OpenCloudOS-Kernel/drivers/usb
Douglas Anderson 40eed7d783 usb: dwc2: rockchip: Make the max_transfer_size automatic
Previously we needed to set the max_transfer_size to explicitly be 65535
because the old driver would detect that our hardware could support much
bigger transfers and then would try to do them.  This wouldn't work
since the DMA alignment code couldn't support it.

Later in commit e8f8c14d9d ("usb: dwc2: clip max_transfer_size to
65535") upstream added support for clipping this automatically.  Since
that commit it has been OK to just use "-1" (default), but nobody
bothered to change it.

Let's change it to default now for two reasons:
- It's nice to use autodetected params.
- If we can remove the 65535 limit, we can transfer more!

Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: John Youn <johnyoun@synopsys.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Felipe Balbi <balbi@kernel.org>
2016-03-04 15:14:39 +02:00
..
atm USB: cxacru: fix an bounds check warning 2016-02-03 13:52:10 -08:00
c67x00 c67x00-hcd: use USB_DT_HUB 2015-04-03 19:03:16 +02:00
chipidea usb: chipidea: otg: add A idle to B disconnect timer 2016-03-04 15:14:38 +02:00
class usb: usbtmc: Fix disconnect/poll interaction 2016-02-20 20:21:53 -08:00
common usb: common: otg-fsm: add HNP polling support 2016-03-04 15:14:36 +02:00
core Merge 4.5-rc6 into usb-next 2016-03-01 16:13:54 -08:00
dwc2 usb: dwc2: rockchip: Make the max_transfer_size automatic 2016-03-04 15:14:39 +02:00
dwc3 usb: dwc3: Validate the maximum_speed parameter 2016-03-04 15:14:38 +02:00
early
gadget usb: gadget: composite: handle otg status selector request from OTG host 2016-03-04 15:14:36 +02:00
host usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol 2016-03-04 15:14:29 +02:00
image scsi: Do not set cmd_per_lun to 1 in the host template 2015-05-31 18:06:28 -07:00
isp1760 usb: isp1760: udc: add ep capabilities support 2015-08-04 12:26:55 -05:00
misc usb/misc/chaoskey: introduce an URB for asynchronous reads 2016-02-20 20:12:21 -08:00
mon usb: core: rename mutex usb_bus_list_lock to usb_bus_idr_lock 2016-02-06 21:55:57 -08:00
musb usb: musb: sunxi: support module autoloading 2016-03-04 15:14:38 +02:00
phy usb: phy: phy-am335x: remove include of regulator/consumer.h 2016-03-04 15:14:31 +02:00
renesas_usbhs usb: renesas_usbhs: Don't check CSSTS bit if peripheral mode 2016-03-04 15:14:28 +02:00
serial USB: option: add "4G LTE usb-modem U901" 2016-02-18 13:08:03 +01:00
storage usb: storage: use usb_store_dbg instead of US_DEBUGPX 2016-02-20 20:21:53 -08:00
usbip usb: usbip: Fix possible deadlocks reported by lockdep 2016-02-03 13:52:10 -08:00
wusbcore USB: core, wusbcore: use bus_to_hcd 2016-01-24 21:00:33 -08:00
Kconfig usb: isp1760: Move driver from drivers/usb/host/ to drivers/usb/isp1760/ 2015-01-27 09:39:38 -06:00
Makefile usb: fsl: drop USB_FSL_MPH_DR_OF Kconfig symbol 2016-03-04 15:14:29 +02:00
README usb: hub: rename khubd to hub_wq in documentation and comments 2014-09-23 22:33:19 -07:00
usb-skeleton.c

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("hub_wq").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.