OpenCloudOS-Kernel/drivers/clk/Kconfig

209 lines
6.0 KiB
Plaintext

config CLKDEV_LOOKUP
bool
select HAVE_CLK
config HAVE_CLK_PREPARE
bool
config COMMON_CLK
bool
select HAVE_CLK_PREPARE
select CLKDEV_LOOKUP
select SRCU
select RATIONAL
---help---
The common clock framework is a single definition of struct
clk, useful across many platforms, as well as an
implementation of the clock API in include/linux/clk.h.
Architectures utilizing the common struct clk should select
this option.
menu "Common Clock Framework"
depends on COMMON_CLK
config COMMON_CLK_WM831X
tristate "Clock driver for WM831x/2x PMICs"
depends on MFD_WM831X
---help---
Supports the clocking subsystem of the WM831x/2x series of
PMICs from Wolfson Microelectronics.
source "drivers/clk/versatile/Kconfig"
config COMMON_CLK_MAX_GEN
bool
config COMMON_CLK_MAX77686
tristate "Clock driver for Maxim 77686 MFD"
depends on MFD_MAX77686
select COMMON_CLK_MAX_GEN
---help---
This driver supports Maxim 77686 crystal oscillator clock.
config COMMON_CLK_MAX77802
tristate "Clock driver for Maxim 77802 PMIC"
depends on MFD_MAX77686
select COMMON_CLK_MAX_GEN
---help---
This driver supports Maxim 77802 crystal oscillator clock.
config COMMON_CLK_RK808
tristate "Clock driver for RK808"
depends on MFD_RK808
---help---
This driver supports RK808 crystal oscillator clock. These
multi-function devices have two fixed-rate oscillators,
clocked at 32KHz each. Clkout1 is always on, Clkout2 can off
by control register.
config COMMON_CLK_SCPI
tristate "Clock driver controlled via SCPI interface"
depends on ARM_SCPI_PROTOCOL || COMPILE_TEST
---help---
This driver provides support for clocks that are controlled
by firmware that implements the SCPI interface.
This driver uses SCPI Message Protocol to interact with the
firmware providing all the clock controls.
config COMMON_CLK_SI5351
tristate "Clock driver for SiLabs 5351A/B/C"
depends on I2C
select REGMAP_I2C
select RATIONAL
---help---
This driver supports Silicon Labs 5351A/B/C programmable clock
generators.
config COMMON_CLK_SI514
tristate "Clock driver for SiLabs 514 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
---help---
This driver supports the Silicon Labs 514 programmable clock
generator.
config COMMON_CLK_SI570
tristate "Clock driver for SiLabs 570 and compatible devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
---help---
This driver supports Silicon Labs 570/571/598/599 programmable
clock generators.
config COMMON_CLK_CDCE706
tristate "Clock driver for TI CDCE706 clock synthesizer"
depends on I2C
select REGMAP_I2C
select RATIONAL
---help---
This driver supports TI CDCE706 programmable 3-PLL clock synthesizer.
config COMMON_CLK_CDCE925
tristate "Clock driver for TI CDCE925 devices"
depends on I2C
depends on OF
select REGMAP_I2C
help
---help---
This driver supports the TI CDCE925 programmable clock synthesizer.
The chip contains two PLLs with spread-spectrum clocking support and
five output dividers. The driver only supports the following setup,
and uses a fixed setting for the output muxes.
Y1 is derived from the input clock
Y2 and Y3 derive from PLL1
Y4 and Y5 derive from PLL2
Given a target output frequency, the driver will set the PLL and
divider to best approximate the desired output.
config COMMON_CLK_CS2000_CP
tristate "Clock driver for CS2000 Fractional-N Clock Synthesizer & Clock Multiplier"
depends on I2C
help
If you say yes here you get support for the CS2000 clock multiplier.
config COMMON_CLK_S2MPS11
tristate "Clock driver for S2MPS1X/S5M8767 MFD"
depends on MFD_SEC_CORE
---help---
This driver supports S2MPS11/S2MPS14/S5M8767 crystal oscillator
clock. These multi-function devices have two (S2MPS14) or three
(S2MPS11, S5M8767) fixed-rate oscillators, clocked at 32KHz each.
config CLK_TWL6040
tristate "External McPDM functional clock from twl6040"
depends on TWL6040_CORE
---help---
Enable the external functional clock support on OMAP4+ platforms for
McPDM. McPDM module is using the external bit clock on the McPDM bus
as functional clock.
config COMMON_CLK_AXI_CLKGEN
tristate "AXI clkgen driver"
depends on ARCH_ZYNQ || MICROBLAZE || COMPILE_TEST
help
---help---
Support for the Analog Devices axi-clkgen pcore clock generator for Xilinx
FPGAs. It is commonly used in Analog Devices' reference designs.
config CLK_QORIQ
bool "Clock driver for Freescale QorIQ platforms"
depends on (PPC_E500MC || ARM || ARM64 || COMPILE_TEST) && OF
---help---
This adds the clock driver support for Freescale QorIQ platforms
using common clock framework.
config COMMON_CLK_XGENE
bool "Clock driver for APM XGene SoC"
default y
depends on ARM64 || COMPILE_TEST
---help---
Sypport for the APM X-Gene SoC reference, PLL, and device clocks.
config COMMON_CLK_KEYSTONE
tristate "Clock drivers for Keystone based SOCs"
depends on (ARCH_KEYSTONE || COMPILE_TEST) && OF
---help---
Supports clock drivers for Keystone based SOCs. These SOCs have local
a power sleep control module that gate the clock to the IPs and PLLs.
config COMMON_CLK_NXP
def_bool COMMON_CLK && (ARCH_LPC18XX || ARCH_LPC32XX)
select REGMAP_MMIO if ARCH_LPC32XX
---help---
Support for clock providers on NXP platforms.
config COMMON_CLK_PALMAS
tristate "Clock driver for TI Palmas devices"
depends on MFD_PALMAS
---help---
This driver supports TI Palmas devices 32KHz output KG and KG_AUDIO
using common clock framework.
config COMMON_CLK_PWM
tristate "Clock driver for PWMs used as clock outputs"
depends on PWM
---help---
Adapter driver so that any PWM output can be (mis)used as clock signal
at 50% duty cycle.
config COMMON_CLK_PXA
def_bool COMMON_CLK && ARCH_PXA
---help---
Support for the Marvell PXA SoC.
source "drivers/clk/bcm/Kconfig"
source "drivers/clk/hisilicon/Kconfig"
source "drivers/clk/mvebu/Kconfig"
source "drivers/clk/qcom/Kconfig"
source "drivers/clk/samsung/Kconfig"
source "drivers/clk/tegra/Kconfig"
source "drivers/clk/ti/Kconfig"
endmenu