OpenCloudOS-Kernel/Documentation/ABI
Adam Guerin 2e513f6bc7 crypto: qat - enable dc chaining service
[ Upstream commit 37b14f2dfa791fd485dbc536f8d1ffe8c6990290 ]

QAT GEN4 devices support chained compression operations. These
allow, with a single request to firmware, to hash then compress
data.

Extend the configuration to enable such mode. The cfg_services
operations in sysfs are extended to allow the string "dcc". When
selected, the driver downloads to the device both the symmetric
crypto and the compression firmware images and sends an admin message
to firmware which enables `chained` operations.
In addition, it sets the device's capabilities as the combination
of compression and symmetric crypto capabilities, while excluding
the ICP_ACCEL_CAPABILITIES_CRYPTO_SYMMETRIC bit to indicate
that in this mode, symmetric crypto instances are not supported.

When "dcc" is enabled, the device will handle compression requests
as if the "dc" configuration is loaded ("dcc" is a variation of "dc")
and the driver will register the acomp algorithms.

As for the other extended configurations, "dcc" is only available for
qat_4xxx devices and the chaining service will be only accessible from
user space.

Signed-off-by: Adam Guerin <adam.guerin@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Stable-dep-of: a238487f7965 ("crypto: qat - fix ring to service map for QAT GEN4")
Signed-off-by: Sasha Levin <sashal@kernel.org>
2023-11-20 11:59:23 +01:00
..
obsolete docs: update ocfs2-devel mailing list address 2023-07-08 09:29:29 -07:00
removed docs: update ocfs2-devel mailing list address 2023-07-08 09:29:29 -07:00
stable dmaengine updates for v6.6 2023-09-03 10:49:42 -07:00
testing crypto: qat - enable dc chaining service 2023-11-20 11:59:23 +01:00
README docs: ABI: README: specify that files should be ReST compatible 2020-10-30 13:07:01 +01:00

README

This directory attempts to document the ABI between the Linux kernel and
userspace, and the relative stability of these interfaces.  Due to the
everchanging nature of Linux, and the differing maturity levels, these
interfaces should be used by userspace programs in different ways.

We have four different levels of ABI stability, as shown by the four
different subdirectories in this location.  Interfaces may change levels
of stability according to the rules described below.

The different levels of stability are:

  stable/
	This directory documents the interfaces that the developer has
	defined to be stable.  Userspace programs are free to use these
	interfaces with no restrictions, and backward compatibility for
	them will be guaranteed for at least 2 years.  Most interfaces
	(like syscalls) are expected to never change and always be
	available.

  testing/
	This directory documents interfaces that are felt to be stable,
	as the main development of this interface has been completed.
	The interface can be changed to add new features, but the
	current interface will not break by doing this, unless grave
	errors or security problems are found in them.  Userspace
	programs can start to rely on these interfaces, but they must be
	aware of changes that can occur before these interfaces move to
	be marked stable.  Programs that use these interfaces are
	strongly encouraged to add their name to the description of
	these interfaces, so that the kernel developers can easily
	notify them if any changes occur (see the description of the
	layout of the files below for details on how to do this.)

  obsolete/
	This directory documents interfaces that are still remaining in
	the kernel, but are marked to be removed at some later point in
	time.  The description of the interface will document the reason
	why it is obsolete and when it can be expected to be removed.

  removed/
	This directory contains a list of the old interfaces that have
	been removed from the kernel.

Every file in these directories will contain the following information:

What:		Short description of the interface
Date:		Date created
KernelVersion:	Kernel version this feature first showed up in.
Contact:	Primary contact for this interface (may be a mailing list)
Description:	Long description of the interface and how to use it.
Users:		All users of this interface who wish to be notified when
		it changes.  This is very important for interfaces in
		the "testing" stage, so that kernel developers can work
		with userspace developers to ensure that things do not
		break in ways that are unacceptable.  It is also
		important to get feedback for these interfaces to make
		sure they are working in a proper way and do not need to
		be changed further.


Note:
   The fields should be use a simple notation, compatible with ReST markup.
   Also, the file **should not** have a top-level index, like::

	===
	foo
	===

How things move between levels:

Interfaces in stable may move to obsolete, as long as the proper
notification is given.

Interfaces may be removed from obsolete and the kernel as long as the
documented amount of time has gone by.

Interfaces in the testing state can move to the stable state when the
developers feel they are finished.  They cannot be removed from the
kernel tree without going through the obsolete state first.

It's up to the developer to place their interfaces in the category they
wish for it to start out in.


Notable bits of non-ABI, which should not under any circumstances be considered
stable:

- Kconfig.  Userspace should not rely on the presence or absence of any
  particular Kconfig symbol, in /proc/config.gz, in the copy of .config
  commonly installed to /boot, or in any invocation of the kernel build
  process.

- Kernel-internal symbols.  Do not rely on the presence, absence, location, or
  type of any kernel symbol, either in System.map files or the kernel binary
  itself.  See Documentation/process/stable-api-nonsense.rst.