435 lines
9.7 KiB
C
435 lines
9.7 KiB
C
/*
|
|
* i2c-au1550.c: SMBus (i2c) adapter for Alchemy PSC interface
|
|
* Copyright (C) 2004 Embedded Edge, LLC <dan@embeddededge.com>
|
|
*
|
|
* 2.6 port by Matt Porter <mporter@kernel.crashing.org>
|
|
*
|
|
* The documentation describes this as an SMBus controller, but it doesn't
|
|
* understand any of the SMBus protocol in hardware. It's really an I2C
|
|
* controller that could emulate most of the SMBus in software.
|
|
*
|
|
* This is just a skeleton adapter to use with the Au1550 PSC
|
|
* algorithm. It was developed for the Pb1550, but will work with
|
|
* any Au1550 board that has a similar PSC configuration.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <asm/mach-au1x00/au1000.h>
|
|
#include <asm/mach-au1x00/au1xxx_psc.h>
|
|
|
|
#define PSC_SEL 0x00
|
|
#define PSC_CTRL 0x04
|
|
#define PSC_SMBCFG 0x08
|
|
#define PSC_SMBMSK 0x0C
|
|
#define PSC_SMBPCR 0x10
|
|
#define PSC_SMBSTAT 0x14
|
|
#define PSC_SMBEVNT 0x18
|
|
#define PSC_SMBTXRX 0x1C
|
|
#define PSC_SMBTMR 0x20
|
|
|
|
struct i2c_au1550_data {
|
|
void __iomem *psc_base;
|
|
int xfer_timeout;
|
|
struct i2c_adapter adap;
|
|
struct resource *ioarea;
|
|
};
|
|
|
|
static inline void WR(struct i2c_au1550_data *a, int r, unsigned long v)
|
|
{
|
|
__raw_writel(v, a->psc_base + r);
|
|
wmb();
|
|
}
|
|
|
|
static inline unsigned long RD(struct i2c_au1550_data *a, int r)
|
|
{
|
|
return __raw_readl(a->psc_base + r);
|
|
}
|
|
|
|
static int wait_xfer_done(struct i2c_au1550_data *adap)
|
|
{
|
|
int i;
|
|
|
|
/* Wait for Tx Buffer Empty */
|
|
for (i = 0; i < adap->xfer_timeout; i++) {
|
|
if (RD(adap, PSC_SMBSTAT) & PSC_SMBSTAT_TE)
|
|
return 0;
|
|
|
|
udelay(1);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int wait_ack(struct i2c_au1550_data *adap)
|
|
{
|
|
unsigned long stat;
|
|
|
|
if (wait_xfer_done(adap))
|
|
return -ETIMEDOUT;
|
|
|
|
stat = RD(adap, PSC_SMBEVNT);
|
|
if ((stat & (PSC_SMBEVNT_DN | PSC_SMBEVNT_AN | PSC_SMBEVNT_AL)) != 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wait_master_done(struct i2c_au1550_data *adap)
|
|
{
|
|
int i;
|
|
|
|
/* Wait for Master Done. */
|
|
for (i = 0; i < 2 * adap->xfer_timeout; i++) {
|
|
if ((RD(adap, PSC_SMBEVNT) & PSC_SMBEVNT_MD) != 0)
|
|
return 0;
|
|
udelay(1);
|
|
}
|
|
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
static int
|
|
do_address(struct i2c_au1550_data *adap, unsigned int addr, int rd, int q)
|
|
{
|
|
unsigned long stat;
|
|
|
|
/* Reset the FIFOs, clear events. */
|
|
stat = RD(adap, PSC_SMBSTAT);
|
|
WR(adap, PSC_SMBEVNT, PSC_SMBEVNT_ALLCLR);
|
|
|
|
if (!(stat & PSC_SMBSTAT_TE) || !(stat & PSC_SMBSTAT_RE)) {
|
|
WR(adap, PSC_SMBPCR, PSC_SMBPCR_DC);
|
|
while ((RD(adap, PSC_SMBPCR) & PSC_SMBPCR_DC) != 0)
|
|
cpu_relax();
|
|
udelay(50);
|
|
}
|
|
|
|
/* Write out the i2c chip address and specify operation */
|
|
addr <<= 1;
|
|
if (rd)
|
|
addr |= 1;
|
|
|
|
/* zero-byte xfers stop immediately */
|
|
if (q)
|
|
addr |= PSC_SMBTXRX_STP;
|
|
|
|
/* Put byte into fifo, start up master. */
|
|
WR(adap, PSC_SMBTXRX, addr);
|
|
WR(adap, PSC_SMBPCR, PSC_SMBPCR_MS);
|
|
if (wait_ack(adap))
|
|
return -EIO;
|
|
return (q) ? wait_master_done(adap) : 0;
|
|
}
|
|
|
|
static int wait_for_rx_byte(struct i2c_au1550_data *adap, unsigned char *out)
|
|
{
|
|
int j;
|
|
|
|
if (wait_xfer_done(adap))
|
|
return -EIO;
|
|
|
|
j = adap->xfer_timeout * 100;
|
|
do {
|
|
j--;
|
|
if (j <= 0)
|
|
return -EIO;
|
|
|
|
if ((RD(adap, PSC_SMBSTAT) & PSC_SMBSTAT_RE) == 0)
|
|
j = 0;
|
|
else
|
|
udelay(1);
|
|
} while (j > 0);
|
|
|
|
*out = RD(adap, PSC_SMBTXRX);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_read(struct i2c_au1550_data *adap, unsigned char *buf,
|
|
unsigned int len)
|
|
{
|
|
int i;
|
|
|
|
if (len == 0)
|
|
return 0;
|
|
|
|
/* A read is performed by stuffing the transmit fifo with
|
|
* zero bytes for timing, waiting for bytes to appear in the
|
|
* receive fifo, then reading the bytes.
|
|
*/
|
|
i = 0;
|
|
while (i < (len - 1)) {
|
|
WR(adap, PSC_SMBTXRX, 0);
|
|
if (wait_for_rx_byte(adap, &buf[i]))
|
|
return -EIO;
|
|
|
|
i++;
|
|
}
|
|
|
|
/* The last byte has to indicate transfer done. */
|
|
WR(adap, PSC_SMBTXRX, PSC_SMBTXRX_STP);
|
|
if (wait_master_done(adap))
|
|
return -EIO;
|
|
|
|
buf[i] = (unsigned char)(RD(adap, PSC_SMBTXRX) & 0xff);
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_write(struct i2c_au1550_data *adap, unsigned char *buf,
|
|
unsigned int len)
|
|
{
|
|
int i;
|
|
unsigned long data;
|
|
|
|
if (len == 0)
|
|
return 0;
|
|
|
|
i = 0;
|
|
while (i < (len-1)) {
|
|
data = buf[i];
|
|
WR(adap, PSC_SMBTXRX, data);
|
|
if (wait_ack(adap))
|
|
return -EIO;
|
|
i++;
|
|
}
|
|
|
|
/* The last byte has to indicate transfer done. */
|
|
data = buf[i];
|
|
data |= PSC_SMBTXRX_STP;
|
|
WR(adap, PSC_SMBTXRX, data);
|
|
if (wait_master_done(adap))
|
|
return -EIO;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
au1550_xfer(struct i2c_adapter *i2c_adap, struct i2c_msg *msgs, int num)
|
|
{
|
|
struct i2c_au1550_data *adap = i2c_adap->algo_data;
|
|
struct i2c_msg *p;
|
|
int i, err = 0;
|
|
|
|
WR(adap, PSC_CTRL, PSC_CTRL_ENABLE);
|
|
|
|
for (i = 0; !err && i < num; i++) {
|
|
p = &msgs[i];
|
|
err = do_address(adap, p->addr, p->flags & I2C_M_RD,
|
|
(p->len == 0));
|
|
if (err || !p->len)
|
|
continue;
|
|
if (p->flags & I2C_M_RD)
|
|
err = i2c_read(adap, p->buf, p->len);
|
|
else
|
|
err = i2c_write(adap, p->buf, p->len);
|
|
}
|
|
|
|
/* Return the number of messages processed, or the error code.
|
|
*/
|
|
if (err == 0)
|
|
err = num;
|
|
|
|
WR(adap, PSC_CTRL, PSC_CTRL_SUSPEND);
|
|
|
|
return err;
|
|
}
|
|
|
|
static u32 au1550_func(struct i2c_adapter *adap)
|
|
{
|
|
return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
|
|
}
|
|
|
|
static const struct i2c_algorithm au1550_algo = {
|
|
.master_xfer = au1550_xfer,
|
|
.functionality = au1550_func,
|
|
};
|
|
|
|
static void i2c_au1550_setup(struct i2c_au1550_data *priv)
|
|
{
|
|
unsigned long cfg;
|
|
|
|
WR(priv, PSC_CTRL, PSC_CTRL_DISABLE);
|
|
WR(priv, PSC_SEL, PSC_SEL_PS_SMBUSMODE);
|
|
WR(priv, PSC_SMBCFG, 0);
|
|
WR(priv, PSC_CTRL, PSC_CTRL_ENABLE);
|
|
while ((RD(priv, PSC_SMBSTAT) & PSC_SMBSTAT_SR) == 0)
|
|
cpu_relax();
|
|
|
|
cfg = PSC_SMBCFG_RT_FIFO8 | PSC_SMBCFG_TT_FIFO8 | PSC_SMBCFG_DD_DISABLE;
|
|
WR(priv, PSC_SMBCFG, cfg);
|
|
|
|
/* Divide by 8 to get a 6.25 MHz clock. The later protocol
|
|
* timings are based on this clock.
|
|
*/
|
|
cfg |= PSC_SMBCFG_SET_DIV(PSC_SMBCFG_DIV8);
|
|
WR(priv, PSC_SMBCFG, cfg);
|
|
WR(priv, PSC_SMBMSK, PSC_SMBMSK_ALLMASK);
|
|
|
|
/* Set the protocol timer values. See Table 71 in the
|
|
* Au1550 Data Book for standard timing values.
|
|
*/
|
|
WR(priv, PSC_SMBTMR, PSC_SMBTMR_SET_TH(0) | PSC_SMBTMR_SET_PS(15) | \
|
|
PSC_SMBTMR_SET_PU(15) | PSC_SMBTMR_SET_SH(15) | \
|
|
PSC_SMBTMR_SET_SU(15) | PSC_SMBTMR_SET_CL(15) | \
|
|
PSC_SMBTMR_SET_CH(15));
|
|
|
|
cfg |= PSC_SMBCFG_DE_ENABLE;
|
|
WR(priv, PSC_SMBCFG, cfg);
|
|
while ((RD(priv, PSC_SMBSTAT) & PSC_SMBSTAT_SR) == 0)
|
|
cpu_relax();
|
|
|
|
WR(priv, PSC_CTRL, PSC_CTRL_SUSPEND);
|
|
}
|
|
|
|
static void i2c_au1550_disable(struct i2c_au1550_data *priv)
|
|
{
|
|
WR(priv, PSC_SMBCFG, 0);
|
|
WR(priv, PSC_CTRL, PSC_CTRL_DISABLE);
|
|
}
|
|
|
|
/*
|
|
* registering functions to load algorithms at runtime
|
|
* Prior to calling us, the 50MHz clock frequency and routing
|
|
* must have been set up for the PSC indicated by the adapter.
|
|
*/
|
|
static int
|
|
i2c_au1550_probe(struct platform_device *pdev)
|
|
{
|
|
struct i2c_au1550_data *priv;
|
|
struct resource *r;
|
|
int ret;
|
|
|
|
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
|
if (!r) {
|
|
ret = -ENODEV;
|
|
goto out;
|
|
}
|
|
|
|
priv = kzalloc(sizeof(struct i2c_au1550_data), GFP_KERNEL);
|
|
if (!priv) {
|
|
ret = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
priv->ioarea = request_mem_region(r->start, resource_size(r),
|
|
pdev->name);
|
|
if (!priv->ioarea) {
|
|
ret = -EBUSY;
|
|
goto out_mem;
|
|
}
|
|
|
|
priv->psc_base = ioremap(r->start, resource_size(r));
|
|
if (!priv->psc_base) {
|
|
ret = -EIO;
|
|
goto out_map;
|
|
}
|
|
priv->xfer_timeout = 200;
|
|
|
|
priv->adap.nr = pdev->id;
|
|
priv->adap.algo = &au1550_algo;
|
|
priv->adap.algo_data = priv;
|
|
priv->adap.dev.parent = &pdev->dev;
|
|
strlcpy(priv->adap.name, "Au1xxx PSC I2C", sizeof(priv->adap.name));
|
|
|
|
/* Now, set up the PSC for SMBus PIO mode. */
|
|
i2c_au1550_setup(priv);
|
|
|
|
ret = i2c_add_numbered_adapter(&priv->adap);
|
|
if (ret == 0) {
|
|
platform_set_drvdata(pdev, priv);
|
|
return 0;
|
|
}
|
|
|
|
i2c_au1550_disable(priv);
|
|
iounmap(priv->psc_base);
|
|
out_map:
|
|
release_resource(priv->ioarea);
|
|
kfree(priv->ioarea);
|
|
out_mem:
|
|
kfree(priv);
|
|
out:
|
|
return ret;
|
|
}
|
|
|
|
static int i2c_au1550_remove(struct platform_device *pdev)
|
|
{
|
|
struct i2c_au1550_data *priv = platform_get_drvdata(pdev);
|
|
|
|
platform_set_drvdata(pdev, NULL);
|
|
i2c_del_adapter(&priv->adap);
|
|
i2c_au1550_disable(priv);
|
|
iounmap(priv->psc_base);
|
|
release_resource(priv->ioarea);
|
|
kfree(priv->ioarea);
|
|
kfree(priv);
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int i2c_au1550_suspend(struct device *dev)
|
|
{
|
|
struct i2c_au1550_data *priv = dev_get_drvdata(dev);
|
|
|
|
i2c_au1550_disable(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int i2c_au1550_resume(struct device *dev)
|
|
{
|
|
struct i2c_au1550_data *priv = dev_get_drvdata(dev);
|
|
|
|
i2c_au1550_setup(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dev_pm_ops i2c_au1550_pmops = {
|
|
.suspend = i2c_au1550_suspend,
|
|
.resume = i2c_au1550_resume,
|
|
};
|
|
|
|
#define AU1XPSC_SMBUS_PMOPS (&i2c_au1550_pmops)
|
|
|
|
#else
|
|
#define AU1XPSC_SMBUS_PMOPS NULL
|
|
#endif
|
|
|
|
static struct platform_driver au1xpsc_smbus_driver = {
|
|
.driver = {
|
|
.name = "au1xpsc_smbus",
|
|
.owner = THIS_MODULE,
|
|
.pm = AU1XPSC_SMBUS_PMOPS,
|
|
},
|
|
.probe = i2c_au1550_probe,
|
|
.remove = i2c_au1550_remove,
|
|
};
|
|
|
|
module_platform_driver(au1xpsc_smbus_driver);
|
|
|
|
MODULE_AUTHOR("Dan Malek, Embedded Edge, LLC.");
|
|
MODULE_DESCRIPTION("SMBus adapter Alchemy pb1550");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:au1xpsc_smbus");
|