328 lines
11 KiB
C
328 lines
11 KiB
C
/* SPDX-License-Identifier: GPL-2.0-only */
|
|
/*
|
|
* ChromeOS EC multi-function device
|
|
*
|
|
* Copyright (C) 2012 Google, Inc
|
|
*/
|
|
|
|
#ifndef __LINUX_MFD_CROS_EC_H
|
|
#define __LINUX_MFD_CROS_EC_H
|
|
|
|
#include <linux/cdev.h>
|
|
#include <linux/device.h>
|
|
#include <linux/notifier.h>
|
|
#include <linux/mfd/cros_ec_commands.h>
|
|
#include <linux/mutex.h>
|
|
|
|
#define CROS_EC_DEV_NAME "cros_ec"
|
|
#define CROS_EC_DEV_FP_NAME "cros_fp"
|
|
#define CROS_EC_DEV_PD_NAME "cros_pd"
|
|
#define CROS_EC_DEV_TP_NAME "cros_tp"
|
|
#define CROS_EC_DEV_ISH_NAME "cros_ish"
|
|
#define CROS_EC_DEV_SCP_NAME "cros_scp"
|
|
|
|
/*
|
|
* The EC is unresponsive for a time after a reboot command. Add a
|
|
* simple delay to make sure that the bus stays locked.
|
|
*/
|
|
#define EC_REBOOT_DELAY_MS 50
|
|
|
|
/*
|
|
* Max bus-specific overhead incurred by request/responses.
|
|
* I2C requires 1 additional byte for requests.
|
|
* I2C requires 2 additional bytes for responses.
|
|
* SPI requires up to 32 additional bytes for responses.
|
|
*/
|
|
#define EC_PROTO_VERSION_UNKNOWN 0
|
|
#define EC_MAX_REQUEST_OVERHEAD 1
|
|
#define EC_MAX_RESPONSE_OVERHEAD 32
|
|
|
|
/*
|
|
* Command interface between EC and AP, for LPC, I2C and SPI interfaces.
|
|
*/
|
|
enum {
|
|
EC_MSG_TX_HEADER_BYTES = 3,
|
|
EC_MSG_TX_TRAILER_BYTES = 1,
|
|
EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES +
|
|
EC_MSG_TX_TRAILER_BYTES,
|
|
EC_MSG_RX_PROTO_BYTES = 3,
|
|
|
|
/* Max length of messages for proto 2*/
|
|
EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE +
|
|
EC_MSG_TX_PROTO_BYTES,
|
|
|
|
EC_MAX_MSG_BYTES = 64 * 1024,
|
|
};
|
|
|
|
/**
|
|
* struct cros_ec_command - Information about a ChromeOS EC command.
|
|
* @version: Command version number (often 0).
|
|
* @command: Command to send (EC_CMD_...).
|
|
* @outsize: Outgoing length in bytes.
|
|
* @insize: Max number of bytes to accept from the EC.
|
|
* @result: EC's response to the command (separate from communication failure).
|
|
* @data: Where to put the incoming data from EC and outgoing data to EC.
|
|
*/
|
|
struct cros_ec_command {
|
|
uint32_t version;
|
|
uint32_t command;
|
|
uint32_t outsize;
|
|
uint32_t insize;
|
|
uint32_t result;
|
|
uint8_t data[0];
|
|
};
|
|
|
|
/**
|
|
* struct cros_ec_device - Information about a ChromeOS EC device.
|
|
* @phys_name: Name of physical comms layer (e.g. 'i2c-4').
|
|
* @dev: Device pointer for physical comms device
|
|
* @was_wake_device: True if this device was set to wake the system from
|
|
* sleep at the last suspend.
|
|
* @cros_class: The class structure for this device.
|
|
* @cmd_readmem: Direct read of the EC memory-mapped region, if supported.
|
|
* @offset: Is within EC_LPC_ADDR_MEMMAP region.
|
|
* @bytes: Number of bytes to read. zero means "read a string" (including
|
|
* the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be
|
|
* read. Caller must ensure that the buffer is large enough for the
|
|
* result when reading a string.
|
|
* @max_request: Max size of message requested.
|
|
* @max_response: Max size of message response.
|
|
* @max_passthru: Max sice of passthru message.
|
|
* @proto_version: The protocol version used for this device.
|
|
* @priv: Private data.
|
|
* @irq: Interrupt to use.
|
|
* @id: Device id.
|
|
* @din: Input buffer (for data from EC). This buffer will always be
|
|
* dword-aligned and include enough space for up to 7 word-alignment
|
|
* bytes also, so we can ensure that the body of the message is always
|
|
* dword-aligned (64-bit). We use this alignment to keep ARM and x86
|
|
* happy. Probably word alignment would be OK, there might be a small
|
|
* performance advantage to using dword.
|
|
* @dout: Output buffer (for data to EC). This buffer will always be
|
|
* dword-aligned and include enough space for up to 7 word-alignment
|
|
* bytes also, so we can ensure that the body of the message is always
|
|
* dword-aligned (64-bit). We use this alignment to keep ARM and x86
|
|
* happy. Probably word alignment would be OK, there might be a small
|
|
* performance advantage to using dword.
|
|
* @din_size: Size of din buffer to allocate (zero to use static din).
|
|
* @dout_size: Size of dout buffer to allocate (zero to use static dout).
|
|
* @wake_enabled: True if this device can wake the system from sleep.
|
|
* @suspended: True if this device had been suspended.
|
|
* @cmd_xfer: Send command to EC and get response.
|
|
* Returns the number of bytes received if the communication
|
|
* succeeded, but that doesn't mean the EC was happy with the
|
|
* command. The caller should check msg.result for the EC's result
|
|
* code.
|
|
* @pkt_xfer: Send packet to EC and get response.
|
|
* @lock: One transaction at a time.
|
|
* @mkbp_event_supported: True if this EC supports the MKBP event protocol.
|
|
* @host_sleep_v1: True if this EC supports the sleep v1 command.
|
|
* @event_notifier: Interrupt event notifier for transport devices.
|
|
* @event_data: Raw payload transferred with the MKBP event.
|
|
* @event_size: Size in bytes of the event data.
|
|
* @host_event_wake_mask: Mask of host events that cause wake from suspend.
|
|
*/
|
|
struct cros_ec_device {
|
|
/* These are used by other drivers that want to talk to the EC */
|
|
const char *phys_name;
|
|
struct device *dev;
|
|
bool was_wake_device;
|
|
struct class *cros_class;
|
|
int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset,
|
|
unsigned int bytes, void *dest);
|
|
|
|
/* These are used to implement the platform-specific interface */
|
|
u16 max_request;
|
|
u16 max_response;
|
|
u16 max_passthru;
|
|
u16 proto_version;
|
|
void *priv;
|
|
int irq;
|
|
u8 *din;
|
|
u8 *dout;
|
|
int din_size;
|
|
int dout_size;
|
|
bool wake_enabled;
|
|
bool suspended;
|
|
int (*cmd_xfer)(struct cros_ec_device *ec,
|
|
struct cros_ec_command *msg);
|
|
int (*pkt_xfer)(struct cros_ec_device *ec,
|
|
struct cros_ec_command *msg);
|
|
struct mutex lock;
|
|
bool mkbp_event_supported;
|
|
bool host_sleep_v1;
|
|
struct blocking_notifier_head event_notifier;
|
|
|
|
struct ec_response_get_next_event_v1 event_data;
|
|
int event_size;
|
|
u32 host_event_wake_mask;
|
|
u32 last_resume_result;
|
|
};
|
|
|
|
/**
|
|
* struct cros_ec_sensor_platform - ChromeOS EC sensor platform information.
|
|
* @sensor_num: Id of the sensor, as reported by the EC.
|
|
*/
|
|
struct cros_ec_sensor_platform {
|
|
u8 sensor_num;
|
|
};
|
|
|
|
/**
|
|
* struct cros_ec_platform - ChromeOS EC platform information.
|
|
* @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...)
|
|
* used in /dev/ and sysfs.
|
|
* @cmd_offset: Offset to apply for each command. Set when
|
|
* registering a device behind another one.
|
|
*/
|
|
struct cros_ec_platform {
|
|
const char *ec_name;
|
|
u16 cmd_offset;
|
|
};
|
|
|
|
struct cros_ec_debugfs;
|
|
|
|
/**
|
|
* struct cros_ec_dev - ChromeOS EC device entry point.
|
|
* @class_dev: Device structure used in sysfs.
|
|
* @cdev: Character device structure in /dev.
|
|
* @ec_dev: cros_ec_device structure to talk to the physical device.
|
|
* @dev: Pointer to the platform device.
|
|
* @debug_info: cros_ec_debugfs structure for debugging information.
|
|
* @has_kb_wake_angle: True if at least 2 accelerometer are connected to the EC.
|
|
* @cmd_offset: Offset to apply for each command.
|
|
* @features: Features supported by the EC.
|
|
*/
|
|
struct cros_ec_dev {
|
|
struct device class_dev;
|
|
struct cdev cdev;
|
|
struct cros_ec_device *ec_dev;
|
|
struct device *dev;
|
|
struct cros_ec_debugfs *debug_info;
|
|
bool has_kb_wake_angle;
|
|
u16 cmd_offset;
|
|
u32 features[2];
|
|
};
|
|
|
|
#define to_cros_ec_dev(dev) container_of(dev, struct cros_ec_dev, class_dev)
|
|
|
|
/**
|
|
* cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device.
|
|
* @ec_dev: Device to suspend.
|
|
*
|
|
* This can be called by drivers to handle a suspend event.
|
|
*
|
|
* Return: 0 on success or negative error code.
|
|
*/
|
|
int cros_ec_suspend(struct cros_ec_device *ec_dev);
|
|
|
|
/**
|
|
* cros_ec_resume() - Handle a resume operation for the ChromeOS EC device.
|
|
* @ec_dev: Device to resume.
|
|
*
|
|
* This can be called by drivers to handle a resume event.
|
|
*
|
|
* Return: 0 on success or negative error code.
|
|
*/
|
|
int cros_ec_resume(struct cros_ec_device *ec_dev);
|
|
|
|
/**
|
|
* cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer.
|
|
* @ec_dev: Device to register.
|
|
* @msg: Message to write.
|
|
*
|
|
* This is intended to be used by all ChromeOS EC drivers, but at present
|
|
* only SPI uses it. Once LPC uses the same protocol it can start using it.
|
|
* I2C could use it now, with a refactor of the existing code.
|
|
*
|
|
* Return: 0 on success or negative error code.
|
|
*/
|
|
int cros_ec_prepare_tx(struct cros_ec_device *ec_dev,
|
|
struct cros_ec_command *msg);
|
|
|
|
/**
|
|
* cros_ec_check_result() - Check ec_msg->result.
|
|
* @ec_dev: EC device.
|
|
* @msg: Message to check.
|
|
*
|
|
* This is used by ChromeOS EC drivers to check the ec_msg->result for
|
|
* errors and to warn about them.
|
|
*
|
|
* Return: 0 on success or negative error code.
|
|
*/
|
|
int cros_ec_check_result(struct cros_ec_device *ec_dev,
|
|
struct cros_ec_command *msg);
|
|
|
|
/**
|
|
* cros_ec_cmd_xfer() - Send a command to the ChromeOS EC.
|
|
* @ec_dev: EC device.
|
|
* @msg: Message to write.
|
|
*
|
|
* Call this to send a command to the ChromeOS EC. This should be used
|
|
* instead of calling the EC's cmd_xfer() callback directly.
|
|
*
|
|
* Return: 0 on success or negative error code.
|
|
*/
|
|
int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
|
|
struct cros_ec_command *msg);
|
|
|
|
/**
|
|
* cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC.
|
|
* @ec_dev: EC device.
|
|
* @msg: Message to write.
|
|
*
|
|
* This function is identical to cros_ec_cmd_xfer, except it returns success
|
|
* status only if both the command was transmitted successfully and the EC
|
|
* replied with success status. It's not necessary to check msg->result when
|
|
* using this function.
|
|
*
|
|
* Return: The number of bytes transferred on success or negative error code.
|
|
*/
|
|
int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
|
|
struct cros_ec_command *msg);
|
|
|
|
/**
|
|
* cros_ec_register() - Register a new ChromeOS EC, using the provided info.
|
|
* @ec_dev: Device to register.
|
|
*
|
|
* Before calling this, allocate a pointer to a new device and then fill
|
|
* in all the fields up to the --private-- marker.
|
|
*
|
|
* Return: 0 on success or negative error code.
|
|
*/
|
|
int cros_ec_register(struct cros_ec_device *ec_dev);
|
|
|
|
/**
|
|
* cros_ec_query_all() - Query the protocol version supported by the
|
|
* ChromeOS EC.
|
|
* @ec_dev: Device to register.
|
|
*
|
|
* Return: 0 on success or negative error code.
|
|
*/
|
|
int cros_ec_query_all(struct cros_ec_device *ec_dev);
|
|
|
|
/**
|
|
* cros_ec_get_next_event() - Fetch next event from the ChromeOS EC.
|
|
* @ec_dev: Device to fetch event from.
|
|
* @wake_event: Pointer to a bool set to true upon return if the event might be
|
|
* treated as a wake event. Ignored if null.
|
|
*
|
|
* Return: negative error code on errors; 0 for no data; or else number of
|
|
* bytes received (i.e., an event was retrieved successfully). Event types are
|
|
* written out to @ec_dev->event_data.event_type on success.
|
|
*/
|
|
int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
|
|
|
|
/**
|
|
* cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC.
|
|
* @ec_dev: Device to fetch event from.
|
|
*
|
|
* When MKBP is supported, when the EC raises an interrupt, we collect the
|
|
* events raised and call the functions in the ec notifier. This function
|
|
* is a helper to know which events are raised.
|
|
*
|
|
* Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*.
|
|
*/
|
|
u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
|
|
|
|
#endif /* __LINUX_MFD_CROS_EC_H */
|