OpenCloudOS-Kernel/drivers/net/phy
Jose Abreu fe4a7a4176 net: phy: Do not check Link status when loopback is enabled
While running stmmac selftests I found that in my 1G setup some tests
were failling when running with PHY loopback enabled.

It looks like when loopback is enabled the PHY will report that Link is
down even though there is a valid connection.

As in loopback mode the data will not be sent anywhere we can bypass the
logic of checking if Link is valid thus saving unecessary reads.

Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2019-09-06 15:11:21 +02:00
..
Kconfig net: phy: adin: add support for Analog Devices PHYs 2019-08-16 11:56:25 -07:00
Makefile net: phy: adin: add support for Analog Devices PHYs 2019-08-16 11:56:25 -07:00
adin.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
amd.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
aquantia.h net: phy: aquantia: add hwmon support 2019-02-25 14:16:22 -08:00
aquantia_hwmon.c net: phy: aquantia: add hwmon support 2019-02-25 14:16:22 -08:00
aquantia_main.c net: phy: aquantia: add USXGMII support and warn if XGMII mode is set 2019-05-24 13:39:34 -07:00
at803x.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2019-08-19 11:54:03 -07:00
ax88796b.c net: phy: rename Asix Electronics PHY driver 2019-06-09 13:24:17 -07:00
bcm-cygnus.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
bcm-phy-lib.c net: phy: Prepare for moving Omega out of bcm7xxx 2019-03-21 13:41:26 -07:00
bcm-phy-lib.h net: phy: Prepare for moving Omega out of bcm7xxx 2019-03-21 13:41:26 -07:00
bcm7xxx.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
bcm63xx.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
bcm87xx.c net: phy: bcm87xx: improve bcm87xx_config_init and feature detection 2019-05-26 21:56:41 -07:00
broadcom.c net: phy: broadcom: Add genphy_suspend and genphy_resume for BCM5464 2019-06-09 20:05:19 -07:00
cicada.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
cortina.c net: phy: remove gen10g_no_soft_reset 2019-03-03 21:47:57 -08:00
davicom.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
dp83tc811.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
dp83640.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
dp83640_reg.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
dp83822.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
dp83848.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
dp83867.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-05-31 10:49:43 -07:00
et1011c.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
fixed_phy.c net: phy: fixed_phy: print gpio error only if gpio node is present 2019-07-30 09:54:45 -07:00
icplus.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
intel-xway.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
lxt.c net: phy: lxt: Add suspend/resume support to LXT971 and LXT973. 2019-05-23 09:19:21 -07:00
marvell.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net 2019-05-02 22:14:21 -04:00
marvell10g.c net: phy: marvell10g: report if the PHY fails to boot firmware 2019-05-29 14:25:10 -07:00
mdio-aspeed.c net: phy: Add mdio-aspeed 2019-08-02 17:56:28 -07:00
mdio-bcm-iproc.c phy: mdio-bcm-iproc: use devm_platform_ioremap_resource() to simplify code 2019-08-28 14:51:00 -07:00
mdio-bcm-unimac.c net: phy: mdio-bcm-unimac: remove redundant !timeout check 2019-03-27 14:27:30 -07:00
mdio-bitbang.c net: phy: Fixup GPLv2 SPDX tags based on license text 2019-01-22 20:58:40 -08:00
mdio-boardinfo.c net: phy: Convert some PHY and MDIO driver files to SPDX headers 2019-01-22 20:53:08 -08:00
mdio-boardinfo.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
mdio-cavium.c net: phy: Add SDPX tag based on COPYING file 2019-01-22 20:59:18 -08:00
mdio-cavium.h net: mdio-octeon: Fix Kconfig warnings and build errors 2019-08-06 14:11:08 -07:00
mdio-gpio.c net: phy: Fixup GPLv2 SPDX tags based on license text 2019-01-22 20:58:40 -08:00
mdio-hisi-femac.c phy: mdio-hisi-femac: use devm_platform_ioremap_resource() to simplify code 2019-08-28 14:51:00 -07:00
mdio-i2c.c net: phy: Convert some PHY and MDIO driver files to SPDX headers 2019-01-22 20:53:08 -08:00
mdio-i2c.h net: phy: Convert some PHY and MDIO driver files to SPDX headers 2019-01-22 20:53:08 -08:00
mdio-moxart.c phy: mdio-moxart: use devm_platform_ioremap_resource() to simplify code 2019-08-28 14:51:00 -07:00
mdio-mscc-miim.c drivers: net: Remove device_node checks with of_mdiobus_register() 2018-05-16 14:20:36 -04:00
mdio-mux-bcm-iproc.c net: phy: Convert some PHY and MDIO driver files to SPDX headers 2019-01-22 20:53:08 -08:00
mdio-mux-gpio.c net: phy: Add SDPX tag based on COPYING file 2019-01-22 20:59:18 -08:00
mdio-mux-meson-g12a.c phy: mdio-mux-meson-g12a: use devm_platform_ioremap_resource() to simplify code 2019-08-28 14:51:00 -07:00
mdio-mux-mmioreg.c net: phy: Convert some PHY and MDIO driver files to SPDX headers 2019-01-22 20:53:08 -08:00
mdio-mux-multiplexer.c drivers: net: phy: mdio-mux: Add support for Generic Mux controls 2019-02-27 12:52:20 -08:00
mdio-mux.c net: phy: Add SDPX tag based on COPYING file 2019-01-22 20:59:18 -08:00
mdio-octeon.c net: phy: Add SDPX tag based on COPYING file 2019-01-22 20:59:18 -08:00
mdio-sun4i.c phy: mdio-sun4i: use devm_platform_ioremap_resource() to simplify code 2019-08-28 14:51:00 -07:00
mdio-thunder.c net: phy: Add SDPX tag based on COPYING file 2019-01-22 20:59:18 -08:00
mdio-xgene.c net: phy: xgene: use devm_platform_ioremap_resource() to simplify code 2019-08-01 13:10:34 -04:00
mdio-xgene.h net: phy: Convert some PHY and MDIO driver files to SPDX headers 2019-01-22 20:53:08 -08:00
mdio_bus.c net: mdio: rename mdio_device reset to reset_gpio 2019-04-18 17:42:54 -07:00
mdio_device.c net: mdio: rename mdio_device reset to reset_gpio 2019-04-18 17:42:54 -07:00
meson-gxl.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
micrel.c net: phy: micrel: make sure the factory test bit is cleared 2019-04-29 23:17:21 -04:00
microchip.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
microchip_t1.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
mscc.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
national.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
nxp-tja11xx.c net: phy: tja11xx: Switch to HWMON_CHANNEL_INFO() 2019-05-29 22:02:18 -07:00
phy-c45.c Add genphy_c45_config_aneg() function to phy-c45.c 2019-08-27 20:21:15 -07:00
phy-core.c net: phy: add phy_speed_down_core and phy_resolve_min_speed 2019-08-13 17:14:06 -07:00
phy.c net: phy: Do not check Link status when loopback is enabled 2019-09-06 15:11:21 +02:00
phy_device.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net 2019-08-19 11:54:03 -07:00
phy_led_triggers.c net: phy: phy_led_triggers: Fix a possible null-pointer dereference in phy_led_trigger_change_speed() 2019-07-31 18:56:11 -04:00
phylink.c net: phylink: Fix flow control for fixed-link 2019-07-27 14:27:51 -07:00
qsemi.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
realtek.c net: phy: realtek: support NBase-T MMD EEE registers on RTL8125 2019-08-19 13:04:45 -07:00
rockchip.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
sfp-bus.c net: sfp: remove sfp-bus use of netdevs 2019-05-31 12:37:46 -07:00
sfp.c net: phy: sfp: Add labels to hwmon sensors 2019-08-24 17:01:36 -07:00
sfp.h net: sfp: do not probe SFP module before we're attached 2019-02-08 15:11:25 -08:00
smsc.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
spi_ks8995.c spi: Micrel eth switch: declare missing of table 2019-04-23 10:44:44 -07:00
ste10Xp.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
swphy.c net: phy: swphy: emulate register MII_ESTATUS 2019-08-15 11:43:48 -07:00
swphy.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
teranetics.c net: phy: remove gen10g_no_soft_reset 2019-03-03 21:47:57 -08:00
uPD60620.c net: phy: switch drivers to use dynamic feature detection 2019-04-15 17:19:54 -07:00
vitesse.c net: phy: remove calls to genphy_config_init 2019-08-17 12:34:50 -07:00
xilinx_gmii2rgmii.c net: phy: gmii2rgmii: Dont use priv field in phy device 2019-09-05 12:32:06 +02:00