OpenCloudOS-Kernel/drivers/clk/clk_test.c

2582 lines
69 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Kunit test for clk rate management
*/
#include <linux/clk.h>
#include <linux/clk-provider.h>
/* Needed for clk_hw_get_clk() */
#include "clk.h"
#include <kunit/test.h>
#define DUMMY_CLOCK_INIT_RATE (42 * 1000 * 1000)
#define DUMMY_CLOCK_RATE_1 (142 * 1000 * 1000)
#define DUMMY_CLOCK_RATE_2 (242 * 1000 * 1000)
struct clk_dummy_context {
struct clk_hw hw;
unsigned long rate;
};
static unsigned long clk_dummy_recalc_rate(struct clk_hw *hw,
unsigned long parent_rate)
{
struct clk_dummy_context *ctx =
container_of(hw, struct clk_dummy_context, hw);
return ctx->rate;
}
static int clk_dummy_determine_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
/* Just return the same rate without modifying it */
return 0;
}
static int clk_dummy_maximize_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
/*
* If there's a maximum set, always run the clock at the maximum
* allowed.
*/
if (req->max_rate < ULONG_MAX)
req->rate = req->max_rate;
return 0;
}
static int clk_dummy_minimize_rate(struct clk_hw *hw,
struct clk_rate_request *req)
{
/*
* If there's a minimum set, always run the clock at the minimum
* allowed.
*/
if (req->min_rate > 0)
req->rate = req->min_rate;
return 0;
}
static int clk_dummy_set_rate(struct clk_hw *hw,
unsigned long rate,
unsigned long parent_rate)
{
struct clk_dummy_context *ctx =
container_of(hw, struct clk_dummy_context, hw);
ctx->rate = rate;
return 0;
}
static int clk_dummy_single_set_parent(struct clk_hw *hw, u8 index)
{
if (index >= clk_hw_get_num_parents(hw))
return -EINVAL;
return 0;
}
static u8 clk_dummy_single_get_parent(struct clk_hw *hw)
{
return 0;
}
static const struct clk_ops clk_dummy_rate_ops = {
.recalc_rate = clk_dummy_recalc_rate,
.determine_rate = clk_dummy_determine_rate,
.set_rate = clk_dummy_set_rate,
};
static const struct clk_ops clk_dummy_maximize_rate_ops = {
.recalc_rate = clk_dummy_recalc_rate,
.determine_rate = clk_dummy_maximize_rate,
.set_rate = clk_dummy_set_rate,
};
static const struct clk_ops clk_dummy_minimize_rate_ops = {
.recalc_rate = clk_dummy_recalc_rate,
.determine_rate = clk_dummy_minimize_rate,
.set_rate = clk_dummy_set_rate,
};
static const struct clk_ops clk_dummy_single_parent_ops = {
/*
* FIXME: Even though we should probably be able to use
* __clk_mux_determine_rate() here, if we use it and call
* clk_round_rate() or clk_set_rate() with a rate lower than
* what all the parents can provide, it will return -EINVAL.
*
* This is due to the fact that it has the undocumented
* behaviour to always pick up the closest rate higher than the
* requested rate. If we get something lower, it thus considers
* that it's not acceptable and will return an error.
*
* It's somewhat inconsistent and creates a weird threshold
* between rates above the parent rate which would be rounded to
* what the parent can provide, but rates below will simply
* return an error.
*/
.determine_rate = __clk_mux_determine_rate_closest,
.set_parent = clk_dummy_single_set_parent,
.get_parent = clk_dummy_single_get_parent,
};
struct clk_multiple_parent_ctx {
struct clk_dummy_context parents_ctx[2];
struct clk_hw hw;
u8 current_parent;
};
static int clk_multiple_parents_mux_set_parent(struct clk_hw *hw, u8 index)
{
struct clk_multiple_parent_ctx *ctx =
container_of(hw, struct clk_multiple_parent_ctx, hw);
if (index >= clk_hw_get_num_parents(hw))
return -EINVAL;
ctx->current_parent = index;
return 0;
}
static u8 clk_multiple_parents_mux_get_parent(struct clk_hw *hw)
{
struct clk_multiple_parent_ctx *ctx =
container_of(hw, struct clk_multiple_parent_ctx, hw);
return ctx->current_parent;
}
static const struct clk_ops clk_multiple_parents_mux_ops = {
.get_parent = clk_multiple_parents_mux_get_parent,
.set_parent = clk_multiple_parents_mux_set_parent,
.determine_rate = __clk_mux_determine_rate_closest,
};
static const struct clk_ops clk_multiple_parents_no_reparent_mux_ops = {
.determine_rate = clk_hw_determine_rate_no_reparent,
.get_parent = clk_multiple_parents_mux_get_parent,
.set_parent = clk_multiple_parents_mux_set_parent,
};
static int clk_test_init_with_ops(struct kunit *test, const struct clk_ops *ops)
{
struct clk_dummy_context *ctx;
struct clk_init_data init = { };
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
ctx->rate = DUMMY_CLOCK_INIT_RATE;
test->priv = ctx;
init.name = "test_dummy_rate";
init.ops = ops;
ctx->hw.init = &init;
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
static int clk_test_init(struct kunit *test)
{
return clk_test_init_with_ops(test, &clk_dummy_rate_ops);
}
static int clk_maximize_test_init(struct kunit *test)
{
return clk_test_init_with_ops(test, &clk_dummy_maximize_rate_ops);
}
static int clk_minimize_test_init(struct kunit *test)
{
return clk_test_init_with_ops(test, &clk_dummy_minimize_rate_ops);
}
static void clk_test_exit(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
}
/*
* Test that the actual rate matches what is returned by clk_get_rate()
*/
static void clk_test_get_rate(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, ctx->rate);
clk_put(clk);
}
/*
* Test that, after a call to clk_set_rate(), the rate returned by
* clk_get_rate() matches.
*
* This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
* modify the requested rate, which is our case in clk_dummy_rate_ops.
*/
static void clk_test_set_get_rate(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(clk);
}
/*
* Test that, after several calls to clk_set_rate(), the rate returned
* by clk_get_rate() matches the last one.
*
* This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
* modify the requested rate, which is our case in clk_dummy_rate_ops.
*/
static void clk_test_set_set_get_rate(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that clk_round_rate and clk_set_rate are consitent and will
* return the same frequency.
*/
static void clk_test_round_set_get_rate(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long set_rate;
long rounded_rate;
rounded_rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_GT(test, rounded_rate, 0);
KUNIT_EXPECT_EQ(test, rounded_rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1),
0);
set_rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, set_rate, 0);
KUNIT_EXPECT_EQ(test, rounded_rate, set_rate);
clk_put(clk);
}
static struct kunit_case clk_test_cases[] = {
KUNIT_CASE(clk_test_get_rate),
KUNIT_CASE(clk_test_set_get_rate),
KUNIT_CASE(clk_test_set_set_get_rate),
KUNIT_CASE(clk_test_round_set_get_rate),
{}
};
/*
* Test suite for a basic rate clock, without any parent.
*
* These tests exercise the rate API with simple scenarios
*/
static struct kunit_suite clk_test_suite = {
.name = "clk-test",
.init = clk_test_init,
.exit = clk_test_exit,
.test_cases = clk_test_cases,
};
static int clk_uncached_test_init(struct kunit *test)
{
struct clk_dummy_context *ctx;
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->rate = DUMMY_CLOCK_INIT_RATE;
ctx->hw.init = CLK_HW_INIT_NO_PARENT("test-clk",
&clk_dummy_rate_ops,
CLK_GET_RATE_NOCACHE);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
/*
* Test that for an uncached clock, the clock framework doesn't cache
* the rate and clk_get_rate() will return the underlying clock rate
* even if it changed.
*/
static void clk_test_uncached_get_rate(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE);
/* We change the rate behind the clock framework's back */
ctx->rate = DUMMY_CLOCK_RATE_1;
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(clk);
}
/*
* Test that for an uncached clock, clk_set_rate_range() will work
* properly if the rate hasn't changed.
*/
static void clk_test_uncached_set_range(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that for an uncached clock, clk_set_rate_range() will work
* properly if the rate has changed in hardware.
*
* In this case, it means that if the rate wasn't initially in the range
* we're trying to set, but got changed at some point into the range
* without the kernel knowing about it, its rate shouldn't be affected.
*/
static void clk_test_uncached_updated_rate_set_range(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
/* We change the rate behind the clock framework's back */
ctx->rate = DUMMY_CLOCK_RATE_1 + 1000;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
clk_put(clk);
}
static struct kunit_case clk_uncached_test_cases[] = {
KUNIT_CASE(clk_test_uncached_get_rate),
KUNIT_CASE(clk_test_uncached_set_range),
KUNIT_CASE(clk_test_uncached_updated_rate_set_range),
{}
};
/*
* Test suite for a basic, uncached, rate clock, without any parent.
*
* These tests exercise the rate API with simple scenarios
*/
static struct kunit_suite clk_uncached_test_suite = {
.name = "clk-uncached-test",
.init = clk_uncached_test_init,
.exit = clk_test_exit,
.test_cases = clk_uncached_test_cases,
};
static int
clk_multiple_parents_mux_test_init(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx;
const char *parents[2] = { "parent-0", "parent-1"};
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0",
&clk_dummy_rate_ops,
0);
ctx->parents_ctx[0].rate = DUMMY_CLOCK_RATE_1;
ret = clk_hw_register(NULL, &ctx->parents_ctx[0].hw);
if (ret)
return ret;
ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1",
&clk_dummy_rate_ops,
0);
ctx->parents_ctx[1].rate = DUMMY_CLOCK_RATE_2;
ret = clk_hw_register(NULL, &ctx->parents_ctx[1].hw);
if (ret)
return ret;
ctx->current_parent = 0;
ctx->hw.init = CLK_HW_INIT_PARENTS("test-mux", parents,
&clk_multiple_parents_mux_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
static void
clk_multiple_parents_mux_test_exit(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
clk_hw_unregister(&ctx->parents_ctx[0].hw);
clk_hw_unregister(&ctx->parents_ctx[1].hw);
}
/*
* Test that for a clock with multiple parents, clk_get_parent()
* actually returns the current one.
*/
static void
clk_test_multiple_parents_mux_get_parent(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent = clk_hw_get_clk(&ctx->parents_ctx[0].hw, NULL);
KUNIT_EXPECT_TRUE(test, clk_is_match(clk_get_parent(clk), parent));
clk_put(parent);
clk_put(clk);
}
/*
* Test that for a clock with a multiple parents, clk_has_parent()
* actually reports all of them as parents.
*/
static void
clk_test_multiple_parents_mux_has_parent(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
parent = clk_hw_get_clk(&ctx->parents_ctx[0].hw, NULL);
KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, parent));
clk_put(parent);
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, parent));
clk_put(parent);
clk_put(clk);
}
/*
* Test that for a clock with a multiple parents, if we set a range on
* that clock and the parent is changed, its rate after the reparenting
* is still within the range we asked for.
*
* FIXME: clk_set_parent() only does the reparenting but doesn't
* reevaluate whether the new clock rate is within its boundaries or
* not.
*/
static void
clk_test_multiple_parents_mux_set_range_set_parent_get_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent1, *parent2;
unsigned long rate;
int ret;
kunit_skip(test, "This needs to be fixed in the core.");
parent1 = clk_hw_get_clk(&ctx->parents_ctx[0].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent1);
KUNIT_ASSERT_TRUE(test, clk_is_match(clk_get_parent(clk), parent1));
parent2 = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent2);
ret = clk_set_rate(parent1, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate(parent2, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1 - 1000,
DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_parent(clk, parent2);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
clk_put(parent2);
clk_put(parent1);
clk_put(clk);
}
static struct kunit_case clk_multiple_parents_mux_test_cases[] = {
KUNIT_CASE(clk_test_multiple_parents_mux_get_parent),
KUNIT_CASE(clk_test_multiple_parents_mux_has_parent),
KUNIT_CASE(clk_test_multiple_parents_mux_set_range_set_parent_get_rate),
{}
};
/*
* Test suite for a basic mux clock with two parents, with
* CLK_SET_RATE_PARENT on the child.
*
* These tests exercise the consumer API and check that the state of the
* child and parents are sane and consistent.
*/
static struct kunit_suite
clk_multiple_parents_mux_test_suite = {
.name = "clk-multiple-parents-mux-test",
.init = clk_multiple_parents_mux_test_init,
.exit = clk_multiple_parents_mux_test_exit,
.test_cases = clk_multiple_parents_mux_test_cases,
};
static int
clk_orphan_transparent_multiple_parent_mux_test_init(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx;
const char *parents[2] = { "missing-parent", "proper-parent"};
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("proper-parent",
&clk_dummy_rate_ops,
0);
ctx->parents_ctx[1].rate = DUMMY_CLOCK_INIT_RATE;
ret = clk_hw_register(NULL, &ctx->parents_ctx[1].hw);
if (ret)
return ret;
ctx->hw.init = CLK_HW_INIT_PARENTS("test-orphan-mux", parents,
&clk_multiple_parents_mux_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
static void
clk_orphan_transparent_multiple_parent_mux_test_exit(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
clk_hw_unregister(&ctx->parents_ctx[1].hw);
}
/*
* Test that, for a mux whose current parent hasn't been registered yet and is
* thus orphan, clk_get_parent() will return NULL.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_get_parent(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
KUNIT_EXPECT_PTR_EQ(test, clk_get_parent(clk), NULL);
clk_put(clk);
}
/*
* Test that, for a mux whose current parent hasn't been registered yet,
* calling clk_set_parent() to a valid parent will properly update the
* mux parent and its orphan status.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent, *new_parent;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
new_parent = clk_get_parent(clk);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
KUNIT_EXPECT_TRUE(test, clk_is_match(parent, new_parent));
clk_put(parent);
clk_put(clk);
}
/*
* Test that, for a mux that started orphan but got switched to a valid
* parent, calling clk_drop_range() on the mux won't affect the parent
* rate.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent_drop_range(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
unsigned long parent_rate, new_parent_rate;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_drop_range(clk);
KUNIT_ASSERT_EQ(test, ret, 0);
new_parent_rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, new_parent_rate, 0);
KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate);
clk_put(parent);
clk_put(clk);
}
/*
* Test that, for a mux that started orphan but got switched to a valid
* parent, the rate of the mux and its new parent are consistent.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
unsigned long parent_rate, rate;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, parent_rate, rate);
clk_put(parent);
clk_put(clk);
}
/*
* Test that, for a mux that started orphan but got switched to a valid
* parent, calling clk_put() on the mux won't affect the parent rate.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent_put(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk *clk, *parent;
unsigned long parent_rate, new_parent_rate;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
clk = clk_hw_get_clk(&ctx->hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, clk);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
clk_put(clk);
new_parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, new_parent_rate, 0);
KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate);
clk_put(parent);
}
/*
* Test that, for a mux that started orphan but got switched to a valid
* parent, calling clk_set_rate_range() will affect the parent state if
* its rate is out of range.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
unsigned long rate;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(parent);
clk_put(clk);
}
/*
* Test that, for a mux that started orphan but got switched to a valid
* parent, calling clk_set_rate_range() won't affect the parent state if
* its rate is within range.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_untouched(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
unsigned long parent_rate, new_parent_rate;
int ret;
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk,
DUMMY_CLOCK_INIT_RATE - 1000,
DUMMY_CLOCK_INIT_RATE + 1000);
KUNIT_ASSERT_EQ(test, ret, 0);
new_parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, new_parent_rate, 0);
KUNIT_EXPECT_EQ(test, parent_rate, new_parent_rate);
clk_put(parent);
clk_put(clk);
}
/*
* Test that, for a mux whose current parent hasn't been registered yet,
* calling clk_set_rate_range() will succeed, and will be taken into
* account when rounding a rate.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_range_round_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
long rate;
int ret;
ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that, for a mux that started orphan, was assigned and rate and
* then got switched to a valid parent, its rate is eventually within
* range.
*
* FIXME: Even though we update the rate as part of clk_set_parent(), we
* don't evaluate whether that new rate is within range and needs to be
* adjusted.
*/
static void
clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
unsigned long rate;
int ret;
kunit_skip(test, "This needs to be fixed in the core.");
clk_hw_set_rate_range(hw, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, parent);
ret = clk_set_parent(clk, parent);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(parent);
clk_put(clk);
}
static struct kunit_case clk_orphan_transparent_multiple_parent_mux_test_cases[] = {
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_get_parent),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_drop_range),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_get_rate),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_put),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_modified),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_parent_set_range_untouched),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_range_round_rate),
KUNIT_CASE(clk_test_orphan_transparent_multiple_parent_mux_set_range_set_parent_get_rate),
{}
};
/*
* Test suite for a basic mux clock with two parents. The default parent
* isn't registered, only the second parent is. By default, the clock
* will thus be orphan.
*
* These tests exercise the behaviour of the consumer API when dealing
* with an orphan clock, and how we deal with the transition to a valid
* parent.
*/
static struct kunit_suite clk_orphan_transparent_multiple_parent_mux_test_suite = {
.name = "clk-orphan-transparent-multiple-parent-mux-test",
.init = clk_orphan_transparent_multiple_parent_mux_test_init,
.exit = clk_orphan_transparent_multiple_parent_mux_test_exit,
.test_cases = clk_orphan_transparent_multiple_parent_mux_test_cases,
};
struct clk_single_parent_ctx {
struct clk_dummy_context parent_ctx;
struct clk_hw hw;
};
static int clk_single_parent_mux_test_init(struct kunit *test)
{
struct clk_single_parent_ctx *ctx;
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->parent_ctx.rate = DUMMY_CLOCK_INIT_RATE;
ctx->parent_ctx.hw.init =
CLK_HW_INIT_NO_PARENT("parent-clk",
&clk_dummy_rate_ops,
0);
ret = clk_hw_register(NULL, &ctx->parent_ctx.hw);
if (ret)
return ret;
ctx->hw.init = CLK_HW_INIT("test-clk", "parent-clk",
&clk_dummy_single_parent_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
static void
clk_single_parent_mux_test_exit(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
clk_hw_unregister(&ctx->parent_ctx.hw);
}
/*
* Test that for a clock with a single parent, clk_get_parent() actually
* returns the parent.
*/
static void
clk_test_single_parent_mux_get_parent(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent = clk_hw_get_clk(&ctx->parent_ctx.hw, NULL);
KUNIT_EXPECT_TRUE(test, clk_is_match(clk_get_parent(clk), parent));
clk_put(parent);
clk_put(clk);
}
/*
* Test that for a clock with a single parent, clk_has_parent() actually
* reports it as a parent.
*/
static void
clk_test_single_parent_mux_has_parent(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent = clk_hw_get_clk(&ctx->parent_ctx.hw, NULL);
KUNIT_EXPECT_TRUE(test, clk_has_parent(clk, parent));
clk_put(parent);
clk_put(clk);
}
/*
* Test that for a clock that can't modify its rate and with a single
* parent, if we set disjoints range on the parent and then the child,
* the second will return an error.
*
* FIXME: clk_set_rate_range() only considers the current clock when
* evaluating whether ranges are disjoints and not the upstream clocks
* ranges.
*/
static void
clk_test_single_parent_mux_set_range_disjoint_child_last(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
int ret;
kunit_skip(test, "This needs to be fixed in the core.");
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
ret = clk_set_rate_range(parent, 1000, 2000);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk, 3000, 4000);
KUNIT_EXPECT_LT(test, ret, 0);
clk_put(clk);
}
/*
* Test that for a clock that can't modify its rate and with a single
* parent, if we set disjoints range on the child and then the parent,
* the second will return an error.
*
* FIXME: clk_set_rate_range() only considers the current clock when
* evaluating whether ranges are disjoints and not the downstream clocks
* ranges.
*/
static void
clk_test_single_parent_mux_set_range_disjoint_parent_last(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
int ret;
kunit_skip(test, "This needs to be fixed in the core.");
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
ret = clk_set_rate_range(clk, 1000, 2000);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(parent, 3000, 4000);
KUNIT_EXPECT_LT(test, ret, 0);
clk_put(clk);
}
/*
* Test that for a clock that can't modify its rate and with a single
* parent, if we set a range on the parent and then call
* clk_round_rate(), the boundaries of the parent are taken into
* account.
*/
static void
clk_test_single_parent_mux_set_range_round_rate_parent_only(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
long rate;
int ret;
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that for a clock that can't modify its rate and with a single
* parent, if we set a range on the parent and a more restrictive one on
* the child, and then call clk_round_rate(), the boundaries of the
* two clocks are taken into account.
*/
static void
clk_test_single_parent_mux_set_range_round_rate_child_smaller(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
long rate;
int ret;
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1 + 1000, DUMMY_CLOCK_RATE_2 - 1000);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
clk_put(clk);
}
/*
* Test that for a clock that can't modify its rate and with a single
* parent, if we set a range on the child and a more restrictive one on
* the parent, and then call clk_round_rate(), the boundaries of the
* two clocks are taken into account.
*/
static void
clk_test_single_parent_mux_set_range_round_rate_parent_smaller(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *parent;
long rate;
int ret;
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
ret = clk_set_rate_range(parent, DUMMY_CLOCK_RATE_1 + 1000, DUMMY_CLOCK_RATE_2 - 1000);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = clk_set_rate_range(clk, DUMMY_CLOCK_RATE_1, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
clk_put(clk);
}
static struct kunit_case clk_single_parent_mux_test_cases[] = {
KUNIT_CASE(clk_test_single_parent_mux_get_parent),
KUNIT_CASE(clk_test_single_parent_mux_has_parent),
KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_child_last),
KUNIT_CASE(clk_test_single_parent_mux_set_range_disjoint_parent_last),
KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_child_smaller),
KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_parent_only),
KUNIT_CASE(clk_test_single_parent_mux_set_range_round_rate_parent_smaller),
{}
};
/*
* Test suite for a basic mux clock with one parent, with
* CLK_SET_RATE_PARENT on the child.
*
* These tests exercise the consumer API and check that the state of the
* child and parent are sane and consistent.
*/
static struct kunit_suite
clk_single_parent_mux_test_suite = {
.name = "clk-single-parent-mux-test",
.init = clk_single_parent_mux_test_init,
.exit = clk_single_parent_mux_test_exit,
.test_cases = clk_single_parent_mux_test_cases,
};
static int clk_orphan_transparent_single_parent_mux_test_init(struct kunit *test)
{
struct clk_single_parent_ctx *ctx;
struct clk_init_data init = { };
const char * const parents[] = { "orphan_parent" };
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
init.name = "test_orphan_dummy_parent";
init.ops = &clk_dummy_single_parent_ops;
init.parent_names = parents;
init.num_parents = ARRAY_SIZE(parents);
init.flags = CLK_SET_RATE_PARENT;
ctx->hw.init = &init;
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
memset(&init, 0, sizeof(init));
init.name = "orphan_parent";
init.ops = &clk_dummy_rate_ops;
ctx->parent_ctx.hw.init = &init;
ctx->parent_ctx.rate = DUMMY_CLOCK_INIT_RATE;
ret = clk_hw_register(NULL, &ctx->parent_ctx.hw);
if (ret)
return ret;
return 0;
}
/*
* Test that a mux-only clock, with an initial rate within a range,
* will still have the same rate after the range has been enforced.
*
* See:
* https://lore.kernel.org/linux-clk/7720158d-10a7-a17b-73a4-a8615c9c6d5c@collabora.com/
*/
static void clk_test_orphan_transparent_parent_mux_set_range(struct kunit *test)
{
struct clk_single_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate, new_rate;
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
ctx->parent_ctx.rate - 1000,
ctx->parent_ctx.rate + 1000),
0);
new_rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, new_rate, 0);
KUNIT_EXPECT_EQ(test, rate, new_rate);
clk_put(clk);
}
static struct kunit_case clk_orphan_transparent_single_parent_mux_test_cases[] = {
KUNIT_CASE(clk_test_orphan_transparent_parent_mux_set_range),
{}
};
/*
* Test suite for a basic mux clock with one parent. The parent is
* registered after its child. The clock will thus be an orphan when
* registered, but will no longer be when the tests run.
*
* These tests make sure a clock that used to be orphan has a sane,
* consistent, behaviour.
*/
static struct kunit_suite clk_orphan_transparent_single_parent_test_suite = {
.name = "clk-orphan-transparent-single-parent-test",
.init = clk_orphan_transparent_single_parent_mux_test_init,
.exit = clk_single_parent_mux_test_exit,
.test_cases = clk_orphan_transparent_single_parent_mux_test_cases,
};
struct clk_single_parent_two_lvl_ctx {
struct clk_dummy_context parent_parent_ctx;
struct clk_dummy_context parent_ctx;
struct clk_hw hw;
};
static int
clk_orphan_two_level_root_last_test_init(struct kunit *test)
{
struct clk_single_parent_two_lvl_ctx *ctx;
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->parent_ctx.hw.init =
CLK_HW_INIT("intermediate-parent",
"root-parent",
&clk_dummy_single_parent_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register(NULL, &ctx->parent_ctx.hw);
if (ret)
return ret;
ctx->hw.init =
CLK_HW_INIT("test-clk", "intermediate-parent",
&clk_dummy_single_parent_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
ctx->parent_parent_ctx.rate = DUMMY_CLOCK_INIT_RATE;
ctx->parent_parent_ctx.hw.init =
CLK_HW_INIT_NO_PARENT("root-parent",
&clk_dummy_rate_ops,
0);
ret = clk_hw_register(NULL, &ctx->parent_parent_ctx.hw);
if (ret)
return ret;
return 0;
}
static void
clk_orphan_two_level_root_last_test_exit(struct kunit *test)
{
struct clk_single_parent_two_lvl_ctx *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
clk_hw_unregister(&ctx->parent_ctx.hw);
clk_hw_unregister(&ctx->parent_parent_ctx.hw);
}
/*
* Test that, for a clock whose parent used to be orphan, clk_get_rate()
* will return the proper rate.
*/
static void
clk_orphan_two_level_root_last_test_get_rate(struct kunit *test)
{
struct clk_single_parent_two_lvl_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
rate = clk_get_rate(clk);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE);
clk_put(clk);
}
/*
* Test that, for a clock whose parent used to be orphan,
* clk_set_rate_range() won't affect its rate if it is already within
* range.
*
* See (for Exynos 4210):
* https://lore.kernel.org/linux-clk/366a0232-bb4a-c357-6aa8-636e398e05eb@samsung.com/
*/
static void
clk_orphan_two_level_root_last_test_set_range(struct kunit *test)
{
struct clk_single_parent_two_lvl_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
int ret;
ret = clk_set_rate_range(clk,
DUMMY_CLOCK_INIT_RATE - 1000,
DUMMY_CLOCK_INIT_RATE + 1000);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_INIT_RATE);
clk_put(clk);
}
static struct kunit_case
clk_orphan_two_level_root_last_test_cases[] = {
KUNIT_CASE(clk_orphan_two_level_root_last_test_get_rate),
KUNIT_CASE(clk_orphan_two_level_root_last_test_set_range),
{}
};
/*
* Test suite for a basic, transparent, clock with a parent that is also
* such a clock. The parent's parent is registered last, while the
* parent and its child are registered in that order. The intermediate
* and leaf clocks will thus be orphan when registered, but the leaf
* clock itself will always have its parent and will never be
* reparented. Indeed, it's only orphan because its parent is.
*
* These tests exercise the behaviour of the consumer API when dealing
* with an orphan clock, and how we deal with the transition to a valid
* parent.
*/
static struct kunit_suite
clk_orphan_two_level_root_last_test_suite = {
.name = "clk-orphan-two-level-root-last-test",
.init = clk_orphan_two_level_root_last_test_init,
.exit = clk_orphan_two_level_root_last_test_exit,
.test_cases = clk_orphan_two_level_root_last_test_cases,
};
/*
* Test that clk_set_rate_range won't return an error for a valid range
* and that it will make sure the rate of the clock is within the
* boundaries.
*/
static void clk_range_test_set_range(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that calling clk_set_rate_range with a minimum rate higher than
* the maximum rate returns an error.
*/
static void clk_range_test_set_range_invalid(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
KUNIT_EXPECT_LT(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1 + 1000,
DUMMY_CLOCK_RATE_1),
0);
clk_put(clk);
}
/*
* Test that users can't set multiple, disjoints, range that would be
* impossible to meet.
*/
static void clk_range_test_multiple_disjoints_range(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *user1, *user2;
user1 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
user2 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user1, 1000, 2000),
0);
KUNIT_EXPECT_LT(test,
clk_set_rate_range(user2, 3000, 4000),
0);
clk_put(user2);
clk_put(user1);
}
/*
* Test that if our clock has some boundaries and we try to round a rate
* lower than the minimum, the returned rate will be within range.
*/
static void clk_range_test_set_range_round_rate_lower(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that if our clock has some boundaries and we try to set a rate
* higher than the maximum, the new rate will be within range.
*/
static void clk_range_test_set_range_set_rate_lower(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that if our clock has some boundaries and we try to round and
* set a rate lower than the minimum, the rate returned by
* clk_round_rate() will be consistent with the new rate set by
* clk_set_rate().
*/
static void clk_range_test_set_range_set_round_rate_consistent_lower(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
long rounded;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rounded = clk_round_rate(clk, DUMMY_CLOCK_RATE_1 - 1000);
KUNIT_ASSERT_GT(test, rounded, 0);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
0);
KUNIT_EXPECT_EQ(test, rounded, clk_get_rate(clk));
clk_put(clk);
}
/*
* Test that if our clock has some boundaries and we try to round a rate
* higher than the maximum, the returned rate will be within range.
*/
static void clk_range_test_set_range_round_rate_higher(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that if our clock has some boundaries and we try to set a rate
* higher than the maximum, the new rate will be within range.
*/
static void clk_range_test_set_range_set_rate_higher(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_GE(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_LE(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that if our clock has some boundaries and we try to round and
* set a rate higher than the maximum, the rate returned by
* clk_round_rate() will be consistent with the new rate set by
* clk_set_rate().
*/
static void clk_range_test_set_range_set_round_rate_consistent_higher(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
long rounded;
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rounded = clk_round_rate(clk, DUMMY_CLOCK_RATE_2 + 1000);
KUNIT_ASSERT_GT(test, rounded, 0);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
KUNIT_EXPECT_EQ(test, rounded, clk_get_rate(clk));
clk_put(clk);
}
/*
* Test that if our clock has a rate lower than the minimum set by a
* call to clk_set_rate_range(), the rate will be raised to match the
* new minimum.
*
* This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
* modify the requested rate, which is our case in clk_dummy_rate_ops.
*/
static void clk_range_test_set_range_get_rate_raised(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(clk);
}
/*
* Test that if our clock has a rate higher than the maximum set by a
* call to clk_set_rate_range(), the rate will be lowered to match the
* new maximum.
*
* This assumes that clk_ops.determine_rate or clk_ops.round_rate won't
* modify the requested rate, which is our case in clk_dummy_rate_ops.
*/
static void clk_range_test_set_range_get_rate_lowered(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
static struct kunit_case clk_range_test_cases[] = {
KUNIT_CASE(clk_range_test_set_range),
KUNIT_CASE(clk_range_test_set_range_invalid),
KUNIT_CASE(clk_range_test_multiple_disjoints_range),
KUNIT_CASE(clk_range_test_set_range_round_rate_lower),
KUNIT_CASE(clk_range_test_set_range_set_rate_lower),
KUNIT_CASE(clk_range_test_set_range_set_round_rate_consistent_lower),
KUNIT_CASE(clk_range_test_set_range_round_rate_higher),
KUNIT_CASE(clk_range_test_set_range_set_rate_higher),
KUNIT_CASE(clk_range_test_set_range_set_round_rate_consistent_higher),
KUNIT_CASE(clk_range_test_set_range_get_rate_raised),
KUNIT_CASE(clk_range_test_set_range_get_rate_lowered),
{}
};
/*
* Test suite for a basic rate clock, without any parent.
*
* These tests exercise the rate range API: clk_set_rate_range(),
* clk_set_min_rate(), clk_set_max_rate(), clk_drop_range().
*/
static struct kunit_suite clk_range_test_suite = {
.name = "clk-range-test",
.init = clk_test_init,
.exit = clk_test_exit,
.test_cases = clk_range_test_cases,
};
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), the core will reevaluate whether a new rate is
* needed each and every time.
*
* With clk_dummy_maximize_rate_ops, this means that the rate will
* trail along the maximum as it evolves.
*/
static void clk_range_test_set_range_rate_maximized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2 - 1000),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2 - 1000);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(clk);
}
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), across multiple users, the core will reevaluate
* whether a new rate is needed each and every time.
*
* With clk_dummy_maximize_rate_ops, this means that the rate will
* trail along the maximum as it evolves.
*/
static void clk_range_test_multiple_set_range_rate_maximized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *user1, *user2;
unsigned long rate;
user1 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
user2 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user1,
0,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user2,
0,
DUMMY_CLOCK_RATE_1),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test,
clk_drop_range(user2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(user2);
clk_put(user1);
clk_put(clk);
}
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), across multiple users, the core will reevaluate
* whether a new rate is needed, including when a user drop its clock.
*
* With clk_dummy_maximize_rate_ops, this means that the rate will
* trail along the maximum as it evolves.
*/
static void clk_range_test_multiple_set_range_rate_put_maximized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *user1, *user2;
unsigned long rate;
user1 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
user2 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_2 + 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user1,
0,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user2,
0,
DUMMY_CLOCK_RATE_1),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(user2);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(user1);
clk_put(clk);
}
static struct kunit_case clk_range_maximize_test_cases[] = {
KUNIT_CASE(clk_range_test_set_range_rate_maximized),
KUNIT_CASE(clk_range_test_multiple_set_range_rate_maximized),
KUNIT_CASE(clk_range_test_multiple_set_range_rate_put_maximized),
{}
};
/*
* Test suite for a basic rate clock, without any parent.
*
* These tests exercise the rate range API: clk_set_rate_range(),
* clk_set_min_rate(), clk_set_max_rate(), clk_drop_range(), with a
* driver that will always try to run at the highest possible rate.
*/
static struct kunit_suite clk_range_maximize_test_suite = {
.name = "clk-range-maximize-test",
.init = clk_maximize_test_init,
.exit = clk_test_exit,
.test_cases = clk_range_maximize_test_cases,
};
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), the core will reevaluate whether a new rate is
* needed each and every time.
*
* With clk_dummy_minimize_rate_ops, this means that the rate will
* trail along the minimum as it evolves.
*/
static void clk_range_test_set_range_rate_minimized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
unsigned long rate;
KUNIT_ASSERT_EQ(test,
clk_set_rate(clk, DUMMY_CLOCK_RATE_1 - 1000),
0);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1 + 1000,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1 + 1000);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(clk,
DUMMY_CLOCK_RATE_1,
DUMMY_CLOCK_RATE_2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(clk);
}
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), across multiple users, the core will reevaluate
* whether a new rate is needed each and every time.
*
* With clk_dummy_minimize_rate_ops, this means that the rate will
* trail along the minimum as it evolves.
*/
static void clk_range_test_multiple_set_range_rate_minimized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *user1, *user2;
unsigned long rate;
user1 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
user2 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user1,
DUMMY_CLOCK_RATE_1,
ULONG_MAX),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user2,
DUMMY_CLOCK_RATE_2,
ULONG_MAX),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
KUNIT_ASSERT_EQ(test,
clk_drop_range(user2),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(user2);
clk_put(user1);
clk_put(clk);
}
/*
* Test that if we have several subsequent calls to
* clk_set_rate_range(), across multiple users, the core will reevaluate
* whether a new rate is needed, including when a user drop its clock.
*
* With clk_dummy_minimize_rate_ops, this means that the rate will
* trail along the minimum as it evolves.
*/
static void clk_range_test_multiple_set_range_rate_put_minimized(struct kunit *test)
{
struct clk_dummy_context *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *user1, *user2;
unsigned long rate;
user1 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user1);
user2 = clk_hw_get_clk(hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, user2);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user1,
DUMMY_CLOCK_RATE_1,
ULONG_MAX),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
KUNIT_ASSERT_EQ(test,
clk_set_rate_range(user2,
DUMMY_CLOCK_RATE_2,
ULONG_MAX),
0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_2);
clk_put(user2);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_put(user1);
clk_put(clk);
}
static struct kunit_case clk_range_minimize_test_cases[] = {
KUNIT_CASE(clk_range_test_set_range_rate_minimized),
KUNIT_CASE(clk_range_test_multiple_set_range_rate_minimized),
KUNIT_CASE(clk_range_test_multiple_set_range_rate_put_minimized),
{}
};
/*
* Test suite for a basic rate clock, without any parent.
*
* These tests exercise the rate range API: clk_set_rate_range(),
* clk_set_min_rate(), clk_set_max_rate(), clk_drop_range(), with a
* driver that will always try to run at the lowest possible rate.
*/
static struct kunit_suite clk_range_minimize_test_suite = {
.name = "clk-range-minimize-test",
.init = clk_minimize_test_init,
.exit = clk_test_exit,
.test_cases = clk_range_minimize_test_cases,
};
struct clk_leaf_mux_ctx {
struct clk_multiple_parent_ctx mux_ctx;
struct clk_hw hw;
};
static int
clk_leaf_mux_set_rate_parent_test_init(struct kunit *test)
{
struct clk_leaf_mux_ctx *ctx;
const char *top_parents[2] = { "parent-0", "parent-1" };
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->mux_ctx.parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0",
&clk_dummy_rate_ops,
0);
ctx->mux_ctx.parents_ctx[0].rate = DUMMY_CLOCK_RATE_1;
ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[0].hw);
if (ret)
return ret;
ctx->mux_ctx.parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1",
&clk_dummy_rate_ops,
0);
ctx->mux_ctx.parents_ctx[1].rate = DUMMY_CLOCK_RATE_2;
ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[1].hw);
if (ret)
return ret;
ctx->mux_ctx.current_parent = 0;
ctx->mux_ctx.hw.init = CLK_HW_INIT_PARENTS("test-mux", top_parents,
&clk_multiple_parents_mux_ops,
0);
ret = clk_hw_register(NULL, &ctx->mux_ctx.hw);
if (ret)
return ret;
ctx->hw.init = CLK_HW_INIT_HW("test-clock", &ctx->mux_ctx.hw,
&clk_dummy_single_parent_ops,
CLK_SET_RATE_PARENT);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
static void clk_leaf_mux_set_rate_parent_test_exit(struct kunit *test)
{
struct clk_leaf_mux_ctx *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
clk_hw_unregister(&ctx->mux_ctx.hw);
clk_hw_unregister(&ctx->mux_ctx.parents_ctx[0].hw);
clk_hw_unregister(&ctx->mux_ctx.parents_ctx[1].hw);
}
/*
* Test that, for a clock that will forward any rate request to its
* parent, the rate request structure returned by __clk_determine_rate
* is sane and will be what we expect.
*/
static void clk_leaf_mux_set_rate_parent_determine_rate(struct kunit *test)
{
struct clk_leaf_mux_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk_rate_request req;
unsigned long rate;
int ret;
rate = clk_get_rate(clk);
KUNIT_ASSERT_EQ(test, rate, DUMMY_CLOCK_RATE_1);
clk_hw_init_rate_request(hw, &req, DUMMY_CLOCK_RATE_2);
ret = __clk_determine_rate(hw, &req);
KUNIT_ASSERT_EQ(test, ret, 0);
KUNIT_EXPECT_EQ(test, req.rate, DUMMY_CLOCK_RATE_2);
KUNIT_EXPECT_EQ(test, req.best_parent_rate, DUMMY_CLOCK_RATE_2);
KUNIT_EXPECT_PTR_EQ(test, req.best_parent_hw, &ctx->mux_ctx.hw);
clk_put(clk);
}
static struct kunit_case clk_leaf_mux_set_rate_parent_test_cases[] = {
KUNIT_CASE(clk_leaf_mux_set_rate_parent_determine_rate),
{}
};
/*
* Test suite for a clock whose parent is a mux with multiple parents.
* The leaf clock has CLK_SET_RATE_PARENT, and will forward rate
* requests to the mux, which will then select which parent is the best
* fit for a given rate.
*
* These tests exercise the behaviour of muxes, and the proper selection
* of parents.
*/
static struct kunit_suite clk_leaf_mux_set_rate_parent_test_suite = {
.name = "clk-leaf-mux-set-rate-parent",
.init = clk_leaf_mux_set_rate_parent_test_init,
.exit = clk_leaf_mux_set_rate_parent_test_exit,
.test_cases = clk_leaf_mux_set_rate_parent_test_cases,
};
struct clk_mux_notifier_rate_change {
bool done;
unsigned long old_rate;
unsigned long new_rate;
wait_queue_head_t wq;
};
struct clk_mux_notifier_ctx {
struct clk_multiple_parent_ctx mux_ctx;
struct clk *clk;
struct notifier_block clk_nb;
struct clk_mux_notifier_rate_change pre_rate_change;
struct clk_mux_notifier_rate_change post_rate_change;
};
#define NOTIFIER_TIMEOUT_MS 100
static int clk_mux_notifier_callback(struct notifier_block *nb,
unsigned long action, void *data)
{
struct clk_notifier_data *clk_data = data;
struct clk_mux_notifier_ctx *ctx = container_of(nb,
struct clk_mux_notifier_ctx,
clk_nb);
if (action & PRE_RATE_CHANGE) {
ctx->pre_rate_change.old_rate = clk_data->old_rate;
ctx->pre_rate_change.new_rate = clk_data->new_rate;
ctx->pre_rate_change.done = true;
wake_up_interruptible(&ctx->pre_rate_change.wq);
}
if (action & POST_RATE_CHANGE) {
ctx->post_rate_change.old_rate = clk_data->old_rate;
ctx->post_rate_change.new_rate = clk_data->new_rate;
ctx->post_rate_change.done = true;
wake_up_interruptible(&ctx->post_rate_change.wq);
}
return 0;
}
static int clk_mux_notifier_test_init(struct kunit *test)
{
struct clk_mux_notifier_ctx *ctx;
const char *top_parents[2] = { "parent-0", "parent-1" };
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->clk_nb.notifier_call = clk_mux_notifier_callback;
init_waitqueue_head(&ctx->pre_rate_change.wq);
init_waitqueue_head(&ctx->post_rate_change.wq);
ctx->mux_ctx.parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0",
&clk_dummy_rate_ops,
0);
ctx->mux_ctx.parents_ctx[0].rate = DUMMY_CLOCK_RATE_1;
ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[0].hw);
if (ret)
return ret;
ctx->mux_ctx.parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1",
&clk_dummy_rate_ops,
0);
ctx->mux_ctx.parents_ctx[1].rate = DUMMY_CLOCK_RATE_2;
ret = clk_hw_register(NULL, &ctx->mux_ctx.parents_ctx[1].hw);
if (ret)
return ret;
ctx->mux_ctx.current_parent = 0;
ctx->mux_ctx.hw.init = CLK_HW_INIT_PARENTS("test-mux", top_parents,
&clk_multiple_parents_mux_ops,
0);
ret = clk_hw_register(NULL, &ctx->mux_ctx.hw);
if (ret)
return ret;
ctx->clk = clk_hw_get_clk(&ctx->mux_ctx.hw, NULL);
ret = clk_notifier_register(ctx->clk, &ctx->clk_nb);
if (ret)
return ret;
return 0;
}
static void clk_mux_notifier_test_exit(struct kunit *test)
{
struct clk_mux_notifier_ctx *ctx = test->priv;
struct clk *clk = ctx->clk;
clk_notifier_unregister(clk, &ctx->clk_nb);
clk_put(clk);
clk_hw_unregister(&ctx->mux_ctx.hw);
clk_hw_unregister(&ctx->mux_ctx.parents_ctx[0].hw);
clk_hw_unregister(&ctx->mux_ctx.parents_ctx[1].hw);
}
/*
* Test that if the we have a notifier registered on a mux, the core
* will notify us when we switch to another parent, and with the proper
* old and new rates.
*/
static void clk_mux_notifier_set_parent_test(struct kunit *test)
{
struct clk_mux_notifier_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->mux_ctx.hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *new_parent = clk_hw_get_clk(&ctx->mux_ctx.parents_ctx[1].hw, NULL);
int ret;
ret = clk_set_parent(clk, new_parent);
KUNIT_ASSERT_EQ(test, ret, 0);
ret = wait_event_interruptible_timeout(ctx->pre_rate_change.wq,
ctx->pre_rate_change.done,
msecs_to_jiffies(NOTIFIER_TIMEOUT_MS));
KUNIT_ASSERT_GT(test, ret, 0);
KUNIT_EXPECT_EQ(test, ctx->pre_rate_change.old_rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_EQ(test, ctx->pre_rate_change.new_rate, DUMMY_CLOCK_RATE_2);
ret = wait_event_interruptible_timeout(ctx->post_rate_change.wq,
ctx->post_rate_change.done,
msecs_to_jiffies(NOTIFIER_TIMEOUT_MS));
KUNIT_ASSERT_GT(test, ret, 0);
KUNIT_EXPECT_EQ(test, ctx->post_rate_change.old_rate, DUMMY_CLOCK_RATE_1);
KUNIT_EXPECT_EQ(test, ctx->post_rate_change.new_rate, DUMMY_CLOCK_RATE_2);
clk_put(new_parent);
clk_put(clk);
}
static struct kunit_case clk_mux_notifier_test_cases[] = {
KUNIT_CASE(clk_mux_notifier_set_parent_test),
{}
};
/*
* Test suite for a mux with multiple parents, and a notifier registered
* on the mux.
*
* These tests exercise the behaviour of notifiers.
*/
static struct kunit_suite clk_mux_notifier_test_suite = {
.name = "clk-mux-notifier",
.init = clk_mux_notifier_test_init,
.exit = clk_mux_notifier_test_exit,
.test_cases = clk_mux_notifier_test_cases,
};
static int
clk_mux_no_reparent_test_init(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx;
const char *parents[2] = { "parent-0", "parent-1"};
int ret;
ctx = kunit_kzalloc(test, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
test->priv = ctx;
ctx->parents_ctx[0].hw.init = CLK_HW_INIT_NO_PARENT("parent-0",
&clk_dummy_rate_ops,
0);
ctx->parents_ctx[0].rate = DUMMY_CLOCK_RATE_1;
ret = clk_hw_register(NULL, &ctx->parents_ctx[0].hw);
if (ret)
return ret;
ctx->parents_ctx[1].hw.init = CLK_HW_INIT_NO_PARENT("parent-1",
&clk_dummy_rate_ops,
0);
ctx->parents_ctx[1].rate = DUMMY_CLOCK_RATE_2;
ret = clk_hw_register(NULL, &ctx->parents_ctx[1].hw);
if (ret)
return ret;
ctx->current_parent = 0;
ctx->hw.init = CLK_HW_INIT_PARENTS("test-mux", parents,
&clk_multiple_parents_no_reparent_mux_ops,
0);
ret = clk_hw_register(NULL, &ctx->hw);
if (ret)
return ret;
return 0;
}
static void
clk_mux_no_reparent_test_exit(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
clk_hw_unregister(&ctx->hw);
clk_hw_unregister(&ctx->parents_ctx[0].hw);
clk_hw_unregister(&ctx->parents_ctx[1].hw);
}
/*
* Test that if the we have a mux that cannot change parent and we call
* clk_round_rate() on it with a rate that should cause it to change
* parent, it won't.
*/
static void clk_mux_no_reparent_round_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *other_parent, *parent;
unsigned long other_parent_rate;
unsigned long parent_rate;
long rounded_rate;
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
other_parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, other_parent);
KUNIT_ASSERT_FALSE(test, clk_is_match(parent, other_parent));
other_parent_rate = clk_get_rate(other_parent);
KUNIT_ASSERT_GT(test, other_parent_rate, 0);
clk_put(other_parent);
rounded_rate = clk_round_rate(clk, other_parent_rate);
KUNIT_ASSERT_GT(test, rounded_rate, 0);
KUNIT_EXPECT_EQ(test, rounded_rate, parent_rate);
clk_put(clk);
}
/*
* Test that if the we have a mux that cannot change parent and we call
* clk_set_rate() on it with a rate that should cause it to change
* parent, it won't.
*/
static void clk_mux_no_reparent_set_rate(struct kunit *test)
{
struct clk_multiple_parent_ctx *ctx = test->priv;
struct clk_hw *hw = &ctx->hw;
struct clk *clk = clk_hw_get_clk(hw, NULL);
struct clk *other_parent, *parent;
unsigned long other_parent_rate;
unsigned long parent_rate;
unsigned long rate;
int ret;
parent = clk_get_parent(clk);
KUNIT_ASSERT_PTR_NE(test, parent, NULL);
parent_rate = clk_get_rate(parent);
KUNIT_ASSERT_GT(test, parent_rate, 0);
other_parent = clk_hw_get_clk(&ctx->parents_ctx[1].hw, NULL);
KUNIT_ASSERT_NOT_ERR_OR_NULL(test, other_parent);
KUNIT_ASSERT_FALSE(test, clk_is_match(parent, other_parent));
other_parent_rate = clk_get_rate(other_parent);
KUNIT_ASSERT_GT(test, other_parent_rate, 0);
clk_put(other_parent);
ret = clk_set_rate(clk, other_parent_rate);
KUNIT_ASSERT_EQ(test, ret, 0);
rate = clk_get_rate(clk);
KUNIT_ASSERT_GT(test, rate, 0);
KUNIT_EXPECT_EQ(test, rate, parent_rate);
clk_put(clk);
}
static struct kunit_case clk_mux_no_reparent_test_cases[] = {
KUNIT_CASE(clk_mux_no_reparent_round_rate),
KUNIT_CASE(clk_mux_no_reparent_set_rate),
{}
};
/*
* Test suite for a clock mux that isn't allowed to change parent, using
* the clk_hw_determine_rate_no_reparent() helper.
*
* These tests exercise that helper, and the proper selection of
* rates and parents.
*/
static struct kunit_suite clk_mux_no_reparent_test_suite = {
.name = "clk-mux-no-reparent",
.init = clk_mux_no_reparent_test_init,
.exit = clk_mux_no_reparent_test_exit,
.test_cases = clk_mux_no_reparent_test_cases,
};
kunit_test_suites(
&clk_leaf_mux_set_rate_parent_test_suite,
&clk_test_suite,
&clk_multiple_parents_mux_test_suite,
&clk_mux_no_reparent_test_suite,
&clk_mux_notifier_test_suite,
&clk_orphan_transparent_multiple_parent_mux_test_suite,
&clk_orphan_transparent_single_parent_test_suite,
&clk_orphan_two_level_root_last_test_suite,
&clk_range_test_suite,
&clk_range_maximize_test_suite,
&clk_range_minimize_test_suite,
&clk_single_parent_mux_test_suite,
&clk_uncached_test_suite
);
MODULE_LICENSE("GPL v2");