OpenCloudOS-Kernel/Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml

205 lines
6.4 KiB
YAML

# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
%YAML 1.2
---
$id: http://devicetree.org/schemas/mfd/rohm,bd71828-pmic.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
title: ROHM BD71828 Power Management Integrated Circuit bindings
maintainers:
- Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
description: |
BD71828GW is a single-chip power management IC for battery-powered portable
devices. The IC integrates 7 buck converters, 7 LDOs, and a 1500 mA
single-cell linear charger. Also included is a Coulomb counter, a real-time
clock (RTC), and a 32.768 kHz clock gate.
properties:
compatible:
const: rohm,bd71828
reg:
description:
I2C slave address.
maxItems: 1
interrupts:
maxItems: 1
gpio-controller: true
"#gpio-cells":
const: 2
description: |
The first cell is the pin number and the second cell is used to specify
flags. See ../gpio/gpio.txt for more information.
clocks:
maxItems: 1
"#clock-cells":
const: 0
clock-output-names:
const: bd71828-32k-out
rohm,clkout-open-drain:
description: clk32kout mode. Set to 1 for "open-drain" or 0 for "cmos".
$ref: "/schemas/types.yaml#/definitions/uint32"
minimum: 0
maximum: 1
rohm,charger-sense-resistor-ohms:
minimum: 10000000
maximum: 50000000
description: |
BD71827 and BD71828 have SAR ADC for measuring charging currents.
External sense resistor (RSENSE in data sheet) should be used. If some
other but 30MOhm resistor is used the resistance value should be given
here in Ohms.
regulators:
$ref: ../regulator/rohm,bd71828-regulator.yaml
description:
List of child nodes that specify the regulators.
leds:
$ref: ../leds/rohm,bd71828-leds.yaml
gpio-reserved-ranges:
description: |
Usage of BD71828 GPIO pins can be changed via OTP. This property can be
used to mark the pins which should not be configured for GPIO. Please see
the ../gpio/gpio.txt for more information.
required:
- compatible
- reg
- interrupts
- clocks
- "#clock-cells"
- regulators
- gpio-controller
- "#gpio-cells"
additionalProperties: false
examples:
- |
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/leds/common.h>
i2c {
#address-cells = <1>;
#size-cells = <0>;
pmic: pmic@4b {
compatible = "rohm,bd71828";
reg = <0x4b>;
interrupt-parent = <&gpio1>;
interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
clocks = <&osc 0>;
#clock-cells = <0>;
clock-output-names = "bd71828-32k-out";
gpio-controller;
#gpio-cells = <2>;
gpio-reserved-ranges = <0 1>, <2 1>;
rohm,charger-sense-resistor-ohms = <10000000>;
regulators {
buck1: BUCK1 {
regulator-name = "buck1";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <2500>;
};
buck2: BUCK2 {
regulator-name = "buck2";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <2500>;
};
buck3: BUCK3 {
regulator-name = "buck3";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <2000000>;
};
buck4: BUCK4 {
regulator-name = "buck4";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1800000>;
};
buck5: BUCK5 {
regulator-name = "buck5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <3300000>;
};
buck6: BUCK6 {
regulator-name = "buck6";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <2500>;
};
buck7: BUCK7 {
regulator-name = "buck7";
regulator-min-microvolt = <500000>;
regulator-max-microvolt = <2000000>;
regulator-ramp-delay = <2500>;
};
ldo1: LDO1 {
regulator-name = "ldo1";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo2: LDO2 {
regulator-name = "ldo2";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo3: LDO3 {
regulator-name = "ldo3";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo4: LDO4 {
regulator-name = "ldo4";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo5: LDO5 {
regulator-name = "ldo5";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
ldo6: LDO6 {
regulator-name = "ldo6";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
ldo7_reg: LDO7 {
regulator-name = "ldo7";
regulator-min-microvolt = <800000>;
regulator-max-microvolt = <3300000>;
};
};
leds {
compatible = "rohm,bd71828-leds";
led-1 {
rohm,led-compatible = "bd71828-grnled";
function = LED_FUNCTION_INDICATOR;
color = <LED_COLOR_ID_GREEN>;
};
led-2 {
rohm,led-compatible = "bd71828-ambled";
function = LED_FUNCTION_CHARGING;
color = <LED_COLOR_ID_AMBER>;
};
};
};
};