OpenCloudOS-Kernel/drivers/gpu/drm/meson/meson_plane.c

399 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Copyright (C) 2016 BayLibre, SAS
* Author: Neil Armstrong <narmstrong@baylibre.com>
* Copyright (C) 2015 Amlogic, Inc. All rights reserved.
* Copyright (C) 2014 Endless Mobile
*
* Written by:
* Jasper St. Pierre <jstpierre@mecheye.net>
*/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/mutex.h>
#include <linux/bitfield.h>
#include <linux/platform_device.h>
#include <drm/drmP.h>
#include <drm/drm_atomic.h>
#include <drm/drm_atomic_helper.h>
#include <drm/drm_plane_helper.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_fb_cma_helper.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_rect.h>
#include "meson_plane.h"
#include "meson_vpp.h"
#include "meson_viu.h"
#include "meson_registers.h"
/* OSD_SCI_WH_M1 */
#define SCI_WH_M1_W(w) FIELD_PREP(GENMASK(28, 16), w)
#define SCI_WH_M1_H(h) FIELD_PREP(GENMASK(12, 0), h)
/* OSD_SCO_H_START_END */
/* OSD_SCO_V_START_END */
#define SCO_HV_START(start) FIELD_PREP(GENMASK(27, 16), start)
#define SCO_HV_END(end) FIELD_PREP(GENMASK(11, 0), end)
/* OSD_SC_CTRL0 */
#define SC_CTRL0_PATH_EN BIT(3)
#define SC_CTRL0_SEL_OSD1 BIT(2)
/* OSD_VSC_CTRL0 */
#define VSC_BANK_LEN(value) FIELD_PREP(GENMASK(2, 0), value)
#define VSC_TOP_INI_RCV_NUM(value) FIELD_PREP(GENMASK(6, 3), value)
#define VSC_TOP_RPT_L0_NUM(value) FIELD_PREP(GENMASK(9, 8), value)
#define VSC_BOT_INI_RCV_NUM(value) FIELD_PREP(GENMASK(14, 11), value)
#define VSC_BOT_RPT_L0_NUM(value) FIELD_PREP(GENMASK(17, 16), value)
#define VSC_PROG_INTERLACE BIT(23)
#define VSC_VERTICAL_SCALER_EN BIT(24)
/* OSD_VSC_INI_PHASE */
#define VSC_INI_PHASE_BOT(bottom) FIELD_PREP(GENMASK(31, 16), bottom)
#define VSC_INI_PHASE_TOP(top) FIELD_PREP(GENMASK(15, 0), top)
/* OSD_HSC_CTRL0 */
#define HSC_BANK_LENGTH(value) FIELD_PREP(GENMASK(2, 0), value)
#define HSC_INI_RCV_NUM0(value) FIELD_PREP(GENMASK(6, 3), value)
#define HSC_RPT_P0_NUM0(value) FIELD_PREP(GENMASK(9, 8), value)
#define HSC_HORIZ_SCALER_EN BIT(22)
/* VPP_OSD_VSC_PHASE_STEP */
/* VPP_OSD_HSC_PHASE_STEP */
#define SC_PHASE_STEP(value) FIELD_PREP(GENMASK(27, 0), value)
struct meson_plane {
struct drm_plane base;
struct meson_drm *priv;
bool enabled;
};
#define to_meson_plane(x) container_of(x, struct meson_plane, base)
#define FRAC_16_16(mult, div) (((mult) << 16) / (div))
static int meson_plane_atomic_check(struct drm_plane *plane,
struct drm_plane_state *state)
{
struct drm_crtc_state *crtc_state;
if (!state->crtc)
return 0;
crtc_state = drm_atomic_get_crtc_state(state->state, state->crtc);
if (IS_ERR(crtc_state))
return PTR_ERR(crtc_state);
/*
* Only allow :
* - Upscaling up to 5x, vertical and horizontal
* - Final coordinates must match crtc size
*/
return drm_atomic_helper_check_plane_state(state, crtc_state,
FRAC_16_16(1, 5),
DRM_PLANE_HELPER_NO_SCALING,
false, true);
}
/* Takes a fixed 16.16 number and converts it to integer. */
static inline int64_t fixed16_to_int(int64_t value)
{
return value >> 16;
}
static void meson_plane_atomic_update(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct meson_plane *meson_plane = to_meson_plane(plane);
struct drm_plane_state *state = plane->state;
struct drm_rect dest = drm_plane_state_dest(state);
struct meson_drm *priv = meson_plane->priv;
struct drm_framebuffer *fb = state->fb;
struct drm_gem_cma_object *gem;
unsigned long flags;
int vsc_ini_rcv_num, vsc_ini_rpt_p0_num;
int vsc_bot_rcv_num, vsc_bot_rpt_p0_num;
int hsc_ini_rcv_num, hsc_ini_rpt_p0_num;
int hf_phase_step, vf_phase_step;
int src_w, src_h, dst_w, dst_h;
int bot_ini_phase;
int hf_bank_len;
int vf_bank_len;
u8 canvas_id_osd1;
/*
* Update Coordinates
* Update Formats
* Update Buffer
* Enable Plane
*/
spin_lock_irqsave(&priv->drm->event_lock, flags);
/* Enable OSD and BLK0, set max global alpha */
priv->viu.osd1_ctrl_stat = OSD_ENABLE |
(0xFF << OSD_GLOBAL_ALPHA_SHIFT) |
OSD_BLK0_ENABLE;
canvas_id_osd1 = priv->canvas_id_osd1;
/* Set up BLK0 to point to the right canvas */
priv->viu.osd1_blk0_cfg[0] = ((canvas_id_osd1 << OSD_CANVAS_SEL) |
OSD_ENDIANNESS_LE);
/* On GXBB, Use the old non-HDR RGB2YUV converter */
if (meson_vpu_is_compatible(priv, "amlogic,meson-gxbb-vpu"))
priv->viu.osd1_blk0_cfg[0] |= OSD_OUTPUT_COLOR_RGB;
switch (fb->format->format) {
case DRM_FORMAT_XRGB8888:
/* For XRGB, replace the pixel's alpha by 0xFF */
writel_bits_relaxed(OSD_REPLACE_EN, OSD_REPLACE_EN,
priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
OSD_COLOR_MATRIX_32_ARGB;
break;
case DRM_FORMAT_XBGR8888:
/* For XRGB, replace the pixel's alpha by 0xFF */
writel_bits_relaxed(OSD_REPLACE_EN, OSD_REPLACE_EN,
priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
OSD_COLOR_MATRIX_32_ABGR;
break;
case DRM_FORMAT_ARGB8888:
/* For ARGB, use the pixel's alpha */
writel_bits_relaxed(OSD_REPLACE_EN, 0,
priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
OSD_COLOR_MATRIX_32_ARGB;
break;
case DRM_FORMAT_ABGR8888:
/* For ARGB, use the pixel's alpha */
writel_bits_relaxed(OSD_REPLACE_EN, 0,
priv->io_base + _REG(VIU_OSD1_CTRL_STAT2));
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_32 |
OSD_COLOR_MATRIX_32_ABGR;
break;
case DRM_FORMAT_RGB888:
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_24 |
OSD_COLOR_MATRIX_24_RGB;
break;
case DRM_FORMAT_RGB565:
priv->viu.osd1_blk0_cfg[0] |= OSD_BLK_MODE_16 |
OSD_COLOR_MATRIX_16_RGB565;
break;
};
/* Default scaler parameters */
vsc_bot_rcv_num = 0;
vsc_bot_rpt_p0_num = 0;
hf_bank_len = 4;
vf_bank_len = 4;
if (state->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) {
vsc_bot_rcv_num = 6;
vsc_bot_rpt_p0_num = 2;
}
hsc_ini_rcv_num = hf_bank_len;
vsc_ini_rcv_num = vf_bank_len;
hsc_ini_rpt_p0_num = (hf_bank_len / 2) - 1;
vsc_ini_rpt_p0_num = (vf_bank_len / 2) - 1;
src_w = fixed16_to_int(state->src_w);
src_h = fixed16_to_int(state->src_h);
dst_w = state->crtc_w;
dst_h = state->crtc_h;
/*
* When the output is interlaced, the OSD must switch between
* each field using the INTERLACE_SEL_ODD (0) of VIU_OSD1_BLK0_CFG_W0
* at each vsync.
* But the vertical scaler can provide such funtionnality if
* is configured for 2:1 scaling with interlace options enabled.
*/
if (state->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE) {
dest.y1 /= 2;
dest.y2 /= 2;
dst_h /= 2;
}
hf_phase_step = ((src_w << 18) / dst_w) << 6;
vf_phase_step = (src_h << 20) / dst_h;
if (state->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE)
bot_ini_phase = ((vf_phase_step / 2) >> 4);
else
bot_ini_phase = 0;
vf_phase_step = (vf_phase_step << 4);
/* In interlaced mode, scaler is always active */
if (src_h != dst_h || src_w != dst_w) {
priv->viu.osd_sc_i_wh_m1 = SCI_WH_M1_W(src_w - 1) |
SCI_WH_M1_H(src_h - 1);
priv->viu.osd_sc_o_h_start_end = SCO_HV_START(dest.x1) |
SCO_HV_END(dest.x2 - 1);
priv->viu.osd_sc_o_v_start_end = SCO_HV_START(dest.y1) |
SCO_HV_END(dest.y2 - 1);
/* Enable OSD Scaler */
priv->viu.osd_sc_ctrl0 = SC_CTRL0_PATH_EN | SC_CTRL0_SEL_OSD1;
} else {
priv->viu.osd_sc_i_wh_m1 = 0;
priv->viu.osd_sc_o_h_start_end = 0;
priv->viu.osd_sc_o_v_start_end = 0;
priv->viu.osd_sc_ctrl0 = 0;
}
/* In interlaced mode, vertical scaler is always active */
if (src_h != dst_h) {
priv->viu.osd_sc_v_ctrl0 =
VSC_BANK_LEN(vf_bank_len) |
VSC_TOP_INI_RCV_NUM(vsc_ini_rcv_num) |
VSC_TOP_RPT_L0_NUM(vsc_ini_rpt_p0_num) |
VSC_VERTICAL_SCALER_EN;
if (state->crtc->mode.flags & DRM_MODE_FLAG_INTERLACE)
priv->viu.osd_sc_v_ctrl0 |=
VSC_BOT_INI_RCV_NUM(vsc_bot_rcv_num) |
VSC_BOT_RPT_L0_NUM(vsc_bot_rpt_p0_num) |
VSC_PROG_INTERLACE;
priv->viu.osd_sc_v_phase_step = SC_PHASE_STEP(vf_phase_step);
priv->viu.osd_sc_v_ini_phase = VSC_INI_PHASE_BOT(bot_ini_phase);
} else {
priv->viu.osd_sc_v_ctrl0 = 0;
priv->viu.osd_sc_v_phase_step = 0;
priv->viu.osd_sc_v_ini_phase = 0;
}
/* Horizontal scaler is only used if width does not match */
if (src_w != dst_w) {
priv->viu.osd_sc_h_ctrl0 =
HSC_BANK_LENGTH(hf_bank_len) |
HSC_INI_RCV_NUM0(hsc_ini_rcv_num) |
HSC_RPT_P0_NUM0(hsc_ini_rpt_p0_num) |
HSC_HORIZ_SCALER_EN;
priv->viu.osd_sc_h_phase_step = SC_PHASE_STEP(hf_phase_step);
priv->viu.osd_sc_h_ini_phase = 0;
} else {
priv->viu.osd_sc_h_ctrl0 = 0;
priv->viu.osd_sc_h_phase_step = 0;
priv->viu.osd_sc_h_ini_phase = 0;
}
/*
* The format of these registers is (x2 << 16 | x1),
* where x2 is exclusive.
* e.g. +30x1920 would be (1919 << 16) | 30
*/
priv->viu.osd1_blk0_cfg[1] =
((fixed16_to_int(state->src.x2) - 1) << 16) |
fixed16_to_int(state->src.x1);
priv->viu.osd1_blk0_cfg[2] =
((fixed16_to_int(state->src.y2) - 1) << 16) |
fixed16_to_int(state->src.y1);
priv->viu.osd1_blk0_cfg[3] = ((dest.x2 - 1) << 16) | dest.x1;
priv->viu.osd1_blk0_cfg[4] = ((dest.y2 - 1) << 16) | dest.y1;
if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu")) {
priv->viu.osd_blend_din0_scope_h = ((dest.x2 - 1) << 16) | dest.x1;
priv->viu.osd_blend_din0_scope_v = ((dest.y2 - 1) << 16) | dest.y1;
priv->viu.osb_blend0_size = dst_h << 16 | dst_w;
priv->viu.osb_blend1_size = dst_h << 16 | dst_w;
}
/* Update Canvas with buffer address */
gem = drm_fb_cma_get_gem_obj(fb, 0);
priv->viu.osd1_addr = gem->paddr;
priv->viu.osd1_stride = fb->pitches[0];
priv->viu.osd1_height = fb->height;
if (!meson_plane->enabled) {
/* Reset OSD1 before enabling it on GXL+ SoCs */
if (meson_vpu_is_compatible(priv, "amlogic,meson-gxm-vpu") ||
meson_vpu_is_compatible(priv, "amlogic,meson-gxl-vpu"))
meson_viu_osd1_reset(priv);
meson_plane->enabled = true;
}
priv->viu.osd1_enabled = true;
spin_unlock_irqrestore(&priv->drm->event_lock, flags);
}
static void meson_plane_atomic_disable(struct drm_plane *plane,
struct drm_plane_state *old_state)
{
struct meson_plane *meson_plane = to_meson_plane(plane);
struct meson_drm *priv = meson_plane->priv;
/* Disable OSD1 */
if (meson_vpu_is_compatible(priv, "amlogic,meson-g12a-vpu"))
writel_bits_relaxed(3 << 8, 0,
priv->io_base + _REG(OSD1_BLEND_SRC_CTRL));
else
writel_bits_relaxed(VPP_OSD1_POSTBLEND, 0,
priv->io_base + _REG(VPP_MISC));
meson_plane->enabled = false;
priv->viu.osd1_enabled = false;
}
static const struct drm_plane_helper_funcs meson_plane_helper_funcs = {
.atomic_check = meson_plane_atomic_check,
.atomic_disable = meson_plane_atomic_disable,
.atomic_update = meson_plane_atomic_update,
.prepare_fb = drm_gem_fb_prepare_fb,
};
static const struct drm_plane_funcs meson_plane_funcs = {
.update_plane = drm_atomic_helper_update_plane,
.disable_plane = drm_atomic_helper_disable_plane,
.destroy = drm_plane_cleanup,
.reset = drm_atomic_helper_plane_reset,
.atomic_duplicate_state = drm_atomic_helper_plane_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_plane_destroy_state,
};
static const uint32_t supported_drm_formats[] = {
DRM_FORMAT_ARGB8888,
DRM_FORMAT_ABGR8888,
DRM_FORMAT_XRGB8888,
DRM_FORMAT_XBGR8888,
DRM_FORMAT_RGB888,
DRM_FORMAT_RGB565,
};
int meson_plane_create(struct meson_drm *priv)
{
struct meson_plane *meson_plane;
struct drm_plane *plane;
meson_plane = devm_kzalloc(priv->drm->dev, sizeof(*meson_plane),
GFP_KERNEL);
if (!meson_plane)
return -ENOMEM;
meson_plane->priv = priv;
plane = &meson_plane->base;
drm_universal_plane_init(priv->drm, plane, 0xFF,
&meson_plane_funcs,
supported_drm_formats,
ARRAY_SIZE(supported_drm_formats),
NULL,
DRM_PLANE_TYPE_PRIMARY, "meson_primary_plane");
drm_plane_helper_add(plane, &meson_plane_helper_funcs);
/* For now, OSD Primary plane is always on the front */
drm_plane_create_zpos_immutable_property(plane, 1);
priv->primary_plane = plane;
return 0;
}