214 lines
7.5 KiB
ReStructuredText
214 lines
7.5 KiB
ReStructuredText
.. SPDX-License-Identifier: GPL-2.0+
|
|
|
|
===========================================================
|
|
Linux* Base Driver for Intel(R) Ethernet Network Connection
|
|
===========================================================
|
|
|
|
Intel Gigabit Linux driver.
|
|
Copyright(c) 1999-2018 Intel Corporation.
|
|
|
|
Contents
|
|
========
|
|
|
|
- Identifying Your Adapter
|
|
- Command Line Parameters
|
|
- Additional Configurations
|
|
- Support
|
|
|
|
|
|
Identifying Your Adapter
|
|
========================
|
|
For information on how to identify your adapter, and for the latest Intel
|
|
network drivers, refer to the Intel Support website:
|
|
http://www.intel.com/support
|
|
|
|
|
|
Command Line Parameters
|
|
========================
|
|
If the driver is built as a module, the following optional parameters are used
|
|
by entering them on the command line with the modprobe command using this
|
|
syntax::
|
|
|
|
modprobe igb [<option>=<VAL1>,<VAL2>,...]
|
|
|
|
There needs to be a <VAL#> for each network port in the system supported by
|
|
this driver. The values will be applied to each instance, in function order.
|
|
For example::
|
|
|
|
modprobe igb max_vfs=2,4
|
|
|
|
In this case, there are two network ports supported by igb in the system.
|
|
|
|
NOTE: A descriptor describes a data buffer and attributes related to the data
|
|
buffer. This information is accessed by the hardware.
|
|
|
|
max_vfs
|
|
-------
|
|
:Valid Range: 0-7
|
|
|
|
This parameter adds support for SR-IOV. It causes the driver to spawn up to
|
|
max_vfs worth of virtual functions. If the value is greater than 0 it will
|
|
also force the VMDq parameter to be 1 or more.
|
|
|
|
The parameters for the driver are referenced by position. Thus, if you have a
|
|
dual port adapter, or more than one adapter in your system, and want N virtual
|
|
functions per port, you must specify a number for each port with each parameter
|
|
separated by a comma. For example::
|
|
|
|
modprobe igb max_vfs=4
|
|
|
|
This will spawn 4 VFs on the first port.
|
|
|
|
::
|
|
|
|
modprobe igb max_vfs=2,4
|
|
|
|
This will spawn 2 VFs on the first port and 4 VFs on the second port.
|
|
|
|
NOTE: Caution must be used in loading the driver with these parameters.
|
|
Depending on your system configuration, number of slots, etc., it is impossible
|
|
to predict in all cases where the positions would be on the command line.
|
|
|
|
NOTE: Neither the device nor the driver control how VFs are mapped into config
|
|
space. Bus layout will vary by operating system. On operating systems that
|
|
support it, you can check sysfs to find the mapping.
|
|
|
|
NOTE: When either SR-IOV mode or VMDq mode is enabled, hardware VLAN filtering
|
|
and VLAN tag stripping/insertion will remain enabled. Please remove the old
|
|
VLAN filter before the new VLAN filter is added. For example::
|
|
|
|
ip link set eth0 vf 0 vlan 100 // set vlan 100 for VF 0
|
|
ip link set eth0 vf 0 vlan 0 // Delete vlan 100
|
|
ip link set eth0 vf 0 vlan 200 // set a new vlan 200 for VF 0
|
|
|
|
Debug
|
|
-----
|
|
:Valid Range: 0-16 (0=none,...,16=all)
|
|
:Default Value: 0
|
|
|
|
This parameter adjusts the level debug messages displayed in the system logs.
|
|
|
|
|
|
Additional Features and Configurations
|
|
======================================
|
|
|
|
Jumbo Frames
|
|
------------
|
|
Jumbo Frames support is enabled by changing the Maximum Transmission Unit (MTU)
|
|
to a value larger than the default value of 1500.
|
|
|
|
Use the ifconfig command to increase the MTU size. For example, enter the
|
|
following where <x> is the interface number::
|
|
|
|
ifconfig eth<x> mtu 9000 up
|
|
|
|
Alternatively, you can use the ip command as follows::
|
|
|
|
ip link set mtu 9000 dev eth<x>
|
|
ip link set up dev eth<x>
|
|
|
|
This setting is not saved across reboots. The setting change can be made
|
|
permanent by adding 'MTU=9000' to the file:
|
|
|
|
- For RHEL: /etc/sysconfig/network-scripts/ifcfg-eth<x>
|
|
- For SLES: /etc/sysconfig/network/<config_file>
|
|
|
|
NOTE: The maximum MTU setting for Jumbo Frames is 9216. This value coincides
|
|
with the maximum Jumbo Frames size of 9234 bytes.
|
|
|
|
NOTE: Using Jumbo frames at 10 or 100 Mbps is not supported and may result in
|
|
poor performance or loss of link.
|
|
|
|
|
|
ethtool
|
|
-------
|
|
The driver utilizes the ethtool interface for driver configuration and
|
|
diagnostics, as well as displaying statistical information. The latest ethtool
|
|
version is required for this functionality. Download it at:
|
|
|
|
https://www.kernel.org/pub/software/network/ethtool/
|
|
|
|
|
|
Enabling Wake on LAN* (WoL)
|
|
---------------------------
|
|
WoL is configured through the ethtool* utility.
|
|
|
|
WoL will be enabled on the system during the next shut down or reboot. For
|
|
this driver version, in order to enable WoL, the igb driver must be loaded
|
|
prior to shutting down or suspending the system.
|
|
|
|
NOTE: Wake on LAN is only supported on port A of multi-port devices. Also
|
|
Wake On LAN is not supported for the following device:
|
|
- Intel(R) Gigabit VT Quad Port Server Adapter
|
|
|
|
|
|
Multiqueue
|
|
----------
|
|
In this mode, a separate MSI-X vector is allocated for each queue and one for
|
|
"other" interrupts such as link status change and errors. All interrupts are
|
|
throttled via interrupt moderation. Interrupt moderation must be used to avoid
|
|
interrupt storms while the driver is processing one interrupt. The moderation
|
|
value should be at least as large as the expected time for the driver to
|
|
process an interrupt. Multiqueue is off by default.
|
|
|
|
REQUIREMENTS: MSI-X support is required for Multiqueue. If MSI-X is not found,
|
|
the system will fallback to MSI or to Legacy interrupts. This driver supports
|
|
receive multiqueue on all kernels that support MSI-X.
|
|
|
|
NOTE: On some kernels a reboot is required to switch between single queue mode
|
|
and multiqueue mode or vice-versa.
|
|
|
|
|
|
MAC and VLAN anti-spoofing feature
|
|
----------------------------------
|
|
When a malicious driver attempts to send a spoofed packet, it is dropped by the
|
|
hardware and not transmitted.
|
|
|
|
An interrupt is sent to the PF driver notifying it of the spoof attempt. When a
|
|
spoofed packet is detected, the PF driver will send the following message to
|
|
the system log (displayed by the "dmesg" command):
|
|
Spoof event(s) detected on VF(n), where n = the VF that attempted to do the
|
|
spoofing
|
|
|
|
|
|
Setting MAC Address, VLAN and Rate Limit Using IProute2 Tool
|
|
------------------------------------------------------------
|
|
You can set a MAC address of a Virtual Function (VF), a default VLAN and the
|
|
rate limit using the IProute2 tool. Download the latest version of the
|
|
IProute2 tool from Sourceforge if your version does not have all the features
|
|
you require.
|
|
|
|
Credit Based Shaper (Qav Mode)
|
|
------------------------------
|
|
When enabling the CBS qdisc in the hardware offload mode, traffic shaping using
|
|
the CBS (described in the IEEE 802.1Q-2018 Section 8.6.8.2 and discussed in the
|
|
Annex L) algorithm will run in the i210 controller, so it's more accurate and
|
|
uses less CPU.
|
|
|
|
When using offloaded CBS, and the traffic rate obeys the configured rate
|
|
(doesn't go above it), CBS should have little to no effect in the latency.
|
|
|
|
The offloaded version of the algorithm has some limits, caused by how the idle
|
|
slope is expressed in the adapter's registers. It can only represent idle slopes
|
|
in 16.38431 kbps units, which means that if a idle slope of 2576kbps is
|
|
requested, the controller will be configured to use a idle slope of ~2589 kbps,
|
|
because the driver rounds the value up. For more details, see the comments on
|
|
:c:func:`igb_config_tx_modes()`.
|
|
|
|
NOTE: This feature is exclusive to i210 models.
|
|
|
|
|
|
Support
|
|
=======
|
|
For general information, go to the Intel support website at:
|
|
|
|
https://www.intel.com/support/
|
|
|
|
or the Intel Wired Networking project hosted by Sourceforge at:
|
|
|
|
https://sourceforge.net/projects/e1000
|
|
|
|
If an issue is identified with the released source code on a supported kernel
|
|
with a supported adapter, email the specific information related to the issue
|
|
to e1000-devel@lists.sf.net.
|