1024 lines
30 KiB
C
1024 lines
30 KiB
C
/*
|
|
* HD audio interface patch for Conexant HDA audio codec
|
|
*
|
|
* Copyright (c) 2006 Pototskiy Akex <alex.pototskiy@gmail.com>
|
|
* Takashi Iwai <tiwai@suse.de>
|
|
* Tobin Davis <tdavis@dsl-only.net>
|
|
*
|
|
* This driver is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This driver is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/module.h>
|
|
#include <sound/core.h>
|
|
#include <sound/jack.h>
|
|
|
|
#include "hda_codec.h"
|
|
#include "hda_local.h"
|
|
#include "hda_auto_parser.h"
|
|
#include "hda_beep.h"
|
|
#include "hda_jack.h"
|
|
#include "hda_generic.h"
|
|
|
|
struct conexant_spec {
|
|
struct hda_gen_spec gen;
|
|
|
|
unsigned int beep_amp;
|
|
|
|
/* extra EAPD pins */
|
|
unsigned int num_eapds;
|
|
hda_nid_t eapds[4];
|
|
bool dynamic_eapd;
|
|
hda_nid_t mute_led_eapd;
|
|
|
|
unsigned int parse_flags; /* flag for snd_hda_parse_pin_defcfg() */
|
|
|
|
/* OPLC XO specific */
|
|
bool recording;
|
|
bool dc_enable;
|
|
unsigned int dc_input_bias; /* offset into olpc_xo_dc_bias */
|
|
struct nid_path *dc_mode_path;
|
|
};
|
|
|
|
|
|
#ifdef CONFIG_SND_HDA_INPUT_BEEP
|
|
static inline void set_beep_amp(struct conexant_spec *spec, hda_nid_t nid,
|
|
int idx, int dir)
|
|
{
|
|
spec->gen.beep_nid = nid;
|
|
spec->beep_amp = HDA_COMPOSE_AMP_VAL(nid, 1, idx, dir);
|
|
}
|
|
/* additional beep mixers; the actual parameters are overwritten at build */
|
|
static const struct snd_kcontrol_new cxt_beep_mixer[] = {
|
|
HDA_CODEC_VOLUME_MONO("Beep Playback Volume", 0, 1, 0, HDA_OUTPUT),
|
|
HDA_CODEC_MUTE_BEEP_MONO("Beep Playback Switch", 0, 1, 0, HDA_OUTPUT),
|
|
{ } /* end */
|
|
};
|
|
|
|
/* create beep controls if needed */
|
|
static int add_beep_ctls(struct hda_codec *codec)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
int err;
|
|
|
|
if (spec->beep_amp) {
|
|
const struct snd_kcontrol_new *knew;
|
|
for (knew = cxt_beep_mixer; knew->name; knew++) {
|
|
struct snd_kcontrol *kctl;
|
|
kctl = snd_ctl_new1(knew, codec);
|
|
if (!kctl)
|
|
return -ENOMEM;
|
|
kctl->private_value = spec->beep_amp;
|
|
err = snd_hda_ctl_add(codec, 0, kctl);
|
|
if (err < 0)
|
|
return err;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
#else
|
|
#define set_beep_amp(spec, nid, idx, dir) /* NOP */
|
|
#define add_beep_ctls(codec) 0
|
|
#endif
|
|
|
|
/*
|
|
* Automatic parser for CX20641 & co
|
|
*/
|
|
|
|
#ifdef CONFIG_SND_HDA_INPUT_BEEP
|
|
static void cx_auto_parse_beep(struct hda_codec *codec)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
hda_nid_t nid;
|
|
|
|
for_each_hda_codec_node(nid, codec)
|
|
if (get_wcaps_type(get_wcaps(codec, nid)) == AC_WID_BEEP) {
|
|
set_beep_amp(spec, nid, 0, HDA_OUTPUT);
|
|
break;
|
|
}
|
|
}
|
|
#else
|
|
#define cx_auto_parse_beep(codec)
|
|
#endif
|
|
|
|
/* parse EAPDs */
|
|
static void cx_auto_parse_eapd(struct hda_codec *codec)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
hda_nid_t nid;
|
|
|
|
for_each_hda_codec_node(nid, codec) {
|
|
if (get_wcaps_type(get_wcaps(codec, nid)) != AC_WID_PIN)
|
|
continue;
|
|
if (!(snd_hda_query_pin_caps(codec, nid) & AC_PINCAP_EAPD))
|
|
continue;
|
|
spec->eapds[spec->num_eapds++] = nid;
|
|
if (spec->num_eapds >= ARRAY_SIZE(spec->eapds))
|
|
break;
|
|
}
|
|
|
|
/* NOTE: below is a wild guess; if we have more than two EAPDs,
|
|
* it's a new chip, where EAPDs are supposed to be associated to
|
|
* pins, and we can control EAPD per pin.
|
|
* OTOH, if only one or two EAPDs are found, it's an old chip,
|
|
* thus it might control over all pins.
|
|
*/
|
|
if (spec->num_eapds > 2)
|
|
spec->dynamic_eapd = 1;
|
|
}
|
|
|
|
static void cx_auto_turn_eapd(struct hda_codec *codec, int num_pins,
|
|
hda_nid_t *pins, bool on)
|
|
{
|
|
int i;
|
|
for (i = 0; i < num_pins; i++) {
|
|
if (snd_hda_query_pin_caps(codec, pins[i]) & AC_PINCAP_EAPD)
|
|
snd_hda_codec_write(codec, pins[i], 0,
|
|
AC_VERB_SET_EAPD_BTLENABLE,
|
|
on ? 0x02 : 0);
|
|
}
|
|
}
|
|
|
|
/* turn on/off EAPD according to Master switch */
|
|
static void cx_auto_vmaster_hook(void *private_data, int enabled)
|
|
{
|
|
struct hda_codec *codec = private_data;
|
|
struct conexant_spec *spec = codec->spec;
|
|
|
|
cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, enabled);
|
|
}
|
|
|
|
/* turn on/off EAPD according to Master switch (inversely!) for mute LED */
|
|
static void cx_auto_vmaster_hook_mute_led(void *private_data, int enabled)
|
|
{
|
|
struct hda_codec *codec = private_data;
|
|
struct conexant_spec *spec = codec->spec;
|
|
|
|
snd_hda_codec_write(codec, spec->mute_led_eapd, 0,
|
|
AC_VERB_SET_EAPD_BTLENABLE,
|
|
enabled ? 0x00 : 0x02);
|
|
}
|
|
|
|
static int cx_auto_build_controls(struct hda_codec *codec)
|
|
{
|
|
int err;
|
|
|
|
err = snd_hda_gen_build_controls(codec);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
err = add_beep_ctls(codec);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cx_auto_init(struct hda_codec *codec)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
snd_hda_gen_init(codec);
|
|
if (!spec->dynamic_eapd)
|
|
cx_auto_turn_eapd(codec, spec->num_eapds, spec->eapds, true);
|
|
|
|
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_INIT);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#define cx_auto_free snd_hda_gen_free
|
|
|
|
static const struct hda_codec_ops cx_auto_patch_ops = {
|
|
.build_controls = cx_auto_build_controls,
|
|
.build_pcms = snd_hda_gen_build_pcms,
|
|
.init = cx_auto_init,
|
|
.free = cx_auto_free,
|
|
.unsol_event = snd_hda_jack_unsol_event,
|
|
#ifdef CONFIG_PM
|
|
.check_power_status = snd_hda_gen_check_power_status,
|
|
#endif
|
|
};
|
|
|
|
/*
|
|
* pin fix-up
|
|
*/
|
|
enum {
|
|
CXT_PINCFG_LENOVO_X200,
|
|
CXT_PINCFG_LENOVO_TP410,
|
|
CXT_PINCFG_LEMOTE_A1004,
|
|
CXT_PINCFG_LEMOTE_A1205,
|
|
CXT_PINCFG_COMPAQ_CQ60,
|
|
CXT_FIXUP_STEREO_DMIC,
|
|
CXT_FIXUP_INC_MIC_BOOST,
|
|
CXT_FIXUP_HEADPHONE_MIC_PIN,
|
|
CXT_FIXUP_HEADPHONE_MIC,
|
|
CXT_FIXUP_GPIO1,
|
|
CXT_FIXUP_ASPIRE_DMIC,
|
|
CXT_FIXUP_THINKPAD_ACPI,
|
|
CXT_FIXUP_OLPC_XO,
|
|
CXT_FIXUP_CAP_MIX_AMP,
|
|
CXT_FIXUP_TOSHIBA_P105,
|
|
CXT_FIXUP_HP_530,
|
|
CXT_FIXUP_CAP_MIX_AMP_5047,
|
|
CXT_FIXUP_MUTE_LED_EAPD,
|
|
};
|
|
|
|
/* for hda_fixup_thinkpad_acpi() */
|
|
#include "thinkpad_helper.c"
|
|
|
|
static void cxt_fixup_stereo_dmic(struct hda_codec *codec,
|
|
const struct hda_fixup *fix, int action)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
spec->gen.inv_dmic_split = 1;
|
|
}
|
|
|
|
static void cxt5066_increase_mic_boost(struct hda_codec *codec,
|
|
const struct hda_fixup *fix, int action)
|
|
{
|
|
if (action != HDA_FIXUP_ACT_PRE_PROBE)
|
|
return;
|
|
|
|
snd_hda_override_amp_caps(codec, 0x17, HDA_OUTPUT,
|
|
(0x3 << AC_AMPCAP_OFFSET_SHIFT) |
|
|
(0x4 << AC_AMPCAP_NUM_STEPS_SHIFT) |
|
|
(0x27 << AC_AMPCAP_STEP_SIZE_SHIFT) |
|
|
(0 << AC_AMPCAP_MUTE_SHIFT));
|
|
}
|
|
|
|
static void cxt_update_headset_mode(struct hda_codec *codec)
|
|
{
|
|
/* The verbs used in this function were tested on a Conexant CX20751/2 codec. */
|
|
int i;
|
|
bool mic_mode = false;
|
|
struct conexant_spec *spec = codec->spec;
|
|
struct auto_pin_cfg *cfg = &spec->gen.autocfg;
|
|
|
|
hda_nid_t mux_pin = spec->gen.imux_pins[spec->gen.cur_mux[0]];
|
|
|
|
for (i = 0; i < cfg->num_inputs; i++)
|
|
if (cfg->inputs[i].pin == mux_pin) {
|
|
mic_mode = !!cfg->inputs[i].is_headphone_mic;
|
|
break;
|
|
}
|
|
|
|
if (mic_mode) {
|
|
snd_hda_codec_write_cache(codec, 0x1c, 0, 0x410, 0x7c); /* enable merged mode for analog int-mic */
|
|
spec->gen.hp_jack_present = false;
|
|
} else {
|
|
snd_hda_codec_write_cache(codec, 0x1c, 0, 0x410, 0x54); /* disable merged mode for analog int-mic */
|
|
spec->gen.hp_jack_present = snd_hda_jack_detect(codec, spec->gen.autocfg.hp_pins[0]);
|
|
}
|
|
|
|
snd_hda_gen_update_outputs(codec);
|
|
}
|
|
|
|
static void cxt_update_headset_mode_hook(struct hda_codec *codec,
|
|
struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
cxt_update_headset_mode(codec);
|
|
}
|
|
|
|
static void cxt_fixup_headphone_mic(struct hda_codec *codec,
|
|
const struct hda_fixup *fix, int action)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
|
|
switch (action) {
|
|
case HDA_FIXUP_ACT_PRE_PROBE:
|
|
spec->parse_flags |= HDA_PINCFG_HEADPHONE_MIC;
|
|
break;
|
|
case HDA_FIXUP_ACT_PROBE:
|
|
spec->gen.cap_sync_hook = cxt_update_headset_mode_hook;
|
|
spec->gen.automute_hook = cxt_update_headset_mode;
|
|
break;
|
|
case HDA_FIXUP_ACT_INIT:
|
|
cxt_update_headset_mode(codec);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* OPLC XO 1.5 fixup */
|
|
|
|
/* OLPC XO-1.5 supports DC input mode (e.g. for use with analog sensors)
|
|
* through the microphone jack.
|
|
* When the user enables this through a mixer switch, both internal and
|
|
* external microphones are disabled. Gain is fixed at 0dB. In this mode,
|
|
* we also allow the bias to be configured through a separate mixer
|
|
* control. */
|
|
|
|
#define update_mic_pin(codec, nid, val) \
|
|
snd_hda_codec_update_cache(codec, nid, 0, \
|
|
AC_VERB_SET_PIN_WIDGET_CONTROL, val)
|
|
|
|
static const struct hda_input_mux olpc_xo_dc_bias = {
|
|
.num_items = 3,
|
|
.items = {
|
|
{ "Off", PIN_IN },
|
|
{ "50%", PIN_VREF50 },
|
|
{ "80%", PIN_VREF80 },
|
|
},
|
|
};
|
|
|
|
static void olpc_xo_update_mic_boost(struct hda_codec *codec)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
int ch, val;
|
|
|
|
for (ch = 0; ch < 2; ch++) {
|
|
val = AC_AMP_SET_OUTPUT |
|
|
(ch ? AC_AMP_SET_RIGHT : AC_AMP_SET_LEFT);
|
|
if (!spec->dc_enable)
|
|
val |= snd_hda_codec_amp_read(codec, 0x17, ch, HDA_OUTPUT, 0);
|
|
snd_hda_codec_write(codec, 0x17, 0,
|
|
AC_VERB_SET_AMP_GAIN_MUTE, val);
|
|
}
|
|
}
|
|
|
|
static void olpc_xo_update_mic_pins(struct hda_codec *codec)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
int cur_input, val;
|
|
struct nid_path *path;
|
|
|
|
cur_input = spec->gen.input_paths[0][spec->gen.cur_mux[0]];
|
|
|
|
/* Set up mic pins for port-B, C and F dynamically as the recording
|
|
* LED is turned on/off by these pin controls
|
|
*/
|
|
if (!spec->dc_enable) {
|
|
/* disable DC bias path and pin for port F */
|
|
update_mic_pin(codec, 0x1e, 0);
|
|
snd_hda_activate_path(codec, spec->dc_mode_path, false, false);
|
|
|
|
/* update port B (ext mic) and C (int mic) */
|
|
/* OLPC defers mic widget control until when capture is
|
|
* started because the microphone LED comes on as soon as
|
|
* these settings are put in place. if we did this before
|
|
* recording, it would give the false indication that
|
|
* recording is happening when it is not.
|
|
*/
|
|
update_mic_pin(codec, 0x1a, spec->recording ?
|
|
snd_hda_codec_get_pin_target(codec, 0x1a) : 0);
|
|
update_mic_pin(codec, 0x1b, spec->recording ?
|
|
snd_hda_codec_get_pin_target(codec, 0x1b) : 0);
|
|
/* enable normal mic path */
|
|
path = snd_hda_get_path_from_idx(codec, cur_input);
|
|
if (path)
|
|
snd_hda_activate_path(codec, path, true, false);
|
|
} else {
|
|
/* disable normal mic path */
|
|
path = snd_hda_get_path_from_idx(codec, cur_input);
|
|
if (path)
|
|
snd_hda_activate_path(codec, path, false, false);
|
|
|
|
/* Even though port F is the DC input, the bias is controlled
|
|
* on port B. We also leave that port as an active input (but
|
|
* unselected) in DC mode just in case that is necessary to
|
|
* make the bias setting take effect.
|
|
*/
|
|
if (spec->recording)
|
|
val = olpc_xo_dc_bias.items[spec->dc_input_bias].index;
|
|
else
|
|
val = 0;
|
|
update_mic_pin(codec, 0x1a, val);
|
|
update_mic_pin(codec, 0x1b, 0);
|
|
/* enable DC bias path and pin */
|
|
update_mic_pin(codec, 0x1e, spec->recording ? PIN_IN : 0);
|
|
snd_hda_activate_path(codec, spec->dc_mode_path, true, false);
|
|
}
|
|
}
|
|
|
|
/* mic_autoswitch hook */
|
|
static void olpc_xo_automic(struct hda_codec *codec,
|
|
struct hda_jack_callback *jack)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
int saved_cached_write = codec->cached_write;
|
|
|
|
codec->cached_write = 1;
|
|
/* in DC mode, we don't handle automic */
|
|
if (!spec->dc_enable)
|
|
snd_hda_gen_mic_autoswitch(codec, jack);
|
|
olpc_xo_update_mic_pins(codec);
|
|
snd_hda_codec_flush_cache(codec);
|
|
codec->cached_write = saved_cached_write;
|
|
if (spec->dc_enable)
|
|
olpc_xo_update_mic_boost(codec);
|
|
}
|
|
|
|
/* pcm_capture hook */
|
|
static void olpc_xo_capture_hook(struct hda_pcm_stream *hinfo,
|
|
struct hda_codec *codec,
|
|
struct snd_pcm_substream *substream,
|
|
int action)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
|
|
/* toggle spec->recording flag and update mic pins accordingly
|
|
* for turning on/off LED
|
|
*/
|
|
switch (action) {
|
|
case HDA_GEN_PCM_ACT_PREPARE:
|
|
spec->recording = 1;
|
|
olpc_xo_update_mic_pins(codec);
|
|
break;
|
|
case HDA_GEN_PCM_ACT_CLEANUP:
|
|
spec->recording = 0;
|
|
olpc_xo_update_mic_pins(codec);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int olpc_xo_dc_mode_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct conexant_spec *spec = codec->spec;
|
|
ucontrol->value.integer.value[0] = spec->dc_enable;
|
|
return 0;
|
|
}
|
|
|
|
static int olpc_xo_dc_mode_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct conexant_spec *spec = codec->spec;
|
|
int dc_enable = !!ucontrol->value.integer.value[0];
|
|
|
|
if (dc_enable == spec->dc_enable)
|
|
return 0;
|
|
|
|
spec->dc_enable = dc_enable;
|
|
olpc_xo_update_mic_pins(codec);
|
|
olpc_xo_update_mic_boost(codec);
|
|
return 1;
|
|
}
|
|
|
|
static int olpc_xo_dc_bias_enum_get(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct conexant_spec *spec = codec->spec;
|
|
ucontrol->value.enumerated.item[0] = spec->dc_input_bias;
|
|
return 0;
|
|
}
|
|
|
|
static int olpc_xo_dc_bias_enum_info(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_info *uinfo)
|
|
{
|
|
return snd_hda_input_mux_info(&olpc_xo_dc_bias, uinfo);
|
|
}
|
|
|
|
static int olpc_xo_dc_bias_enum_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct conexant_spec *spec = codec->spec;
|
|
const struct hda_input_mux *imux = &olpc_xo_dc_bias;
|
|
unsigned int idx;
|
|
|
|
idx = ucontrol->value.enumerated.item[0];
|
|
if (idx >= imux->num_items)
|
|
idx = imux->num_items - 1;
|
|
if (spec->dc_input_bias == idx)
|
|
return 0;
|
|
|
|
spec->dc_input_bias = idx;
|
|
if (spec->dc_enable)
|
|
olpc_xo_update_mic_pins(codec);
|
|
return 1;
|
|
}
|
|
|
|
static const struct snd_kcontrol_new olpc_xo_mixers[] = {
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "DC Mode Enable Switch",
|
|
.info = snd_ctl_boolean_mono_info,
|
|
.get = olpc_xo_dc_mode_get,
|
|
.put = olpc_xo_dc_mode_put,
|
|
},
|
|
{
|
|
.iface = SNDRV_CTL_ELEM_IFACE_MIXER,
|
|
.name = "DC Input Bias Enum",
|
|
.info = olpc_xo_dc_bias_enum_info,
|
|
.get = olpc_xo_dc_bias_enum_get,
|
|
.put = olpc_xo_dc_bias_enum_put,
|
|
},
|
|
{}
|
|
};
|
|
|
|
/* overriding mic boost put callback; update mic boost volume only when
|
|
* DC mode is disabled
|
|
*/
|
|
static int olpc_xo_mic_boost_put(struct snd_kcontrol *kcontrol,
|
|
struct snd_ctl_elem_value *ucontrol)
|
|
{
|
|
struct hda_codec *codec = snd_kcontrol_chip(kcontrol);
|
|
struct conexant_spec *spec = codec->spec;
|
|
int ret = snd_hda_mixer_amp_volume_put(kcontrol, ucontrol);
|
|
if (ret > 0 && spec->dc_enable)
|
|
olpc_xo_update_mic_boost(codec);
|
|
return ret;
|
|
}
|
|
|
|
static void cxt_fixup_olpc_xo(struct hda_codec *codec,
|
|
const struct hda_fixup *fix, int action)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
int i;
|
|
|
|
if (action != HDA_FIXUP_ACT_PROBE)
|
|
return;
|
|
|
|
spec->gen.mic_autoswitch_hook = olpc_xo_automic;
|
|
spec->gen.pcm_capture_hook = olpc_xo_capture_hook;
|
|
spec->dc_mode_path = snd_hda_add_new_path(codec, 0x1e, 0x14, 0);
|
|
|
|
snd_hda_add_new_ctls(codec, olpc_xo_mixers);
|
|
|
|
/* OLPC's microphone port is DC coupled for use with external sensors,
|
|
* therefore we use a 50% mic bias in order to center the input signal
|
|
* with the DC input range of the codec.
|
|
*/
|
|
snd_hda_codec_set_pin_target(codec, 0x1a, PIN_VREF50);
|
|
|
|
/* override mic boost control */
|
|
for (i = 0; i < spec->gen.kctls.used; i++) {
|
|
struct snd_kcontrol_new *kctl =
|
|
snd_array_elem(&spec->gen.kctls, i);
|
|
if (!strcmp(kctl->name, "Mic Boost Volume")) {
|
|
kctl->put = olpc_xo_mic_boost_put;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void cxt_fixup_mute_led_eapd(struct hda_codec *codec,
|
|
const struct hda_fixup *fix, int action)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
|
|
if (action == HDA_FIXUP_ACT_PRE_PROBE) {
|
|
spec->mute_led_eapd = 0x1b;
|
|
spec->dynamic_eapd = 1;
|
|
spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook_mute_led;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Fix max input level on mixer widget to 0dB
|
|
* (originally it has 0x2b steps with 0dB offset 0x14)
|
|
*/
|
|
static void cxt_fixup_cap_mix_amp(struct hda_codec *codec,
|
|
const struct hda_fixup *fix, int action)
|
|
{
|
|
snd_hda_override_amp_caps(codec, 0x17, HDA_INPUT,
|
|
(0x14 << AC_AMPCAP_OFFSET_SHIFT) |
|
|
(0x14 << AC_AMPCAP_NUM_STEPS_SHIFT) |
|
|
(0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
|
|
(1 << AC_AMPCAP_MUTE_SHIFT));
|
|
}
|
|
|
|
/*
|
|
* Fix max input level on mixer widget to 0dB
|
|
* (originally it has 0x1e steps with 0 dB offset 0x17)
|
|
*/
|
|
static void cxt_fixup_cap_mix_amp_5047(struct hda_codec *codec,
|
|
const struct hda_fixup *fix, int action)
|
|
{
|
|
snd_hda_override_amp_caps(codec, 0x10, HDA_INPUT,
|
|
(0x17 << AC_AMPCAP_OFFSET_SHIFT) |
|
|
(0x17 << AC_AMPCAP_NUM_STEPS_SHIFT) |
|
|
(0x05 << AC_AMPCAP_STEP_SIZE_SHIFT) |
|
|
(1 << AC_AMPCAP_MUTE_SHIFT));
|
|
}
|
|
|
|
/* ThinkPad X200 & co with cxt5051 */
|
|
static const struct hda_pintbl cxt_pincfg_lenovo_x200[] = {
|
|
{ 0x16, 0x042140ff }, /* HP (seq# overridden) */
|
|
{ 0x17, 0x21a11000 }, /* dock-mic */
|
|
{ 0x19, 0x2121103f }, /* dock-HP */
|
|
{ 0x1c, 0x21440100 }, /* dock SPDIF out */
|
|
{}
|
|
};
|
|
|
|
/* ThinkPad 410/420/510/520, X201 & co with cxt5066 */
|
|
static const struct hda_pintbl cxt_pincfg_lenovo_tp410[] = {
|
|
{ 0x19, 0x042110ff }, /* HP (seq# overridden) */
|
|
{ 0x1a, 0x21a190f0 }, /* dock-mic */
|
|
{ 0x1c, 0x212140ff }, /* dock-HP */
|
|
{}
|
|
};
|
|
|
|
/* Lemote A1004/A1205 with cxt5066 */
|
|
static const struct hda_pintbl cxt_pincfg_lemote[] = {
|
|
{ 0x1a, 0x90a10020 }, /* Internal mic */
|
|
{ 0x1b, 0x03a11020 }, /* External mic */
|
|
{ 0x1d, 0x400101f0 }, /* Not used */
|
|
{ 0x1e, 0x40a701f0 }, /* Not used */
|
|
{ 0x20, 0x404501f0 }, /* Not used */
|
|
{ 0x22, 0x404401f0 }, /* Not used */
|
|
{ 0x23, 0x40a701f0 }, /* Not used */
|
|
{}
|
|
};
|
|
|
|
static const struct hda_fixup cxt_fixups[] = {
|
|
[CXT_PINCFG_LENOVO_X200] = {
|
|
.type = HDA_FIXUP_PINS,
|
|
.v.pins = cxt_pincfg_lenovo_x200,
|
|
},
|
|
[CXT_PINCFG_LENOVO_TP410] = {
|
|
.type = HDA_FIXUP_PINS,
|
|
.v.pins = cxt_pincfg_lenovo_tp410,
|
|
.chained = true,
|
|
.chain_id = CXT_FIXUP_THINKPAD_ACPI,
|
|
},
|
|
[CXT_PINCFG_LEMOTE_A1004] = {
|
|
.type = HDA_FIXUP_PINS,
|
|
.chained = true,
|
|
.chain_id = CXT_FIXUP_INC_MIC_BOOST,
|
|
.v.pins = cxt_pincfg_lemote,
|
|
},
|
|
[CXT_PINCFG_LEMOTE_A1205] = {
|
|
.type = HDA_FIXUP_PINS,
|
|
.v.pins = cxt_pincfg_lemote,
|
|
},
|
|
[CXT_PINCFG_COMPAQ_CQ60] = {
|
|
.type = HDA_FIXUP_PINS,
|
|
.v.pins = (const struct hda_pintbl[]) {
|
|
/* 0x17 was falsely set up as a mic, it should 0x1d */
|
|
{ 0x17, 0x400001f0 },
|
|
{ 0x1d, 0x97a70120 },
|
|
{ }
|
|
}
|
|
},
|
|
[CXT_FIXUP_STEREO_DMIC] = {
|
|
.type = HDA_FIXUP_FUNC,
|
|
.v.func = cxt_fixup_stereo_dmic,
|
|
},
|
|
[CXT_FIXUP_INC_MIC_BOOST] = {
|
|
.type = HDA_FIXUP_FUNC,
|
|
.v.func = cxt5066_increase_mic_boost,
|
|
},
|
|
[CXT_FIXUP_HEADPHONE_MIC_PIN] = {
|
|
.type = HDA_FIXUP_PINS,
|
|
.chained = true,
|
|
.chain_id = CXT_FIXUP_HEADPHONE_MIC,
|
|
.v.pins = (const struct hda_pintbl[]) {
|
|
{ 0x18, 0x03a1913d }, /* use as headphone mic, without its own jack detect */
|
|
{ }
|
|
}
|
|
},
|
|
[CXT_FIXUP_HEADPHONE_MIC] = {
|
|
.type = HDA_FIXUP_FUNC,
|
|
.v.func = cxt_fixup_headphone_mic,
|
|
},
|
|
[CXT_FIXUP_GPIO1] = {
|
|
.type = HDA_FIXUP_VERBS,
|
|
.v.verbs = (const struct hda_verb[]) {
|
|
{ 0x01, AC_VERB_SET_GPIO_MASK, 0x01 },
|
|
{ 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x01 },
|
|
{ 0x01, AC_VERB_SET_GPIO_DATA, 0x01 },
|
|
{ }
|
|
},
|
|
},
|
|
[CXT_FIXUP_ASPIRE_DMIC] = {
|
|
.type = HDA_FIXUP_FUNC,
|
|
.v.func = cxt_fixup_stereo_dmic,
|
|
.chained = true,
|
|
.chain_id = CXT_FIXUP_GPIO1,
|
|
},
|
|
[CXT_FIXUP_THINKPAD_ACPI] = {
|
|
.type = HDA_FIXUP_FUNC,
|
|
.v.func = hda_fixup_thinkpad_acpi,
|
|
},
|
|
[CXT_FIXUP_OLPC_XO] = {
|
|
.type = HDA_FIXUP_FUNC,
|
|
.v.func = cxt_fixup_olpc_xo,
|
|
},
|
|
[CXT_FIXUP_CAP_MIX_AMP] = {
|
|
.type = HDA_FIXUP_FUNC,
|
|
.v.func = cxt_fixup_cap_mix_amp,
|
|
},
|
|
[CXT_FIXUP_TOSHIBA_P105] = {
|
|
.type = HDA_FIXUP_PINS,
|
|
.v.pins = (const struct hda_pintbl[]) {
|
|
{ 0x10, 0x961701f0 }, /* speaker/hp */
|
|
{ 0x12, 0x02a1901e }, /* ext mic */
|
|
{ 0x14, 0x95a70110 }, /* int mic */
|
|
{}
|
|
},
|
|
},
|
|
[CXT_FIXUP_HP_530] = {
|
|
.type = HDA_FIXUP_PINS,
|
|
.v.pins = (const struct hda_pintbl[]) {
|
|
{ 0x12, 0x90a60160 }, /* int mic */
|
|
{}
|
|
},
|
|
.chained = true,
|
|
.chain_id = CXT_FIXUP_CAP_MIX_AMP,
|
|
},
|
|
[CXT_FIXUP_CAP_MIX_AMP_5047] = {
|
|
.type = HDA_FIXUP_FUNC,
|
|
.v.func = cxt_fixup_cap_mix_amp_5047,
|
|
},
|
|
[CXT_FIXUP_MUTE_LED_EAPD] = {
|
|
.type = HDA_FIXUP_FUNC,
|
|
.v.func = cxt_fixup_mute_led_eapd,
|
|
},
|
|
};
|
|
|
|
static const struct snd_pci_quirk cxt5045_fixups[] = {
|
|
SND_PCI_QUIRK(0x103c, 0x30d5, "HP 530", CXT_FIXUP_HP_530),
|
|
SND_PCI_QUIRK(0x1179, 0xff31, "Toshiba P105", CXT_FIXUP_TOSHIBA_P105),
|
|
/* HP, Packard Bell, Fujitsu-Siemens & Lenovo laptops have
|
|
* really bad sound over 0dB on NID 0x17.
|
|
*/
|
|
SND_PCI_QUIRK_VENDOR(0x103c, "HP", CXT_FIXUP_CAP_MIX_AMP),
|
|
SND_PCI_QUIRK_VENDOR(0x1631, "Packard Bell", CXT_FIXUP_CAP_MIX_AMP),
|
|
SND_PCI_QUIRK_VENDOR(0x1734, "Fujitsu", CXT_FIXUP_CAP_MIX_AMP),
|
|
SND_PCI_QUIRK_VENDOR(0x17aa, "Lenovo", CXT_FIXUP_CAP_MIX_AMP),
|
|
{}
|
|
};
|
|
|
|
static const struct hda_model_fixup cxt5045_fixup_models[] = {
|
|
{ .id = CXT_FIXUP_CAP_MIX_AMP, .name = "cap-mix-amp" },
|
|
{ .id = CXT_FIXUP_TOSHIBA_P105, .name = "toshiba-p105" },
|
|
{ .id = CXT_FIXUP_HP_530, .name = "hp-530" },
|
|
{}
|
|
};
|
|
|
|
static const struct snd_pci_quirk cxt5047_fixups[] = {
|
|
/* HP laptops have really bad sound over 0 dB on NID 0x10.
|
|
*/
|
|
SND_PCI_QUIRK_VENDOR(0x103c, "HP", CXT_FIXUP_CAP_MIX_AMP_5047),
|
|
{}
|
|
};
|
|
|
|
static const struct hda_model_fixup cxt5047_fixup_models[] = {
|
|
{ .id = CXT_FIXUP_CAP_MIX_AMP_5047, .name = "cap-mix-amp" },
|
|
{}
|
|
};
|
|
|
|
static const struct snd_pci_quirk cxt5051_fixups[] = {
|
|
SND_PCI_QUIRK(0x103c, 0x360b, "Compaq CQ60", CXT_PINCFG_COMPAQ_CQ60),
|
|
SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo X200", CXT_PINCFG_LENOVO_X200),
|
|
{}
|
|
};
|
|
|
|
static const struct hda_model_fixup cxt5051_fixup_models[] = {
|
|
{ .id = CXT_PINCFG_LENOVO_X200, .name = "lenovo-x200" },
|
|
{}
|
|
};
|
|
|
|
static const struct snd_pci_quirk cxt5066_fixups[] = {
|
|
SND_PCI_QUIRK(0x1025, 0x0543, "Acer Aspire One 522", CXT_FIXUP_STEREO_DMIC),
|
|
SND_PCI_QUIRK(0x1025, 0x054c, "Acer Aspire 3830TG", CXT_FIXUP_ASPIRE_DMIC),
|
|
SND_PCI_QUIRK(0x1025, 0x054f, "Acer Aspire 4830T", CXT_FIXUP_ASPIRE_DMIC),
|
|
SND_PCI_QUIRK(0x1043, 0x138d, "Asus", CXT_FIXUP_HEADPHONE_MIC_PIN),
|
|
SND_PCI_QUIRK(0x152d, 0x0833, "OLPC XO-1.5", CXT_FIXUP_OLPC_XO),
|
|
SND_PCI_QUIRK(0x17aa, 0x20f2, "Lenovo T400", CXT_PINCFG_LENOVO_TP410),
|
|
SND_PCI_QUIRK(0x17aa, 0x215e, "Lenovo T410", CXT_PINCFG_LENOVO_TP410),
|
|
SND_PCI_QUIRK(0x17aa, 0x215f, "Lenovo T510", CXT_PINCFG_LENOVO_TP410),
|
|
SND_PCI_QUIRK(0x17aa, 0x21ce, "Lenovo T420", CXT_PINCFG_LENOVO_TP410),
|
|
SND_PCI_QUIRK(0x17aa, 0x21cf, "Lenovo T520", CXT_PINCFG_LENOVO_TP410),
|
|
SND_PCI_QUIRK(0x17aa, 0x21da, "Lenovo X220", CXT_PINCFG_LENOVO_TP410),
|
|
SND_PCI_QUIRK(0x17aa, 0x21db, "Lenovo X220-tablet", CXT_PINCFG_LENOVO_TP410),
|
|
SND_PCI_QUIRK(0x17aa, 0x38af, "Lenovo IdeaPad Z560", CXT_FIXUP_MUTE_LED_EAPD),
|
|
SND_PCI_QUIRK(0x17aa, 0x3975, "Lenovo U300s", CXT_FIXUP_STEREO_DMIC),
|
|
SND_PCI_QUIRK(0x17aa, 0x3977, "Lenovo IdeaPad U310", CXT_FIXUP_STEREO_DMIC),
|
|
SND_PCI_QUIRK(0x17aa, 0x397b, "Lenovo S205", CXT_FIXUP_STEREO_DMIC),
|
|
SND_PCI_QUIRK_VENDOR(0x17aa, "Thinkpad", CXT_FIXUP_THINKPAD_ACPI),
|
|
SND_PCI_QUIRK(0x1c06, 0x2011, "Lemote A1004", CXT_PINCFG_LEMOTE_A1004),
|
|
SND_PCI_QUIRK(0x1c06, 0x2012, "Lemote A1205", CXT_PINCFG_LEMOTE_A1205),
|
|
{}
|
|
};
|
|
|
|
static const struct hda_model_fixup cxt5066_fixup_models[] = {
|
|
{ .id = CXT_FIXUP_STEREO_DMIC, .name = "stereo-dmic" },
|
|
{ .id = CXT_FIXUP_GPIO1, .name = "gpio1" },
|
|
{ .id = CXT_FIXUP_HEADPHONE_MIC_PIN, .name = "headphone-mic-pin" },
|
|
{ .id = CXT_PINCFG_LENOVO_TP410, .name = "tp410" },
|
|
{ .id = CXT_FIXUP_THINKPAD_ACPI, .name = "thinkpad" },
|
|
{ .id = CXT_PINCFG_LEMOTE_A1004, .name = "lemote-a1004" },
|
|
{ .id = CXT_PINCFG_LEMOTE_A1205, .name = "lemote-a1205" },
|
|
{ .id = CXT_FIXUP_OLPC_XO, .name = "olpc-xo" },
|
|
{ .id = CXT_FIXUP_MUTE_LED_EAPD, .name = "mute-led-eapd" },
|
|
{}
|
|
};
|
|
|
|
/* add "fake" mute amp-caps to DACs on cx5051 so that mixer mute switches
|
|
* can be created (bko#42825)
|
|
*/
|
|
static void add_cx5051_fake_mutes(struct hda_codec *codec)
|
|
{
|
|
struct conexant_spec *spec = codec->spec;
|
|
static hda_nid_t out_nids[] = {
|
|
0x10, 0x11, 0
|
|
};
|
|
hda_nid_t *p;
|
|
|
|
for (p = out_nids; *p; p++)
|
|
snd_hda_override_amp_caps(codec, *p, HDA_OUTPUT,
|
|
AC_AMPCAP_MIN_MUTE |
|
|
query_amp_caps(codec, *p, HDA_OUTPUT));
|
|
spec->gen.dac_min_mute = true;
|
|
}
|
|
|
|
static int patch_conexant_auto(struct hda_codec *codec)
|
|
{
|
|
struct conexant_spec *spec;
|
|
int err;
|
|
|
|
codec_info(codec, "%s: BIOS auto-probing.\n", codec->core.chip_name);
|
|
|
|
spec = kzalloc(sizeof(*spec), GFP_KERNEL);
|
|
if (!spec)
|
|
return -ENOMEM;
|
|
snd_hda_gen_spec_init(&spec->gen);
|
|
codec->spec = spec;
|
|
|
|
cx_auto_parse_beep(codec);
|
|
cx_auto_parse_eapd(codec);
|
|
spec->gen.own_eapd_ctl = 1;
|
|
if (spec->dynamic_eapd)
|
|
spec->gen.vmaster_mute.hook = cx_auto_vmaster_hook;
|
|
|
|
switch (codec->core.vendor_id) {
|
|
case 0x14f15045:
|
|
codec->single_adc_amp = 1;
|
|
spec->gen.mixer_nid = 0x17;
|
|
spec->gen.add_stereo_mix_input = HDA_HINT_STEREO_MIX_AUTO;
|
|
snd_hda_pick_fixup(codec, cxt5045_fixup_models,
|
|
cxt5045_fixups, cxt_fixups);
|
|
break;
|
|
case 0x14f15047:
|
|
codec->pin_amp_workaround = 1;
|
|
spec->gen.mixer_nid = 0x19;
|
|
spec->gen.add_stereo_mix_input = HDA_HINT_STEREO_MIX_AUTO;
|
|
snd_hda_pick_fixup(codec, cxt5047_fixup_models,
|
|
cxt5047_fixups, cxt_fixups);
|
|
break;
|
|
case 0x14f15051:
|
|
add_cx5051_fake_mutes(codec);
|
|
codec->pin_amp_workaround = 1;
|
|
snd_hda_pick_fixup(codec, cxt5051_fixup_models,
|
|
cxt5051_fixups, cxt_fixups);
|
|
break;
|
|
default:
|
|
codec->pin_amp_workaround = 1;
|
|
snd_hda_pick_fixup(codec, cxt5066_fixup_models,
|
|
cxt5066_fixups, cxt_fixups);
|
|
break;
|
|
}
|
|
|
|
/* Show mute-led control only on HP laptops
|
|
* This is a sort of white-list: on HP laptops, EAPD corresponds
|
|
* only to the mute-LED without actualy amp function. Meanwhile,
|
|
* others may use EAPD really as an amp switch, so it might be
|
|
* not good to expose it blindly.
|
|
*/
|
|
switch (codec->core.subsystem_id >> 16) {
|
|
case 0x103c:
|
|
spec->gen.vmaster_mute_enum = 1;
|
|
break;
|
|
}
|
|
|
|
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PRE_PROBE);
|
|
|
|
err = snd_hda_parse_pin_defcfg(codec, &spec->gen.autocfg, NULL,
|
|
spec->parse_flags);
|
|
if (err < 0)
|
|
goto error;
|
|
|
|
err = snd_hda_gen_parse_auto_config(codec, &spec->gen.autocfg);
|
|
if (err < 0)
|
|
goto error;
|
|
|
|
codec->patch_ops = cx_auto_patch_ops;
|
|
|
|
/* Some laptops with Conexant chips show stalls in S3 resume,
|
|
* which falls into the single-cmd mode.
|
|
* Better to make reset, then.
|
|
*/
|
|
if (!codec->bus->core.sync_write) {
|
|
codec_info(codec,
|
|
"Enable sync_write for stable communication\n");
|
|
codec->bus->core.sync_write = 1;
|
|
codec->bus->allow_bus_reset = 1;
|
|
}
|
|
|
|
snd_hda_apply_fixup(codec, HDA_FIXUP_ACT_PROBE);
|
|
|
|
return 0;
|
|
|
|
error:
|
|
cx_auto_free(codec);
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
*/
|
|
|
|
static const struct hda_codec_preset snd_hda_preset_conexant[] = {
|
|
{ .id = 0x14f15045, .name = "CX20549 (Venice)",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15047, .name = "CX20551 (Waikiki)",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15051, .name = "CX20561 (Hermosa)",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15066, .name = "CX20582 (Pebble)",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15067, .name = "CX20583 (Pebble HSF)",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15068, .name = "CX20584",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15069, .name = "CX20585",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f1506c, .name = "CX20588",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f1506e, .name = "CX20590",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15097, .name = "CX20631",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15098, .name = "CX20632",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f150a1, .name = "CX20641",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f150a2, .name = "CX20642",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f150ab, .name = "CX20651",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f150ac, .name = "CX20652",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f150b8, .name = "CX20664",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f150b9, .name = "CX20665",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f1510f, .name = "CX20751/2",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15110, .name = "CX20751/2",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15111, .name = "CX20753/4",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15113, .name = "CX20755",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15114, .name = "CX20756",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f15115, .name = "CX20757",
|
|
.patch = patch_conexant_auto },
|
|
{ .id = 0x14f151d7, .name = "CX20952",
|
|
.patch = patch_conexant_auto },
|
|
{} /* terminator */
|
|
};
|
|
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15045");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15047");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15051");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15066");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15067");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15068");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15069");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f1506c");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f1506e");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15097");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15098");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f150a1");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f150a2");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f150ab");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f150ac");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f150b8");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f150b9");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f1510f");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15110");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15111");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15113");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15114");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f15115");
|
|
MODULE_ALIAS("snd-hda-codec-id:14f151d7");
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("Conexant HD-audio codec");
|
|
|
|
static struct hda_codec_driver conexant_driver = {
|
|
.preset = snd_hda_preset_conexant,
|
|
};
|
|
|
|
module_hda_codec_driver(conexant_driver);
|