OpenCloudOS-Kernel/drivers/scsi
Andrew Vasquez 3fe7cfb910 [SCSI] qla2xxx: Check alternate 'reason' code during GPSC status handling.
Some switches return 0x09 (Command not supported) as the reason
code for GPSC failure.  Check for this code, and disable
additional GPSC queries if found.

Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-04-07 12:19:14 -05:00
..
aacraid [SCSI] aacraid, ips: leX_add_cpu conversion 2008-04-07 12:19:05 -05:00
aic7xxx [SCSI] aic7xxx: Test opcode, not definition in aicasm:type_check() 2008-04-07 12:18:59 -05:00
aic7xxx_old
aic94xx [SCSI] aic94xx: cleanups 2008-04-07 12:19:08 -05:00
arcmsr [SCSI] arcmsr: fix iounmap error for Type B adapter 2008-03-14 15:25:26 -05:00
arm [SCSI] Remove random noop unchecked_isa_dma users 2008-04-07 12:15:40 -05:00
dpt [SCSI] dpt: whitespace cleanup 2007-04-01 10:10:04 -05:00
ibmvscsi [SCSI] tgt: fix build errors when dprintk is defined 2008-03-03 13:19:52 -06:00
libsas [SCSI] libsas: Provide a transport-level facility to request SAS addrs 2008-04-07 12:15:38 -05:00
lpfc [SCSI] lpfc: Balance locking 2008-02-22 17:15:35 -06:00
megaraid [SCSI] megaraid_sas: Add the new controller(1078DE) support to the driver 2008-04-07 12:19:00 -05:00
pcmcia pcmcia: convert some internal-only ioaddr_t to unsigned int 2008-02-05 09:44:08 -08:00
qla2xxx [SCSI] qla2xxx: Check alternate 'reason' code during GPSC status handling. 2008-04-07 12:19:14 -05:00
qla4xxx [SCSI] qla4xxx: fix scsi command completion, lun reset and target reset code 2008-04-07 12:19:00 -05:00
sym53c8xx_2 [SCSI] sym53c8xx: fix resid calculation 2008-02-07 18:02:34 -06:00
.gitignore [SCSI] 53c7xx: fix removal fallout 2008-01-11 18:22:30 -06:00
3w-9xxx.c [SCSI] 3w-9xxx, 3w-xxxx: memset not needed in probe 2008-04-07 12:18:59 -05:00
3w-9xxx.h [SCSI] 3w-9xxx: add support for 9690SA 2007-07-21 08:57:40 -05:00
3w-xxxx.c [SCSI] 3w-9xxx, 3w-xxxx: memset not needed in probe 2008-04-07 12:18:59 -05:00
3w-xxxx.h [SCSI] 3ware 8000 serialize reset code 2007-01-06 09:18:00 -06:00
53c700.c [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE 2008-01-23 11:29:27 -06:00
53c700.h [SCSI] 53c700: m68k support for the 53c700 SCSI core 2007-06-17 16:15:56 -05:00
53c700.scr
53c700_d.h_shipped
BusLogic.c [SCSI] BusLogic: make FlashPoint support x86-32 only 2008-04-07 12:15:44 -05:00
BusLogic.h [SCSI] BusLogic: make FlashPoint support x86-32 only 2008-04-07 12:15:44 -05:00
FlashPoint.c [SCSI] BusLogic: make FlashPoint support x86-32 only 2008-04-07 12:15:44 -05:00
Kconfig [SCSI] BusLogic: make FlashPoint support x86-32 only 2008-04-07 12:15:44 -05:00
Makefile [SCSI] mvsas: Add Marvell 6440 SAS/SATA driver 2008-02-23 07:29:31 -06:00
NCR53c406a.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
NCR5380.c [SCSI] NCR5380: fix section mismatch 2008-01-23 13:44:31 -06:00
NCR5380.h [SCSI] NCR5380: Use scsi_eh API for REQUEST_SENSE invocation 2007-10-12 14:55:07 -04:00
NCR_D700.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
NCR_D700.h
NCR_Q720.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
NCR_Q720.h
a100u2w.c [SCSI] a100u2w: fix bitmap lookup routine 2008-03-20 09:19:25 -05:00
a100u2w.h [SCSI] a100u2w: Convert into Linux style 2007-06-17 16:09:29 -05:00
a2091.c [SCSI] wd33c93: fix up cut and paste error 2008-04-07 12:19:07 -05:00
a2091.h [SCSI] wd33c93: Scsi_Cmnd convertion 2006-09-12 17:12:31 -05:00
a3000.c [SCSI] WD33C93: let platform stub override no_sync/fast/dma_mode 2008-04-07 12:19:01 -05:00
a3000.h [SCSI] wd33c93: Scsi_Cmnd convertion 2006-09-12 17:12:31 -05:00
a4000t.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
advansys.c [SCSI] advansys: Fix bug in AdvLoadMicrocode 2008-03-07 10:05:43 -06:00
aha152x.c [SCSI] aha152x: Use scsi_eh API for REQUEST_SENSE invocation 2008-01-11 18:22:34 -06:00
aha152x.h [SCSI] aha152x: fix debug mode symbol conflict 2007-08-04 09:11:06 -05:00
aha1542.c MAINTAINERS: remove Adam Fritzler, remove his email address in other sources 2008-02-03 16:36:24 +02:00
aha1542.h
aha1740.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
aha1740.h
aic7xxx_old.c Remove pointless casts from void pointers 2008-02-06 10:41:01 -08:00
atari_NCR5380.c [SCSI] atari_NCR5380, sun3_NCR5380: operator precedence fix 2008-01-11 18:28:57 -06:00
atari_dma_emul.c IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 2006-10-05 15:10:12 +01:00
atari_scsi.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
atari_scsi.h m68k: Atari SCSI driver compile fixes 2007-05-04 17:59:05 -07:00
atp870u.c [SCSI] atp870u: convert to accessors and !use_sg cleanup 2008-01-11 18:22:38 -06:00
atp870u.h
bvme6000_scsi.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
ch.c [SCSI] ch: fix sparse shadowed variable warnings 2008-04-07 12:19:08 -05:00
constants.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
dc395x.c [SCSI] Remove random noop unchecked_isa_dma users 2008-04-07 12:15:40 -05:00
dc395x.h
dmx3191d.c [SCSI] pci_module_init conversion in scsi subsystem 2006-09-26 11:35:32 -07:00
dpt_i2o.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
dpti.h revert "dpt_i2o: convert to SCSI hotplug model" 2007-12-10 19:43:54 -08:00
dtc.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
dtc.h
eata.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
eata_generic.h [SCSI] eata_pio: Remove FALSE/TRUE defines 2007-03-20 11:27:03 -05:00
eata_pio.c [SCSI] Remove random noop unchecked_isa_dma users 2008-04-07 12:15:40 -05:00
eata_pio.h
esp_scsi.c esp_scsi: fix reset cleanup spinlock recursion 2007-12-10 19:43:55 -08:00
esp_scsi.h [SCSI] ESP: Revert ESP_BUS_TIMEOUT back down to 250 2007-07-31 10:51:25 -05:00
fd_mcs.c [SCSI] fd_mcs: convert to accessors and !use_sg cleanup 2008-01-11 18:22:35 -06:00
fdomain.c [SG] Update drivers to use sg helpers 2007-10-22 21:19:53 +02:00
fdomain.h
g_NCR5380.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
g_NCR5380.h
g_NCR5380_mmio.c
gdth.c [SCSI] gdth: remove command accessors 2008-04-07 12:15:39 -05:00
gdth.h [SCSI] gdth: PCI probe cleanups, prep for PCI hotplug API conversion 2008-04-07 12:15:36 -05:00
gdth_ioctl.h
gdth_proc.c [SCSI] gdth: don't call pci_free_consistent under spinlock 2008-02-18 09:02:25 -06:00
gdth_proc.h [SCSI] gdth: clean up host private data 2007-10-12 14:55:46 -04:00
gvp11.c [SCSI] wd33c93: fix up cut and paste error 2008-04-07 12:19:07 -05:00
gvp11.h [SCSI] wd33c93: Scsi_Cmnd convertion 2006-09-12 17:12:31 -05:00
hosts.c [SCSI] hosts.c: removed one unneeded shost->active_mode assignment 2008-04-07 12:19:05 -05:00
hptiop.c [SCSI] hptiop: fix header.context usage 2008-04-07 12:19:08 -05:00
hptiop.h [SCSI] hptiop: add more adapter models and other fixes 2008-01-11 18:28:06 -06:00
ibmmca.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
ide-scsi.c ide: add ide_read_[alt]status() inline helpers 2008-02-06 02:57:51 +01:00
imm.c [SCSI] imm: convert to accessors and !use_sg cleanup 2008-01-11 18:22:41 -06:00
imm.h Remove all inclusions of <linux/config.h> 2006-10-04 03:38:54 -04:00
in2000.c [SCSI] in2000: convert to accessors and !use_sg cleanup 2008-01-11 18:22:36 -06:00
in2000.h
initio.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
initio.h [SCSI] initio: Convert into a real Linux driver and update to modern style 2007-05-22 11:08:56 -05:00
ipr.c libata: eliminate the home grown dma padding in favour of 2008-02-19 11:36:56 +01:00
ipr.h [SCSI] ipr: Use PCI-E reset API for new ipr adapter 2007-05-08 11:54:40 -05:00
ips.c [SCSI] ips: remove spurious cpu_to_leX on outX statements 2008-04-07 12:19:11 -05:00
ips.h [SCSI] ips: trim trailing whitespace 2008-01-11 18:27:59 -06:00
iscsi_tcp.c [SCSI] iscsi: fix up iscsi printk prefix 2008-02-07 18:02:37 -06:00
iscsi_tcp.h [SCSI] iscsi_tcp: enable sg chaining 2008-01-11 18:28:48 -06:00
jazz_esp.c [SCSI] esp: use shost_priv 2007-05-31 17:30:04 -04:00
lasi700.c some kmalloc/memset ->kzalloc (tree wide) 2007-07-19 10:04:50 -07:00
libiscsi.c [SCSI] iscsi regression: check for zero max session cmds 2008-02-27 15:52:46 -08:00
libsrp.c [SCSI] implement scsi_data_buffer 2008-01-30 13:03:40 -06:00
mac53c94.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
mac53c94.h
mac_scsi.c [SCSI] Remove random noop unchecked_isa_dma users 2008-04-07 12:15:40 -05:00
mac_scsi.h
megaraid.c [SCSI] megaraid: outb_p extermination 2008-02-18 08:57:16 -06:00
megaraid.h [SCSI] megaraid: fix warnings when CONFIG_PROC_FS=n 2007-05-08 11:15:08 -05:00
mesh.c PM: Introduce PM_EVENT_HIBERNATE callback state 2008-02-23 10:40:04 -08:00
mesh.h
mvme16x_scsi.c [SCSI] kmalloc + memset conversion to kzalloc 2007-10-12 14:41:00 -04:00
mvme147.c [SCSI] wd33c93: fix up cut and paste error 2008-04-07 12:19:07 -05:00
mvme147.h [SCSI] wd33c93: Scsi_Cmnd convertion 2006-09-12 17:12:31 -05:00
mvsas.c [SCSI] mvsas: check subsystem id 2008-03-28 12:32:22 -05:00
ncr53c8xx.c [SCSI] ncr53c8xx: fix sense_buffer access bug 2008-01-30 13:03:39 -06:00
ncr53c8xx.h [SCSI] ncr53c8xx: Call scsi_host_put in release 2007-10-12 14:51:18 -04:00
nsp32.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
nsp32.h define global BIT macro 2007-10-19 11:53:42 -07:00
nsp32_debug.c
nsp32_io.h
osst.c [SCSI] osst: fix if (...) \n #if... cases missing semicolons when false 2007-10-27 14:31:06 -05:00
osst.h [SCSI] osst: Use mutex instead of semaphore 2007-10-12 14:50:55 -04:00
osst_detect.h
osst_options.h
pas16.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
pas16.h
ppa.c [SCSI] ppa: convert to accessors and !use_sg cleanup 2008-01-11 18:22:41 -06:00
ppa.h Remove all inclusions of <linux/config.h> 2006-10-04 03:38:54 -04:00
ps3rom.c [SCSI] ps3rom: use scsi_build_sense_buffer 2008-04-07 12:19:02 -05:00
ql1040_fw.h
ql1280_fw.h
ql12160_fw.h
qla1280.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
qla1280.h [SCSI] qla1280: eliminate wasted space in request and response ring 2007-10-23 12:35:35 -04:00
qlogicfas.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
qlogicfas408.c [SG] Update drivers to use sg helpers 2007-10-22 21:19:53 +02:00
qlogicfas408.h [SCSI] Scsi_Cmnd conversion in qlogicfas408 driver 2006-10-25 15:11:55 -07:00
qlogicpti.c [SCSI] qlogicpt: section fixes 2008-02-23 09:07:32 -06:00
qlogicpti.h [SCSI] qlogicpti: Add a slave_configure method 2007-10-12 14:52:38 -04:00
qlogicpti_asm.c [SPARC]: Fix some section mismatch warnings in sparc drivers. 2006-10-17 19:28:51 -07:00
raid_class.c [SCSI] transport_class: BUG if we can't release the attribute container 2008-04-07 12:19:10 -05:00
script_asm.pl
scsi.c [SCSI] export command allocation and freeing functions independently of the host 2008-04-07 12:18:57 -05:00
scsi.h
scsi_debug.c [SCSI] scsi_debug: remove unnecessary function declarations 2008-04-07 12:19:07 -05:00
scsi_devinfo.c [SCSI] kernel-doc: use correct function name 2008-01-11 18:22:44 -06:00
scsi_error.c [SCSI] add scsi_build_sense_buffer helper function 2008-04-07 12:19:01 -05:00
scsi_ioctl.c [SCSI] sd,sr: add early detection of medium not present 2008-01-11 18:22:50 -06:00
scsi_lib.c [SCSI] fix barrier failure issue 2008-04-07 12:19:10 -05:00
scsi_lib_dma.c [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA 2007-07-14 19:28:10 -05:00
scsi_logging.h
scsi_module.c
scsi_netlink.c [NETNS]: Consolidate kernel netlink socket destruction. 2008-01-28 15:08:07 -08:00
scsi_priv.h [SCSI] don't use __GFP_DMA for sense buffers if not required 2008-01-23 11:37:44 -06:00
scsi_proc.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
scsi_sas_internal.h
scsi_scan.c [SCSI] docbook: fix scsi source file 2008-03-03 13:17:14 -06:00
scsi_sysctl.c [SCSI] small cleanups 2007-07-18 11:16:32 -05:00
scsi_sysfs.c Revert "[SCSI] fix bsg queue oops with iscsi logout" 2008-03-26 09:09:19 -07:00
scsi_tgt_if.c [SCSI] tgt: convert to use the data buffer accessors 2008-01-11 18:22:30 -06:00
scsi_tgt_lib.c [SCSI] tgt: set the data length properly 2008-03-03 13:19:35 -06:00
scsi_tgt_priv.h [SCSI] tgt: add I_T nexus support 2007-10-12 14:37:50 -04:00
scsi_transport_api.h
scsi_transport_fc.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
scsi_transport_fc_internal.h [SCSI] fc_transport: add target driver support 2007-10-12 14:46:58 -04:00
scsi_transport_iscsi.c [SCSI] iscsi class: regression - fix races with state manipulation and blocking/unblocking 2008-03-05 12:04:09 -06:00
scsi_transport_sas.c drivers/scsi/: Spelling fixes 2008-02-03 17:28:22 +02:00
scsi_transport_spi.c [SCSI] scsi_transport_spi: convert to attribute groups 2008-01-23 11:29:18 -06:00
scsi_transport_srp.c [SCSI] docbook and kernel-doc updates 2008-01-11 18:22:45 -06:00
scsi_transport_srp_internal.h [SCSI] scsi_transport_srp: remove tgt dependencies 2007-10-12 14:38:09 -04:00
scsi_typedefs.h
scsi_wait_scan.c [SCSI] Add ability to scan scsi busses asynchronously 2006-10-11 13:44:25 -05:00
scsicam.c [SCSI] Add Documentation and integrate into docbook build 2008-01-11 18:22:40 -06:00
sd.c [SCSI] sd, sr: do not emit change event at device add 2008-03-19 11:28:56 -05:00
ses.c [SCSI] ses: fix data corruption 2008-02-18 08:57:15 -06:00
sg.c Convert SG from nopage to fault. 2008-02-07 19:09:22 -08:00
sgiwd93.c [SCSI] WD33C93: let platform stub override no_sync/fast/dma_mode 2008-04-07 12:19:01 -05:00
sim710.c Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6 2007-07-22 11:36:49 -07:00
sni_53c710.c [SCSI] sni_53c710: Cleanup 2007-07-14 19:12:15 -05:00
sr.c [SCSI] sd, sr: do not emit change event at device add 2008-03-19 11:28:56 -05:00
sr.h [SCSI] sr: fix test unit ready responses 2008-02-07 18:02:44 -06:00
sr_ioctl.c [SCSI] sr: fix test unit ready responses 2008-02-07 18:02:44 -06:00
sr_vendor.c [PATCH] getting rid of all casts of k[cmz]alloc() calls 2006-12-13 09:05:58 -08:00
st.c [SCSI] st: show options currently set in sysfs 2008-04-07 12:15:40 -05:00
st.h [SCSI] st: add option to use SILI in variable block reads 2008-04-07 12:15:39 -05:00
st_options.h [SCSI] st: add option to use SILI in variable block reads 2008-04-07 12:15:39 -05:00
stex.c [SCSI] stex: use scsi_build_sense_buffer 2008-04-07 12:19:02 -05:00
sun3_NCR5380.c [SCSI] atari_NCR5380, sun3_NCR5380: operator precedence fix 2008-01-11 18:28:57 -06:00
sun3_scsi.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
sun3_scsi.h [PATCH] Sun3 SCSI: Make sun3 scsi drivers compile/work again 2006-12-09 09:41:18 -08:00
sun3_scsi_vme.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
sun3x_esp.c [SCSI] sun3x_esp: convert to esp_scsi 2008-02-07 18:02:33 -06:00
sun_esp.c [SCSI] esp: use shost_priv 2007-05-31 17:30:04 -04:00
sym53c416.c [SCSI] sym53c416: fix module parameters 2008-02-12 15:24:58 -06:00
sym53c416.h
t128.c [SCSI] NCR5380: Fix bugs and canonicalize irq handler usage 2007-11-25 12:19:26 +02:00
t128.h [SCSI] scsi: t128 scsi_cmnd convertion 2006-11-15 16:43:50 -06:00
tmscsim.c [SCSI] replace sizeof sense_buffer with SCSI_SENSE_BUFFERSIZE 2008-01-23 11:29:27 -06:00
tmscsim.h [SCSI] tmscsim: Further clean-up of the driver 2007-07-14 18:56:33 -05:00
u14-34f.c [SCSI] u14-34f: fix data direction bug 2008-02-07 18:02:44 -06:00
ultrastor.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
ultrastor.h [SCSI] scsi-driver ultrastore replace Scsi_Cmnd with struct scsi_cmnd 2006-09-07 12:39:34 -05:00
wd33c93.c [SCSI] WD33C93: let platform stub override no_sync/fast/dma_mode 2008-04-07 12:19:01 -05:00
wd33c93.h Spelling fix: explicitly 2007-10-19 23:22:55 +02:00
wd7000.c [SCSI] remove use_sg_chaining 2008-01-30 13:14:02 -06:00
zalon.c
zorro7xx.c m68k: zorro7xx needs <asm/amigahw.h> 2007-11-29 09:24:52 -08:00