66 lines
1.9 KiB
Plaintext
66 lines
1.9 KiB
Plaintext
* AT91's Analog to Digital Converter (ADC)
|
|
|
|
Required properties:
|
|
- compatible: Should be "atmel,at91sam9260-adc"
|
|
- reg: Should contain ADC registers location and length
|
|
- interrupts: Should contain the IRQ line for the ADC
|
|
- atmel,adc-channel-base: Offset of the first channel data register
|
|
- atmel,adc-channels-used: Bitmask of the channels muxed and enable for this
|
|
device
|
|
- atmel,adc-drdy-mask: Mask of the DRDY interruption in the ADC
|
|
- atmel,adc-num-channels: Number of channels available in the ADC
|
|
- atmel,adc-startup-time: Startup Time of the ADC in microseconds as
|
|
defined in the datasheet
|
|
- atmel,adc-status-register: Offset of the Interrupt Status Register
|
|
- atmel,adc-trigger-register: Offset of the Trigger Register
|
|
- atmel,adc-vref: Reference voltage in millivolts for the conversions
|
|
|
|
Optional properties:
|
|
- atmel,adc-use-external: Boolean to enable of external triggers
|
|
|
|
Optional trigger Nodes:
|
|
- Required properties:
|
|
* trigger-name: Name of the trigger exposed to the user
|
|
* trigger-value: Value to put in the Trigger register
|
|
to activate this trigger
|
|
- Optional properties:
|
|
* trigger-external: Is the trigger an external trigger?
|
|
|
|
Examples:
|
|
adc0: adc@fffb0000 {
|
|
compatible = "atmel,at91sam9260-adc";
|
|
reg = <0xfffb0000 0x100>;
|
|
interrupts = <20 4>;
|
|
atmel,adc-channel-base = <0x30>;
|
|
atmel,adc-channels-used = <0xff>;
|
|
atmel,adc-drdy-mask = <0x10000>;
|
|
atmel,adc-num-channels = <8>;
|
|
atmel,adc-startup-time = <40>;
|
|
atmel,adc-status-register = <0x1c>;
|
|
atmel,adc-trigger-register = <0x08>;
|
|
atmel,adc-use-external;
|
|
atmel,adc-vref = <3300>;
|
|
|
|
trigger@0 {
|
|
trigger-name = "external-rising";
|
|
trigger-value = <0x1>;
|
|
trigger-external;
|
|
};
|
|
trigger@1 {
|
|
trigger-name = "external-falling";
|
|
trigger-value = <0x2>;
|
|
trigger-external;
|
|
};
|
|
|
|
trigger@2 {
|
|
trigger-name = "external-any";
|
|
trigger-value = <0x3>;
|
|
trigger-external;
|
|
};
|
|
|
|
trigger@3 {
|
|
trigger-name = "continuous";
|
|
trigger-value = <0x6>;
|
|
};
|
|
};
|