101 lines
3.8 KiB
C
101 lines
3.8 KiB
C
/* $Id: boardergo.h,v 1.2.6.1 2001/09/23 22:24:54 kai Exp $
|
|
*
|
|
* Linux driver for HYSDN cards, definitions for ergo type boards (buffers..).
|
|
*
|
|
* Author Werner Cornelius (werner@titro.de) for Hypercope GmbH
|
|
* Copyright 1999 by Werner Cornelius (werner@titro.de)
|
|
*
|
|
* This software may be used and distributed according to the terms
|
|
* of the GNU General Public License, incorporated herein by reference.
|
|
*
|
|
*/
|
|
|
|
|
|
/************************************************/
|
|
/* defines for the dual port memory of the card */
|
|
/************************************************/
|
|
#define ERG_DPRAM_PAGE_SIZE 0x2000 /* DPRAM occupies a 8K page */
|
|
#define BOOT_IMG_SIZE 4096
|
|
#define ERG_DPRAM_FILL_SIZE (ERG_DPRAM_PAGE_SIZE - BOOT_IMG_SIZE)
|
|
|
|
#define ERG_TO_HY_BUF_SIZE 0x0E00 /* 3072 bytes buffer size to card */
|
|
#define ERG_TO_PC_BUF_SIZE 0x0E00 /* 3072 bytes to PC, too */
|
|
|
|
/* following DPRAM layout copied from OS2-driver boarderg.h */
|
|
typedef struct ErgDpram_tag {
|
|
/*0000 */ uchar ToHyBuf[ERG_TO_HY_BUF_SIZE];
|
|
/*0E00 */ uchar ToPcBuf[ERG_TO_PC_BUF_SIZE];
|
|
|
|
/*1C00 */ uchar bSoftUart[SIZE_RSV_SOFT_UART];
|
|
/* size 0x1B0 */
|
|
|
|
/*1DB0 *//* tErrLogEntry */ uchar volatile ErrLogMsg[64];
|
|
/* size 64 bytes */
|
|
/*1DB0 ulong ulErrType; */
|
|
/*1DB4 ulong ulErrSubtype; */
|
|
/*1DB8 ulong ucTextSize; */
|
|
/*1DB9 ulong ucText[ERRLOG_TEXT_SIZE]; *//* ASCIIZ of len ucTextSize-1 */
|
|
/*1DF0 */
|
|
|
|
/*1DF0 */ word volatile ToHyChannel;
|
|
/*1DF2 */ word volatile ToHySize;
|
|
/*1DF4 */ uchar volatile ToHyFlag;
|
|
/* !=0: msg for Hy waiting */
|
|
/*1DF5 */ uchar volatile ToPcFlag;
|
|
/* !=0: msg for PC waiting */
|
|
/*1DF6 */ word volatile ToPcChannel;
|
|
/*1DF8 */ word volatile ToPcSize;
|
|
/*1DFA */ uchar bRes1DBA[0x1E00 - 0x1DFA];
|
|
/* 6 bytes */
|
|
|
|
/*1E00 */ uchar bRestOfEntryTbl[0x1F00 - 0x1E00];
|
|
/*1F00 */ ulong TrapTable[62];
|
|
/*1FF8 */ uchar bRes1FF8[0x1FFB - 0x1FF8];
|
|
/* low part of reset vetor */
|
|
/*1FFB */ uchar ToPcIntMetro;
|
|
/* notes:
|
|
* - metro has 32-bit boot ram - accessing
|
|
* ToPcInt and ToHyInt would be the same;
|
|
* so we moved ToPcInt to 1FFB.
|
|
* Because on the PC side both vars are
|
|
* readonly (reseting on int from E1 to PC),
|
|
* we can read both vars on both cards
|
|
* without destroying anything.
|
|
* - 1FFB is the high byte of the reset vector,
|
|
* so E1 side should NOT change this byte
|
|
* when writing!
|
|
*/
|
|
/*1FFC */ uchar volatile ToHyNoDpramErrLog;
|
|
/* note: ToHyNoDpramErrLog is used to inform
|
|
* boot loader, not to use DPRAM based
|
|
* ErrLog; when DOS driver is rewritten
|
|
* this becomes obsolete
|
|
*/
|
|
/*1FFD */ uchar bRes1FFD;
|
|
/*1FFE */ uchar ToPcInt;
|
|
/* E1_intclear; on CHAMP2: E1_intset */
|
|
/*1FFF */ uchar ToHyInt;
|
|
/* E1_intset; on CHAMP2: E1_intclear */
|
|
} tErgDpram;
|
|
|
|
/**********************************************/
|
|
/* PCI9050 controller local register offsets: */
|
|
/* copied from boarderg.c */
|
|
/**********************************************/
|
|
#define PCI9050_INTR_REG 0x4C /* Interrupt register */
|
|
#define PCI9050_USER_IO 0x51 /* User I/O register */
|
|
|
|
/* bitmask for PCI9050_INTR_REG: */
|
|
#define PCI9050_INTR_REG_EN1 0x01 /* 1= enable (def.), 0= disable */
|
|
#define PCI9050_INTR_REG_POL1 0x02 /* 1= active high (def.), 0= active low */
|
|
#define PCI9050_INTR_REG_STAT1 0x04 /* 1= intr. active, 0= intr. not active (def.) */
|
|
#define PCI9050_INTR_REG_ENPCI 0x40 /* 1= PCI interrupts enable (def.) */
|
|
|
|
/* bitmask for PCI9050_USER_IO: */
|
|
#define PCI9050_USER_IO_EN3 0x02 /* 1= disable , 0= enable (def.) */
|
|
#define PCI9050_USER_IO_DIR3 0x04 /* 1= output (def.), 0= input */
|
|
#define PCI9050_USER_IO_DAT3 0x08 /* 1= high (def.) , 0= low */
|
|
|
|
#define PCI9050_E1_RESET ( PCI9050_USER_IO_DIR3) /* 0x04 */
|
|
#define PCI9050_E1_RUN (PCI9050_USER_IO_DAT3|PCI9050_USER_IO_DIR3) /* 0x0C */
|