1476 lines
40 KiB
C
1476 lines
40 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
// Copyright (c) 2015-2021, The Linux Foundation. All rights reserved.
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/init.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/device.h>
|
|
#include <linux/printk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <sound/soc.h>
|
|
#include <sound/jack.h>
|
|
#include "wcd-mbhc-v2.h"
|
|
|
|
#define HS_DETECT_PLUG_TIME_MS (3 * 1000)
|
|
#define MBHC_BUTTON_PRESS_THRESHOLD_MIN 250
|
|
#define GND_MIC_SWAP_THRESHOLD 4
|
|
#define WCD_FAKE_REMOVAL_MIN_PERIOD_MS 100
|
|
#define HPHL_CROSS_CONN_THRESHOLD 100
|
|
#define HS_VREF_MIN_VAL 1400
|
|
#define FAKE_REM_RETRY_ATTEMPTS 3
|
|
#define WCD_MBHC_ADC_HS_THRESHOLD_MV 1700
|
|
#define WCD_MBHC_ADC_HPH_THRESHOLD_MV 75
|
|
#define WCD_MBHC_ADC_MICBIAS_MV 1800
|
|
#define WCD_MBHC_FAKE_INS_RETRY 4
|
|
|
|
#define WCD_MBHC_JACK_MASK (SND_JACK_HEADSET | SND_JACK_LINEOUT | \
|
|
SND_JACK_MECHANICAL)
|
|
|
|
#define WCD_MBHC_JACK_BUTTON_MASK (SND_JACK_BTN_0 | SND_JACK_BTN_1 | \
|
|
SND_JACK_BTN_2 | SND_JACK_BTN_3 | \
|
|
SND_JACK_BTN_4 | SND_JACK_BTN_5)
|
|
|
|
enum wcd_mbhc_adc_mux_ctl {
|
|
MUX_CTL_AUTO = 0,
|
|
MUX_CTL_IN2P,
|
|
MUX_CTL_IN3P,
|
|
MUX_CTL_IN4P,
|
|
MUX_CTL_HPH_L,
|
|
MUX_CTL_HPH_R,
|
|
MUX_CTL_NONE,
|
|
};
|
|
|
|
struct wcd_mbhc {
|
|
struct device *dev;
|
|
struct snd_soc_component *component;
|
|
struct snd_soc_jack *jack;
|
|
struct wcd_mbhc_config *cfg;
|
|
const struct wcd_mbhc_cb *mbhc_cb;
|
|
const struct wcd_mbhc_intr *intr_ids;
|
|
struct wcd_mbhc_field *fields;
|
|
/* Delayed work to report long button press */
|
|
struct delayed_work mbhc_btn_dwork;
|
|
/* Work to correct accessory type */
|
|
struct work_struct correct_plug_swch;
|
|
struct mutex lock;
|
|
int buttons_pressed;
|
|
u32 hph_status; /* track headhpone status */
|
|
u8 current_plug;
|
|
bool is_btn_press;
|
|
bool in_swch_irq_handler;
|
|
bool hs_detect_work_stop;
|
|
bool is_hs_recording;
|
|
bool extn_cable_hph_rem;
|
|
bool force_linein;
|
|
bool impedance_detect;
|
|
unsigned long event_state;
|
|
unsigned long jiffies_atreport;
|
|
/* impedance of hphl and hphr */
|
|
uint32_t zl, zr;
|
|
/* Holds type of Headset - Mono/Stereo */
|
|
enum wcd_mbhc_hph_type hph_type;
|
|
/* Holds mbhc detection method - ADC/Legacy */
|
|
int mbhc_detection_logic;
|
|
};
|
|
|
|
static inline int wcd_mbhc_write_field(const struct wcd_mbhc *mbhc,
|
|
int field, int val)
|
|
{
|
|
if (!mbhc->fields[field].reg)
|
|
return 0;
|
|
|
|
return snd_soc_component_write_field(mbhc->component,
|
|
mbhc->fields[field].reg,
|
|
mbhc->fields[field].mask, val);
|
|
}
|
|
|
|
static inline int wcd_mbhc_read_field(const struct wcd_mbhc *mbhc, int field)
|
|
{
|
|
if (!mbhc->fields[field].reg)
|
|
return 0;
|
|
|
|
return snd_soc_component_read_field(mbhc->component,
|
|
mbhc->fields[field].reg,
|
|
mbhc->fields[field].mask);
|
|
}
|
|
|
|
static void wcd_program_hs_vref(struct wcd_mbhc *mbhc)
|
|
{
|
|
u32 reg_val = ((mbhc->cfg->v_hs_max - HS_VREF_MIN_VAL) / 100);
|
|
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_HS_VREF, reg_val);
|
|
}
|
|
|
|
static void wcd_program_btn_threshold(const struct wcd_mbhc *mbhc, bool micbias)
|
|
{
|
|
struct snd_soc_component *component = mbhc->component;
|
|
|
|
mbhc->mbhc_cb->set_btn_thr(component, mbhc->cfg->btn_low,
|
|
mbhc->cfg->btn_high,
|
|
mbhc->cfg->num_btn, micbias);
|
|
}
|
|
|
|
static void wcd_mbhc_curr_micbias_control(const struct wcd_mbhc *mbhc,
|
|
const enum wcd_mbhc_cs_mb_en_flag cs_mb_en)
|
|
{
|
|
|
|
/*
|
|
* Some codecs handle micbias/pullup enablement in codec
|
|
* drivers itself and micbias is not needed for regular
|
|
* plug type detection. So if micbias_control callback function
|
|
* is defined, just return.
|
|
*/
|
|
if (mbhc->mbhc_cb->mbhc_micbias_control)
|
|
return;
|
|
|
|
switch (cs_mb_en) {
|
|
case WCD_MBHC_EN_CS:
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3);
|
|
/* Program Button threshold registers as per CS */
|
|
wcd_program_btn_threshold(mbhc, false);
|
|
break;
|
|
case WCD_MBHC_EN_MB:
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
|
|
/* Disable PULL_UP_EN & enable MICBIAS */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 2);
|
|
/* Program Button threshold registers as per MICBIAS */
|
|
wcd_program_btn_threshold(mbhc, true);
|
|
break;
|
|
case WCD_MBHC_EN_PULLUP:
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 1);
|
|
/* Program Button threshold registers as per MICBIAS */
|
|
wcd_program_btn_threshold(mbhc, true);
|
|
break;
|
|
case WCD_MBHC_EN_NONE:
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 0);
|
|
break;
|
|
default:
|
|
dev_err(mbhc->dev, "%s: Invalid parameter", __func__);
|
|
break;
|
|
}
|
|
}
|
|
|
|
int wcd_mbhc_event_notify(struct wcd_mbhc *mbhc, unsigned long event)
|
|
{
|
|
|
|
struct snd_soc_component *component;
|
|
bool micbias2 = false;
|
|
|
|
if (!mbhc)
|
|
return 0;
|
|
|
|
component = mbhc->component;
|
|
|
|
if (mbhc->mbhc_cb->micbias_enable_status)
|
|
micbias2 = mbhc->mbhc_cb->micbias_enable_status(component, MIC_BIAS_2);
|
|
|
|
switch (event) {
|
|
/* MICBIAS usage change */
|
|
case WCD_EVENT_POST_DAPM_MICBIAS_2_ON:
|
|
mbhc->is_hs_recording = true;
|
|
break;
|
|
case WCD_EVENT_POST_MICBIAS_2_ON:
|
|
/* Disable current source if micbias2 enabled */
|
|
if (mbhc->mbhc_cb->mbhc_micbias_control) {
|
|
if (wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN))
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
|
|
} else {
|
|
mbhc->is_hs_recording = true;
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB);
|
|
}
|
|
break;
|
|
case WCD_EVENT_PRE_MICBIAS_2_OFF:
|
|
/*
|
|
* Before MICBIAS_2 is turned off, if FSM is enabled,
|
|
* make sure current source is enabled so as to detect
|
|
* button press/release events
|
|
*/
|
|
if (mbhc->mbhc_cb->mbhc_micbias_control/* && !mbhc->micbias_enable*/) {
|
|
if (wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN))
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3);
|
|
}
|
|
break;
|
|
/* MICBIAS usage change */
|
|
case WCD_EVENT_POST_DAPM_MICBIAS_2_OFF:
|
|
mbhc->is_hs_recording = false;
|
|
break;
|
|
case WCD_EVENT_POST_MICBIAS_2_OFF:
|
|
if (!mbhc->mbhc_cb->mbhc_micbias_control)
|
|
mbhc->is_hs_recording = false;
|
|
|
|
/* Enable PULL UP if PA's are enabled */
|
|
if ((test_bit(WCD_MBHC_EVENT_PA_HPHL, &mbhc->event_state)) ||
|
|
(test_bit(WCD_MBHC_EVENT_PA_HPHR, &mbhc->event_state)))
|
|
/* enable pullup and cs, disable mb */
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_PULLUP);
|
|
else
|
|
/* enable current source and disable mb, pullup*/
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_CS);
|
|
|
|
break;
|
|
case WCD_EVENT_POST_HPHL_PA_OFF:
|
|
clear_bit(WCD_MBHC_EVENT_PA_HPHL, &mbhc->event_state);
|
|
|
|
/* check if micbias is enabled */
|
|
if (micbias2)
|
|
/* Disable cs, pullup & enable micbias */
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB);
|
|
else
|
|
/* Disable micbias, pullup & enable cs */
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_CS);
|
|
break;
|
|
case WCD_EVENT_POST_HPHR_PA_OFF:
|
|
clear_bit(WCD_MBHC_EVENT_PA_HPHR, &mbhc->event_state);
|
|
/* check if micbias is enabled */
|
|
if (micbias2)
|
|
/* Disable cs, pullup & enable micbias */
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB);
|
|
else
|
|
/* Disable micbias, pullup & enable cs */
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_CS);
|
|
break;
|
|
case WCD_EVENT_PRE_HPHL_PA_ON:
|
|
set_bit(WCD_MBHC_EVENT_PA_HPHL, &mbhc->event_state);
|
|
/* check if micbias is enabled */
|
|
if (micbias2)
|
|
/* Disable cs, pullup & enable micbias */
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB);
|
|
else
|
|
/* Disable micbias, enable pullup & cs */
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_PULLUP);
|
|
break;
|
|
case WCD_EVENT_PRE_HPHR_PA_ON:
|
|
set_bit(WCD_MBHC_EVENT_PA_HPHR, &mbhc->event_state);
|
|
/* check if micbias is enabled */
|
|
if (micbias2)
|
|
/* Disable cs, pullup & enable micbias */
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_MB);
|
|
else
|
|
/* Disable micbias, enable pullup & cs */
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_PULLUP);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL_GPL(wcd_mbhc_event_notify);
|
|
|
|
static int wcd_cancel_btn_work(struct wcd_mbhc *mbhc)
|
|
{
|
|
return cancel_delayed_work_sync(&mbhc->mbhc_btn_dwork);
|
|
}
|
|
|
|
static void wcd_micbias_disable(struct wcd_mbhc *mbhc)
|
|
{
|
|
struct snd_soc_component *component = mbhc->component;
|
|
|
|
if (mbhc->mbhc_cb->mbhc_micbias_control)
|
|
mbhc->mbhc_cb->mbhc_micbias_control(component, MIC_BIAS_2, MICB_DISABLE);
|
|
|
|
if (mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic)
|
|
mbhc->mbhc_cb->mbhc_micb_ctrl_thr_mic(component, MIC_BIAS_2, false);
|
|
|
|
if (mbhc->mbhc_cb->set_micbias_value) {
|
|
mbhc->mbhc_cb->set_micbias_value(component);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_MICB_CTRL, 0);
|
|
}
|
|
}
|
|
|
|
static void wcd_mbhc_report_plug_removal(struct wcd_mbhc *mbhc,
|
|
enum snd_jack_types jack_type)
|
|
{
|
|
mbhc->hph_status &= ~jack_type;
|
|
/*
|
|
* cancel possibly scheduled btn work and
|
|
* report release if we reported button press
|
|
*/
|
|
if (!wcd_cancel_btn_work(mbhc) && mbhc->buttons_pressed) {
|
|
snd_soc_jack_report(mbhc->jack, 0, mbhc->buttons_pressed);
|
|
mbhc->buttons_pressed &= ~WCD_MBHC_JACK_BUTTON_MASK;
|
|
}
|
|
|
|
wcd_micbias_disable(mbhc);
|
|
mbhc->hph_type = WCD_MBHC_HPH_NONE;
|
|
mbhc->zl = mbhc->zr = 0;
|
|
snd_soc_jack_report(mbhc->jack, mbhc->hph_status, WCD_MBHC_JACK_MASK);
|
|
mbhc->current_plug = MBHC_PLUG_TYPE_NONE;
|
|
mbhc->force_linein = false;
|
|
}
|
|
|
|
static void wcd_mbhc_compute_impedance(struct wcd_mbhc *mbhc)
|
|
{
|
|
|
|
if (!mbhc->impedance_detect)
|
|
return;
|
|
|
|
if (mbhc->cfg->linein_th != 0) {
|
|
u8 fsm_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN);
|
|
/* Set MUX_CTL to AUTO for Z-det */
|
|
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, MUX_CTL_AUTO);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
|
|
mbhc->mbhc_cb->compute_impedance(mbhc->component, &mbhc->zl, &mbhc->zr);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, fsm_en);
|
|
}
|
|
}
|
|
|
|
static void wcd_mbhc_report_plug_insertion(struct wcd_mbhc *mbhc,
|
|
enum snd_jack_types jack_type)
|
|
{
|
|
bool is_pa_on;
|
|
/*
|
|
* Report removal of current jack type.
|
|
* Headphone to headset shouldn't report headphone
|
|
* removal.
|
|
*/
|
|
if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADSET &&
|
|
jack_type == SND_JACK_HEADPHONE)
|
|
mbhc->hph_status &= ~SND_JACK_HEADSET;
|
|
|
|
/* Report insertion */
|
|
switch (jack_type) {
|
|
case SND_JACK_HEADPHONE:
|
|
mbhc->current_plug = MBHC_PLUG_TYPE_HEADPHONE;
|
|
break;
|
|
case SND_JACK_HEADSET:
|
|
mbhc->current_plug = MBHC_PLUG_TYPE_HEADSET;
|
|
mbhc->jiffies_atreport = jiffies;
|
|
break;
|
|
case SND_JACK_LINEOUT:
|
|
mbhc->current_plug = MBHC_PLUG_TYPE_HIGH_HPH;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
|
|
is_pa_on = wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN);
|
|
|
|
if (!is_pa_on) {
|
|
wcd_mbhc_compute_impedance(mbhc);
|
|
if ((mbhc->zl > mbhc->cfg->linein_th) &&
|
|
(mbhc->zr > mbhc->cfg->linein_th) &&
|
|
(jack_type == SND_JACK_HEADPHONE)) {
|
|
jack_type = SND_JACK_LINEOUT;
|
|
mbhc->force_linein = true;
|
|
mbhc->current_plug = MBHC_PLUG_TYPE_HIGH_HPH;
|
|
if (mbhc->hph_status) {
|
|
mbhc->hph_status &= ~(SND_JACK_HEADSET |
|
|
SND_JACK_LINEOUT);
|
|
snd_soc_jack_report(mbhc->jack, mbhc->hph_status,
|
|
WCD_MBHC_JACK_MASK);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* Do not calculate impedance again for lineout
|
|
* as during playback pa is on and impedance values
|
|
* will not be correct resulting in lineout detected
|
|
* as headphone.
|
|
*/
|
|
if (is_pa_on && mbhc->force_linein) {
|
|
jack_type = SND_JACK_LINEOUT;
|
|
mbhc->current_plug = MBHC_PLUG_TYPE_HIGH_HPH;
|
|
if (mbhc->hph_status) {
|
|
mbhc->hph_status &= ~(SND_JACK_HEADSET |
|
|
SND_JACK_LINEOUT);
|
|
snd_soc_jack_report(mbhc->jack, mbhc->hph_status,
|
|
WCD_MBHC_JACK_MASK);
|
|
}
|
|
}
|
|
|
|
mbhc->hph_status |= jack_type;
|
|
|
|
if (jack_type == SND_JACK_HEADPHONE && mbhc->mbhc_cb->mbhc_micb_ramp_control)
|
|
mbhc->mbhc_cb->mbhc_micb_ramp_control(mbhc->component, false);
|
|
|
|
snd_soc_jack_report(mbhc->jack, (mbhc->hph_status | SND_JACK_MECHANICAL),
|
|
WCD_MBHC_JACK_MASK);
|
|
}
|
|
|
|
static void wcd_mbhc_report_plug(struct wcd_mbhc *mbhc, int insertion,
|
|
enum snd_jack_types jack_type)
|
|
{
|
|
|
|
WARN_ON(!mutex_is_locked(&mbhc->lock));
|
|
|
|
if (!insertion) /* Report removal */
|
|
wcd_mbhc_report_plug_removal(mbhc, jack_type);
|
|
else
|
|
wcd_mbhc_report_plug_insertion(mbhc, jack_type);
|
|
|
|
}
|
|
|
|
static void wcd_cancel_hs_detect_plug(struct wcd_mbhc *mbhc,
|
|
struct work_struct *work)
|
|
{
|
|
mbhc->hs_detect_work_stop = true;
|
|
mutex_unlock(&mbhc->lock);
|
|
cancel_work_sync(work);
|
|
mutex_lock(&mbhc->lock);
|
|
}
|
|
|
|
static void wcd_mbhc_cancel_pending_work(struct wcd_mbhc *mbhc)
|
|
{
|
|
/* cancel pending button press */
|
|
wcd_cancel_btn_work(mbhc);
|
|
/* cancel correct work function */
|
|
wcd_cancel_hs_detect_plug(mbhc, &mbhc->correct_plug_swch);
|
|
}
|
|
|
|
static void wcd_mbhc_elec_hs_report_unplug(struct wcd_mbhc *mbhc)
|
|
{
|
|
wcd_mbhc_cancel_pending_work(mbhc);
|
|
/* Report extension cable */
|
|
wcd_mbhc_report_plug(mbhc, 1, SND_JACK_LINEOUT);
|
|
/*
|
|
* Disable HPHL trigger and MIC Schmitt triggers.
|
|
* Setup for insertion detection.
|
|
*/
|
|
disable_irq_nosync(mbhc->intr_ids->mbhc_hs_rem_intr);
|
|
wcd_mbhc_curr_micbias_control(mbhc, WCD_MBHC_EN_NONE);
|
|
/* Disable HW FSM */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 3);
|
|
|
|
/* Set the detection type appropriately */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_DETECTION_TYPE, 1);
|
|
enable_irq(mbhc->intr_ids->mbhc_hs_ins_intr);
|
|
}
|
|
|
|
static void wcd_mbhc_find_plug_and_report(struct wcd_mbhc *mbhc,
|
|
enum wcd_mbhc_plug_type plug_type)
|
|
{
|
|
if (mbhc->current_plug == plug_type)
|
|
return;
|
|
|
|
mutex_lock(&mbhc->lock);
|
|
|
|
switch (plug_type) {
|
|
case MBHC_PLUG_TYPE_HEADPHONE:
|
|
wcd_mbhc_report_plug(mbhc, 1, SND_JACK_HEADPHONE);
|
|
break;
|
|
case MBHC_PLUG_TYPE_HEADSET:
|
|
wcd_mbhc_report_plug(mbhc, 1, SND_JACK_HEADSET);
|
|
break;
|
|
case MBHC_PLUG_TYPE_HIGH_HPH:
|
|
wcd_mbhc_report_plug(mbhc, 1, SND_JACK_LINEOUT);
|
|
break;
|
|
case MBHC_PLUG_TYPE_GND_MIC_SWAP:
|
|
if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADPHONE)
|
|
wcd_mbhc_report_plug(mbhc, 0, SND_JACK_HEADPHONE);
|
|
if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADSET)
|
|
wcd_mbhc_report_plug(mbhc, 0, SND_JACK_HEADSET);
|
|
break;
|
|
default:
|
|
WARN(1, "Unexpected current plug_type %d, plug_type %d\n",
|
|
mbhc->current_plug, plug_type);
|
|
break;
|
|
}
|
|
mutex_unlock(&mbhc->lock);
|
|
}
|
|
|
|
static void wcd_schedule_hs_detect_plug(struct wcd_mbhc *mbhc,
|
|
struct work_struct *work)
|
|
{
|
|
WARN_ON(!mutex_is_locked(&mbhc->lock));
|
|
mbhc->hs_detect_work_stop = false;
|
|
schedule_work(work);
|
|
}
|
|
|
|
static void wcd_mbhc_adc_detect_plug_type(struct wcd_mbhc *mbhc)
|
|
{
|
|
struct snd_soc_component *component = mbhc->component;
|
|
|
|
WARN_ON(!mutex_is_locked(&mbhc->lock));
|
|
|
|
if (mbhc->mbhc_cb->hph_pull_down_ctrl)
|
|
mbhc->mbhc_cb->hph_pull_down_ctrl(component, false);
|
|
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 0);
|
|
|
|
if (mbhc->mbhc_cb->mbhc_micbias_control) {
|
|
mbhc->mbhc_cb->mbhc_micbias_control(component, MIC_BIAS_2,
|
|
MICB_ENABLE);
|
|
wcd_schedule_hs_detect_plug(mbhc, &mbhc->correct_plug_swch);
|
|
}
|
|
}
|
|
|
|
static irqreturn_t wcd_mbhc_mech_plug_detect_irq(int irq, void *data)
|
|
{
|
|
struct snd_soc_component *component;
|
|
enum snd_jack_types jack_type;
|
|
struct wcd_mbhc *mbhc = data;
|
|
bool detection_type;
|
|
|
|
component = mbhc->component;
|
|
mutex_lock(&mbhc->lock);
|
|
|
|
mbhc->in_swch_irq_handler = true;
|
|
|
|
wcd_mbhc_cancel_pending_work(mbhc);
|
|
|
|
detection_type = wcd_mbhc_read_field(mbhc, WCD_MBHC_MECH_DETECTION_TYPE);
|
|
|
|
/* Set the detection type appropriately */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_MECH_DETECTION_TYPE, !detection_type);
|
|
|
|
/* Enable micbias ramp */
|
|
if (mbhc->mbhc_cb->mbhc_micb_ramp_control)
|
|
mbhc->mbhc_cb->mbhc_micb_ramp_control(component, true);
|
|
|
|
if (detection_type) {
|
|
if (mbhc->current_plug != MBHC_PLUG_TYPE_NONE)
|
|
goto exit;
|
|
/* Make sure MASTER_BIAS_CTL is enabled */
|
|
mbhc->mbhc_cb->mbhc_bias(component, true);
|
|
mbhc->is_btn_press = false;
|
|
wcd_mbhc_adc_detect_plug_type(mbhc);
|
|
} else {
|
|
/* Disable HW FSM */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
|
|
mbhc->extn_cable_hph_rem = false;
|
|
|
|
if (mbhc->current_plug == MBHC_PLUG_TYPE_NONE)
|
|
goto exit;
|
|
|
|
mbhc->is_btn_press = false;
|
|
switch (mbhc->current_plug) {
|
|
case MBHC_PLUG_TYPE_HEADPHONE:
|
|
jack_type = SND_JACK_HEADPHONE;
|
|
break;
|
|
case MBHC_PLUG_TYPE_HEADSET:
|
|
jack_type = SND_JACK_HEADSET;
|
|
break;
|
|
case MBHC_PLUG_TYPE_HIGH_HPH:
|
|
if (mbhc->mbhc_detection_logic == WCD_DETECTION_ADC)
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_ISRC_EN, 0);
|
|
jack_type = SND_JACK_LINEOUT;
|
|
break;
|
|
case MBHC_PLUG_TYPE_GND_MIC_SWAP:
|
|
dev_err(mbhc->dev, "Ground and Mic Swapped on plug\n");
|
|
goto exit;
|
|
default:
|
|
dev_err(mbhc->dev, "Invalid current plug: %d\n",
|
|
mbhc->current_plug);
|
|
goto exit;
|
|
}
|
|
disable_irq_nosync(mbhc->intr_ids->mbhc_hs_rem_intr);
|
|
disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_DETECTION_TYPE, 1);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0);
|
|
wcd_mbhc_report_plug(mbhc, 0, jack_type);
|
|
}
|
|
|
|
exit:
|
|
mbhc->in_swch_irq_handler = false;
|
|
mutex_unlock(&mbhc->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static int wcd_mbhc_get_button_mask(struct wcd_mbhc *mbhc)
|
|
{
|
|
int mask = 0;
|
|
int btn;
|
|
|
|
btn = wcd_mbhc_read_field(mbhc, WCD_MBHC_BTN_RESULT);
|
|
|
|
switch (btn) {
|
|
case 0:
|
|
mask = SND_JACK_BTN_0;
|
|
break;
|
|
case 1:
|
|
mask = SND_JACK_BTN_1;
|
|
break;
|
|
case 2:
|
|
mask = SND_JACK_BTN_2;
|
|
break;
|
|
case 3:
|
|
mask = SND_JACK_BTN_3;
|
|
break;
|
|
case 4:
|
|
mask = SND_JACK_BTN_4;
|
|
break;
|
|
case 5:
|
|
mask = SND_JACK_BTN_5;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
return mask;
|
|
}
|
|
|
|
static void wcd_btn_long_press_fn(struct work_struct *work)
|
|
{
|
|
struct delayed_work *dwork = to_delayed_work(work);
|
|
struct wcd_mbhc *mbhc = container_of(dwork, struct wcd_mbhc, mbhc_btn_dwork);
|
|
|
|
if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADSET)
|
|
snd_soc_jack_report(mbhc->jack, mbhc->buttons_pressed,
|
|
mbhc->buttons_pressed);
|
|
}
|
|
|
|
static irqreturn_t wcd_mbhc_btn_press_handler(int irq, void *data)
|
|
{
|
|
struct wcd_mbhc *mbhc = data;
|
|
int mask;
|
|
unsigned long msec_val;
|
|
|
|
mutex_lock(&mbhc->lock);
|
|
wcd_cancel_btn_work(mbhc);
|
|
mbhc->is_btn_press = true;
|
|
msec_val = jiffies_to_msecs(jiffies - mbhc->jiffies_atreport);
|
|
|
|
/* Too short, ignore button press */
|
|
if (msec_val < MBHC_BUTTON_PRESS_THRESHOLD_MIN)
|
|
goto done;
|
|
|
|
/* If switch interrupt already kicked in, ignore button press */
|
|
if (mbhc->in_swch_irq_handler)
|
|
goto done;
|
|
|
|
/* Plug isn't headset, ignore button press */
|
|
if (mbhc->current_plug != MBHC_PLUG_TYPE_HEADSET)
|
|
goto done;
|
|
|
|
mask = wcd_mbhc_get_button_mask(mbhc);
|
|
mbhc->buttons_pressed |= mask;
|
|
if (schedule_delayed_work(&mbhc->mbhc_btn_dwork, msecs_to_jiffies(400)) == 0)
|
|
WARN(1, "Button pressed twice without release event\n");
|
|
done:
|
|
mutex_unlock(&mbhc->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t wcd_mbhc_btn_release_handler(int irq, void *data)
|
|
{
|
|
struct wcd_mbhc *mbhc = data;
|
|
int ret;
|
|
|
|
mutex_lock(&mbhc->lock);
|
|
if (mbhc->is_btn_press)
|
|
mbhc->is_btn_press = false;
|
|
else /* fake btn press */
|
|
goto exit;
|
|
|
|
if (!(mbhc->buttons_pressed & WCD_MBHC_JACK_BUTTON_MASK))
|
|
goto exit;
|
|
|
|
ret = wcd_cancel_btn_work(mbhc);
|
|
if (ret == 0) { /* Reporting long button release event */
|
|
snd_soc_jack_report(mbhc->jack, 0, mbhc->buttons_pressed);
|
|
} else {
|
|
if (!mbhc->in_swch_irq_handler) {
|
|
/* Reporting btn press n Release */
|
|
snd_soc_jack_report(mbhc->jack, mbhc->buttons_pressed,
|
|
mbhc->buttons_pressed);
|
|
snd_soc_jack_report(mbhc->jack, 0, mbhc->buttons_pressed);
|
|
}
|
|
}
|
|
mbhc->buttons_pressed &= ~WCD_MBHC_JACK_BUTTON_MASK;
|
|
exit:
|
|
mutex_unlock(&mbhc->lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t wcd_mbhc_hph_ocp_irq(struct wcd_mbhc *mbhc, bool hphr)
|
|
{
|
|
|
|
/* TODO Find a better way to report this to Userspace */
|
|
dev_err(mbhc->dev, "MBHC Over Current on %s detected\n",
|
|
hphr ? "HPHR" : "HPHL");
|
|
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_OCP_FSM_EN, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_OCP_FSM_EN, 1);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t wcd_mbhc_hphl_ocp_irq(int irq, void *data)
|
|
{
|
|
return wcd_mbhc_hph_ocp_irq(data, false);
|
|
}
|
|
|
|
static irqreturn_t wcd_mbhc_hphr_ocp_irq(int irq, void *data)
|
|
{
|
|
return wcd_mbhc_hph_ocp_irq(data, true);
|
|
}
|
|
|
|
static int wcd_mbhc_initialise(struct wcd_mbhc *mbhc)
|
|
{
|
|
struct snd_soc_component *component = mbhc->component;
|
|
|
|
mutex_lock(&mbhc->lock);
|
|
|
|
/* enable HS detection */
|
|
if (mbhc->mbhc_cb->hph_pull_up_control_v2)
|
|
mbhc->mbhc_cb->hph_pull_up_control_v2(component,
|
|
HS_PULLUP_I_DEFAULT);
|
|
else if (mbhc->mbhc_cb->hph_pull_up_control)
|
|
mbhc->mbhc_cb->hph_pull_up_control(component, I_DEFAULT);
|
|
else
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_HS_L_DET_PULL_UP_CTRL, 3);
|
|
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_HPHL_PLUG_TYPE, mbhc->cfg->hphl_swh);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_GND_PLUG_TYPE, mbhc->cfg->gnd_swh);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_SW_HPH_LP_100K_TO_GND, 1);
|
|
if (mbhc->cfg->gnd_det_en && mbhc->mbhc_cb->mbhc_gnd_det_ctrl)
|
|
mbhc->mbhc_cb->mbhc_gnd_det_ctrl(component, true);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_HS_L_DET_PULL_UP_COMP_CTRL, 1);
|
|
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_L_DET_EN, 1);
|
|
|
|
/* Insertion debounce set to 96ms */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_INSREM_DBNC, 6);
|
|
|
|
/* Button Debounce set to 16ms */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_DBNC, 2);
|
|
|
|
/* enable bias */
|
|
mbhc->mbhc_cb->mbhc_bias(component, true);
|
|
/* enable MBHC clock */
|
|
if (mbhc->mbhc_cb->clk_setup)
|
|
mbhc->mbhc_cb->clk_setup(component, true);
|
|
|
|
/* program HS_VREF value */
|
|
wcd_program_hs_vref(mbhc);
|
|
|
|
wcd_program_btn_threshold(mbhc, false);
|
|
|
|
mutex_unlock(&mbhc->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wcd_mbhc_get_micbias(struct wcd_mbhc *mbhc)
|
|
{
|
|
int micbias = 0;
|
|
|
|
if (mbhc->mbhc_cb->get_micbias_val) {
|
|
mbhc->mbhc_cb->get_micbias_val(mbhc->component, &micbias);
|
|
} else {
|
|
u8 vout_ctl = 0;
|
|
/* Read MBHC Micbias (Mic Bias2) voltage */
|
|
vout_ctl = wcd_mbhc_read_field(mbhc, WCD_MBHC_MICB2_VOUT);
|
|
/* Formula for getting micbias from vout
|
|
* micbias = 1.0V + VOUT_CTL * 50mV
|
|
*/
|
|
micbias = 1000 + (vout_ctl * 50);
|
|
}
|
|
return micbias;
|
|
}
|
|
|
|
static int wcd_get_voltage_from_adc(u8 val, int micbias)
|
|
{
|
|
/* Formula for calculating voltage from ADC
|
|
* Voltage = ADC_RESULT*12.5mV*V_MICBIAS/1.8
|
|
*/
|
|
return ((val * 125 * micbias)/(WCD_MBHC_ADC_MICBIAS_MV * 10));
|
|
}
|
|
|
|
static int wcd_measure_adc_continuous(struct wcd_mbhc *mbhc)
|
|
{
|
|
u8 adc_result;
|
|
int output_mv;
|
|
int retry = 3;
|
|
u8 adc_en;
|
|
|
|
/* Pre-requisites for ADC continuous measurement */
|
|
/* Read legacy electircal detection and disable */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0x00);
|
|
/* Set ADC to continuous measurement */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 1);
|
|
/* Read ADC Enable bit to restore after adc measurement */
|
|
adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN);
|
|
/* Disable ADC_ENABLE bit */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
|
|
/* Disable MBHC FSM */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
|
|
/* Set the MUX selection to IN2P */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, MUX_CTL_IN2P);
|
|
/* Enable MBHC FSM */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
|
|
/* Enable ADC_ENABLE bit */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 1);
|
|
|
|
while (retry--) {
|
|
/* wait for 3 msec before reading ADC result */
|
|
usleep_range(3000, 3100);
|
|
adc_result = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_RESULT);
|
|
}
|
|
|
|
/* Restore ADC Enable */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, adc_en);
|
|
/* Get voltage from ADC result */
|
|
output_mv = wcd_get_voltage_from_adc(adc_result, wcd_mbhc_get_micbias(mbhc));
|
|
|
|
return output_mv;
|
|
}
|
|
|
|
static int wcd_measure_adc_once(struct wcd_mbhc *mbhc, int mux_ctl)
|
|
{
|
|
struct device *dev = mbhc->dev;
|
|
u8 adc_timeout = 0;
|
|
u8 adc_complete = 0;
|
|
u8 adc_result;
|
|
int retry = 6;
|
|
int ret;
|
|
int output_mv = 0;
|
|
u8 adc_en;
|
|
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0);
|
|
/* Read ADC Enable bit to restore after adc measurement */
|
|
adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN);
|
|
/* Trigger ADC one time measurement */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
|
|
/* Set the appropriate MUX selection */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, mux_ctl);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 1);
|
|
|
|
while (retry--) {
|
|
/* wait for 600usec to get adc results */
|
|
usleep_range(600, 610);
|
|
|
|
/* check for ADC Timeout */
|
|
adc_timeout = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_TIMEOUT);
|
|
if (adc_timeout)
|
|
continue;
|
|
|
|
/* Read ADC complete bit */
|
|
adc_complete = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_COMPLETE);
|
|
if (!adc_complete)
|
|
continue;
|
|
|
|
/* Read ADC result */
|
|
adc_result = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_RESULT);
|
|
|
|
/* Get voltage from ADC result */
|
|
output_mv = wcd_get_voltage_from_adc(adc_result,
|
|
wcd_mbhc_get_micbias(mbhc));
|
|
break;
|
|
}
|
|
|
|
/* Restore ADC Enable */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, adc_en);
|
|
|
|
if (retry <= 0) {
|
|
dev_err(dev, "%s: adc complete: %d, adc timeout: %d\n",
|
|
__func__, adc_complete, adc_timeout);
|
|
ret = -EINVAL;
|
|
} else {
|
|
ret = output_mv;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* To determine if cross connection occurred */
|
|
static int wcd_check_cross_conn(struct wcd_mbhc *mbhc)
|
|
{
|
|
u8 adc_mode, elect_ctl, adc_en, fsm_en;
|
|
int hphl_adc_res, hphr_adc_res;
|
|
bool is_cross_conn = false;
|
|
|
|
/* If PA is enabled, dont check for cross-connection */
|
|
if (wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN))
|
|
return -EINVAL;
|
|
|
|
/* Read legacy electircal detection and disable */
|
|
elect_ctl = wcd_mbhc_read_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, 0);
|
|
|
|
/* Read and set ADC to single measurement */
|
|
adc_mode = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_MODE);
|
|
/* Read ADC Enable bit to restore after adc measurement */
|
|
adc_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_ADC_EN);
|
|
/* Read FSM status */
|
|
fsm_en = wcd_mbhc_read_field(mbhc, WCD_MBHC_FSM_EN);
|
|
|
|
/* Get adc result for HPH L */
|
|
hphl_adc_res = wcd_measure_adc_once(mbhc, MUX_CTL_HPH_L);
|
|
if (hphl_adc_res < 0)
|
|
return hphl_adc_res;
|
|
|
|
/* Get adc result for HPH R in mV */
|
|
hphr_adc_res = wcd_measure_adc_once(mbhc, MUX_CTL_HPH_R);
|
|
if (hphr_adc_res < 0)
|
|
return hphr_adc_res;
|
|
|
|
if (hphl_adc_res > HPHL_CROSS_CONN_THRESHOLD ||
|
|
hphr_adc_res > HPHL_CROSS_CONN_THRESHOLD)
|
|
is_cross_conn = true;
|
|
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 0);
|
|
/* Set the MUX selection to Auto */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_MUX_CTL, MUX_CTL_AUTO);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, 1);
|
|
/* Restore ADC Enable */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, adc_en);
|
|
/* Restore ADC mode */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, adc_mode);
|
|
/* Restore FSM state */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_FSM_EN, fsm_en);
|
|
/* Restore electrical detection */
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_SCHMT_ISRC, elect_ctl);
|
|
|
|
return is_cross_conn;
|
|
}
|
|
|
|
static int wcd_mbhc_adc_get_hs_thres(struct wcd_mbhc *mbhc)
|
|
{
|
|
int hs_threshold, micbias_mv;
|
|
|
|
micbias_mv = wcd_mbhc_get_micbias(mbhc);
|
|
if (mbhc->cfg->hs_thr) {
|
|
if (mbhc->cfg->micb_mv == micbias_mv)
|
|
hs_threshold = mbhc->cfg->hs_thr;
|
|
else
|
|
hs_threshold = (mbhc->cfg->hs_thr *
|
|
micbias_mv) / mbhc->cfg->micb_mv;
|
|
} else {
|
|
hs_threshold = ((WCD_MBHC_ADC_HS_THRESHOLD_MV *
|
|
micbias_mv) / WCD_MBHC_ADC_MICBIAS_MV);
|
|
}
|
|
return hs_threshold;
|
|
}
|
|
|
|
static int wcd_mbhc_adc_get_hph_thres(struct wcd_mbhc *mbhc)
|
|
{
|
|
int hph_threshold, micbias_mv;
|
|
|
|
micbias_mv = wcd_mbhc_get_micbias(mbhc);
|
|
if (mbhc->cfg->hph_thr) {
|
|
if (mbhc->cfg->micb_mv == micbias_mv)
|
|
hph_threshold = mbhc->cfg->hph_thr;
|
|
else
|
|
hph_threshold = (mbhc->cfg->hph_thr *
|
|
micbias_mv) / mbhc->cfg->micb_mv;
|
|
} else {
|
|
hph_threshold = ((WCD_MBHC_ADC_HPH_THRESHOLD_MV *
|
|
micbias_mv) / WCD_MBHC_ADC_MICBIAS_MV);
|
|
}
|
|
return hph_threshold;
|
|
}
|
|
|
|
static void wcd_mbhc_adc_update_fsm_source(struct wcd_mbhc *mbhc,
|
|
enum wcd_mbhc_plug_type plug_type)
|
|
{
|
|
bool micbias2 = false;
|
|
|
|
switch (plug_type) {
|
|
case MBHC_PLUG_TYPE_HEADPHONE:
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3);
|
|
break;
|
|
case MBHC_PLUG_TYPE_HEADSET:
|
|
if (mbhc->mbhc_cb->micbias_enable_status)
|
|
micbias2 = mbhc->mbhc_cb->micbias_enable_status(mbhc->component,
|
|
MIC_BIAS_2);
|
|
|
|
if (!mbhc->is_hs_recording && !micbias2)
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 3);
|
|
break;
|
|
default:
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
static void wcd_mbhc_bcs_enable(struct wcd_mbhc *mbhc, int plug_type, bool enable)
|
|
{
|
|
switch (plug_type) {
|
|
case MBHC_PLUG_TYPE_HEADSET:
|
|
case MBHC_PLUG_TYPE_HEADPHONE:
|
|
if (mbhc->mbhc_cb->bcs_enable)
|
|
mbhc->mbhc_cb->bcs_enable(mbhc->component, enable);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int wcd_mbhc_get_plug_from_adc(struct wcd_mbhc *mbhc, int adc_result)
|
|
|
|
{
|
|
enum wcd_mbhc_plug_type plug_type;
|
|
u32 hph_thr, hs_thr;
|
|
|
|
hs_thr = wcd_mbhc_adc_get_hs_thres(mbhc);
|
|
hph_thr = wcd_mbhc_adc_get_hph_thres(mbhc);
|
|
|
|
if (adc_result < hph_thr)
|
|
plug_type = MBHC_PLUG_TYPE_HEADPHONE;
|
|
else if (adc_result > hs_thr)
|
|
plug_type = MBHC_PLUG_TYPE_HIGH_HPH;
|
|
else
|
|
plug_type = MBHC_PLUG_TYPE_HEADSET;
|
|
|
|
return plug_type;
|
|
}
|
|
|
|
static void wcd_correct_swch_plug(struct work_struct *work)
|
|
{
|
|
struct wcd_mbhc *mbhc;
|
|
struct snd_soc_component *component;
|
|
enum wcd_mbhc_plug_type plug_type = MBHC_PLUG_TYPE_INVALID;
|
|
unsigned long timeout;
|
|
int pt_gnd_mic_swap_cnt = 0;
|
|
int output_mv, cross_conn, hs_threshold, try = 0;
|
|
bool is_pa_on;
|
|
|
|
mbhc = container_of(work, struct wcd_mbhc, correct_plug_swch);
|
|
component = mbhc->component;
|
|
|
|
hs_threshold = wcd_mbhc_adc_get_hs_thres(mbhc);
|
|
|
|
/* Mask ADC COMPLETE interrupt */
|
|
disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr);
|
|
|
|
/* Check for cross connection */
|
|
do {
|
|
cross_conn = wcd_check_cross_conn(mbhc);
|
|
try++;
|
|
} while (try < GND_MIC_SWAP_THRESHOLD);
|
|
|
|
if (cross_conn > 0) {
|
|
plug_type = MBHC_PLUG_TYPE_GND_MIC_SWAP;
|
|
dev_err(mbhc->dev, "cross connection found, Plug type %d\n",
|
|
plug_type);
|
|
goto correct_plug_type;
|
|
}
|
|
|
|
/* Find plug type */
|
|
output_mv = wcd_measure_adc_continuous(mbhc);
|
|
plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv);
|
|
|
|
/*
|
|
* Report plug type if it is either headset or headphone
|
|
* else start the 3 sec loop
|
|
*/
|
|
switch (plug_type) {
|
|
case MBHC_PLUG_TYPE_HEADPHONE:
|
|
wcd_mbhc_find_plug_and_report(mbhc, plug_type);
|
|
break;
|
|
case MBHC_PLUG_TYPE_HEADSET:
|
|
wcd_mbhc_find_plug_and_report(mbhc, plug_type);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 1);
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
correct_plug_type:
|
|
|
|
/* Disable BCS slow insertion detection */
|
|
wcd_mbhc_bcs_enable(mbhc, plug_type, false);
|
|
|
|
timeout = jiffies + msecs_to_jiffies(HS_DETECT_PLUG_TIME_MS);
|
|
|
|
while (!time_after(jiffies, timeout)) {
|
|
if (mbhc->hs_detect_work_stop) {
|
|
wcd_micbias_disable(mbhc);
|
|
goto exit;
|
|
}
|
|
|
|
msleep(180);
|
|
/*
|
|
* Use ADC single mode to minimize the chance of missing out
|
|
* btn press/release for HEADSET type during correct work.
|
|
*/
|
|
output_mv = wcd_measure_adc_once(mbhc, MUX_CTL_IN2P);
|
|
plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv);
|
|
is_pa_on = wcd_mbhc_read_field(mbhc, WCD_MBHC_HPH_PA_EN);
|
|
|
|
if ((output_mv <= hs_threshold) && !is_pa_on) {
|
|
/* Check for cross connection*/
|
|
cross_conn = wcd_check_cross_conn(mbhc);
|
|
if (cross_conn > 0) { /* cross-connection */
|
|
pt_gnd_mic_swap_cnt++;
|
|
if (pt_gnd_mic_swap_cnt < GND_MIC_SWAP_THRESHOLD)
|
|
continue;
|
|
else
|
|
plug_type = MBHC_PLUG_TYPE_GND_MIC_SWAP;
|
|
} else if (!cross_conn) { /* no cross connection */
|
|
pt_gnd_mic_swap_cnt = 0;
|
|
plug_type = wcd_mbhc_get_plug_from_adc(mbhc, output_mv);
|
|
continue;
|
|
} else if (cross_conn < 0) /* Error */
|
|
continue;
|
|
|
|
if (pt_gnd_mic_swap_cnt == GND_MIC_SWAP_THRESHOLD) {
|
|
/* US_EU gpio present, flip switch */
|
|
if (mbhc->cfg->swap_gnd_mic) {
|
|
if (mbhc->cfg->swap_gnd_mic(component, true))
|
|
continue;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (output_mv > hs_threshold) /* cable is extension cable */
|
|
plug_type = MBHC_PLUG_TYPE_HIGH_HPH;
|
|
}
|
|
|
|
wcd_mbhc_bcs_enable(mbhc, plug_type, true);
|
|
|
|
if (plug_type == MBHC_PLUG_TYPE_HIGH_HPH)
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ELECT_ISRC_EN, 1);
|
|
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
|
|
wcd_mbhc_find_plug_and_report(mbhc, plug_type);
|
|
|
|
/*
|
|
* Set DETECTION_DONE bit for HEADSET
|
|
* so that btn press/release interrupt can be generated.
|
|
* For other plug type, clear the bit.
|
|
*/
|
|
if (plug_type == MBHC_PLUG_TYPE_HEADSET)
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 1);
|
|
else
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 0);
|
|
|
|
if (mbhc->mbhc_cb->mbhc_micbias_control)
|
|
wcd_mbhc_adc_update_fsm_source(mbhc, plug_type);
|
|
|
|
exit:
|
|
if (mbhc->mbhc_cb->mbhc_micbias_control/* && !mbhc->micbias_enable*/)
|
|
mbhc->mbhc_cb->mbhc_micbias_control(component, MIC_BIAS_2, MICB_DISABLE);
|
|
|
|
/*
|
|
* If plug type is corrected from special headset to headphone,
|
|
* clear the micbias enable flag, set micbias back to 1.8V and
|
|
* disable micbias.
|
|
*/
|
|
if (plug_type == MBHC_PLUG_TYPE_HEADPHONE) {
|
|
wcd_micbias_disable(mbhc);
|
|
/*
|
|
* Enable ADC COMPLETE interrupt for HEADPHONE.
|
|
* Btn release may happen after the correct work, ADC COMPLETE
|
|
* interrupt needs to be captured to correct plug type.
|
|
*/
|
|
enable_irq(mbhc->intr_ids->mbhc_hs_ins_intr);
|
|
}
|
|
|
|
if (mbhc->mbhc_cb->hph_pull_down_ctrl)
|
|
mbhc->mbhc_cb->hph_pull_down_ctrl(component, true);
|
|
}
|
|
|
|
static irqreturn_t wcd_mbhc_adc_hs_rem_irq(int irq, void *data)
|
|
{
|
|
struct wcd_mbhc *mbhc = data;
|
|
unsigned long timeout;
|
|
int adc_threshold, output_mv, retry = 0;
|
|
bool hphpa_on = false;
|
|
|
|
mutex_lock(&mbhc->lock);
|
|
timeout = jiffies + msecs_to_jiffies(WCD_FAKE_REMOVAL_MIN_PERIOD_MS);
|
|
adc_threshold = wcd_mbhc_adc_get_hs_thres(mbhc);
|
|
|
|
do {
|
|
retry++;
|
|
/*
|
|
* read output_mv every 10ms to look for
|
|
* any change in IN2_P
|
|
*/
|
|
usleep_range(10000, 10100);
|
|
output_mv = wcd_measure_adc_once(mbhc, MUX_CTL_IN2P);
|
|
|
|
/* Check for fake removal */
|
|
if ((output_mv <= adc_threshold) && retry > FAKE_REM_RETRY_ATTEMPTS)
|
|
goto exit;
|
|
} while (!time_after(jiffies, timeout));
|
|
|
|
/*
|
|
* ADC COMPLETE and ELEC_REM interrupts are both enabled for
|
|
* HEADPHONE, need to reject the ADC COMPLETE interrupt which
|
|
* follows ELEC_REM one when HEADPHONE is removed.
|
|
*/
|
|
if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADPHONE)
|
|
mbhc->extn_cable_hph_rem = true;
|
|
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_MODE, 0);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_ADC_EN, 0);
|
|
wcd_mbhc_elec_hs_report_unplug(mbhc);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_BTN_ISRC_CTL, 0);
|
|
|
|
if (hphpa_on) {
|
|
hphpa_on = false;
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_HPH_PA_EN, 3);
|
|
}
|
|
exit:
|
|
mutex_unlock(&mbhc->lock);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static irqreturn_t wcd_mbhc_adc_hs_ins_irq(int irq, void *data)
|
|
{
|
|
struct wcd_mbhc *mbhc = data;
|
|
u8 clamp_state = 0;
|
|
u8 clamp_retry = WCD_MBHC_FAKE_INS_RETRY;
|
|
|
|
/*
|
|
* ADC COMPLETE and ELEC_REM interrupts are both enabled for HEADPHONE,
|
|
* need to reject the ADC COMPLETE interrupt which follows ELEC_REM one
|
|
* when HEADPHONE is removed.
|
|
*/
|
|
if (mbhc->extn_cable_hph_rem == true) {
|
|
mbhc->extn_cable_hph_rem = false;
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
do {
|
|
clamp_state = wcd_mbhc_read_field(mbhc, WCD_MBHC_IN2P_CLAMP_STATE);
|
|
if (clamp_state)
|
|
return IRQ_HANDLED;
|
|
/*
|
|
* check clamp for 120ms but at 30ms chunks to leave
|
|
* room for other interrupts to be processed
|
|
*/
|
|
usleep_range(30000, 30100);
|
|
} while (--clamp_retry);
|
|
|
|
/*
|
|
* If current plug is headphone then there is no chance to
|
|
* get ADC complete interrupt, so connected cable should be
|
|
* headset not headphone.
|
|
*/
|
|
if (mbhc->current_plug == MBHC_PLUG_TYPE_HEADPHONE) {
|
|
disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr);
|
|
wcd_mbhc_write_field(mbhc, WCD_MBHC_DETECTION_DONE, 1);
|
|
wcd_mbhc_find_plug_and_report(mbhc, MBHC_PLUG_TYPE_HEADSET);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
int wcd_mbhc_get_impedance(struct wcd_mbhc *mbhc, uint32_t *zl, uint32_t *zr)
|
|
{
|
|
*zl = mbhc->zl;
|
|
*zr = mbhc->zr;
|
|
|
|
if (*zl && *zr)
|
|
return 0;
|
|
else
|
|
return -EINVAL;
|
|
}
|
|
EXPORT_SYMBOL(wcd_mbhc_get_impedance);
|
|
|
|
void wcd_mbhc_set_hph_type(struct wcd_mbhc *mbhc, int hph_type)
|
|
{
|
|
mbhc->hph_type = hph_type;
|
|
}
|
|
EXPORT_SYMBOL(wcd_mbhc_set_hph_type);
|
|
|
|
int wcd_mbhc_get_hph_type(struct wcd_mbhc *mbhc)
|
|
{
|
|
return mbhc->hph_type;
|
|
}
|
|
EXPORT_SYMBOL(wcd_mbhc_get_hph_type);
|
|
|
|
int wcd_mbhc_start(struct wcd_mbhc *mbhc, struct wcd_mbhc_config *cfg,
|
|
struct snd_soc_jack *jack)
|
|
{
|
|
if (!mbhc || !cfg || !jack)
|
|
return -EINVAL;
|
|
|
|
mbhc->cfg = cfg;
|
|
mbhc->jack = jack;
|
|
|
|
return wcd_mbhc_initialise(mbhc);
|
|
}
|
|
EXPORT_SYMBOL(wcd_mbhc_start);
|
|
|
|
void wcd_mbhc_stop(struct wcd_mbhc *mbhc)
|
|
{
|
|
mbhc->current_plug = MBHC_PLUG_TYPE_NONE;
|
|
mbhc->hph_status = 0;
|
|
disable_irq_nosync(mbhc->intr_ids->hph_left_ocp);
|
|
disable_irq_nosync(mbhc->intr_ids->hph_right_ocp);
|
|
}
|
|
EXPORT_SYMBOL(wcd_mbhc_stop);
|
|
|
|
int wcd_dt_parse_mbhc_data(struct device *dev, struct wcd_mbhc_config *cfg)
|
|
{
|
|
struct device_node *np = dev->of_node;
|
|
int ret, i, microvolt;
|
|
|
|
if (of_property_read_bool(np, "qcom,hphl-jack-type-normally-closed"))
|
|
cfg->hphl_swh = false;
|
|
else
|
|
cfg->hphl_swh = true;
|
|
|
|
if (of_property_read_bool(np, "qcom,ground-jack-type-normally-closed"))
|
|
cfg->gnd_swh = false;
|
|
else
|
|
cfg->gnd_swh = true;
|
|
|
|
ret = of_property_read_u32(np, "qcom,mbhc-headset-vthreshold-microvolt",
|
|
µvolt);
|
|
if (ret)
|
|
dev_dbg(dev, "missing qcom,mbhc-hs-mic-max-vthreshold--microvolt in dt node\n");
|
|
else
|
|
cfg->hs_thr = microvolt/1000;
|
|
|
|
ret = of_property_read_u32(np, "qcom,mbhc-headphone-vthreshold-microvolt",
|
|
µvolt);
|
|
if (ret)
|
|
dev_dbg(dev, "missing qcom,mbhc-hs-mic-min-vthreshold-microvolt entry\n");
|
|
else
|
|
cfg->hph_thr = microvolt/1000;
|
|
|
|
ret = of_property_read_u32_array(np,
|
|
"qcom,mbhc-buttons-vthreshold-microvolt",
|
|
&cfg->btn_high[0],
|
|
WCD_MBHC_DEF_BUTTONS);
|
|
if (ret)
|
|
dev_err(dev, "missing qcom,mbhc-buttons-vthreshold-microvolt entry\n");
|
|
|
|
for (i = 0; i < WCD_MBHC_DEF_BUTTONS; i++) {
|
|
if (ret) /* default voltage */
|
|
cfg->btn_high[i] = 500000;
|
|
else
|
|
/* Micro to Milli Volts */
|
|
cfg->btn_high[i] = cfg->btn_high[i]/1000;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
EXPORT_SYMBOL(wcd_dt_parse_mbhc_data);
|
|
|
|
struct wcd_mbhc *wcd_mbhc_init(struct snd_soc_component *component,
|
|
const struct wcd_mbhc_cb *mbhc_cb,
|
|
const struct wcd_mbhc_intr *intr_ids,
|
|
struct wcd_mbhc_field *fields,
|
|
bool impedance_det_en)
|
|
{
|
|
struct device *dev = component->dev;
|
|
struct wcd_mbhc *mbhc;
|
|
int ret;
|
|
|
|
if (!intr_ids || !fields || !mbhc_cb || !mbhc_cb->mbhc_bias || !mbhc_cb->set_btn_thr) {
|
|
dev_err(dev, "%s: Insufficient mbhc configuration\n", __func__);
|
|
return ERR_PTR(-EINVAL);
|
|
}
|
|
|
|
mbhc = devm_kzalloc(dev, sizeof(*mbhc), GFP_KERNEL);
|
|
if (!mbhc)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
mbhc->component = component;
|
|
mbhc->dev = dev;
|
|
mbhc->intr_ids = intr_ids;
|
|
mbhc->mbhc_cb = mbhc_cb;
|
|
mbhc->fields = fields;
|
|
mbhc->mbhc_detection_logic = WCD_DETECTION_ADC;
|
|
|
|
if (mbhc_cb->compute_impedance)
|
|
mbhc->impedance_detect = impedance_det_en;
|
|
|
|
INIT_DELAYED_WORK(&mbhc->mbhc_btn_dwork, wcd_btn_long_press_fn);
|
|
|
|
mutex_init(&mbhc->lock);
|
|
|
|
INIT_WORK(&mbhc->correct_plug_swch, wcd_correct_swch_plug);
|
|
|
|
ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_sw_intr, NULL,
|
|
wcd_mbhc_mech_plug_detect_irq,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_RISING,
|
|
"mbhc sw intr", mbhc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_btn_press_intr, NULL,
|
|
wcd_mbhc_btn_press_handler,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_RISING,
|
|
"Button Press detect", mbhc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_btn_release_intr, NULL,
|
|
wcd_mbhc_btn_release_handler,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_RISING,
|
|
"Button Release detect", mbhc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_hs_ins_intr, NULL,
|
|
wcd_mbhc_adc_hs_ins_irq,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_RISING,
|
|
"Elect Insert", mbhc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
disable_irq_nosync(mbhc->intr_ids->mbhc_hs_ins_intr);
|
|
|
|
ret = devm_request_threaded_irq(dev, mbhc->intr_ids->mbhc_hs_rem_intr, NULL,
|
|
wcd_mbhc_adc_hs_rem_irq,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_RISING,
|
|
"Elect Remove", mbhc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
disable_irq_nosync(mbhc->intr_ids->mbhc_hs_rem_intr);
|
|
|
|
ret = devm_request_threaded_irq(dev, mbhc->intr_ids->hph_left_ocp, NULL,
|
|
wcd_mbhc_hphl_ocp_irq,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_RISING,
|
|
"HPH_L OCP detect", mbhc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
ret = devm_request_threaded_irq(dev, mbhc->intr_ids->hph_right_ocp, NULL,
|
|
wcd_mbhc_hphr_ocp_irq,
|
|
IRQF_ONESHOT | IRQF_TRIGGER_RISING,
|
|
"HPH_R OCP detect", mbhc);
|
|
if (ret)
|
|
goto err;
|
|
|
|
return mbhc;
|
|
err:
|
|
dev_err(dev, "Failed to request mbhc interrupts %d\n", ret);
|
|
|
|
return ERR_PTR(ret);
|
|
}
|
|
EXPORT_SYMBOL(wcd_mbhc_init);
|
|
|
|
void wcd_mbhc_deinit(struct wcd_mbhc *mbhc)
|
|
{
|
|
mutex_lock(&mbhc->lock);
|
|
wcd_cancel_hs_detect_plug(mbhc, &mbhc->correct_plug_swch);
|
|
mutex_unlock(&mbhc->lock);
|
|
}
|
|
EXPORT_SYMBOL(wcd_mbhc_deinit);
|
|
|
|
static int __init mbhc_init(void)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static void __exit mbhc_exit(void)
|
|
{
|
|
}
|
|
|
|
module_init(mbhc_init);
|
|
module_exit(mbhc_exit);
|
|
|
|
MODULE_DESCRIPTION("wcd MBHC v2 module");
|
|
MODULE_LICENSE("GPL");
|