199 lines
5.8 KiB
C
199 lines
5.8 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/***************************************************************************/
|
|
|
|
/*
|
|
* m520x.c -- platform support for ColdFire 520x based boards
|
|
*
|
|
* Copyright (C) 2005, Freescale (www.freescale.com)
|
|
* Copyright (C) 2005, Intec Automation (mike@steroidmicros.com)
|
|
* Copyright (C) 1999-2007, Greg Ungerer (gerg@snapgear.com)
|
|
* Copyright (C) 2001-2003, SnapGear Inc. (www.snapgear.com)
|
|
*/
|
|
|
|
/***************************************************************************/
|
|
|
|
#include <linux/clkdev.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/param.h>
|
|
#include <linux/init.h>
|
|
#include <linux/io.h>
|
|
#include <asm/machdep.h>
|
|
#include <asm/coldfire.h>
|
|
#include <asm/mcfsim.h>
|
|
#include <asm/mcfuart.h>
|
|
#include <asm/mcfclk.h>
|
|
|
|
/***************************************************************************/
|
|
|
|
DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
|
|
DEFINE_CLK(0, "fec.0", 12, MCF_CLK);
|
|
DEFINE_CLK(0, "edma", 17, MCF_CLK);
|
|
DEFINE_CLK(0, "intc.0", 18, MCF_CLK);
|
|
DEFINE_CLK(0, "iack.0", 21, MCF_CLK);
|
|
DEFINE_CLK(0, "imx1-i2c.0", 22, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfqspi.0", 23, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfuart.0", 24, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "mcfuart.1", 25, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "mcfuart.2", 26, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "mcftmr.0", 28, MCF_CLK);
|
|
DEFINE_CLK(0, "mcftmr.1", 29, MCF_CLK);
|
|
DEFINE_CLK(0, "mcftmr.2", 30, MCF_CLK);
|
|
DEFINE_CLK(0, "mcftmr.3", 31, MCF_CLK);
|
|
|
|
DEFINE_CLK(0, "mcfpit.0", 32, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfpit.1", 33, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfeport.0", 34, MCF_CLK);
|
|
DEFINE_CLK(0, "mcfwdt.0", 35, MCF_CLK);
|
|
DEFINE_CLK(0, "pll.0", 36, MCF_CLK);
|
|
DEFINE_CLK(0, "sys.0", 40, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "gpio.0", 41, MCF_BUSCLK);
|
|
DEFINE_CLK(0, "sdram.0", 42, MCF_CLK);
|
|
|
|
static struct clk_lookup m520x_clk_lookup[] = {
|
|
CLKDEV_INIT(NULL, "flexbus", &__clk_0_2),
|
|
CLKDEV_INIT("fec.0", NULL, &__clk_0_12),
|
|
CLKDEV_INIT("edma", NULL, &__clk_0_17),
|
|
CLKDEV_INIT("intc.0", NULL, &__clk_0_18),
|
|
CLKDEV_INIT("iack.0", NULL, &__clk_0_21),
|
|
CLKDEV_INIT("imx1-i2c.0", NULL, &__clk_0_22),
|
|
CLKDEV_INIT("mcfqspi.0", NULL, &__clk_0_23),
|
|
CLKDEV_INIT("mcfuart.0", NULL, &__clk_0_24),
|
|
CLKDEV_INIT("mcfuart.1", NULL, &__clk_0_25),
|
|
CLKDEV_INIT("mcfuart.2", NULL, &__clk_0_26),
|
|
CLKDEV_INIT("mcftmr.0", NULL, &__clk_0_28),
|
|
CLKDEV_INIT("mcftmr.1", NULL, &__clk_0_29),
|
|
CLKDEV_INIT("mcftmr.2", NULL, &__clk_0_30),
|
|
CLKDEV_INIT("mcftmr.3", NULL, &__clk_0_31),
|
|
CLKDEV_INIT("mcfpit.0", NULL, &__clk_0_32),
|
|
CLKDEV_INIT("mcfpit.1", NULL, &__clk_0_33),
|
|
CLKDEV_INIT("mcfeport.0", NULL, &__clk_0_34),
|
|
CLKDEV_INIT("mcfwdt.0", NULL, &__clk_0_35),
|
|
CLKDEV_INIT(NULL, "pll.0", &__clk_0_36),
|
|
CLKDEV_INIT(NULL, "sys.0", &__clk_0_40),
|
|
CLKDEV_INIT("gpio.0", NULL, &__clk_0_41),
|
|
CLKDEV_INIT("sdram.0", NULL, &__clk_0_42),
|
|
};
|
|
|
|
static struct clk * const enable_clks[] __initconst = {
|
|
&__clk_0_2, /* flexbus */
|
|
&__clk_0_18, /* intc.0 */
|
|
&__clk_0_21, /* iack.0 */
|
|
&__clk_0_24, /* mcfuart.0 */
|
|
&__clk_0_25, /* mcfuart.1 */
|
|
&__clk_0_26, /* mcfuart.2 */
|
|
|
|
&__clk_0_32, /* mcfpit.0 */
|
|
&__clk_0_33, /* mcfpit.1 */
|
|
&__clk_0_34, /* mcfeport.0 */
|
|
&__clk_0_36, /* pll.0 */
|
|
&__clk_0_40, /* sys.0 */
|
|
&__clk_0_41, /* gpio.0 */
|
|
&__clk_0_42, /* sdram.0 */
|
|
};
|
|
|
|
static struct clk * const disable_clks[] __initconst = {
|
|
&__clk_0_12, /* fec.0 */
|
|
&__clk_0_17, /* edma */
|
|
&__clk_0_22, /* imx1-i2c.0 */
|
|
&__clk_0_23, /* mcfqspi.0 */
|
|
&__clk_0_28, /* mcftmr.0 */
|
|
&__clk_0_29, /* mcftmr.1 */
|
|
&__clk_0_30, /* mcftmr.2 */
|
|
&__clk_0_31, /* mcftmr.3 */
|
|
&__clk_0_35, /* mcfwdt.0 */
|
|
};
|
|
|
|
|
|
static void __init m520x_clk_init(void)
|
|
{
|
|
unsigned i;
|
|
|
|
/* make sure these clocks are enabled */
|
|
for (i = 0; i < ARRAY_SIZE(enable_clks); ++i)
|
|
__clk_init_enabled(enable_clks[i]);
|
|
/* make sure these clocks are disabled */
|
|
for (i = 0; i < ARRAY_SIZE(disable_clks); ++i)
|
|
__clk_init_disabled(disable_clks[i]);
|
|
|
|
clkdev_add_table(m520x_clk_lookup, ARRAY_SIZE(m520x_clk_lookup));
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m520x_qspi_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI)
|
|
u16 par;
|
|
/* setup Port QS for QSPI with gpio CS control */
|
|
writeb(0x3f, MCF_GPIO_PAR_QSPI);
|
|
/* make U1CTS and U2RTS gpio for cs_control */
|
|
par = readw(MCF_GPIO_PAR_UART);
|
|
par &= 0x00ff;
|
|
writew(par, MCF_GPIO_PAR_UART);
|
|
#endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m520x_i2c_init(void)
|
|
{
|
|
#if IS_ENABLED(CONFIG_I2C_IMX)
|
|
u8 par;
|
|
|
|
/* setup Port FECI2C Pin Assignment Register for I2C */
|
|
/* set PAR_SCL to SCL and PAR_SDA to SDA */
|
|
par = readb(MCF_GPIO_PAR_FECI2C);
|
|
par |= 0x0f;
|
|
writeb(par, MCF_GPIO_PAR_FECI2C);
|
|
#endif /* IS_ENABLED(CONFIG_I2C_IMX) */
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m520x_uarts_init(void)
|
|
{
|
|
u16 par;
|
|
u8 par2;
|
|
|
|
/* UART0 and UART1 GPIO pin setup */
|
|
par = readw(MCF_GPIO_PAR_UART);
|
|
par |= MCF_GPIO_PAR_UART_PAR_UTXD0 | MCF_GPIO_PAR_UART_PAR_URXD0;
|
|
par |= MCF_GPIO_PAR_UART_PAR_UTXD1 | MCF_GPIO_PAR_UART_PAR_URXD1;
|
|
writew(par, MCF_GPIO_PAR_UART);
|
|
|
|
/* UART1 GPIO pin setup */
|
|
par2 = readb(MCF_GPIO_PAR_FECI2C);
|
|
par2 &= ~0x0F;
|
|
par2 |= MCF_GPIO_PAR_FECI2C_PAR_SCL_UTXD2 |
|
|
MCF_GPIO_PAR_FECI2C_PAR_SDA_URXD2;
|
|
writeb(par2, MCF_GPIO_PAR_FECI2C);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
static void __init m520x_fec_init(void)
|
|
{
|
|
u8 v;
|
|
|
|
/* Set multi-function pins to ethernet mode */
|
|
v = readb(MCF_GPIO_PAR_FEC);
|
|
writeb(v | 0xf0, MCF_GPIO_PAR_FEC);
|
|
|
|
v = readb(MCF_GPIO_PAR_FECI2C);
|
|
writeb(v | 0x0f, MCF_GPIO_PAR_FECI2C);
|
|
}
|
|
|
|
/***************************************************************************/
|
|
|
|
void __init config_BSP(char *commandp, int size)
|
|
{
|
|
mach_sched_init = hw_timer_init;
|
|
m520x_clk_init();
|
|
m520x_uarts_init();
|
|
m520x_fec_init();
|
|
m520x_qspi_init();
|
|
m520x_i2c_init();
|
|
}
|
|
|
|
/***************************************************************************/
|