1951 lines
50 KiB
C
1951 lines
50 KiB
C
|
|
/* Advanced Micro Devices Inc. AMD8111E Linux Network Driver
|
|
* Copyright (C) 2004 Advanced Micro Devices
|
|
*
|
|
*
|
|
* Copyright 2001,2002 Jeff Garzik <jgarzik@mandrakesoft.com> [ 8139cp.c,tg3.c ]
|
|
* Copyright (C) 2001, 2002 David S. Miller (davem@redhat.com)[ tg3.c]
|
|
* Copyright 1996-1999 Thomas Bogendoerfer [ pcnet32.c ]
|
|
* Derived from the lance driver written 1993,1994,1995 by Donald Becker.
|
|
* Copyright 1993 United States Government as represented by the
|
|
* Director, National Security Agency.[ pcnet32.c ]
|
|
* Carsten Langgaard, carstenl@mips.com [ pcnet32.c ]
|
|
* Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved.
|
|
*
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
|
|
Module Name:
|
|
|
|
amd8111e.c
|
|
|
|
Abstract:
|
|
|
|
AMD8111 based 10/100 Ethernet Controller Driver.
|
|
|
|
Environment:
|
|
|
|
Kernel Mode
|
|
|
|
Revision History:
|
|
3.0.0
|
|
Initial Revision.
|
|
3.0.1
|
|
1. Dynamic interrupt coalescing.
|
|
2. Removed prev_stats.
|
|
3. MII support.
|
|
4. Dynamic IPG support
|
|
3.0.2 05/29/2003
|
|
1. Bug fix: Fixed failure to send jumbo packets larger than 4k.
|
|
2. Bug fix: Fixed VLAN support failure.
|
|
3. Bug fix: Fixed receive interrupt coalescing bug.
|
|
4. Dynamic IPG support is disabled by default.
|
|
3.0.3 06/05/2003
|
|
1. Bug fix: Fixed failure to close the interface if SMP is enabled.
|
|
3.0.4 12/09/2003
|
|
1. Added set_mac_address routine for bonding driver support.
|
|
2. Tested the driver for bonding support
|
|
3. Bug fix: Fixed mismach in actual receive buffer lenth and lenth
|
|
indicated to the h/w.
|
|
4. Modified amd8111e_rx() routine to receive all the received packets
|
|
in the first interrupt.
|
|
5. Bug fix: Corrected rx_errors reported in get_stats() function.
|
|
3.0.5 03/22/2004
|
|
1. Added NAPI support
|
|
|
|
*/
|
|
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/types.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/if_vlan.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/crc32.h>
|
|
#include <linux/dma-mapping.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/byteorder.h>
|
|
#include <linux/uaccess.h>
|
|
|
|
#if IS_ENABLED(CONFIG_VLAN_8021Q)
|
|
#define AMD8111E_VLAN_TAG_USED 1
|
|
#else
|
|
#define AMD8111E_VLAN_TAG_USED 0
|
|
#endif
|
|
|
|
#include "amd8111e.h"
|
|
#define MODULE_NAME "amd8111e"
|
|
#define MODULE_VERS "3.0.7"
|
|
MODULE_AUTHOR("Advanced Micro Devices, Inc.");
|
|
MODULE_DESCRIPTION ("AMD8111 based 10/100 Ethernet Controller. Driver Version "MODULE_VERS);
|
|
MODULE_LICENSE("GPL");
|
|
module_param_array(speed_duplex, int, NULL, 0);
|
|
MODULE_PARM_DESC(speed_duplex, "Set device speed and duplex modes, 0: Auto Negotiate, 1: 10Mbps Half Duplex, 2: 10Mbps Full Duplex, 3: 100Mbps Half Duplex, 4: 100Mbps Full Duplex");
|
|
module_param_array(coalesce, bool, NULL, 0);
|
|
MODULE_PARM_DESC(coalesce, "Enable or Disable interrupt coalescing, 1: Enable, 0: Disable");
|
|
module_param_array(dynamic_ipg, bool, NULL, 0);
|
|
MODULE_PARM_DESC(dynamic_ipg, "Enable or Disable dynamic IPG, 1: Enable, 0: Disable");
|
|
|
|
/* This function will read the PHY registers. */
|
|
static int amd8111e_read_phy(struct amd8111e_priv *lp,
|
|
int phy_id, int reg, u32 *val)
|
|
{
|
|
void __iomem *mmio = lp->mmio;
|
|
unsigned int reg_val;
|
|
unsigned int repeat= REPEAT_CNT;
|
|
|
|
reg_val = readl(mmio + PHY_ACCESS);
|
|
while (reg_val & PHY_CMD_ACTIVE)
|
|
reg_val = readl( mmio + PHY_ACCESS );
|
|
|
|
writel( PHY_RD_CMD | ((phy_id & 0x1f) << 21) |
|
|
((reg & 0x1f) << 16), mmio +PHY_ACCESS);
|
|
do{
|
|
reg_val = readl(mmio + PHY_ACCESS);
|
|
udelay(30); /* It takes 30 us to read/write data */
|
|
} while (--repeat && (reg_val & PHY_CMD_ACTIVE));
|
|
if(reg_val & PHY_RD_ERR)
|
|
goto err_phy_read;
|
|
|
|
*val = reg_val & 0xffff;
|
|
return 0;
|
|
err_phy_read:
|
|
*val = 0;
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
/* This function will write into PHY registers. */
|
|
static int amd8111e_write_phy(struct amd8111e_priv *lp,
|
|
int phy_id, int reg, u32 val)
|
|
{
|
|
unsigned int repeat = REPEAT_CNT;
|
|
void __iomem *mmio = lp->mmio;
|
|
unsigned int reg_val;
|
|
|
|
reg_val = readl(mmio + PHY_ACCESS);
|
|
while (reg_val & PHY_CMD_ACTIVE)
|
|
reg_val = readl( mmio + PHY_ACCESS );
|
|
|
|
writel( PHY_WR_CMD | ((phy_id & 0x1f) << 21) |
|
|
((reg & 0x1f) << 16)|val, mmio + PHY_ACCESS);
|
|
|
|
do{
|
|
reg_val = readl(mmio + PHY_ACCESS);
|
|
udelay(30); /* It takes 30 us to read/write the data */
|
|
} while (--repeat && (reg_val & PHY_CMD_ACTIVE));
|
|
|
|
if(reg_val & PHY_RD_ERR)
|
|
goto err_phy_write;
|
|
|
|
return 0;
|
|
|
|
err_phy_write:
|
|
return -EINVAL;
|
|
|
|
}
|
|
|
|
/* This is the mii register read function provided to the mii interface. */
|
|
static int amd8111e_mdio_read(struct net_device *dev, int phy_id, int reg_num)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
unsigned int reg_val;
|
|
|
|
amd8111e_read_phy(lp,phy_id,reg_num,®_val);
|
|
return reg_val;
|
|
|
|
}
|
|
|
|
/* This is the mii register write function provided to the mii interface. */
|
|
static void amd8111e_mdio_write(struct net_device *dev,
|
|
int phy_id, int reg_num, int val)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
|
|
amd8111e_write_phy(lp, phy_id, reg_num, val);
|
|
}
|
|
|
|
/* This function will set PHY speed. During initialization sets
|
|
* the original speed to 100 full
|
|
*/
|
|
static void amd8111e_set_ext_phy(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
u32 bmcr,advert,tmp;
|
|
|
|
/* Determine mii register values to set the speed */
|
|
advert = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_ADVERTISE);
|
|
tmp = advert & ~(ADVERTISE_ALL | ADVERTISE_100BASE4);
|
|
switch (lp->ext_phy_option){
|
|
|
|
default:
|
|
case SPEED_AUTONEG: /* advertise all values */
|
|
tmp |= ( ADVERTISE_10HALF|ADVERTISE_10FULL|
|
|
ADVERTISE_100HALF|ADVERTISE_100FULL) ;
|
|
break;
|
|
case SPEED10_HALF:
|
|
tmp |= ADVERTISE_10HALF;
|
|
break;
|
|
case SPEED10_FULL:
|
|
tmp |= ADVERTISE_10FULL;
|
|
break;
|
|
case SPEED100_HALF:
|
|
tmp |= ADVERTISE_100HALF;
|
|
break;
|
|
case SPEED100_FULL:
|
|
tmp |= ADVERTISE_100FULL;
|
|
break;
|
|
}
|
|
|
|
if(advert != tmp)
|
|
amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_ADVERTISE, tmp);
|
|
/* Restart auto negotiation */
|
|
bmcr = amd8111e_mdio_read(dev, lp->ext_phy_addr, MII_BMCR);
|
|
bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
|
|
amd8111e_mdio_write(dev, lp->ext_phy_addr, MII_BMCR, bmcr);
|
|
|
|
}
|
|
|
|
/* This function will unmap skb->data space and will free
|
|
* all transmit and receive skbuffs.
|
|
*/
|
|
static int amd8111e_free_skbs(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
struct sk_buff *rx_skbuff;
|
|
int i;
|
|
|
|
/* Freeing transmit skbs */
|
|
for(i = 0; i < NUM_TX_BUFFERS; i++){
|
|
if(lp->tx_skbuff[i]){
|
|
pci_unmap_single(lp->pci_dev,lp->tx_dma_addr[i], lp->tx_skbuff[i]->len,PCI_DMA_TODEVICE);
|
|
dev_kfree_skb (lp->tx_skbuff[i]);
|
|
lp->tx_skbuff[i] = NULL;
|
|
lp->tx_dma_addr[i] = 0;
|
|
}
|
|
}
|
|
/* Freeing previously allocated receive buffers */
|
|
for (i = 0; i < NUM_RX_BUFFERS; i++){
|
|
rx_skbuff = lp->rx_skbuff[i];
|
|
if(rx_skbuff != NULL){
|
|
pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[i],
|
|
lp->rx_buff_len - 2,PCI_DMA_FROMDEVICE);
|
|
dev_kfree_skb(lp->rx_skbuff[i]);
|
|
lp->rx_skbuff[i] = NULL;
|
|
lp->rx_dma_addr[i] = 0;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This will set the receive buffer length corresponding
|
|
* to the mtu size of networkinterface.
|
|
*/
|
|
static inline void amd8111e_set_rx_buff_len(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
unsigned int mtu = dev->mtu;
|
|
|
|
if (mtu > ETH_DATA_LEN){
|
|
/* MTU + ethernet header + FCS
|
|
* + optional VLAN tag + skb reserve space 2
|
|
*/
|
|
lp->rx_buff_len = mtu + ETH_HLEN + 10;
|
|
lp->options |= OPTION_JUMBO_ENABLE;
|
|
} else{
|
|
lp->rx_buff_len = PKT_BUFF_SZ;
|
|
lp->options &= ~OPTION_JUMBO_ENABLE;
|
|
}
|
|
}
|
|
|
|
/* This function will free all the previously allocated buffers,
|
|
* determine new receive buffer length and will allocate new receive buffers.
|
|
* This function also allocates and initializes both the transmitter
|
|
* and receive hardware descriptors.
|
|
*/
|
|
static int amd8111e_init_ring(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
lp->rx_idx = lp->tx_idx = 0;
|
|
lp->tx_complete_idx = 0;
|
|
lp->tx_ring_idx = 0;
|
|
|
|
|
|
if(lp->opened)
|
|
/* Free previously allocated transmit and receive skbs */
|
|
amd8111e_free_skbs(dev);
|
|
|
|
else{
|
|
/* allocate the tx and rx descriptors */
|
|
if((lp->tx_ring = pci_alloc_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
|
|
&lp->tx_ring_dma_addr)) == NULL)
|
|
|
|
goto err_no_mem;
|
|
|
|
if((lp->rx_ring = pci_alloc_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
|
|
&lp->rx_ring_dma_addr)) == NULL)
|
|
|
|
goto err_free_tx_ring;
|
|
|
|
}
|
|
/* Set new receive buff size */
|
|
amd8111e_set_rx_buff_len(dev);
|
|
|
|
/* Allocating receive skbs */
|
|
for (i = 0; i < NUM_RX_BUFFERS; i++) {
|
|
|
|
lp->rx_skbuff[i] = netdev_alloc_skb(dev, lp->rx_buff_len);
|
|
if (!lp->rx_skbuff[i]) {
|
|
/* Release previos allocated skbs */
|
|
for(--i; i >= 0 ;i--)
|
|
dev_kfree_skb(lp->rx_skbuff[i]);
|
|
goto err_free_rx_ring;
|
|
}
|
|
skb_reserve(lp->rx_skbuff[i],2);
|
|
}
|
|
/* Initilaizing receive descriptors */
|
|
for (i = 0; i < NUM_RX_BUFFERS; i++) {
|
|
lp->rx_dma_addr[i] = pci_map_single(lp->pci_dev,
|
|
lp->rx_skbuff[i]->data,lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
|
|
|
|
lp->rx_ring[i].buff_phy_addr = cpu_to_le32(lp->rx_dma_addr[i]);
|
|
lp->rx_ring[i].buff_count = cpu_to_le16(lp->rx_buff_len-2);
|
|
wmb();
|
|
lp->rx_ring[i].rx_flags = cpu_to_le16(OWN_BIT);
|
|
}
|
|
|
|
/* Initializing transmit descriptors */
|
|
for (i = 0; i < NUM_TX_RING_DR; i++) {
|
|
lp->tx_ring[i].buff_phy_addr = 0;
|
|
lp->tx_ring[i].tx_flags = 0;
|
|
lp->tx_ring[i].buff_count = 0;
|
|
}
|
|
|
|
return 0;
|
|
|
|
err_free_rx_ring:
|
|
|
|
pci_free_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,lp->rx_ring,
|
|
lp->rx_ring_dma_addr);
|
|
|
|
err_free_tx_ring:
|
|
|
|
pci_free_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,lp->tx_ring,
|
|
lp->tx_ring_dma_addr);
|
|
|
|
err_no_mem:
|
|
return -ENOMEM;
|
|
}
|
|
|
|
/* This function will set the interrupt coalescing according
|
|
* to the input arguments
|
|
*/
|
|
static int amd8111e_set_coalesce(struct net_device *dev, enum coal_mode cmod)
|
|
{
|
|
unsigned int timeout;
|
|
unsigned int event_count;
|
|
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
void __iomem *mmio = lp->mmio;
|
|
struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
|
|
|
|
|
|
switch(cmod)
|
|
{
|
|
case RX_INTR_COAL :
|
|
timeout = coal_conf->rx_timeout;
|
|
event_count = coal_conf->rx_event_count;
|
|
if( timeout > MAX_TIMEOUT ||
|
|
event_count > MAX_EVENT_COUNT )
|
|
return -EINVAL;
|
|
|
|
timeout = timeout * DELAY_TIMER_CONV;
|
|
writel(VAL0|STINTEN, mmio+INTEN0);
|
|
writel((u32)DLY_INT_A_R0|( event_count<< 16 )|timeout,
|
|
mmio+DLY_INT_A);
|
|
break;
|
|
|
|
case TX_INTR_COAL :
|
|
timeout = coal_conf->tx_timeout;
|
|
event_count = coal_conf->tx_event_count;
|
|
if( timeout > MAX_TIMEOUT ||
|
|
event_count > MAX_EVENT_COUNT )
|
|
return -EINVAL;
|
|
|
|
|
|
timeout = timeout * DELAY_TIMER_CONV;
|
|
writel(VAL0|STINTEN,mmio+INTEN0);
|
|
writel((u32)DLY_INT_B_T0|( event_count<< 16 )|timeout,
|
|
mmio+DLY_INT_B);
|
|
break;
|
|
|
|
case DISABLE_COAL:
|
|
writel(0,mmio+STVAL);
|
|
writel(STINTEN, mmio+INTEN0);
|
|
writel(0, mmio +DLY_INT_B);
|
|
writel(0, mmio+DLY_INT_A);
|
|
break;
|
|
case ENABLE_COAL:
|
|
/* Start the timer */
|
|
writel((u32)SOFT_TIMER_FREQ, mmio+STVAL); /* 0.5 sec */
|
|
writel(VAL0|STINTEN, mmio+INTEN0);
|
|
break;
|
|
default:
|
|
break;
|
|
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* This function initializes the device registers and starts the device. */
|
|
static int amd8111e_restart(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
void __iomem *mmio = lp->mmio;
|
|
int i,reg_val;
|
|
|
|
/* stop the chip */
|
|
writel(RUN, mmio + CMD0);
|
|
|
|
if(amd8111e_init_ring(dev))
|
|
return -ENOMEM;
|
|
|
|
/* enable the port manager and set auto negotiation always */
|
|
writel((u32) VAL1|EN_PMGR, mmio + CMD3 );
|
|
writel((u32)XPHYANE|XPHYRST , mmio + CTRL2);
|
|
|
|
amd8111e_set_ext_phy(dev);
|
|
|
|
/* set control registers */
|
|
reg_val = readl(mmio + CTRL1);
|
|
reg_val &= ~XMTSP_MASK;
|
|
writel( reg_val| XMTSP_128 | CACHE_ALIGN, mmio + CTRL1 );
|
|
|
|
/* enable interrupt */
|
|
writel( APINT5EN | APINT4EN | APINT3EN | APINT2EN | APINT1EN |
|
|
APINT0EN | MIIPDTINTEN | MCCIINTEN | MCCINTEN | MREINTEN |
|
|
SPNDINTEN | MPINTEN | SINTEN | STINTEN, mmio + INTEN0);
|
|
|
|
writel(VAL3 | LCINTEN | VAL1 | TINTEN0 | VAL0 | RINTEN0, mmio + INTEN0);
|
|
|
|
/* initialize tx and rx ring base addresses */
|
|
writel((u32)lp->tx_ring_dma_addr,mmio + XMT_RING_BASE_ADDR0);
|
|
writel((u32)lp->rx_ring_dma_addr,mmio+ RCV_RING_BASE_ADDR0);
|
|
|
|
writew((u32)NUM_TX_RING_DR, mmio + XMT_RING_LEN0);
|
|
writew((u16)NUM_RX_RING_DR, mmio + RCV_RING_LEN0);
|
|
|
|
/* set default IPG to 96 */
|
|
writew((u32)DEFAULT_IPG,mmio+IPG);
|
|
writew((u32)(DEFAULT_IPG-IFS1_DELTA), mmio + IFS1);
|
|
|
|
if(lp->options & OPTION_JUMBO_ENABLE){
|
|
writel((u32)VAL2|JUMBO, mmio + CMD3);
|
|
/* Reset REX_UFLO */
|
|
writel( REX_UFLO, mmio + CMD2);
|
|
/* Should not set REX_UFLO for jumbo frames */
|
|
writel( VAL0 | APAD_XMT|REX_RTRY , mmio + CMD2);
|
|
}else{
|
|
writel( VAL0 | APAD_XMT | REX_RTRY|REX_UFLO, mmio + CMD2);
|
|
writel((u32)JUMBO, mmio + CMD3);
|
|
}
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
writel((u32) VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3);
|
|
#endif
|
|
writel( VAL0 | APAD_XMT | REX_RTRY, mmio + CMD2 );
|
|
|
|
/* Setting the MAC address to the device */
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
writeb( dev->dev_addr[i], mmio + PADR + i );
|
|
|
|
/* Enable interrupt coalesce */
|
|
if(lp->options & OPTION_INTR_COAL_ENABLE){
|
|
netdev_info(dev, "Interrupt Coalescing Enabled.\n");
|
|
amd8111e_set_coalesce(dev,ENABLE_COAL);
|
|
}
|
|
|
|
/* set RUN bit to start the chip */
|
|
writel(VAL2 | RDMD0, mmio + CMD0);
|
|
writel(VAL0 | INTREN | RUN, mmio + CMD0);
|
|
|
|
/* To avoid PCI posting bug */
|
|
readl(mmio+CMD0);
|
|
return 0;
|
|
}
|
|
|
|
/* This function clears necessary the device registers. */
|
|
static void amd8111e_init_hw_default(struct amd8111e_priv *lp)
|
|
{
|
|
unsigned int reg_val;
|
|
unsigned int logic_filter[2] ={0,};
|
|
void __iomem *mmio = lp->mmio;
|
|
|
|
|
|
/* stop the chip */
|
|
writel(RUN, mmio + CMD0);
|
|
|
|
/* AUTOPOLL0 Register *//*TBD default value is 8100 in FPS */
|
|
writew( 0x8100 | lp->ext_phy_addr, mmio + AUTOPOLL0);
|
|
|
|
/* Clear RCV_RING_BASE_ADDR */
|
|
writel(0, mmio + RCV_RING_BASE_ADDR0);
|
|
|
|
/* Clear XMT_RING_BASE_ADDR */
|
|
writel(0, mmio + XMT_RING_BASE_ADDR0);
|
|
writel(0, mmio + XMT_RING_BASE_ADDR1);
|
|
writel(0, mmio + XMT_RING_BASE_ADDR2);
|
|
writel(0, mmio + XMT_RING_BASE_ADDR3);
|
|
|
|
/* Clear CMD0 */
|
|
writel(CMD0_CLEAR,mmio + CMD0);
|
|
|
|
/* Clear CMD2 */
|
|
writel(CMD2_CLEAR, mmio +CMD2);
|
|
|
|
/* Clear CMD7 */
|
|
writel(CMD7_CLEAR , mmio + CMD7);
|
|
|
|
/* Clear DLY_INT_A and DLY_INT_B */
|
|
writel(0x0, mmio + DLY_INT_A);
|
|
writel(0x0, mmio + DLY_INT_B);
|
|
|
|
/* Clear FLOW_CONTROL */
|
|
writel(0x0, mmio + FLOW_CONTROL);
|
|
|
|
/* Clear INT0 write 1 to clear register */
|
|
reg_val = readl(mmio + INT0);
|
|
writel(reg_val, mmio + INT0);
|
|
|
|
/* Clear STVAL */
|
|
writel(0x0, mmio + STVAL);
|
|
|
|
/* Clear INTEN0 */
|
|
writel( INTEN0_CLEAR, mmio + INTEN0);
|
|
|
|
/* Clear LADRF */
|
|
writel(0x0 , mmio + LADRF);
|
|
|
|
/* Set SRAM_SIZE & SRAM_BOUNDARY registers */
|
|
writel( 0x80010,mmio + SRAM_SIZE);
|
|
|
|
/* Clear RCV_RING0_LEN */
|
|
writel(0x0, mmio + RCV_RING_LEN0);
|
|
|
|
/* Clear XMT_RING0/1/2/3_LEN */
|
|
writel(0x0, mmio + XMT_RING_LEN0);
|
|
writel(0x0, mmio + XMT_RING_LEN1);
|
|
writel(0x0, mmio + XMT_RING_LEN2);
|
|
writel(0x0, mmio + XMT_RING_LEN3);
|
|
|
|
/* Clear XMT_RING_LIMIT */
|
|
writel(0x0, mmio + XMT_RING_LIMIT);
|
|
|
|
/* Clear MIB */
|
|
writew(MIB_CLEAR, mmio + MIB_ADDR);
|
|
|
|
/* Clear LARF */
|
|
amd8111e_writeq(*(u64 *)logic_filter, mmio + LADRF);
|
|
|
|
/* SRAM_SIZE register */
|
|
reg_val = readl(mmio + SRAM_SIZE);
|
|
|
|
if(lp->options & OPTION_JUMBO_ENABLE)
|
|
writel( VAL2|JUMBO, mmio + CMD3);
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
writel(VAL2|VSIZE|VL_TAG_DEL, mmio + CMD3 );
|
|
#endif
|
|
/* Set default value to CTRL1 Register */
|
|
writel(CTRL1_DEFAULT, mmio + CTRL1);
|
|
|
|
/* To avoid PCI posting bug */
|
|
readl(mmio + CMD2);
|
|
|
|
}
|
|
|
|
/* This function disables the interrupt and clears all the pending
|
|
* interrupts in INT0
|
|
*/
|
|
static void amd8111e_disable_interrupt(struct amd8111e_priv *lp)
|
|
{
|
|
u32 intr0;
|
|
|
|
/* Disable interrupt */
|
|
writel(INTREN, lp->mmio + CMD0);
|
|
|
|
/* Clear INT0 */
|
|
intr0 = readl(lp->mmio + INT0);
|
|
writel(intr0, lp->mmio + INT0);
|
|
|
|
/* To avoid PCI posting bug */
|
|
readl(lp->mmio + INT0);
|
|
|
|
}
|
|
|
|
/* This function stops the chip. */
|
|
static void amd8111e_stop_chip(struct amd8111e_priv *lp)
|
|
{
|
|
writel(RUN, lp->mmio + CMD0);
|
|
|
|
/* To avoid PCI posting bug */
|
|
readl(lp->mmio + CMD0);
|
|
}
|
|
|
|
/* This function frees the transmiter and receiver descriptor rings. */
|
|
static void amd8111e_free_ring(struct amd8111e_priv *lp)
|
|
{
|
|
/* Free transmit and receive descriptor rings */
|
|
if(lp->rx_ring){
|
|
pci_free_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_rx_dr)*NUM_RX_RING_DR,
|
|
lp->rx_ring, lp->rx_ring_dma_addr);
|
|
lp->rx_ring = NULL;
|
|
}
|
|
|
|
if(lp->tx_ring){
|
|
pci_free_consistent(lp->pci_dev,
|
|
sizeof(struct amd8111e_tx_dr)*NUM_TX_RING_DR,
|
|
lp->tx_ring, lp->tx_ring_dma_addr);
|
|
|
|
lp->tx_ring = NULL;
|
|
}
|
|
|
|
}
|
|
|
|
/* This function will free all the transmit skbs that are actually
|
|
* transmitted by the device. It will check the ownership of the
|
|
* skb before freeing the skb.
|
|
*/
|
|
static int amd8111e_tx(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
|
|
int status;
|
|
/* Complete all the transmit packet */
|
|
while (lp->tx_complete_idx != lp->tx_idx){
|
|
tx_index = lp->tx_complete_idx & TX_RING_DR_MOD_MASK;
|
|
status = le16_to_cpu(lp->tx_ring[tx_index].tx_flags);
|
|
|
|
if(status & OWN_BIT)
|
|
break; /* It still hasn't been Txed */
|
|
|
|
lp->tx_ring[tx_index].buff_phy_addr = 0;
|
|
|
|
/* We must free the original skb */
|
|
if (lp->tx_skbuff[tx_index]) {
|
|
pci_unmap_single(lp->pci_dev, lp->tx_dma_addr[tx_index],
|
|
lp->tx_skbuff[tx_index]->len,
|
|
PCI_DMA_TODEVICE);
|
|
dev_kfree_skb_irq (lp->tx_skbuff[tx_index]);
|
|
lp->tx_skbuff[tx_index] = NULL;
|
|
lp->tx_dma_addr[tx_index] = 0;
|
|
}
|
|
lp->tx_complete_idx++;
|
|
/*COAL update tx coalescing parameters */
|
|
lp->coal_conf.tx_packets++;
|
|
lp->coal_conf.tx_bytes +=
|
|
le16_to_cpu(lp->tx_ring[tx_index].buff_count);
|
|
|
|
if (netif_queue_stopped(dev) &&
|
|
lp->tx_complete_idx > lp->tx_idx - NUM_TX_BUFFERS +2){
|
|
/* The ring is no longer full, clear tbusy. */
|
|
/* lp->tx_full = 0; */
|
|
netif_wake_queue (dev);
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
/* This function handles the driver receive operation in polling mode */
|
|
static int amd8111e_rx_poll(struct napi_struct *napi, int budget)
|
|
{
|
|
struct amd8111e_priv *lp = container_of(napi, struct amd8111e_priv, napi);
|
|
struct net_device *dev = lp->amd8111e_net_dev;
|
|
int rx_index = lp->rx_idx & RX_RING_DR_MOD_MASK;
|
|
void __iomem *mmio = lp->mmio;
|
|
struct sk_buff *skb,*new_skb;
|
|
int min_pkt_len, status;
|
|
int num_rx_pkt = 0;
|
|
short pkt_len;
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
short vtag;
|
|
#endif
|
|
|
|
while (num_rx_pkt < budget) {
|
|
status = le16_to_cpu(lp->rx_ring[rx_index].rx_flags);
|
|
if (status & OWN_BIT)
|
|
break;
|
|
|
|
/* There is a tricky error noted by John Murphy,
|
|
* <murf@perftech.com> to Russ Nelson: Even with
|
|
* full-sized * buffers it's possible for a
|
|
* jabber packet to use two buffers, with only
|
|
* the last correctly noting the error.
|
|
*/
|
|
if (status & ERR_BIT) {
|
|
/* resetting flags */
|
|
lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
|
|
goto err_next_pkt;
|
|
}
|
|
/* check for STP and ENP */
|
|
if (!((status & STP_BIT) && (status & ENP_BIT))){
|
|
/* resetting flags */
|
|
lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
|
|
goto err_next_pkt;
|
|
}
|
|
pkt_len = le16_to_cpu(lp->rx_ring[rx_index].msg_count) - 4;
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
vtag = status & TT_MASK;
|
|
/* MAC will strip vlan tag */
|
|
if (vtag != 0)
|
|
min_pkt_len = MIN_PKT_LEN - 4;
|
|
else
|
|
#endif
|
|
min_pkt_len = MIN_PKT_LEN;
|
|
|
|
if (pkt_len < min_pkt_len) {
|
|
lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
|
|
lp->drv_rx_errors++;
|
|
goto err_next_pkt;
|
|
}
|
|
new_skb = netdev_alloc_skb(dev, lp->rx_buff_len);
|
|
if (!new_skb) {
|
|
/* if allocation fail,
|
|
* ignore that pkt and go to next one
|
|
*/
|
|
lp->rx_ring[rx_index].rx_flags &= RESET_RX_FLAGS;
|
|
lp->drv_rx_errors++;
|
|
goto err_next_pkt;
|
|
}
|
|
|
|
skb_reserve(new_skb, 2);
|
|
skb = lp->rx_skbuff[rx_index];
|
|
pci_unmap_single(lp->pci_dev,lp->rx_dma_addr[rx_index],
|
|
lp->rx_buff_len-2, PCI_DMA_FROMDEVICE);
|
|
skb_put(skb, pkt_len);
|
|
lp->rx_skbuff[rx_index] = new_skb;
|
|
lp->rx_dma_addr[rx_index] = pci_map_single(lp->pci_dev,
|
|
new_skb->data,
|
|
lp->rx_buff_len-2,
|
|
PCI_DMA_FROMDEVICE);
|
|
|
|
skb->protocol = eth_type_trans(skb, dev);
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
if (vtag == TT_VLAN_TAGGED){
|
|
u16 vlan_tag = le16_to_cpu(lp->rx_ring[rx_index].tag_ctrl_info);
|
|
__vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tag);
|
|
}
|
|
#endif
|
|
napi_gro_receive(napi, skb);
|
|
/* COAL update rx coalescing parameters */
|
|
lp->coal_conf.rx_packets++;
|
|
lp->coal_conf.rx_bytes += pkt_len;
|
|
num_rx_pkt++;
|
|
|
|
err_next_pkt:
|
|
lp->rx_ring[rx_index].buff_phy_addr
|
|
= cpu_to_le32(lp->rx_dma_addr[rx_index]);
|
|
lp->rx_ring[rx_index].buff_count =
|
|
cpu_to_le16(lp->rx_buff_len-2);
|
|
wmb();
|
|
lp->rx_ring[rx_index].rx_flags |= cpu_to_le16(OWN_BIT);
|
|
rx_index = (++lp->rx_idx) & RX_RING_DR_MOD_MASK;
|
|
}
|
|
|
|
if (num_rx_pkt < budget && napi_complete_done(napi, num_rx_pkt)) {
|
|
unsigned long flags;
|
|
|
|
/* Receive descriptor is empty now */
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
writel(VAL0|RINTEN0, mmio + INTEN0);
|
|
writel(VAL2 | RDMD0, mmio + CMD0);
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
}
|
|
|
|
return num_rx_pkt;
|
|
}
|
|
|
|
/* This function will indicate the link status to the kernel. */
|
|
static int amd8111e_link_change(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int status0,speed;
|
|
|
|
/* read the link change */
|
|
status0 = readl(lp->mmio + STAT0);
|
|
|
|
if(status0 & LINK_STATS){
|
|
if(status0 & AUTONEG_COMPLETE)
|
|
lp->link_config.autoneg = AUTONEG_ENABLE;
|
|
else
|
|
lp->link_config.autoneg = AUTONEG_DISABLE;
|
|
|
|
if(status0 & FULL_DPLX)
|
|
lp->link_config.duplex = DUPLEX_FULL;
|
|
else
|
|
lp->link_config.duplex = DUPLEX_HALF;
|
|
speed = (status0 & SPEED_MASK) >> 7;
|
|
if(speed == PHY_SPEED_10)
|
|
lp->link_config.speed = SPEED_10;
|
|
else if(speed == PHY_SPEED_100)
|
|
lp->link_config.speed = SPEED_100;
|
|
|
|
netdev_info(dev, "Link is Up. Speed is %s Mbps %s Duplex\n",
|
|
(lp->link_config.speed == SPEED_100) ?
|
|
"100" : "10",
|
|
(lp->link_config.duplex == DUPLEX_FULL) ?
|
|
"Full" : "Half");
|
|
|
|
netif_carrier_on(dev);
|
|
}
|
|
else{
|
|
lp->link_config.speed = SPEED_INVALID;
|
|
lp->link_config.duplex = DUPLEX_INVALID;
|
|
lp->link_config.autoneg = AUTONEG_INVALID;
|
|
netdev_info(dev, "Link is Down.\n");
|
|
netif_carrier_off(dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function reads the mib counters. */
|
|
static int amd8111e_read_mib(void __iomem *mmio, u8 MIB_COUNTER)
|
|
{
|
|
unsigned int status;
|
|
unsigned int data;
|
|
unsigned int repeat = REPEAT_CNT;
|
|
|
|
writew( MIB_RD_CMD | MIB_COUNTER, mmio + MIB_ADDR);
|
|
do {
|
|
status = readw(mmio + MIB_ADDR);
|
|
udelay(2); /* controller takes MAX 2 us to get mib data */
|
|
}
|
|
while (--repeat && (status & MIB_CMD_ACTIVE));
|
|
|
|
data = readl(mmio + MIB_DATA);
|
|
return data;
|
|
}
|
|
|
|
/* This function reads the mib registers and returns the hardware statistics.
|
|
* It updates previous internal driver statistics with new values.
|
|
*/
|
|
static struct net_device_stats *amd8111e_get_stats(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
void __iomem *mmio = lp->mmio;
|
|
unsigned long flags;
|
|
struct net_device_stats *new_stats = &dev->stats;
|
|
|
|
if (!lp->opened)
|
|
return new_stats;
|
|
spin_lock_irqsave (&lp->lock, flags);
|
|
|
|
/* stats.rx_packets */
|
|
new_stats->rx_packets = amd8111e_read_mib(mmio, rcv_broadcast_pkts)+
|
|
amd8111e_read_mib(mmio, rcv_multicast_pkts)+
|
|
amd8111e_read_mib(mmio, rcv_unicast_pkts);
|
|
|
|
/* stats.tx_packets */
|
|
new_stats->tx_packets = amd8111e_read_mib(mmio, xmt_packets);
|
|
|
|
/*stats.rx_bytes */
|
|
new_stats->rx_bytes = amd8111e_read_mib(mmio, rcv_octets);
|
|
|
|
/* stats.tx_bytes */
|
|
new_stats->tx_bytes = amd8111e_read_mib(mmio, xmt_octets);
|
|
|
|
/* stats.rx_errors */
|
|
/* hw errors + errors driver reported */
|
|
new_stats->rx_errors = amd8111e_read_mib(mmio, rcv_undersize_pkts)+
|
|
amd8111e_read_mib(mmio, rcv_fragments)+
|
|
amd8111e_read_mib(mmio, rcv_jabbers)+
|
|
amd8111e_read_mib(mmio, rcv_alignment_errors)+
|
|
amd8111e_read_mib(mmio, rcv_fcs_errors)+
|
|
amd8111e_read_mib(mmio, rcv_miss_pkts)+
|
|
lp->drv_rx_errors;
|
|
|
|
/* stats.tx_errors */
|
|
new_stats->tx_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
|
|
|
|
/* stats.rx_dropped*/
|
|
new_stats->rx_dropped = amd8111e_read_mib(mmio, rcv_miss_pkts);
|
|
|
|
/* stats.tx_dropped*/
|
|
new_stats->tx_dropped = amd8111e_read_mib(mmio, xmt_underrun_pkts);
|
|
|
|
/* stats.multicast*/
|
|
new_stats->multicast = amd8111e_read_mib(mmio, rcv_multicast_pkts);
|
|
|
|
/* stats.collisions*/
|
|
new_stats->collisions = amd8111e_read_mib(mmio, xmt_collisions);
|
|
|
|
/* stats.rx_length_errors*/
|
|
new_stats->rx_length_errors =
|
|
amd8111e_read_mib(mmio, rcv_undersize_pkts)+
|
|
amd8111e_read_mib(mmio, rcv_oversize_pkts);
|
|
|
|
/* stats.rx_over_errors*/
|
|
new_stats->rx_over_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
|
|
|
|
/* stats.rx_crc_errors*/
|
|
new_stats->rx_crc_errors = amd8111e_read_mib(mmio, rcv_fcs_errors);
|
|
|
|
/* stats.rx_frame_errors*/
|
|
new_stats->rx_frame_errors =
|
|
amd8111e_read_mib(mmio, rcv_alignment_errors);
|
|
|
|
/* stats.rx_fifo_errors */
|
|
new_stats->rx_fifo_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
|
|
|
|
/* stats.rx_missed_errors */
|
|
new_stats->rx_missed_errors = amd8111e_read_mib(mmio, rcv_miss_pkts);
|
|
|
|
/* stats.tx_aborted_errors*/
|
|
new_stats->tx_aborted_errors =
|
|
amd8111e_read_mib(mmio, xmt_excessive_collision);
|
|
|
|
/* stats.tx_carrier_errors*/
|
|
new_stats->tx_carrier_errors =
|
|
amd8111e_read_mib(mmio, xmt_loss_carrier);
|
|
|
|
/* stats.tx_fifo_errors*/
|
|
new_stats->tx_fifo_errors = amd8111e_read_mib(mmio, xmt_underrun_pkts);
|
|
|
|
/* stats.tx_window_errors*/
|
|
new_stats->tx_window_errors =
|
|
amd8111e_read_mib(mmio, xmt_late_collision);
|
|
|
|
/* Reset the mibs for collecting new statistics */
|
|
/* writew(MIB_CLEAR, mmio + MIB_ADDR);*/
|
|
|
|
spin_unlock_irqrestore (&lp->lock, flags);
|
|
|
|
return new_stats;
|
|
}
|
|
|
|
/* This function recalculate the interrupt coalescing mode on every interrupt
|
|
* according to the datarate and the packet rate.
|
|
*/
|
|
static int amd8111e_calc_coalesce(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
struct amd8111e_coalesce_conf *coal_conf = &lp->coal_conf;
|
|
int tx_pkt_rate;
|
|
int rx_pkt_rate;
|
|
int tx_data_rate;
|
|
int rx_data_rate;
|
|
int rx_pkt_size;
|
|
int tx_pkt_size;
|
|
|
|
tx_pkt_rate = coal_conf->tx_packets - coal_conf->tx_prev_packets;
|
|
coal_conf->tx_prev_packets = coal_conf->tx_packets;
|
|
|
|
tx_data_rate = coal_conf->tx_bytes - coal_conf->tx_prev_bytes;
|
|
coal_conf->tx_prev_bytes = coal_conf->tx_bytes;
|
|
|
|
rx_pkt_rate = coal_conf->rx_packets - coal_conf->rx_prev_packets;
|
|
coal_conf->rx_prev_packets = coal_conf->rx_packets;
|
|
|
|
rx_data_rate = coal_conf->rx_bytes - coal_conf->rx_prev_bytes;
|
|
coal_conf->rx_prev_bytes = coal_conf->rx_bytes;
|
|
|
|
if(rx_pkt_rate < 800){
|
|
if(coal_conf->rx_coal_type != NO_COALESCE){
|
|
|
|
coal_conf->rx_timeout = 0x0;
|
|
coal_conf->rx_event_count = 0;
|
|
amd8111e_set_coalesce(dev,RX_INTR_COAL);
|
|
coal_conf->rx_coal_type = NO_COALESCE;
|
|
}
|
|
}
|
|
else{
|
|
|
|
rx_pkt_size = rx_data_rate/rx_pkt_rate;
|
|
if (rx_pkt_size < 128){
|
|
if(coal_conf->rx_coal_type != NO_COALESCE){
|
|
|
|
coal_conf->rx_timeout = 0;
|
|
coal_conf->rx_event_count = 0;
|
|
amd8111e_set_coalesce(dev,RX_INTR_COAL);
|
|
coal_conf->rx_coal_type = NO_COALESCE;
|
|
}
|
|
|
|
}
|
|
else if ( (rx_pkt_size >= 128) && (rx_pkt_size < 512) ){
|
|
|
|
if(coal_conf->rx_coal_type != LOW_COALESCE){
|
|
coal_conf->rx_timeout = 1;
|
|
coal_conf->rx_event_count = 4;
|
|
amd8111e_set_coalesce(dev,RX_INTR_COAL);
|
|
coal_conf->rx_coal_type = LOW_COALESCE;
|
|
}
|
|
}
|
|
else if ((rx_pkt_size >= 512) && (rx_pkt_size < 1024)){
|
|
|
|
if(coal_conf->rx_coal_type != MEDIUM_COALESCE){
|
|
coal_conf->rx_timeout = 1;
|
|
coal_conf->rx_event_count = 4;
|
|
amd8111e_set_coalesce(dev,RX_INTR_COAL);
|
|
coal_conf->rx_coal_type = MEDIUM_COALESCE;
|
|
}
|
|
|
|
}
|
|
else if(rx_pkt_size >= 1024){
|
|
if(coal_conf->rx_coal_type != HIGH_COALESCE){
|
|
coal_conf->rx_timeout = 2;
|
|
coal_conf->rx_event_count = 3;
|
|
amd8111e_set_coalesce(dev,RX_INTR_COAL);
|
|
coal_conf->rx_coal_type = HIGH_COALESCE;
|
|
}
|
|
}
|
|
}
|
|
/* NOW FOR TX INTR COALESC */
|
|
if(tx_pkt_rate < 800){
|
|
if(coal_conf->tx_coal_type != NO_COALESCE){
|
|
|
|
coal_conf->tx_timeout = 0x0;
|
|
coal_conf->tx_event_count = 0;
|
|
amd8111e_set_coalesce(dev,TX_INTR_COAL);
|
|
coal_conf->tx_coal_type = NO_COALESCE;
|
|
}
|
|
}
|
|
else{
|
|
|
|
tx_pkt_size = tx_data_rate/tx_pkt_rate;
|
|
if (tx_pkt_size < 128){
|
|
|
|
if(coal_conf->tx_coal_type != NO_COALESCE){
|
|
|
|
coal_conf->tx_timeout = 0;
|
|
coal_conf->tx_event_count = 0;
|
|
amd8111e_set_coalesce(dev,TX_INTR_COAL);
|
|
coal_conf->tx_coal_type = NO_COALESCE;
|
|
}
|
|
|
|
}
|
|
else if ( (tx_pkt_size >= 128) && (tx_pkt_size < 512) ){
|
|
|
|
if(coal_conf->tx_coal_type != LOW_COALESCE){
|
|
coal_conf->tx_timeout = 1;
|
|
coal_conf->tx_event_count = 2;
|
|
amd8111e_set_coalesce(dev,TX_INTR_COAL);
|
|
coal_conf->tx_coal_type = LOW_COALESCE;
|
|
|
|
}
|
|
}
|
|
else if ((tx_pkt_size >= 512) && (tx_pkt_size < 1024)){
|
|
|
|
if(coal_conf->tx_coal_type != MEDIUM_COALESCE){
|
|
coal_conf->tx_timeout = 2;
|
|
coal_conf->tx_event_count = 5;
|
|
amd8111e_set_coalesce(dev,TX_INTR_COAL);
|
|
coal_conf->tx_coal_type = MEDIUM_COALESCE;
|
|
}
|
|
|
|
}
|
|
else if(tx_pkt_size >= 1024){
|
|
if (tx_pkt_size >= 1024){
|
|
if(coal_conf->tx_coal_type != HIGH_COALESCE){
|
|
coal_conf->tx_timeout = 4;
|
|
coal_conf->tx_event_count = 8;
|
|
amd8111e_set_coalesce(dev,TX_INTR_COAL);
|
|
coal_conf->tx_coal_type = HIGH_COALESCE;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* This is device interrupt function. It handles transmit,
|
|
* receive,link change and hardware timer interrupts.
|
|
*/
|
|
static irqreturn_t amd8111e_interrupt(int irq, void *dev_id)
|
|
{
|
|
|
|
struct net_device *dev = (struct net_device *)dev_id;
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
void __iomem *mmio = lp->mmio;
|
|
unsigned int intr0, intren0;
|
|
unsigned int handled = 1;
|
|
|
|
if(unlikely(dev == NULL))
|
|
return IRQ_NONE;
|
|
|
|
spin_lock(&lp->lock);
|
|
|
|
/* disabling interrupt */
|
|
writel(INTREN, mmio + CMD0);
|
|
|
|
/* Read interrupt status */
|
|
intr0 = readl(mmio + INT0);
|
|
intren0 = readl(mmio + INTEN0);
|
|
|
|
/* Process all the INT event until INTR bit is clear. */
|
|
|
|
if (!(intr0 & INTR)){
|
|
handled = 0;
|
|
goto err_no_interrupt;
|
|
}
|
|
|
|
/* Current driver processes 4 interrupts : RINT,TINT,LCINT,STINT */
|
|
writel(intr0, mmio + INT0);
|
|
|
|
/* Check if Receive Interrupt has occurred. */
|
|
if (intr0 & RINT0) {
|
|
if (napi_schedule_prep(&lp->napi)) {
|
|
/* Disable receive interupts */
|
|
writel(RINTEN0, mmio + INTEN0);
|
|
/* Schedule a polling routine */
|
|
__napi_schedule(&lp->napi);
|
|
} else if (intren0 & RINTEN0) {
|
|
netdev_dbg(dev, "************Driver bug! interrupt while in poll\n");
|
|
/* Fix by disable receive interrupts */
|
|
writel(RINTEN0, mmio + INTEN0);
|
|
}
|
|
}
|
|
|
|
/* Check if Transmit Interrupt has occurred. */
|
|
if (intr0 & TINT0)
|
|
amd8111e_tx(dev);
|
|
|
|
/* Check if Link Change Interrupt has occurred. */
|
|
if (intr0 & LCINT)
|
|
amd8111e_link_change(dev);
|
|
|
|
/* Check if Hardware Timer Interrupt has occurred. */
|
|
if (intr0 & STINT)
|
|
amd8111e_calc_coalesce(dev);
|
|
|
|
err_no_interrupt:
|
|
writel( VAL0 | INTREN,mmio + CMD0);
|
|
|
|
spin_unlock(&lp->lock);
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
static void amd8111e_poll(struct net_device *dev)
|
|
{
|
|
unsigned long flags;
|
|
local_irq_save(flags);
|
|
amd8111e_interrupt(0, dev);
|
|
local_irq_restore(flags);
|
|
}
|
|
#endif
|
|
|
|
|
|
/* This function closes the network interface and updates
|
|
* the statistics so that most recent statistics will be
|
|
* available after the interface is down.
|
|
*/
|
|
static int amd8111e_close(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
netif_stop_queue(dev);
|
|
|
|
napi_disable(&lp->napi);
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
amd8111e_disable_interrupt(lp);
|
|
amd8111e_stop_chip(lp);
|
|
|
|
/* Free transmit and receive skbs */
|
|
amd8111e_free_skbs(lp->amd8111e_net_dev);
|
|
|
|
netif_carrier_off(lp->amd8111e_net_dev);
|
|
|
|
/* Delete ipg timer */
|
|
if(lp->options & OPTION_DYN_IPG_ENABLE)
|
|
del_timer_sync(&lp->ipg_data.ipg_timer);
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
free_irq(dev->irq, dev);
|
|
amd8111e_free_ring(lp);
|
|
|
|
/* Update the statistics before closing */
|
|
amd8111e_get_stats(dev);
|
|
lp->opened = 0;
|
|
return 0;
|
|
}
|
|
|
|
/* This function opens new interface.It requests irq for the device,
|
|
* initializes the device,buffers and descriptors, and starts the device.
|
|
*/
|
|
static int amd8111e_open(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
|
|
if(dev->irq ==0 || request_irq(dev->irq, amd8111e_interrupt, IRQF_SHARED,
|
|
dev->name, dev))
|
|
return -EAGAIN;
|
|
|
|
napi_enable(&lp->napi);
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
amd8111e_init_hw_default(lp);
|
|
|
|
if(amd8111e_restart(dev)){
|
|
spin_unlock_irq(&lp->lock);
|
|
napi_disable(&lp->napi);
|
|
if (dev->irq)
|
|
free_irq(dev->irq, dev);
|
|
return -ENOMEM;
|
|
}
|
|
/* Start ipg timer */
|
|
if(lp->options & OPTION_DYN_IPG_ENABLE){
|
|
add_timer(&lp->ipg_data.ipg_timer);
|
|
netdev_info(dev, "Dynamic IPG Enabled\n");
|
|
}
|
|
|
|
lp->opened = 1;
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
netif_start_queue(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function checks if there is any transmit descriptors
|
|
* available to queue more packet.
|
|
*/
|
|
static int amd8111e_tx_queue_avail(struct amd8111e_priv *lp)
|
|
{
|
|
int tx_index = lp->tx_idx & TX_BUFF_MOD_MASK;
|
|
if (lp->tx_skbuff[tx_index])
|
|
return -1;
|
|
else
|
|
return 0;
|
|
|
|
}
|
|
|
|
/* This function will queue the transmit packets to the
|
|
* descriptors and will trigger the send operation. It also
|
|
* initializes the transmit descriptors with buffer physical address,
|
|
* byte count, ownership to hardware etc.
|
|
*/
|
|
static netdev_tx_t amd8111e_start_xmit(struct sk_buff *skb,
|
|
struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int tx_index;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&lp->lock, flags);
|
|
|
|
tx_index = lp->tx_idx & TX_RING_DR_MOD_MASK;
|
|
|
|
lp->tx_ring[tx_index].buff_count = cpu_to_le16(skb->len);
|
|
|
|
lp->tx_skbuff[tx_index] = skb;
|
|
lp->tx_ring[tx_index].tx_flags = 0;
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
if (skb_vlan_tag_present(skb)) {
|
|
lp->tx_ring[tx_index].tag_ctrl_cmd |=
|
|
cpu_to_le16(TCC_VLAN_INSERT);
|
|
lp->tx_ring[tx_index].tag_ctrl_info =
|
|
cpu_to_le16(skb_vlan_tag_get(skb));
|
|
|
|
}
|
|
#endif
|
|
lp->tx_dma_addr[tx_index] =
|
|
pci_map_single(lp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE);
|
|
lp->tx_ring[tx_index].buff_phy_addr =
|
|
cpu_to_le32(lp->tx_dma_addr[tx_index]);
|
|
|
|
/* Set FCS and LTINT bits */
|
|
wmb();
|
|
lp->tx_ring[tx_index].tx_flags |=
|
|
cpu_to_le16(OWN_BIT | STP_BIT | ENP_BIT|ADD_FCS_BIT|LTINT_BIT);
|
|
|
|
lp->tx_idx++;
|
|
|
|
/* Trigger an immediate send poll. */
|
|
writel( VAL1 | TDMD0, lp->mmio + CMD0);
|
|
writel( VAL2 | RDMD0,lp->mmio + CMD0);
|
|
|
|
if(amd8111e_tx_queue_avail(lp) < 0){
|
|
netif_stop_queue(dev);
|
|
}
|
|
spin_unlock_irqrestore(&lp->lock, flags);
|
|
return NETDEV_TX_OK;
|
|
}
|
|
/* This function returns all the memory mapped registers of the device. */
|
|
static void amd8111e_read_regs(struct amd8111e_priv *lp, u32 *buf)
|
|
{
|
|
void __iomem *mmio = lp->mmio;
|
|
/* Read only necessary registers */
|
|
buf[0] = readl(mmio + XMT_RING_BASE_ADDR0);
|
|
buf[1] = readl(mmio + XMT_RING_LEN0);
|
|
buf[2] = readl(mmio + RCV_RING_BASE_ADDR0);
|
|
buf[3] = readl(mmio + RCV_RING_LEN0);
|
|
buf[4] = readl(mmio + CMD0);
|
|
buf[5] = readl(mmio + CMD2);
|
|
buf[6] = readl(mmio + CMD3);
|
|
buf[7] = readl(mmio + CMD7);
|
|
buf[8] = readl(mmio + INT0);
|
|
buf[9] = readl(mmio + INTEN0);
|
|
buf[10] = readl(mmio + LADRF);
|
|
buf[11] = readl(mmio + LADRF+4);
|
|
buf[12] = readl(mmio + STAT0);
|
|
}
|
|
|
|
|
|
/* This function sets promiscuos mode, all-multi mode or the multicast address
|
|
* list to the device.
|
|
*/
|
|
static void amd8111e_set_multicast_list(struct net_device *dev)
|
|
{
|
|
struct netdev_hw_addr *ha;
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
u32 mc_filter[2] ;
|
|
int bit_num;
|
|
|
|
if(dev->flags & IFF_PROMISC){
|
|
writel( VAL2 | PROM, lp->mmio + CMD2);
|
|
return;
|
|
}
|
|
else
|
|
writel( PROM, lp->mmio + CMD2);
|
|
if (dev->flags & IFF_ALLMULTI ||
|
|
netdev_mc_count(dev) > MAX_FILTER_SIZE) {
|
|
/* get all multicast packet */
|
|
mc_filter[1] = mc_filter[0] = 0xffffffff;
|
|
lp->options |= OPTION_MULTICAST_ENABLE;
|
|
amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
|
|
return;
|
|
}
|
|
if (netdev_mc_empty(dev)) {
|
|
/* get only own packets */
|
|
mc_filter[1] = mc_filter[0] = 0;
|
|
lp->options &= ~OPTION_MULTICAST_ENABLE;
|
|
amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
|
|
/* disable promiscuous mode */
|
|
writel(PROM, lp->mmio + CMD2);
|
|
return;
|
|
}
|
|
/* load all the multicast addresses in the logic filter */
|
|
lp->options |= OPTION_MULTICAST_ENABLE;
|
|
mc_filter[1] = mc_filter[0] = 0;
|
|
netdev_for_each_mc_addr(ha, dev) {
|
|
bit_num = (ether_crc_le(ETH_ALEN, ha->addr) >> 26) & 0x3f;
|
|
mc_filter[bit_num >> 5] |= 1 << (bit_num & 31);
|
|
}
|
|
amd8111e_writeq(*(u64 *)mc_filter, lp->mmio + LADRF);
|
|
|
|
/* To eliminate PCI posting bug */
|
|
readl(lp->mmio + CMD2);
|
|
|
|
}
|
|
|
|
static void amd8111e_get_drvinfo(struct net_device *dev,
|
|
struct ethtool_drvinfo *info)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
struct pci_dev *pci_dev = lp->pci_dev;
|
|
strlcpy(info->driver, MODULE_NAME, sizeof(info->driver));
|
|
strlcpy(info->version, MODULE_VERS, sizeof(info->version));
|
|
snprintf(info->fw_version, sizeof(info->fw_version),
|
|
"%u", chip_version);
|
|
strlcpy(info->bus_info, pci_name(pci_dev), sizeof(info->bus_info));
|
|
}
|
|
|
|
static int amd8111e_get_regs_len(struct net_device *dev)
|
|
{
|
|
return AMD8111E_REG_DUMP_LEN;
|
|
}
|
|
|
|
static void amd8111e_get_regs(struct net_device *dev, struct ethtool_regs *regs, void *buf)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
regs->version = 0;
|
|
amd8111e_read_regs(lp, buf);
|
|
}
|
|
|
|
static int amd8111e_get_link_ksettings(struct net_device *dev,
|
|
struct ethtool_link_ksettings *cmd)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
spin_lock_irq(&lp->lock);
|
|
mii_ethtool_get_link_ksettings(&lp->mii_if, cmd);
|
|
spin_unlock_irq(&lp->lock);
|
|
return 0;
|
|
}
|
|
|
|
static int amd8111e_set_link_ksettings(struct net_device *dev,
|
|
const struct ethtool_link_ksettings *cmd)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int res;
|
|
spin_lock_irq(&lp->lock);
|
|
res = mii_ethtool_set_link_ksettings(&lp->mii_if, cmd);
|
|
spin_unlock_irq(&lp->lock);
|
|
return res;
|
|
}
|
|
|
|
static int amd8111e_nway_reset(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
return mii_nway_restart(&lp->mii_if);
|
|
}
|
|
|
|
static u32 amd8111e_get_link(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
return mii_link_ok(&lp->mii_if);
|
|
}
|
|
|
|
static void amd8111e_get_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
wol_info->supported = WAKE_MAGIC|WAKE_PHY;
|
|
if (lp->options & OPTION_WOL_ENABLE)
|
|
wol_info->wolopts = WAKE_MAGIC;
|
|
}
|
|
|
|
static int amd8111e_set_wol(struct net_device *dev, struct ethtool_wolinfo *wol_info)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
if (wol_info->wolopts & ~(WAKE_MAGIC|WAKE_PHY))
|
|
return -EINVAL;
|
|
spin_lock_irq(&lp->lock);
|
|
if (wol_info->wolopts & WAKE_MAGIC)
|
|
lp->options |=
|
|
(OPTION_WOL_ENABLE | OPTION_WAKE_MAGIC_ENABLE);
|
|
else if(wol_info->wolopts & WAKE_PHY)
|
|
lp->options |=
|
|
(OPTION_WOL_ENABLE | OPTION_WAKE_PHY_ENABLE);
|
|
else
|
|
lp->options &= ~OPTION_WOL_ENABLE;
|
|
spin_unlock_irq(&lp->lock);
|
|
return 0;
|
|
}
|
|
|
|
static const struct ethtool_ops ops = {
|
|
.get_drvinfo = amd8111e_get_drvinfo,
|
|
.get_regs_len = amd8111e_get_regs_len,
|
|
.get_regs = amd8111e_get_regs,
|
|
.nway_reset = amd8111e_nway_reset,
|
|
.get_link = amd8111e_get_link,
|
|
.get_wol = amd8111e_get_wol,
|
|
.set_wol = amd8111e_set_wol,
|
|
.get_link_ksettings = amd8111e_get_link_ksettings,
|
|
.set_link_ksettings = amd8111e_set_link_ksettings,
|
|
};
|
|
|
|
/* This function handles all the ethtool ioctls. It gives driver info,
|
|
* gets/sets driver speed, gets memory mapped register values, forces
|
|
* auto negotiation, sets/gets WOL options for ethtool application.
|
|
*/
|
|
static int amd8111e_ioctl(struct net_device *dev , struct ifreq *ifr, int cmd)
|
|
{
|
|
struct mii_ioctl_data *data = if_mii(ifr);
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int err;
|
|
u32 mii_regval;
|
|
|
|
switch(cmd) {
|
|
case SIOCGMIIPHY:
|
|
data->phy_id = lp->ext_phy_addr;
|
|
|
|
/* fallthru */
|
|
case SIOCGMIIREG:
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
err = amd8111e_read_phy(lp, data->phy_id,
|
|
data->reg_num & PHY_REG_ADDR_MASK, &mii_regval);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
data->val_out = mii_regval;
|
|
return err;
|
|
|
|
case SIOCSMIIREG:
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
err = amd8111e_write_phy(lp, data->phy_id,
|
|
data->reg_num & PHY_REG_ADDR_MASK, data->val_in);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
return err;
|
|
|
|
default:
|
|
/* do nothing */
|
|
break;
|
|
}
|
|
return -EOPNOTSUPP;
|
|
}
|
|
static int amd8111e_set_mac_address(struct net_device *dev, void *p)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int i;
|
|
struct sockaddr *addr = p;
|
|
|
|
memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
|
|
spin_lock_irq(&lp->lock);
|
|
/* Setting the MAC address to the device */
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
writeb( dev->dev_addr[i], lp->mmio + PADR + i );
|
|
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* This function changes the mtu of the device. It restarts the device to
|
|
* initialize the descriptor with new receive buffers.
|
|
*/
|
|
static int amd8111e_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int err;
|
|
|
|
if (!netif_running(dev)) {
|
|
/* new_mtu will be used
|
|
* when device starts netxt time
|
|
*/
|
|
dev->mtu = new_mtu;
|
|
return 0;
|
|
}
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
|
|
/* stop the chip */
|
|
writel(RUN, lp->mmio + CMD0);
|
|
|
|
dev->mtu = new_mtu;
|
|
|
|
err = amd8111e_restart(dev);
|
|
spin_unlock_irq(&lp->lock);
|
|
if(!err)
|
|
netif_start_queue(dev);
|
|
return err;
|
|
}
|
|
|
|
static int amd8111e_enable_magicpkt(struct amd8111e_priv *lp)
|
|
{
|
|
writel( VAL1|MPPLBA, lp->mmio + CMD3);
|
|
writel( VAL0|MPEN_SW, lp->mmio + CMD7);
|
|
|
|
/* To eliminate PCI posting bug */
|
|
readl(lp->mmio + CMD7);
|
|
return 0;
|
|
}
|
|
|
|
static int amd8111e_enable_link_change(struct amd8111e_priv *lp)
|
|
{
|
|
|
|
/* Adapter is already stoped/suspended/interrupt-disabled */
|
|
writel(VAL0|LCMODE_SW,lp->mmio + CMD7);
|
|
|
|
/* To eliminate PCI posting bug */
|
|
readl(lp->mmio + CMD7);
|
|
return 0;
|
|
}
|
|
|
|
/* This function is called when a packet transmission fails to complete
|
|
* within a reasonable period, on the assumption that an interrupt have
|
|
* failed or the interface is locked up. This function will reinitialize
|
|
* the hardware.
|
|
*/
|
|
static void amd8111e_tx_timeout(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int err;
|
|
|
|
netdev_err(dev, "transmit timed out, resetting\n");
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
err = amd8111e_restart(dev);
|
|
spin_unlock_irq(&lp->lock);
|
|
if(!err)
|
|
netif_wake_queue(dev);
|
|
}
|
|
static int amd8111e_suspend(struct pci_dev *pci_dev, pm_message_t state)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pci_dev);
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
/* disable the interrupt */
|
|
spin_lock_irq(&lp->lock);
|
|
amd8111e_disable_interrupt(lp);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
netif_device_detach(dev);
|
|
|
|
/* stop chip */
|
|
spin_lock_irq(&lp->lock);
|
|
if(lp->options & OPTION_DYN_IPG_ENABLE)
|
|
del_timer_sync(&lp->ipg_data.ipg_timer);
|
|
amd8111e_stop_chip(lp);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
if(lp->options & OPTION_WOL_ENABLE){
|
|
/* enable wol */
|
|
if(lp->options & OPTION_WAKE_MAGIC_ENABLE)
|
|
amd8111e_enable_magicpkt(lp);
|
|
if(lp->options & OPTION_WAKE_PHY_ENABLE)
|
|
amd8111e_enable_link_change(lp);
|
|
|
|
pci_enable_wake(pci_dev, PCI_D3hot, 1);
|
|
pci_enable_wake(pci_dev, PCI_D3cold, 1);
|
|
|
|
}
|
|
else{
|
|
pci_enable_wake(pci_dev, PCI_D3hot, 0);
|
|
pci_enable_wake(pci_dev, PCI_D3cold, 0);
|
|
}
|
|
|
|
pci_save_state(pci_dev);
|
|
pci_set_power_state(pci_dev, PCI_D3hot);
|
|
|
|
return 0;
|
|
}
|
|
static int amd8111e_resume(struct pci_dev *pci_dev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pci_dev);
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
|
|
if (!netif_running(dev))
|
|
return 0;
|
|
|
|
pci_set_power_state(pci_dev, PCI_D0);
|
|
pci_restore_state(pci_dev);
|
|
|
|
pci_enable_wake(pci_dev, PCI_D3hot, 0);
|
|
pci_enable_wake(pci_dev, PCI_D3cold, 0); /* D3 cold */
|
|
|
|
netif_device_attach(dev);
|
|
|
|
spin_lock_irq(&lp->lock);
|
|
amd8111e_restart(dev);
|
|
/* Restart ipg timer */
|
|
if(lp->options & OPTION_DYN_IPG_ENABLE)
|
|
mod_timer(&lp->ipg_data.ipg_timer,
|
|
jiffies + IPG_CONVERGE_JIFFIES);
|
|
spin_unlock_irq(&lp->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void amd8111e_config_ipg(struct timer_list *t)
|
|
{
|
|
struct amd8111e_priv *lp = from_timer(lp, t, ipg_data.ipg_timer);
|
|
struct ipg_info *ipg_data = &lp->ipg_data;
|
|
void __iomem *mmio = lp->mmio;
|
|
unsigned int prev_col_cnt = ipg_data->col_cnt;
|
|
unsigned int total_col_cnt;
|
|
unsigned int tmp_ipg;
|
|
|
|
if(lp->link_config.duplex == DUPLEX_FULL){
|
|
ipg_data->ipg = DEFAULT_IPG;
|
|
return;
|
|
}
|
|
|
|
if(ipg_data->ipg_state == SSTATE){
|
|
|
|
if(ipg_data->timer_tick == IPG_STABLE_TIME){
|
|
|
|
ipg_data->timer_tick = 0;
|
|
ipg_data->ipg = MIN_IPG - IPG_STEP;
|
|
ipg_data->current_ipg = MIN_IPG;
|
|
ipg_data->diff_col_cnt = 0xFFFFFFFF;
|
|
ipg_data->ipg_state = CSTATE;
|
|
}
|
|
else
|
|
ipg_data->timer_tick++;
|
|
}
|
|
|
|
if(ipg_data->ipg_state == CSTATE){
|
|
|
|
/* Get the current collision count */
|
|
|
|
total_col_cnt = ipg_data->col_cnt =
|
|
amd8111e_read_mib(mmio, xmt_collisions);
|
|
|
|
if ((total_col_cnt - prev_col_cnt) <
|
|
(ipg_data->diff_col_cnt)){
|
|
|
|
ipg_data->diff_col_cnt =
|
|
total_col_cnt - prev_col_cnt ;
|
|
|
|
ipg_data->ipg = ipg_data->current_ipg;
|
|
}
|
|
|
|
ipg_data->current_ipg += IPG_STEP;
|
|
|
|
if (ipg_data->current_ipg <= MAX_IPG)
|
|
tmp_ipg = ipg_data->current_ipg;
|
|
else{
|
|
tmp_ipg = ipg_data->ipg;
|
|
ipg_data->ipg_state = SSTATE;
|
|
}
|
|
writew((u32)tmp_ipg, mmio + IPG);
|
|
writew((u32)(tmp_ipg - IFS1_DELTA), mmio + IFS1);
|
|
}
|
|
mod_timer(&lp->ipg_data.ipg_timer, jiffies + IPG_CONVERGE_JIFFIES);
|
|
return;
|
|
|
|
}
|
|
|
|
static void amd8111e_probe_ext_phy(struct net_device *dev)
|
|
{
|
|
struct amd8111e_priv *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
for (i = 0x1e; i >= 0; i--) {
|
|
u32 id1, id2;
|
|
|
|
if (amd8111e_read_phy(lp, i, MII_PHYSID1, &id1))
|
|
continue;
|
|
if (amd8111e_read_phy(lp, i, MII_PHYSID2, &id2))
|
|
continue;
|
|
lp->ext_phy_id = (id1 << 16) | id2;
|
|
lp->ext_phy_addr = i;
|
|
return;
|
|
}
|
|
lp->ext_phy_id = 0;
|
|
lp->ext_phy_addr = 1;
|
|
}
|
|
|
|
static const struct net_device_ops amd8111e_netdev_ops = {
|
|
.ndo_open = amd8111e_open,
|
|
.ndo_stop = amd8111e_close,
|
|
.ndo_start_xmit = amd8111e_start_xmit,
|
|
.ndo_tx_timeout = amd8111e_tx_timeout,
|
|
.ndo_get_stats = amd8111e_get_stats,
|
|
.ndo_set_rx_mode = amd8111e_set_multicast_list,
|
|
.ndo_validate_addr = eth_validate_addr,
|
|
.ndo_set_mac_address = amd8111e_set_mac_address,
|
|
.ndo_do_ioctl = amd8111e_ioctl,
|
|
.ndo_change_mtu = amd8111e_change_mtu,
|
|
#ifdef CONFIG_NET_POLL_CONTROLLER
|
|
.ndo_poll_controller = amd8111e_poll,
|
|
#endif
|
|
};
|
|
|
|
static int amd8111e_probe_one(struct pci_dev *pdev,
|
|
const struct pci_device_id *ent)
|
|
{
|
|
int err, i;
|
|
unsigned long reg_addr,reg_len;
|
|
struct amd8111e_priv *lp;
|
|
struct net_device *dev;
|
|
|
|
err = pci_enable_device(pdev);
|
|
if(err){
|
|
dev_err(&pdev->dev, "Cannot enable new PCI device\n");
|
|
return err;
|
|
}
|
|
|
|
if(!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)){
|
|
dev_err(&pdev->dev, "Cannot find PCI base address\n");
|
|
err = -ENODEV;
|
|
goto err_disable_pdev;
|
|
}
|
|
|
|
err = pci_request_regions(pdev, MODULE_NAME);
|
|
if(err){
|
|
dev_err(&pdev->dev, "Cannot obtain PCI resources\n");
|
|
goto err_disable_pdev;
|
|
}
|
|
|
|
pci_set_master(pdev);
|
|
|
|
/* Find power-management capability. */
|
|
if (!pdev->pm_cap) {
|
|
dev_err(&pdev->dev, "No Power Management capability\n");
|
|
err = -ENODEV;
|
|
goto err_free_reg;
|
|
}
|
|
|
|
/* Initialize DMA */
|
|
if (pci_set_dma_mask(pdev, DMA_BIT_MASK(32)) < 0) {
|
|
dev_err(&pdev->dev, "DMA not supported\n");
|
|
err = -ENODEV;
|
|
goto err_free_reg;
|
|
}
|
|
|
|
reg_addr = pci_resource_start(pdev, 0);
|
|
reg_len = pci_resource_len(pdev, 0);
|
|
|
|
dev = alloc_etherdev(sizeof(struct amd8111e_priv));
|
|
if (!dev) {
|
|
err = -ENOMEM;
|
|
goto err_free_reg;
|
|
}
|
|
|
|
SET_NETDEV_DEV(dev, &pdev->dev);
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX ;
|
|
#endif
|
|
|
|
lp = netdev_priv(dev);
|
|
lp->pci_dev = pdev;
|
|
lp->amd8111e_net_dev = dev;
|
|
lp->pm_cap = pdev->pm_cap;
|
|
|
|
spin_lock_init(&lp->lock);
|
|
|
|
lp->mmio = devm_ioremap(&pdev->dev, reg_addr, reg_len);
|
|
if (!lp->mmio) {
|
|
dev_err(&pdev->dev, "Cannot map device registers\n");
|
|
err = -ENOMEM;
|
|
goto err_free_dev;
|
|
}
|
|
|
|
/* Initializing MAC address */
|
|
for (i = 0; i < ETH_ALEN; i++)
|
|
dev->dev_addr[i] = readb(lp->mmio + PADR + i);
|
|
|
|
/* Setting user defined parametrs */
|
|
lp->ext_phy_option = speed_duplex[card_idx];
|
|
if(coalesce[card_idx])
|
|
lp->options |= OPTION_INTR_COAL_ENABLE;
|
|
if(dynamic_ipg[card_idx++])
|
|
lp->options |= OPTION_DYN_IPG_ENABLE;
|
|
|
|
|
|
/* Initialize driver entry points */
|
|
dev->netdev_ops = &amd8111e_netdev_ops;
|
|
dev->ethtool_ops = &ops;
|
|
dev->irq =pdev->irq;
|
|
dev->watchdog_timeo = AMD8111E_TX_TIMEOUT;
|
|
dev->min_mtu = AMD8111E_MIN_MTU;
|
|
dev->max_mtu = AMD8111E_MAX_MTU;
|
|
netif_napi_add(dev, &lp->napi, amd8111e_rx_poll, 32);
|
|
|
|
#if AMD8111E_VLAN_TAG_USED
|
|
dev->features |= NETIF_F_HW_VLAN_CTAG_TX | NETIF_F_HW_VLAN_CTAG_RX;
|
|
#endif
|
|
/* Probe the external PHY */
|
|
amd8111e_probe_ext_phy(dev);
|
|
|
|
/* setting mii default values */
|
|
lp->mii_if.dev = dev;
|
|
lp->mii_if.mdio_read = amd8111e_mdio_read;
|
|
lp->mii_if.mdio_write = amd8111e_mdio_write;
|
|
lp->mii_if.phy_id = lp->ext_phy_addr;
|
|
|
|
/* Set receive buffer length and set jumbo option*/
|
|
amd8111e_set_rx_buff_len(dev);
|
|
|
|
|
|
err = register_netdev(dev);
|
|
if (err) {
|
|
dev_err(&pdev->dev, "Cannot register net device\n");
|
|
goto err_free_dev;
|
|
}
|
|
|
|
pci_set_drvdata(pdev, dev);
|
|
|
|
/* Initialize software ipg timer */
|
|
if(lp->options & OPTION_DYN_IPG_ENABLE){
|
|
timer_setup(&lp->ipg_data.ipg_timer, amd8111e_config_ipg, 0);
|
|
lp->ipg_data.ipg_timer.expires = jiffies +
|
|
IPG_CONVERGE_JIFFIES;
|
|
lp->ipg_data.ipg = DEFAULT_IPG;
|
|
lp->ipg_data.ipg_state = CSTATE;
|
|
}
|
|
|
|
/* display driver and device information */
|
|
chip_version = (readl(lp->mmio + CHIPID) & 0xf0000000)>>28;
|
|
dev_info(&pdev->dev, "AMD-8111e Driver Version: %s\n", MODULE_VERS);
|
|
dev_info(&pdev->dev, "[ Rev %x ] PCI 10/100BaseT Ethernet %pM\n",
|
|
chip_version, dev->dev_addr);
|
|
if (lp->ext_phy_id)
|
|
dev_info(&pdev->dev, "Found MII PHY ID 0x%08x at address 0x%02x\n",
|
|
lp->ext_phy_id, lp->ext_phy_addr);
|
|
else
|
|
dev_info(&pdev->dev, "Couldn't detect MII PHY, assuming address 0x01\n");
|
|
|
|
return 0;
|
|
|
|
err_free_dev:
|
|
free_netdev(dev);
|
|
|
|
err_free_reg:
|
|
pci_release_regions(pdev);
|
|
|
|
err_disable_pdev:
|
|
pci_disable_device(pdev);
|
|
return err;
|
|
|
|
}
|
|
|
|
static void amd8111e_remove_one(struct pci_dev *pdev)
|
|
{
|
|
struct net_device *dev = pci_get_drvdata(pdev);
|
|
|
|
if (dev) {
|
|
unregister_netdev(dev);
|
|
free_netdev(dev);
|
|
pci_release_regions(pdev);
|
|
pci_disable_device(pdev);
|
|
}
|
|
}
|
|
|
|
static const struct pci_device_id amd8111e_pci_tbl[] = {
|
|
{
|
|
.vendor = PCI_VENDOR_ID_AMD,
|
|
.device = PCI_DEVICE_ID_AMD8111E_7462,
|
|
},
|
|
{
|
|
.vendor = 0,
|
|
}
|
|
};
|
|
MODULE_DEVICE_TABLE(pci, amd8111e_pci_tbl);
|
|
|
|
static struct pci_driver amd8111e_driver = {
|
|
.name = MODULE_NAME,
|
|
.id_table = amd8111e_pci_tbl,
|
|
.probe = amd8111e_probe_one,
|
|
.remove = amd8111e_remove_one,
|
|
.suspend = amd8111e_suspend,
|
|
.resume = amd8111e_resume
|
|
};
|
|
|
|
module_pci_driver(amd8111e_driver);
|