OpenCloudOS-Kernel/arch/um/drivers
Jason A. Donenfeld 16bdbae394 hwrng: core - treat default_quality as a maximum and default to 1024
Most hw_random devices return entropy which is assumed to be of full
quality, but driver authors don't bother setting the quality knob. Some
hw_random devices return less than full quality entropy, and then driver
authors set the quality knob. Therefore, the entropy crediting should be
opt-out rather than opt-in per-driver, to reflect the actual reality on
the ground.

For example, the two Raspberry Pi RNG drivers produce full entropy
randomness, and both EDK2 and U-Boot's drivers for these treat them as
such. The result is that EFI then uses these numbers and passes the to
Linux, and Linux credits them as boot, thereby initializing the RNG.
Yet, in Linux, the quality knob was never set to anything, and so on the
chance that Linux is booted without EFI, nothing is ever credited.
That's annoying.

The same pattern appears to repeat itself throughout various drivers. In
fact, very very few drivers have bothered setting quality=1024.

Looking at the git history of existing drivers and corresponding mailing
list discussion, this conclusion tracks. There's been a decent amount of
discussion about drivers that set quality < 1024 -- somebody read and
interepreted a datasheet, or made some back of the envelope calculation
somehow. But there's been very little, if any, discussion about most
drivers where the quality is just set to 1024 or unset (or set to 1000
when the authors misunderstood the API and assumed it was base-10 rather
than base-2); in both cases the intent was fairly clear of, "this is a
hardware random device; it's fine."

So let's invert this logic. A hw_random struct's quality knob now
controls the maximum quality a driver can produce, or 0 to specify 1024.
Then, the module-wide switch called "default_quality" is changed to
represent the maximum quality of any driver. By default it's 1024, and
the quality of any particular driver is then given by:

    min(default_quality, rng->quality ?: 1024);

This way, the user can still turn this off for weird reasons (and we can
replace whatever driver-specific disabling hacks existed in the past),
yet we get proper crediting for relevant RNGs.

Cc: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Ard Biesheuvel <ardb@kernel.org>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2022-11-18 16:59:34 +08:00
..
Kconfig um/drivers: Kconfig: Fix indentation 2022-07-17 23:12:46 +02:00
Makefile um: xterm: Make default terminal emulator configurable 2022-05-27 08:50:07 +02:00
chan.h um: remove unused reactivate_chan() declaration 2022-09-19 23:02:21 +02:00
chan_kern.c um: line: Use separate IRQs per line 2022-05-27 09:03:41 +02:00
chan_user.c um: chan_user: Fix winch_tramp() return value 2022-05-27 09:03:41 +02:00
chan_user.h um: Add an option to make serial driver non-raw 2020-01-19 22:41:50 +01:00
cow.h treewide: remove editor modelines and cruft 2021-05-07 00:26:34 -07:00
cow_sys.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
cow_user.c um: ubd: use 64-bit time_t where possible 2019-12-18 18:07:31 +01:00
daemon.h um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
daemon_kern.c um: daemon: Make default socket configurable 2022-05-27 09:00:40 +02:00
daemon_user.c um: Some fixes to build UML with musl 2020-10-11 23:13:06 +02:00
fd.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
harddog_kern.c compat_ioctl: move WDIOC handling into wdt drivers 2019-10-23 17:23:46 +02:00
harddog_user.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
hostaudio_kern.c um: Remove unneeded variable 'ret' 2021-04-15 23:10:33 +02:00
line.c um: line: Use separate IRQs per line 2022-05-27 09:03:41 +02:00
line.h um: line: Use separate IRQs per line 2022-05-27 09:03:41 +02:00
mconsole.h um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
mconsole_kern.c um: Do not initialise statics to 0. 2022-09-19 23:10:07 +02:00
mconsole_kern.h um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
mconsole_user.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
mmapper_kern.c um: mmaper: add __exit annotations to module exit funcs 2022-09-19 23:01:50 +02:00
net_kern.c um: move from strlcpy with unused retval to strscpy 2022-09-19 22:45:24 +02:00
net_user.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
null.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
pcap_kern.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
pcap_user.c um: Some fixes to build UML with musl 2020-10-11 23:13:06 +02:00
pcap_user.h um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
port.h um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
port_kern.c um: Support dynamic IRQ allocation 2020-12-13 22:22:08 +01:00
port_user.c um: port_user: Improve error handling when port-helper is not found 2022-03-11 10:55:55 +01:00
pty.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
random.c hwrng: core - treat default_quality as a maximum and default to 1024 2022-11-18 16:59:34 +08:00
rtc.h um: add a pseudo RTC 2021-02-12 21:38:52 +01:00
rtc_kern.c um: add a pseudo RTC 2021-02-12 21:38:52 +01:00
rtc_user.c isystem: trim/fixup stdarg.h and other headers 2021-08-19 09:02:55 +09:00
slip.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
slip_common.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
slip_common.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
slip_kern.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
slip_user.c um: fix error return code in slip_open() 2021-06-17 22:10:05 +02:00
slirp.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
slirp_kern.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
slirp_user.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
ssl.c um: Do not initialise statics to 0. 2022-09-19 23:10:07 +02:00
stderr_console.c License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
stdio_console.c um: Do not initialise statics to 0. 2022-09-19 23:10:07 +02:00
stdio_console.h um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
tty.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
ubd.h um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
ubd_kern.c um: Do not initialise statics to 0. 2022-09-19 23:10:07 +02:00
ubd_user.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
umcast.h um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
umcast_kern.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
umcast_user.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
vde.h um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
vde_kern.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
vde_user.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
vector_kern.c um: move from strlcpy with unused retval to strscpy 2022-09-19 22:45:24 +02:00
vector_kern.h um: Migrate vector drivers to NAPI 2022-03-11 10:45:21 +01:00
vector_transports.c um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
vector_user.c uml: net: vector: fix const issue 2022-03-11 10:47:05 +01:00
vector_user.h uml: net: vector: fix const issue 2022-03-11 10:47:05 +01:00
vhost_user.h um: virtio: Replace zero-length array with flexible-array 2020-06-02 22:38:00 +02:00
virt-pci.c um: virt-pci: add __init/__exit annotations to module init/exit funcs 2022-09-19 23:01:20 +02:00
virtio_uml.c um: read multiple msg from virtio slave request fd 2022-09-19 22:28:25 +02:00
xterm.c um: xterm: Make default terminal emulator configurable 2022-05-27 08:50:07 +02:00
xterm.h um: Add SPDX headers for files in arch/um/drivers 2019-09-15 21:37:16 +02:00
xterm_kern.c um: Support dynamic IRQ allocation 2020-12-13 22:22:08 +01:00