvals.h ath9k: Remove duplicate initvals for AR9462 v2.1 2013-12-02 14:25:02 -05:00
ar9485_initvals.h ath9k: Identify duplicate AR9485 initvals 2013-12-09 15:37:59 -05:00
ar9565_1p0_initvals.h ath9k: Identify duplicate AR9565 v1.0 initvals 2013-12-09 15:38:00 -05:00
ar9565_1p1_initvals.h ath9k: Add initvals for AR9565 1.1 2013-12-02 14:25:01 -05:00
ar9580_1p0_initvals.h ath9k: Update AR9580 initvals 2014-10-27 14:16:17 -04:00
ath9k.h ath9k: Adjust tbtt delta properly 2014-11-17 15:32:17 -05:00
beacon.c ath9k: Fix sequence number assignment 2014-10-08 15:24:15 -04:00
btcoex.c ath9k_hw: clean up generic timer code 2013-12-18 15:23:22 -05:00
btcoex.h
…
calib.c ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
calib.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
channel.c ath9k: Move roc completion to the offchannel timer 2014-11-17 15:32:17 -05:00
common-beacon.c Revert "ath9k: Calculate sleep duration" 2014-09-11 14:17:20 -04:00
common-beacon.h ath9k: move ath9k_beacon_config_ap common 2014-03-17 13:13:08 -04:00
common-debug.c ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-debug.h ath9k: move phy_err to ath9k_cmn_debug_phy_err 2014-05-13 15:56:42 -04:00
common-init.c ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common-init.h ath9k: move ath9k_reload_chainmask_settings to common 2014-02-28 14:33:16 -05:00
common-spectral.c ath9k: move spectral.* to common-spectral.* 2014-11-11 16:31:14 -05:00
common-spectral.h ath9k: common-spectral: don't depend from ATH9K_DEBUGFS 2014-11-17 15:32:14 -05:00
common.c ath9k|ath9k_htc: Seperate the software crypto flag for Tx and Rx 2014-11-17 15:32:15 -05:00
common.h ath9k: move spectral.* to common-spectral.* 2014-11-11 16:31:14 -05:00
debug.c ath9k: fix misc debugfs when not using chan context 2014-11-17 15:32:13 -05:00
debug.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
debug_sta.c ath9k: remove tid->paused flag 2014-04-30 11:42:35 -04:00
dfs.c ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dfs.h ath9k/ath: move dfs pattern detector to ath 2013-10-18 14:03:54 -04:00
dfs_debug.c ath9k: dfs_debug fix possible NULL dereference 2013-11-11 14:42:43 -05:00
dfs_debug.h ath9k: simplify DFS pulse interval debug printing 2014-05-29 13:08:10 -04:00
dynack.c ath9k: fix getting tx duration for dynack 2014-09-30 13:17:48 -04:00
dynack.h ath9k: add dynamic ACK timeout estimation 2014-09-16 16:18:30 -04:00
eeprom.c
…
eeprom.h
…
eeprom_4k.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom_9287.c ath9k_hw: simplify spur channel handling 2013-12-18 15:23:27 -05:00
eeprom_def.c ath9k: add support for endian swap of eeprom from platform data 2014-10-27 14:16:19 -04:00
gpio.c ath9k: Fix LED configuration 2014-11-17 15:32:16 -05:00
hif_usb.c ath9k_htc: Add device ID for Buffalo WLI-UV-AG300P 2014-02-12 15:36:04 -05:00
hif_usb.h
…
htc.h ath9k_htc: remove return of value in empty definintion of ath9k_htc_deinit_debug 2014-11-11 17:12:17 -05:00
htc_drv_beacon.c ath9k_htc: move DEFAULT_SWBA_RESPONSE check to ath9k_htc_beacon_init 2014-03-17 13:13:09 -04:00
htc_drv_debug.c ath9k_htc: add spectral scan debug interface 2014-11-11 16:31:15 -05:00
htc_drv_gpio.c ath9k_htc: reconfigure led_gpios after resume 2013-12-18 15:23:02 -05:00
htc_drv_init.c ath9k_htc: ath9k_htc_op_ps_wakeup() can be static 2014-11-17 15:32:14 -05:00
htc_drv_main.c ath9k|ath9k_htc: Seperate the software crypto flag for Tx and Rx 2014-11-17 15:32:15 -05:00
htc_drv_txrx.c ath9k_htc: process rx spectral packets 2014-11-11 16:31:15 -05:00
htc_hst.c ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
htc_hst.h ath9k_htc: catch fw panic pattern 2014-02-12 15:36:03 -05:00
hw-ops.h ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
hw.c ath9k: Store the chip chainmask in HW capabilities 2014-11-17 15:32:16 -05:00
hw.h ath9k: Store the chip chainmask in HW capabilities 2014-11-17 15:32:16 -05:00
init.c ath9k: Fix LED configuration 2014-11-17 15:32:16 -05:00
link.c ath9k: restart hardware after noise floor calibration failure 2014-10-27 14:16:18 -04:00
mac.c ath9k_hw: Abort transmission for sleeping station 2014-05-19 16:42:15 -04:00
mac.h ath9k: fix getting tx duration for dynack 2014-09-30 13:17:48 -04:00
main.c ath9k: Handle failure to send NoA 2014-11-17 15:32:16 -05:00
mci.c ath9k: Move caldata into channel context 2014-06-19 15:49:18 -04:00
mci.h
…
pci.c ath9k: Fix LED configuration 2014-11-17 15:32:16 -05:00
phy.h ath9k: Fix diversity combining for AR9285 2013-07-24 11:02:39 -04:00
recv.c ath9k: move spectral.* to common-spectral.* 2014-11-11 16:31:14 -05:00
reg.h ath9k: Enable TSF2 for generic HW timers 2014-11-17 15:32:16 -05:00
tx99.c ath9k: Unify reset API 2014-10-27 14:16:14 -04:00
wmi.c
…
wmi.h ath9k: mark wmi_event_swba as __packed 2013-09-26 15:13:48 -04:00
wow.c ath9k: Fix interface accounting 2014-09-09 15:27:21 -04:00
xmit.c ath9k: Fix sequence number assignment 2014-10-08 15:24:15 -04:00