1105 lines
29 KiB
C
1105 lines
29 KiB
C
/*
|
|
* Copyright (c) 2016, The Linux Foundation. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 and
|
|
* only version 2 as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/clk.h>
|
|
#include <linux/clk-provider.h>
|
|
|
|
#include "dsi_pll.h"
|
|
#include "dsi.xml.h"
|
|
|
|
/*
|
|
* DSI PLL 14nm - clock diagram (eg: DSI0):
|
|
*
|
|
* dsi0n1_postdiv_clk
|
|
* |
|
|
* |
|
|
* +----+ | +----+
|
|
* dsi0vco_clk ---| n1 |--o--| /8 |-- dsi0pllbyte
|
|
* +----+ | +----+
|
|
* | dsi0n1_postdivby2_clk
|
|
* | +----+ |
|
|
* o---| /2 |--o--|\
|
|
* | +----+ | \ +----+
|
|
* | | |--| n2 |-- dsi0pll
|
|
* o--------------| / +----+
|
|
* |/
|
|
*/
|
|
|
|
#define POLL_MAX_READS 15
|
|
#define POLL_TIMEOUT_US 1000
|
|
|
|
#define NUM_PROVIDED_CLKS 2
|
|
|
|
#define VCO_REF_CLK_RATE 19200000
|
|
#define VCO_MIN_RATE 1300000000UL
|
|
#define VCO_MAX_RATE 2600000000UL
|
|
|
|
#define DSI_BYTE_PLL_CLK 0
|
|
#define DSI_PIXEL_PLL_CLK 1
|
|
|
|
#define DSI_PLL_DEFAULT_VCO_POSTDIV 1
|
|
|
|
struct dsi_pll_input {
|
|
u32 fref; /* reference clk */
|
|
u32 fdata; /* bit clock rate */
|
|
u32 dsiclk_sel; /* Mux configuration (see diagram) */
|
|
u32 ssc_en; /* SSC enable/disable */
|
|
u32 ldo_en;
|
|
|
|
/* fixed params */
|
|
u32 refclk_dbler_en;
|
|
u32 vco_measure_time;
|
|
u32 kvco_measure_time;
|
|
u32 bandgap_timer;
|
|
u32 pll_wakeup_timer;
|
|
u32 plllock_cnt;
|
|
u32 plllock_rng;
|
|
u32 ssc_center;
|
|
u32 ssc_adj_period;
|
|
u32 ssc_spread;
|
|
u32 ssc_freq;
|
|
u32 pll_ie_trim;
|
|
u32 pll_ip_trim;
|
|
u32 pll_iptat_trim;
|
|
u32 pll_cpcset_cur;
|
|
u32 pll_cpmset_cur;
|
|
|
|
u32 pll_icpmset;
|
|
u32 pll_icpcset;
|
|
|
|
u32 pll_icpmset_p;
|
|
u32 pll_icpmset_m;
|
|
|
|
u32 pll_icpcset_p;
|
|
u32 pll_icpcset_m;
|
|
|
|
u32 pll_lpf_res1;
|
|
u32 pll_lpf_cap1;
|
|
u32 pll_lpf_cap2;
|
|
u32 pll_c3ctrl;
|
|
u32 pll_r3ctrl;
|
|
};
|
|
|
|
struct dsi_pll_output {
|
|
u32 pll_txclk_en;
|
|
u32 dec_start;
|
|
u32 div_frac_start;
|
|
u32 ssc_period;
|
|
u32 ssc_step_size;
|
|
u32 plllock_cmp;
|
|
u32 pll_vco_div_ref;
|
|
u32 pll_vco_count;
|
|
u32 pll_kvco_div_ref;
|
|
u32 pll_kvco_count;
|
|
u32 pll_misc1;
|
|
u32 pll_lpf2_postdiv;
|
|
u32 pll_resetsm_cntrl;
|
|
u32 pll_resetsm_cntrl2;
|
|
u32 pll_resetsm_cntrl5;
|
|
u32 pll_kvco_code;
|
|
|
|
u32 cmn_clk_cfg0;
|
|
u32 cmn_clk_cfg1;
|
|
u32 cmn_ldo_cntrl;
|
|
|
|
u32 pll_postdiv;
|
|
u32 fcvo;
|
|
};
|
|
|
|
struct pll_14nm_cached_state {
|
|
unsigned long vco_rate;
|
|
u8 n2postdiv;
|
|
u8 n1postdiv;
|
|
};
|
|
|
|
struct dsi_pll_14nm {
|
|
struct msm_dsi_pll base;
|
|
|
|
int id;
|
|
struct platform_device *pdev;
|
|
|
|
void __iomem *phy_cmn_mmio;
|
|
void __iomem *mmio;
|
|
|
|
int vco_delay;
|
|
|
|
struct dsi_pll_input in;
|
|
struct dsi_pll_output out;
|
|
|
|
/* protects REG_DSI_14nm_PHY_CMN_CLK_CFG0 register */
|
|
spinlock_t postdiv_lock;
|
|
|
|
u64 vco_current_rate;
|
|
u64 vco_ref_clk_rate;
|
|
|
|
/* private clocks: */
|
|
struct clk_hw *hws[NUM_DSI_CLOCKS_MAX];
|
|
u32 num_hws;
|
|
|
|
/* clock-provider: */
|
|
struct clk_hw_onecell_data *hw_data;
|
|
|
|
struct pll_14nm_cached_state cached_state;
|
|
|
|
enum msm_dsi_phy_usecase uc;
|
|
struct dsi_pll_14nm *slave;
|
|
};
|
|
|
|
#define to_pll_14nm(x) container_of(x, struct dsi_pll_14nm, base)
|
|
|
|
/*
|
|
* Private struct for N1/N2 post-divider clocks. These clocks are similar to
|
|
* the generic clk_divider class of clocks. The only difference is that it
|
|
* also sets the slave DSI PLL's post-dividers if in Dual DSI mode
|
|
*/
|
|
struct dsi_pll_14nm_postdiv {
|
|
struct clk_hw hw;
|
|
|
|
/* divider params */
|
|
u8 shift;
|
|
u8 width;
|
|
u8 flags; /* same flags as used by clk_divider struct */
|
|
|
|
struct dsi_pll_14nm *pll;
|
|
};
|
|
|
|
#define to_pll_14nm_postdiv(_hw) container_of(_hw, struct dsi_pll_14nm_postdiv, hw)
|
|
|
|
/*
|
|
* Global list of private DSI PLL struct pointers. We need this for Dual DSI
|
|
* mode, where the master PLL's clk_ops needs access the slave's private data
|
|
*/
|
|
static struct dsi_pll_14nm *pll_14nm_list[DSI_MAX];
|
|
|
|
static bool pll_14nm_poll_for_ready(struct dsi_pll_14nm *pll_14nm,
|
|
u32 nb_tries, u32 timeout_us)
|
|
{
|
|
bool pll_locked = false;
|
|
void __iomem *base = pll_14nm->mmio;
|
|
u32 tries, val;
|
|
|
|
tries = nb_tries;
|
|
while (tries--) {
|
|
val = pll_read(base +
|
|
REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
|
|
pll_locked = !!(val & BIT(5));
|
|
|
|
if (pll_locked)
|
|
break;
|
|
|
|
udelay(timeout_us);
|
|
}
|
|
|
|
if (!pll_locked) {
|
|
tries = nb_tries;
|
|
while (tries--) {
|
|
val = pll_read(base +
|
|
REG_DSI_14nm_PHY_PLL_RESET_SM_READY_STATUS);
|
|
pll_locked = !!(val & BIT(0));
|
|
|
|
if (pll_locked)
|
|
break;
|
|
|
|
udelay(timeout_us);
|
|
}
|
|
}
|
|
|
|
DBG("DSI PLL is %slocked", pll_locked ? "" : "*not* ");
|
|
|
|
return pll_locked;
|
|
}
|
|
|
|
static void dsi_pll_14nm_input_init(struct dsi_pll_14nm *pll)
|
|
{
|
|
pll->in.fref = pll->vco_ref_clk_rate;
|
|
pll->in.fdata = 0;
|
|
pll->in.dsiclk_sel = 1; /* Use the /2 path in Mux */
|
|
pll->in.ldo_en = 0; /* disabled for now */
|
|
|
|
/* fixed input */
|
|
pll->in.refclk_dbler_en = 0;
|
|
pll->in.vco_measure_time = 5;
|
|
pll->in.kvco_measure_time = 5;
|
|
pll->in.bandgap_timer = 4;
|
|
pll->in.pll_wakeup_timer = 5;
|
|
pll->in.plllock_cnt = 1;
|
|
pll->in.plllock_rng = 0;
|
|
|
|
/*
|
|
* SSC is enabled by default. We might need DT props for configuring
|
|
* some SSC params like PPM and center/down spread etc.
|
|
*/
|
|
pll->in.ssc_en = 1;
|
|
pll->in.ssc_center = 0; /* down spread by default */
|
|
pll->in.ssc_spread = 5; /* PPM / 1000 */
|
|
pll->in.ssc_freq = 31500; /* default recommended */
|
|
pll->in.ssc_adj_period = 37;
|
|
|
|
pll->in.pll_ie_trim = 4;
|
|
pll->in.pll_ip_trim = 4;
|
|
pll->in.pll_cpcset_cur = 1;
|
|
pll->in.pll_cpmset_cur = 1;
|
|
pll->in.pll_icpmset = 4;
|
|
pll->in.pll_icpcset = 4;
|
|
pll->in.pll_icpmset_p = 0;
|
|
pll->in.pll_icpmset_m = 0;
|
|
pll->in.pll_icpcset_p = 0;
|
|
pll->in.pll_icpcset_m = 0;
|
|
pll->in.pll_lpf_res1 = 3;
|
|
pll->in.pll_lpf_cap1 = 11;
|
|
pll->in.pll_lpf_cap2 = 1;
|
|
pll->in.pll_iptat_trim = 7;
|
|
pll->in.pll_c3ctrl = 2;
|
|
pll->in.pll_r3ctrl = 1;
|
|
}
|
|
|
|
#define CEIL(x, y) (((x) + ((y) - 1)) / (y))
|
|
|
|
static void pll_14nm_ssc_calc(struct dsi_pll_14nm *pll)
|
|
{
|
|
u32 period, ssc_period;
|
|
u32 ref, rem;
|
|
u64 step_size;
|
|
|
|
DBG("vco=%lld ref=%lld", pll->vco_current_rate, pll->vco_ref_clk_rate);
|
|
|
|
ssc_period = pll->in.ssc_freq / 500;
|
|
period = (u32)pll->vco_ref_clk_rate / 1000;
|
|
ssc_period = CEIL(period, ssc_period);
|
|
ssc_period -= 1;
|
|
pll->out.ssc_period = ssc_period;
|
|
|
|
DBG("ssc freq=%d spread=%d period=%d", pll->in.ssc_freq,
|
|
pll->in.ssc_spread, pll->out.ssc_period);
|
|
|
|
step_size = (u32)pll->vco_current_rate;
|
|
ref = pll->vco_ref_clk_rate;
|
|
ref /= 1000;
|
|
step_size = div_u64(step_size, ref);
|
|
step_size <<= 20;
|
|
step_size = div_u64(step_size, 1000);
|
|
step_size *= pll->in.ssc_spread;
|
|
step_size = div_u64(step_size, 1000);
|
|
step_size *= (pll->in.ssc_adj_period + 1);
|
|
|
|
rem = 0;
|
|
step_size = div_u64_rem(step_size, ssc_period + 1, &rem);
|
|
if (rem)
|
|
step_size++;
|
|
|
|
DBG("step_size=%lld", step_size);
|
|
|
|
step_size &= 0x0ffff; /* take lower 16 bits */
|
|
|
|
pll->out.ssc_step_size = step_size;
|
|
}
|
|
|
|
static void pll_14nm_dec_frac_calc(struct dsi_pll_14nm *pll)
|
|
{
|
|
struct dsi_pll_input *pin = &pll->in;
|
|
struct dsi_pll_output *pout = &pll->out;
|
|
u64 multiplier = BIT(20);
|
|
u64 dec_start_multiple, dec_start, pll_comp_val;
|
|
u32 duration, div_frac_start;
|
|
u64 vco_clk_rate = pll->vco_current_rate;
|
|
u64 fref = pll->vco_ref_clk_rate;
|
|
|
|
DBG("vco_clk_rate=%lld ref_clk_rate=%lld", vco_clk_rate, fref);
|
|
|
|
dec_start_multiple = div_u64(vco_clk_rate * multiplier, fref);
|
|
div_u64_rem(dec_start_multiple, multiplier, &div_frac_start);
|
|
|
|
dec_start = div_u64(dec_start_multiple, multiplier);
|
|
|
|
pout->dec_start = (u32)dec_start;
|
|
pout->div_frac_start = div_frac_start;
|
|
|
|
if (pin->plllock_cnt == 0)
|
|
duration = 1024;
|
|
else if (pin->plllock_cnt == 1)
|
|
duration = 256;
|
|
else if (pin->plllock_cnt == 2)
|
|
duration = 128;
|
|
else
|
|
duration = 32;
|
|
|
|
pll_comp_val = duration * dec_start_multiple;
|
|
pll_comp_val = div_u64(pll_comp_val, multiplier);
|
|
do_div(pll_comp_val, 10);
|
|
|
|
pout->plllock_cmp = (u32)pll_comp_val;
|
|
|
|
pout->pll_txclk_en = 1;
|
|
pout->cmn_ldo_cntrl = 0x3c;
|
|
}
|
|
|
|
static u32 pll_14nm_kvco_slop(u32 vrate)
|
|
{
|
|
u32 slop = 0;
|
|
|
|
if (vrate > VCO_MIN_RATE && vrate <= 1800000000UL)
|
|
slop = 600;
|
|
else if (vrate > 1800000000UL && vrate < 2300000000UL)
|
|
slop = 400;
|
|
else if (vrate > 2300000000UL && vrate < VCO_MAX_RATE)
|
|
slop = 280;
|
|
|
|
return slop;
|
|
}
|
|
|
|
static void pll_14nm_calc_vco_count(struct dsi_pll_14nm *pll)
|
|
{
|
|
struct dsi_pll_input *pin = &pll->in;
|
|
struct dsi_pll_output *pout = &pll->out;
|
|
u64 vco_clk_rate = pll->vco_current_rate;
|
|
u64 fref = pll->vco_ref_clk_rate;
|
|
u64 data;
|
|
u32 cnt;
|
|
|
|
data = fref * pin->vco_measure_time;
|
|
do_div(data, 1000000);
|
|
data &= 0x03ff; /* 10 bits */
|
|
data -= 2;
|
|
pout->pll_vco_div_ref = data;
|
|
|
|
data = div_u64(vco_clk_rate, 1000000); /* unit is Mhz */
|
|
data *= pin->vco_measure_time;
|
|
do_div(data, 10);
|
|
pout->pll_vco_count = data;
|
|
|
|
data = fref * pin->kvco_measure_time;
|
|
do_div(data, 1000000);
|
|
data &= 0x03ff; /* 10 bits */
|
|
data -= 1;
|
|
pout->pll_kvco_div_ref = data;
|
|
|
|
cnt = pll_14nm_kvco_slop(vco_clk_rate);
|
|
cnt *= 2;
|
|
cnt /= 100;
|
|
cnt *= pin->kvco_measure_time;
|
|
pout->pll_kvco_count = cnt;
|
|
|
|
pout->pll_misc1 = 16;
|
|
pout->pll_resetsm_cntrl = 48;
|
|
pout->pll_resetsm_cntrl2 = pin->bandgap_timer << 3;
|
|
pout->pll_resetsm_cntrl5 = pin->pll_wakeup_timer;
|
|
pout->pll_kvco_code = 0;
|
|
}
|
|
|
|
static void pll_db_commit_ssc(struct dsi_pll_14nm *pll)
|
|
{
|
|
void __iomem *base = pll->mmio;
|
|
struct dsi_pll_input *pin = &pll->in;
|
|
struct dsi_pll_output *pout = &pll->out;
|
|
u8 data;
|
|
|
|
data = pin->ssc_adj_period;
|
|
data &= 0x0ff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER1, data);
|
|
data = (pin->ssc_adj_period >> 8);
|
|
data &= 0x03;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_ADJ_PER2, data);
|
|
|
|
data = pout->ssc_period;
|
|
data &= 0x0ff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER1, data);
|
|
data = (pout->ssc_period >> 8);
|
|
data &= 0x0ff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_PER2, data);
|
|
|
|
data = pout->ssc_step_size;
|
|
data &= 0x0ff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE1, data);
|
|
data = (pout->ssc_step_size >> 8);
|
|
data &= 0x0ff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_STEP_SIZE2, data);
|
|
|
|
data = (pin->ssc_center & 0x01);
|
|
data <<= 1;
|
|
data |= 0x01; /* enable */
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_SSC_EN_CENTER, data);
|
|
|
|
wmb(); /* make sure register committed */
|
|
}
|
|
|
|
static void pll_db_commit_common(struct dsi_pll_14nm *pll,
|
|
struct dsi_pll_input *pin,
|
|
struct dsi_pll_output *pout)
|
|
{
|
|
void __iomem *base = pll->mmio;
|
|
u8 data;
|
|
|
|
/* confgiure the non frequency dependent pll registers */
|
|
data = 0;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_SYSCLK_EN_RESET, data);
|
|
|
|
data = pout->pll_txclk_en;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_TXCLK_EN, data);
|
|
|
|
data = pout->pll_resetsm_cntrl;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL, data);
|
|
data = pout->pll_resetsm_cntrl2;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL2, data);
|
|
data = pout->pll_resetsm_cntrl5;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_RESETSM_CNTRL5, data);
|
|
|
|
data = pout->pll_vco_div_ref & 0xff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF1, data);
|
|
data = (pout->pll_vco_div_ref >> 8) & 0x3;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_DIV_REF2, data);
|
|
|
|
data = pout->pll_kvco_div_ref & 0xff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF1, data);
|
|
data = (pout->pll_kvco_div_ref >> 8) & 0x3;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_DIV_REF2, data);
|
|
|
|
data = pout->pll_misc1;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_MISC1, data);
|
|
|
|
data = pin->pll_ie_trim;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_IE_TRIM, data);
|
|
|
|
data = pin->pll_ip_trim;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_IP_TRIM, data);
|
|
|
|
data = pin->pll_cpmset_cur << 3 | pin->pll_cpcset_cur;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_CP_SET_CUR, data);
|
|
|
|
data = pin->pll_icpcset_p << 3 | pin->pll_icpcset_m;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPCSET, data);
|
|
|
|
data = pin->pll_icpmset_p << 3 | pin->pll_icpcset_m;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICPMSET, data);
|
|
|
|
data = pin->pll_icpmset << 3 | pin->pll_icpcset;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_ICP_SET, data);
|
|
|
|
data = pin->pll_lpf_cap2 << 4 | pin->pll_lpf_cap1;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF1, data);
|
|
|
|
data = pin->pll_iptat_trim;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_IPTAT_TRIM, data);
|
|
|
|
data = pin->pll_c3ctrl | pin->pll_r3ctrl << 4;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_CRCTRL, data);
|
|
}
|
|
|
|
static void pll_14nm_software_reset(struct dsi_pll_14nm *pll_14nm)
|
|
{
|
|
void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
|
|
|
|
/* de assert pll start and apply pll sw reset */
|
|
|
|
/* stop pll */
|
|
pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0);
|
|
|
|
/* pll sw reset */
|
|
pll_write_udelay(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0x20, 10);
|
|
wmb(); /* make sure register committed */
|
|
|
|
pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_1, 0);
|
|
wmb(); /* make sure register committed */
|
|
}
|
|
|
|
static void pll_db_commit_14nm(struct dsi_pll_14nm *pll,
|
|
struct dsi_pll_input *pin,
|
|
struct dsi_pll_output *pout)
|
|
{
|
|
void __iomem *base = pll->mmio;
|
|
void __iomem *cmn_base = pll->phy_cmn_mmio;
|
|
u8 data;
|
|
|
|
DBG("DSI%d PLL", pll->id);
|
|
|
|
data = pout->cmn_ldo_cntrl;
|
|
pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_LDO_CNTRL, data);
|
|
|
|
pll_db_commit_common(pll, pin, pout);
|
|
|
|
pll_14nm_software_reset(pll);
|
|
|
|
data = pin->dsiclk_sel; /* set dsiclk_sel = 1 */
|
|
pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG1, data);
|
|
|
|
data = 0xff; /* data, clk, pll normal operation */
|
|
pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CTRL_0, data);
|
|
|
|
/* configure the frequency dependent pll registers */
|
|
data = pout->dec_start;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_DEC_START, data);
|
|
|
|
data = pout->div_frac_start & 0xff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1, data);
|
|
data = (pout->div_frac_start >> 8) & 0xff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2, data);
|
|
data = (pout->div_frac_start >> 16) & 0xf;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3, data);
|
|
|
|
data = pout->plllock_cmp & 0xff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP1, data);
|
|
|
|
data = (pout->plllock_cmp >> 8) & 0xff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP2, data);
|
|
|
|
data = (pout->plllock_cmp >> 16) & 0x3;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP3, data);
|
|
|
|
data = pin->plllock_cnt << 1 | pin->plllock_rng << 3;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLLLOCK_CMP_EN, data);
|
|
|
|
data = pout->pll_vco_count & 0xff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT1, data);
|
|
data = (pout->pll_vco_count >> 8) & 0xff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_VCO_COUNT2, data);
|
|
|
|
data = pout->pll_kvco_count & 0xff;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT1, data);
|
|
data = (pout->pll_kvco_count >> 8) & 0x3;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_KVCO_COUNT2, data);
|
|
|
|
data = (pout->pll_postdiv - 1) << 4 | pin->pll_lpf_res1;
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_LPF2_POSTDIV, data);
|
|
|
|
if (pin->ssc_en)
|
|
pll_db_commit_ssc(pll);
|
|
|
|
wmb(); /* make sure register committed */
|
|
}
|
|
|
|
/*
|
|
* VCO clock Callbacks
|
|
*/
|
|
static int dsi_pll_14nm_vco_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
|
|
struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
|
|
struct dsi_pll_input *pin = &pll_14nm->in;
|
|
struct dsi_pll_output *pout = &pll_14nm->out;
|
|
|
|
DBG("DSI PLL%d rate=%lu, parent's=%lu", pll_14nm->id, rate,
|
|
parent_rate);
|
|
|
|
pll_14nm->vco_current_rate = rate;
|
|
pll_14nm->vco_ref_clk_rate = VCO_REF_CLK_RATE;
|
|
|
|
dsi_pll_14nm_input_init(pll_14nm);
|
|
|
|
/*
|
|
* This configures the post divider internal to the VCO. It's
|
|
* fixed to divide by 1 for now.
|
|
*
|
|
* tx_band = pll_postdiv.
|
|
* 0: divided by 1
|
|
* 1: divided by 2
|
|
* 2: divided by 4
|
|
* 3: divided by 8
|
|
*/
|
|
pout->pll_postdiv = DSI_PLL_DEFAULT_VCO_POSTDIV;
|
|
|
|
pll_14nm_dec_frac_calc(pll_14nm);
|
|
|
|
if (pin->ssc_en)
|
|
pll_14nm_ssc_calc(pll_14nm);
|
|
|
|
pll_14nm_calc_vco_count(pll_14nm);
|
|
|
|
/* commit the slave DSI PLL registers if we're master. Note that we
|
|
* don't lock the slave PLL. We just ensure that the PLL/PHY registers
|
|
* of the master and slave are identical
|
|
*/
|
|
if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
|
|
struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
|
|
|
|
pll_db_commit_14nm(pll_14nm_slave, pin, pout);
|
|
}
|
|
|
|
pll_db_commit_14nm(pll_14nm, pin, pout);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned long dsi_pll_14nm_vco_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct msm_dsi_pll *pll = hw_clk_to_pll(hw);
|
|
struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
|
|
void __iomem *base = pll_14nm->mmio;
|
|
u64 vco_rate, multiplier = BIT(20);
|
|
u32 div_frac_start;
|
|
u32 dec_start;
|
|
u64 ref_clk = parent_rate;
|
|
|
|
dec_start = pll_read(base + REG_DSI_14nm_PHY_PLL_DEC_START);
|
|
dec_start &= 0x0ff;
|
|
|
|
DBG("dec_start = %x", dec_start);
|
|
|
|
div_frac_start = (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START3)
|
|
& 0xf) << 16;
|
|
div_frac_start |= (pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START2)
|
|
& 0xff) << 8;
|
|
div_frac_start |= pll_read(base + REG_DSI_14nm_PHY_PLL_DIV_FRAC_START1)
|
|
& 0xff;
|
|
|
|
DBG("div_frac_start = %x", div_frac_start);
|
|
|
|
vco_rate = ref_clk * dec_start;
|
|
|
|
vco_rate += ((ref_clk * div_frac_start) / multiplier);
|
|
|
|
/*
|
|
* Recalculating the rate from dec_start and frac_start doesn't end up
|
|
* the rate we originally set. Convert the freq to KHz, round it up and
|
|
* convert it back to MHz.
|
|
*/
|
|
vco_rate = DIV_ROUND_UP_ULL(vco_rate, 1000) * 1000;
|
|
|
|
DBG("returning vco rate = %lu", (unsigned long)vco_rate);
|
|
|
|
return (unsigned long)vco_rate;
|
|
}
|
|
|
|
static const struct clk_ops clk_ops_dsi_pll_14nm_vco = {
|
|
.round_rate = msm_dsi_pll_helper_clk_round_rate,
|
|
.set_rate = dsi_pll_14nm_vco_set_rate,
|
|
.recalc_rate = dsi_pll_14nm_vco_recalc_rate,
|
|
.prepare = msm_dsi_pll_helper_clk_prepare,
|
|
.unprepare = msm_dsi_pll_helper_clk_unprepare,
|
|
};
|
|
|
|
/*
|
|
* N1 and N2 post-divider clock callbacks
|
|
*/
|
|
#define div_mask(width) ((1 << (width)) - 1)
|
|
static unsigned long dsi_pll_14nm_postdiv_recalc_rate(struct clk_hw *hw,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
|
|
struct dsi_pll_14nm *pll_14nm = postdiv->pll;
|
|
void __iomem *base = pll_14nm->phy_cmn_mmio;
|
|
u8 shift = postdiv->shift;
|
|
u8 width = postdiv->width;
|
|
u32 val;
|
|
|
|
DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, parent_rate);
|
|
|
|
val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0) >> shift;
|
|
val &= div_mask(width);
|
|
|
|
return divider_recalc_rate(hw, parent_rate, val, NULL,
|
|
postdiv->flags);
|
|
}
|
|
|
|
static long dsi_pll_14nm_postdiv_round_rate(struct clk_hw *hw,
|
|
unsigned long rate,
|
|
unsigned long *prate)
|
|
{
|
|
struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
|
|
struct dsi_pll_14nm *pll_14nm = postdiv->pll;
|
|
|
|
DBG("DSI%d PLL parent rate=%lu", pll_14nm->id, rate);
|
|
|
|
return divider_round_rate(hw, rate, prate, NULL,
|
|
postdiv->width,
|
|
postdiv->flags);
|
|
}
|
|
|
|
static int dsi_pll_14nm_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
|
|
unsigned long parent_rate)
|
|
{
|
|
struct dsi_pll_14nm_postdiv *postdiv = to_pll_14nm_postdiv(hw);
|
|
struct dsi_pll_14nm *pll_14nm = postdiv->pll;
|
|
void __iomem *base = pll_14nm->phy_cmn_mmio;
|
|
spinlock_t *lock = &pll_14nm->postdiv_lock;
|
|
u8 shift = postdiv->shift;
|
|
u8 width = postdiv->width;
|
|
unsigned int value;
|
|
unsigned long flags = 0;
|
|
u32 val;
|
|
|
|
DBG("DSI%d PLL parent rate=%lu parent rate %lu", pll_14nm->id, rate,
|
|
parent_rate);
|
|
|
|
value = divider_get_val(rate, parent_rate, NULL, postdiv->width,
|
|
postdiv->flags);
|
|
|
|
spin_lock_irqsave(lock, flags);
|
|
|
|
val = pll_read(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
|
|
val &= ~(div_mask(width) << shift);
|
|
|
|
val |= value << shift;
|
|
pll_write(base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val);
|
|
|
|
/* If we're master in dual DSI mode, then the slave PLL's post-dividers
|
|
* follow the master's post dividers
|
|
*/
|
|
if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
|
|
struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
|
|
void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio;
|
|
|
|
pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, val);
|
|
}
|
|
|
|
spin_unlock_irqrestore(lock, flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct clk_ops clk_ops_dsi_pll_14nm_postdiv = {
|
|
.recalc_rate = dsi_pll_14nm_postdiv_recalc_rate,
|
|
.round_rate = dsi_pll_14nm_postdiv_round_rate,
|
|
.set_rate = dsi_pll_14nm_postdiv_set_rate,
|
|
};
|
|
|
|
/*
|
|
* PLL Callbacks
|
|
*/
|
|
|
|
static int dsi_pll_14nm_enable_seq(struct msm_dsi_pll *pll)
|
|
{
|
|
struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
|
|
void __iomem *base = pll_14nm->mmio;
|
|
void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
|
|
bool locked;
|
|
|
|
DBG("");
|
|
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_VREF_CFG1, 0x10);
|
|
pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 1);
|
|
|
|
locked = pll_14nm_poll_for_ready(pll_14nm, POLL_MAX_READS,
|
|
POLL_TIMEOUT_US);
|
|
|
|
if (unlikely(!locked))
|
|
dev_err(&pll_14nm->pdev->dev, "DSI PLL lock failed\n");
|
|
else
|
|
DBG("DSI PLL lock success");
|
|
|
|
return locked ? 0 : -EINVAL;
|
|
}
|
|
|
|
static void dsi_pll_14nm_disable_seq(struct msm_dsi_pll *pll)
|
|
{
|
|
struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
|
|
void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
|
|
|
|
DBG("");
|
|
|
|
pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_PLL_CNTRL, 0);
|
|
}
|
|
|
|
static void dsi_pll_14nm_save_state(struct msm_dsi_pll *pll)
|
|
{
|
|
struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
|
|
struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
|
|
void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
|
|
u32 data;
|
|
|
|
data = pll_read(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0);
|
|
|
|
cached_state->n1postdiv = data & 0xf;
|
|
cached_state->n2postdiv = (data >> 4) & 0xf;
|
|
|
|
DBG("DSI%d PLL save state %x %x", pll_14nm->id,
|
|
cached_state->n1postdiv, cached_state->n2postdiv);
|
|
|
|
cached_state->vco_rate = clk_hw_get_rate(&pll->clk_hw);
|
|
}
|
|
|
|
static int dsi_pll_14nm_restore_state(struct msm_dsi_pll *pll)
|
|
{
|
|
struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
|
|
struct pll_14nm_cached_state *cached_state = &pll_14nm->cached_state;
|
|
void __iomem *cmn_base = pll_14nm->phy_cmn_mmio;
|
|
u32 data;
|
|
int ret;
|
|
|
|
ret = dsi_pll_14nm_vco_set_rate(&pll->clk_hw,
|
|
cached_state->vco_rate, 0);
|
|
if (ret) {
|
|
dev_err(&pll_14nm->pdev->dev,
|
|
"restore vco rate failed. ret=%d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
data = cached_state->n1postdiv | (cached_state->n2postdiv << 4);
|
|
|
|
DBG("DSI%d PLL restore state %x %x", pll_14nm->id,
|
|
cached_state->n1postdiv, cached_state->n2postdiv);
|
|
|
|
pll_write(cmn_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data);
|
|
|
|
/* also restore post-dividers for slave DSI PLL */
|
|
if (pll_14nm->uc == MSM_DSI_PHY_MASTER) {
|
|
struct dsi_pll_14nm *pll_14nm_slave = pll_14nm->slave;
|
|
void __iomem *slave_base = pll_14nm_slave->phy_cmn_mmio;
|
|
|
|
pll_write(slave_base + REG_DSI_14nm_PHY_CMN_CLK_CFG0, data);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsi_pll_14nm_set_usecase(struct msm_dsi_pll *pll,
|
|
enum msm_dsi_phy_usecase uc)
|
|
{
|
|
struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
|
|
void __iomem *base = pll_14nm->mmio;
|
|
u32 clkbuflr_en, bandgap = 0;
|
|
|
|
switch (uc) {
|
|
case MSM_DSI_PHY_STANDALONE:
|
|
clkbuflr_en = 0x1;
|
|
break;
|
|
case MSM_DSI_PHY_MASTER:
|
|
clkbuflr_en = 0x3;
|
|
pll_14nm->slave = pll_14nm_list[(pll_14nm->id + 1) % DSI_MAX];
|
|
break;
|
|
case MSM_DSI_PHY_SLAVE:
|
|
clkbuflr_en = 0x0;
|
|
bandgap = 0x3;
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_CLKBUFLR_EN, clkbuflr_en);
|
|
if (bandgap)
|
|
pll_write(base + REG_DSI_14nm_PHY_PLL_PLL_BANDGAP, bandgap);
|
|
|
|
pll_14nm->uc = uc;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dsi_pll_14nm_get_provider(struct msm_dsi_pll *pll,
|
|
struct clk **byte_clk_provider,
|
|
struct clk **pixel_clk_provider)
|
|
{
|
|
struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
|
|
struct clk_hw_onecell_data *hw_data = pll_14nm->hw_data;
|
|
|
|
if (byte_clk_provider)
|
|
*byte_clk_provider = hw_data->hws[DSI_BYTE_PLL_CLK]->clk;
|
|
if (pixel_clk_provider)
|
|
*pixel_clk_provider = hw_data->hws[DSI_PIXEL_PLL_CLK]->clk;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void dsi_pll_14nm_destroy(struct msm_dsi_pll *pll)
|
|
{
|
|
struct dsi_pll_14nm *pll_14nm = to_pll_14nm(pll);
|
|
struct platform_device *pdev = pll_14nm->pdev;
|
|
int num_hws = pll_14nm->num_hws;
|
|
|
|
of_clk_del_provider(pdev->dev.of_node);
|
|
|
|
while (num_hws--)
|
|
clk_hw_unregister(pll_14nm->hws[num_hws]);
|
|
}
|
|
|
|
static struct clk_hw *pll_14nm_postdiv_register(struct dsi_pll_14nm *pll_14nm,
|
|
const char *name,
|
|
const char *parent_name,
|
|
unsigned long flags,
|
|
u8 shift)
|
|
{
|
|
struct dsi_pll_14nm_postdiv *pll_postdiv;
|
|
struct device *dev = &pll_14nm->pdev->dev;
|
|
struct clk_init_data postdiv_init = {
|
|
.parent_names = (const char *[]) { parent_name },
|
|
.num_parents = 1,
|
|
.name = name,
|
|
.flags = flags,
|
|
.ops = &clk_ops_dsi_pll_14nm_postdiv,
|
|
};
|
|
int ret;
|
|
|
|
pll_postdiv = devm_kzalloc(dev, sizeof(*pll_postdiv), GFP_KERNEL);
|
|
if (!pll_postdiv)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
pll_postdiv->pll = pll_14nm;
|
|
pll_postdiv->shift = shift;
|
|
/* both N1 and N2 postdividers are 4 bits wide */
|
|
pll_postdiv->width = 4;
|
|
/* range of each divider is from 1 to 15 */
|
|
pll_postdiv->flags = CLK_DIVIDER_ONE_BASED;
|
|
pll_postdiv->hw.init = &postdiv_init;
|
|
|
|
ret = clk_hw_register(dev, &pll_postdiv->hw);
|
|
if (ret)
|
|
return ERR_PTR(ret);
|
|
|
|
return &pll_postdiv->hw;
|
|
}
|
|
|
|
static int pll_14nm_register(struct dsi_pll_14nm *pll_14nm)
|
|
{
|
|
char clk_name[32], parent[32], vco_name[32];
|
|
struct clk_init_data vco_init = {
|
|
.parent_names = (const char *[]){ "xo" },
|
|
.num_parents = 1,
|
|
.name = vco_name,
|
|
.flags = CLK_IGNORE_UNUSED,
|
|
.ops = &clk_ops_dsi_pll_14nm_vco,
|
|
};
|
|
struct device *dev = &pll_14nm->pdev->dev;
|
|
struct clk_hw **hws = pll_14nm->hws;
|
|
struct clk_hw_onecell_data *hw_data;
|
|
struct clk_hw *hw;
|
|
int num = 0;
|
|
int ret;
|
|
|
|
DBG("DSI%d", pll_14nm->id);
|
|
|
|
hw_data = devm_kzalloc(dev, sizeof(*hw_data) +
|
|
NUM_PROVIDED_CLKS * sizeof(struct clk_hw *),
|
|
GFP_KERNEL);
|
|
if (!hw_data)
|
|
return -ENOMEM;
|
|
|
|
snprintf(vco_name, 32, "dsi%dvco_clk", pll_14nm->id);
|
|
pll_14nm->base.clk_hw.init = &vco_init;
|
|
|
|
ret = clk_hw_register(dev, &pll_14nm->base.clk_hw);
|
|
if (ret)
|
|
return ret;
|
|
|
|
hws[num++] = &pll_14nm->base.clk_hw;
|
|
|
|
snprintf(clk_name, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
|
|
snprintf(parent, 32, "dsi%dvco_clk", pll_14nm->id);
|
|
|
|
/* N1 postdiv, bits 0-3 in REG_DSI_14nm_PHY_CMN_CLK_CFG0 */
|
|
hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent,
|
|
CLK_SET_RATE_PARENT, 0);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
hws[num++] = hw;
|
|
|
|
snprintf(clk_name, 32, "dsi%dpllbyte", pll_14nm->id);
|
|
snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
|
|
|
|
/* DSI Byte clock = VCO_CLK / N1 / 8 */
|
|
hw = clk_hw_register_fixed_factor(dev, clk_name, parent,
|
|
CLK_SET_RATE_PARENT, 1, 8);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
hws[num++] = hw;
|
|
hw_data->hws[DSI_BYTE_PLL_CLK] = hw;
|
|
|
|
snprintf(clk_name, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id);
|
|
snprintf(parent, 32, "dsi%dn1_postdiv_clk", pll_14nm->id);
|
|
|
|
/*
|
|
* Skip the mux for now, force DSICLK_SEL to 1, Add a /2 divider
|
|
* on the way. Don't let it set parent.
|
|
*/
|
|
hw = clk_hw_register_fixed_factor(dev, clk_name, parent, 0, 1, 2);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
hws[num++] = hw;
|
|
|
|
snprintf(clk_name, 32, "dsi%dpll", pll_14nm->id);
|
|
snprintf(parent, 32, "dsi%dn1_postdivby2_clk", pll_14nm->id);
|
|
|
|
/* DSI pixel clock = VCO_CLK / N1 / 2 / N2
|
|
* This is the output of N2 post-divider, bits 4-7 in
|
|
* REG_DSI_14nm_PHY_CMN_CLK_CFG0. Don't let it set parent.
|
|
*/
|
|
hw = pll_14nm_postdiv_register(pll_14nm, clk_name, parent, 0, 4);
|
|
if (IS_ERR(hw))
|
|
return PTR_ERR(hw);
|
|
|
|
hws[num++] = hw;
|
|
hw_data->hws[DSI_PIXEL_PLL_CLK] = hw;
|
|
|
|
pll_14nm->num_hws = num;
|
|
|
|
hw_data->num = NUM_PROVIDED_CLKS;
|
|
pll_14nm->hw_data = hw_data;
|
|
|
|
ret = of_clk_add_hw_provider(dev->of_node, of_clk_hw_onecell_get,
|
|
pll_14nm->hw_data);
|
|
if (ret) {
|
|
dev_err(dev, "failed to register clk provider: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct msm_dsi_pll *msm_dsi_pll_14nm_init(struct platform_device *pdev, int id)
|
|
{
|
|
struct dsi_pll_14nm *pll_14nm;
|
|
struct msm_dsi_pll *pll;
|
|
int ret;
|
|
|
|
if (!pdev)
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
pll_14nm = devm_kzalloc(&pdev->dev, sizeof(*pll_14nm), GFP_KERNEL);
|
|
if (!pll_14nm)
|
|
return ERR_PTR(-ENOMEM);
|
|
|
|
DBG("PLL%d", id);
|
|
|
|
pll_14nm->pdev = pdev;
|
|
pll_14nm->id = id;
|
|
pll_14nm_list[id] = pll_14nm;
|
|
|
|
pll_14nm->phy_cmn_mmio = msm_ioremap(pdev, "dsi_phy", "DSI_PHY");
|
|
if (IS_ERR_OR_NULL(pll_14nm->phy_cmn_mmio)) {
|
|
dev_err(&pdev->dev, "failed to map CMN PHY base\n");
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
pll_14nm->mmio = msm_ioremap(pdev, "dsi_pll", "DSI_PLL");
|
|
if (IS_ERR_OR_NULL(pll_14nm->mmio)) {
|
|
dev_err(&pdev->dev, "failed to map PLL base\n");
|
|
return ERR_PTR(-ENOMEM);
|
|
}
|
|
|
|
spin_lock_init(&pll_14nm->postdiv_lock);
|
|
|
|
pll = &pll_14nm->base;
|
|
pll->min_rate = VCO_MIN_RATE;
|
|
pll->max_rate = VCO_MAX_RATE;
|
|
pll->get_provider = dsi_pll_14nm_get_provider;
|
|
pll->destroy = dsi_pll_14nm_destroy;
|
|
pll->disable_seq = dsi_pll_14nm_disable_seq;
|
|
pll->save_state = dsi_pll_14nm_save_state;
|
|
pll->restore_state = dsi_pll_14nm_restore_state;
|
|
pll->set_usecase = dsi_pll_14nm_set_usecase;
|
|
|
|
pll_14nm->vco_delay = 1;
|
|
|
|
pll->en_seq_cnt = 1;
|
|
pll->enable_seqs[0] = dsi_pll_14nm_enable_seq;
|
|
|
|
ret = pll_14nm_register(pll_14nm);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to register PLL: %d\n", ret);
|
|
return ERR_PTR(ret);
|
|
}
|
|
|
|
return pll;
|
|
}
|