UbiquitousOS
/
OpenCloudOS-Kernel
mirror of https://gitee.com/OpenCloudOS/OpenCloudOS-Kernel.git
11
0
Fork 0
Code Issues Projects Releases Wiki Activity
OpenCloudOS-Kernel/drivers/tty/serial/atmel_serial.c

2654 lines
66 KiB
C
Raw Blame History

/*
* Driver for Atmel AT91 / AT32 Serial ports
* Copyright (C) 2003 Rick Bronson
*
* Based on drivers/char/serial_sa1100.c, by Deep Blue Solutions Ltd.
* Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
*
* DMA support added by Chip Coldwell.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*/
#include <linux/module.h>
#include <linux/tty.h>
#include <linux/ioport.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/serial.h>
#include <linux/clk.h>
#include <linux/console.h>
#include <linux/sysrq.h>
#include <linux/tty_flip.h>
#include <linux/platform_device.h>
#include <linux/of.h>
#include <linux/of_device.h>
#include <linux/of_gpio.h>
#include <linux/dma-mapping.h>
#include <linux/atmel_pdc.h>
#include <linux/atmel_serial.h>
#include <linux/uaccess.h>
#include <linux/platform_data/atmel.h>
#include <linux/timer.h>
#include <linux/gpio.h>
#include <linux/gpio/consumer.h>
#include <linux/err.h>
#include <linux/irq.h>
#include <asm/io.h>
#include <asm/ioctls.h>
#define PDC_BUFFER_SIZE 512
/* Revisit: We should calculate this based on the actual port settings */
#define PDC_RX_TIMEOUT (3 * 10) /* 3 bytes */
#if defined(CONFIG_SERIAL_ATMEL_CONSOLE) && defined(CONFIG_MAGIC_SYSRQ)
#define SUPPORT_SYSRQ
#endif
#include <linux/serial_core.h>
#include "serial_mctrl_gpio.h"
static void atmel_start_rx(struct uart_port *port);
static void atmel_stop_rx(struct uart_port *port);
#ifdef CONFIG_SERIAL_ATMEL_TTYAT
/* Use device name ttyAT, major 204 and minor 154-169. This is necessary if we
* should coexist with the 8250 driver, such as if we have an external 16C550
* UART. */
#define SERIAL_ATMEL_MAJOR 204
#define MINOR_START 154
#define ATMEL_DEVICENAME "ttyAT"
#else
/* Use device name ttyS, major 4, minor 64-68. This is the usual serial port
* name, but it is legally reserved for the 8250 driver. */
#define SERIAL_ATMEL_MAJOR TTY_MAJOR
#define MINOR_START 64
#define ATMEL_DEVICENAME "ttyS"
#endif
#define ATMEL_ISR_PASS_LIMIT 256
/* UART registers. CR is write-only, hence no GET macro */
#define UART_PUT_CR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_CR)
#define UART_GET_MR(port) __raw_readl((port)->membase + ATMEL_US_MR)
#define UART_PUT_MR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_MR)
#define UART_PUT_IER(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IER)
#define UART_PUT_IDR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_IDR)
#define UART_GET_IMR(port) __raw_readl((port)->membase + ATMEL_US_IMR)
#define UART_GET_CSR(port) __raw_readl((port)->membase + ATMEL_US_CSR)
#define UART_GET_CHAR(port) __raw_readl((port)->membase + ATMEL_US_RHR)
#define UART_PUT_CHAR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_THR)
#define UART_GET_BRGR(port) __raw_readl((port)->membase + ATMEL_US_BRGR)
#define UART_PUT_BRGR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_BRGR)
#define UART_PUT_RTOR(port,v) __raw_writel(v, (port)->membase + ATMEL_US_RTOR)
#define UART_PUT_TTGR(port, v) __raw_writel(v, (port)->membase + ATMEL_US_TTGR)
#define UART_GET_IP_NAME(port) __raw_readl((port)->membase + ATMEL_US_NAME)
#define UART_GET_IP_VERSION(port) __raw_readl((port)->membase + ATMEL_US_VERSION)
/* PDC registers */
#define UART_PUT_PTCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_PTCR)
#define UART_GET_PTSR(port) __raw_readl((port)->membase + ATMEL_PDC_PTSR)
#define UART_PUT_RPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RPR)
#define UART_GET_RPR(port) __raw_readl((port)->membase + ATMEL_PDC_RPR)
#define UART_PUT_RCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RCR)
#define UART_PUT_RNPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNPR)
#define UART_PUT_RNCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_RNCR)
#define UART_PUT_TPR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TPR)
#define UART_PUT_TCR(port,v) __raw_writel(v, (port)->membase + ATMEL_PDC_TCR)
#define UART_GET_TCR(port) __raw_readl((port)->membase + ATMEL_PDC_TCR)
struct atmel_dma_buffer {
unsigned char *buf;
dma_addr_t dma_addr;
unsigned int dma_size;
unsigned int ofs;
};
struct atmel_uart_char {
u16 status;
u16 ch;
};
#define ATMEL_SERIAL_RINGSIZE 1024
/*
* We wrap our port structure around the generic uart_port.
*/
struct atmel_uart_port {
struct uart_port uart; /* uart */
struct clk *clk; /* uart clock */
int may_wakeup; /* cached value of device_may_wakeup for times we need to disable it */
u32 backup_imr; /* IMR saved during suspend */
int break_active; /* break being received */
bool use_dma_rx; /* enable DMA receiver */
bool use_pdc_rx; /* enable PDC receiver */
short pdc_rx_idx; /* current PDC RX buffer */
struct atmel_dma_buffer pdc_rx[2]; /* PDC receier */
bool use_dma_tx; /* enable DMA transmitter */
bool use_pdc_tx; /* enable PDC transmitter */
struct atmel_dma_buffer pdc_tx; /* PDC transmitter */
spinlock_t lock_tx; /* port lock */
spinlock_t lock_rx; /* port lock */
struct dma_chan *chan_tx;
struct dma_chan *chan_rx;
struct dma_async_tx_descriptor *desc_tx;
struct dma_async_tx_descriptor *desc_rx;
dma_cookie_t cookie_tx;
dma_cookie_t cookie_rx;
struct scatterlist sg_tx;
struct scatterlist sg_rx;
struct tasklet_struct tasklet;
unsigned int irq_status;
unsigned int irq_status_prev;
struct circ_buf rx_ring;
struct serial_rs485 rs485; /* rs485 settings */
struct mctrl_gpios *gpios;
int gpio_irq[UART_GPIO_MAX];
unsigned int tx_done_mask;
bool ms_irq_enabled;
bool is_usart; /* usart or uart */
struct timer_list uart_timer; /* uart timer */
int (*prepare_rx)(struct uart_port *port);
int (*prepare_tx)(struct uart_port *port);
void (*schedule_rx)(struct uart_port *port);
void (*schedule_tx)(struct uart_port *port);
void (*release_rx)(struct uart_port *port);
void (*release_tx)(struct uart_port *port);
};
static struct atmel_uart_port atmel_ports[ATMEL_MAX_UART];
static DECLARE_BITMAP(atmel_ports_in_use, ATMEL_MAX_UART);
#ifdef SUPPORT_SYSRQ
static struct console atmel_console;
#endif
#if defined(CONFIG_OF)
static const struct of_device_id atmel_serial_dt_ids[] = {
{ .compatible = "atmel,at91rm9200-usart" },
{ .compatible = "atmel,at91sam9260-usart" },
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(of, atmel_serial_dt_ids);
#endif
static inline struct atmel_uart_port *
to_atmel_uart_port(struct uart_port *uart)
{
return container_of(uart, struct atmel_uart_port, uart);
}
#ifdef CONFIG_SERIAL_ATMEL_PDC
static bool atmel_use_pdc_rx(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
return atmel_port->use_pdc_rx;
}
static bool atmel_use_pdc_tx(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
return atmel_port->use_pdc_tx;
}
#else
static bool atmel_use_pdc_rx(struct uart_port *port)
{
return false;
}
static bool atmel_use_pdc_tx(struct uart_port *port)
{
return false;
}
#endif
static bool atmel_use_dma_tx(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
return atmel_port->use_dma_tx;
}
static bool atmel_use_dma_rx(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
return atmel_port->use_dma_rx;
}
static unsigned int atmel_get_lines_status(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int status, ret = 0;
status = UART_GET_CSR(port);
mctrl_gpio_get(atmel_port->gpios, &ret);
if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
UART_GPIO_CTS))) {
if (ret & TIOCM_CTS)
status &= ~ATMEL_US_CTS;
else
status |= ATMEL_US_CTS;
}
if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
UART_GPIO_DSR))) {
if (ret & TIOCM_DSR)
status &= ~ATMEL_US_DSR;
else
status |= ATMEL_US_DSR;
}
if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
UART_GPIO_RI))) {
if (ret & TIOCM_RI)
status &= ~ATMEL_US_RI;
else
status |= ATMEL_US_RI;
}
if (!IS_ERR_OR_NULL(mctrl_gpio_to_gpiod(atmel_port->gpios,
UART_GPIO_DCD))) {
if (ret & TIOCM_CD)
status &= ~ATMEL_US_DCD;
else
status |= ATMEL_US_DCD;
}
return status;
}
/* Enable or disable the rs485 support */
void atmel_config_rs485(struct uart_port *port, struct serial_rs485 *rs485conf)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int mode;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
/* Disable interrupts */
UART_PUT_IDR(port, atmel_port->tx_done_mask);
mode = UART_GET_MR(port);
/* Resetting serial mode to RS232 (0x0) */
mode &= ~ATMEL_US_USMODE;
atmel_port->rs485 = *rs485conf;
if (rs485conf->flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
if ((rs485conf->delay_rts_after_send) > 0)
UART_PUT_TTGR(port, rs485conf->delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
if (atmel_use_pdc_tx(port))
atmel_port->tx_done_mask = ATMEL_US_ENDTX |
ATMEL_US_TXBUFE;
else
atmel_port->tx_done_mask = ATMEL_US_TXRDY;
}
UART_PUT_MR(port, mode);
/* Enable interrupts */
UART_PUT_IER(port, atmel_port->tx_done_mask);
spin_unlock_irqrestore(&port->lock, flags);
}
/*
* Return TIOCSER_TEMT when transmitter FIFO and Shift register is empty.
*/
static u_int atmel_tx_empty(struct uart_port *port)
{
return (UART_GET_CSR(port) & ATMEL_US_TXEMPTY) ? TIOCSER_TEMT : 0;
}
/*
* Set state of the modem control output lines
*/
static void atmel_set_mctrl(struct uart_port *port, u_int mctrl)
{
unsigned int control = 0;
unsigned int mode;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (mctrl & TIOCM_RTS)
control |= ATMEL_US_RTSEN;
else
control |= ATMEL_US_RTSDIS;
if (mctrl & TIOCM_DTR)
control |= ATMEL_US_DTREN;
else
control |= ATMEL_US_DTRDIS;
UART_PUT_CR(port, control);
mctrl_gpio_set(atmel_port->gpios, mctrl);
/* Local loopback mode? */
mode = UART_GET_MR(port) & ~ATMEL_US_CHMODE;
if (mctrl & TIOCM_LOOP)
mode |= ATMEL_US_CHMODE_LOC_LOOP;
else
mode |= ATMEL_US_CHMODE_NORMAL;
/* Resetting serial mode to RS232 (0x0) */
mode &= ~ATMEL_US_USMODE;
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
dev_dbg(port->dev, "Setting UART to RS485\n");
if ((atmel_port->rs485.delay_rts_after_send) > 0)
UART_PUT_TTGR(port,
atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
} else {
dev_dbg(port->dev, "Setting UART to RS232\n");
}
UART_PUT_MR(port, mode);
}
/*
* Get state of the modem control input lines
*/
static u_int atmel_get_mctrl(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int ret = 0, status;
status = UART_GET_CSR(port);
/*
* The control signals are active low.
*/
if (!(status & ATMEL_US_DCD))
ret |= TIOCM_CD;
if (!(status & ATMEL_US_CTS))
ret |= TIOCM_CTS;
if (!(status & ATMEL_US_DSR))
ret |= TIOCM_DSR;
if (!(status & ATMEL_US_RI))
ret |= TIOCM_RI;
return mctrl_gpio_get(atmel_port->gpios, &ret);
}
/*
* Stop transmitting.
*/
static void atmel_stop_tx(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_use_pdc_tx(port)) {
/* disable PDC transmit */
UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
}
/* Disable interrupts */
UART_PUT_IDR(port, atmel_port->tx_done_mask);
if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
!(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX))
atmel_start_rx(port);
}
/*
* Start transmitting.
*/
static void atmel_start_tx(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_use_pdc_tx(port)) {
if (UART_GET_PTSR(port) & ATMEL_PDC_TXTEN)
/* The transmitter is already running. Yes, we
really need this.*/
return;
if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
!(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX))
atmel_stop_rx(port);
/* re-enable PDC transmit */
UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
}
/* Enable interrupts */
UART_PUT_IER(port, atmel_port->tx_done_mask);
}
/*
* start receiving - port is in process of being opened.
*/
static void atmel_start_rx(struct uart_port *port)
{
UART_PUT_CR(port, ATMEL_US_RSTSTA); /* reset status and receiver */
UART_PUT_CR(port, ATMEL_US_RXEN);
if (atmel_use_pdc_rx(port)) {
/* enable PDC controller */
UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
port->read_status_mask);
UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
} else {
UART_PUT_IER(port, ATMEL_US_RXRDY);
}
}
/*
* Stop receiving - port is in process of being closed.
*/
static void atmel_stop_rx(struct uart_port *port)
{
UART_PUT_CR(port, ATMEL_US_RXDIS);
if (atmel_use_pdc_rx(port)) {
/* disable PDC receive */
UART_PUT_PTCR(port, ATMEL_PDC_RXTDIS);
UART_PUT_IDR(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT |
port->read_status_mask);
} else {
UART_PUT_IDR(port, ATMEL_US_RXRDY);
}
}
/*
* Enable modem status interrupts
*/
static void atmel_enable_ms(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
uint32_t ier = 0;
/*
* Interrupt should not be enabled twice
*/
if (atmel_port->ms_irq_enabled)
return;
atmel_port->ms_irq_enabled = true;
if (atmel_port->gpio_irq[UART_GPIO_CTS] >= 0)
enable_irq(atmel_port->gpio_irq[UART_GPIO_CTS]);
else
ier |= ATMEL_US_CTSIC;
if (atmel_port->gpio_irq[UART_GPIO_DSR] >= 0)
enable_irq(atmel_port->gpio_irq[UART_GPIO_DSR]);
else
ier |= ATMEL_US_DSRIC;
if (atmel_port->gpio_irq[UART_GPIO_RI] >= 0)
enable_irq(atmel_port->gpio_irq[UART_GPIO_RI]);
else
ier |= ATMEL_US_RIIC;
if (atmel_port->gpio_irq[UART_GPIO_DCD] >= 0)
enable_irq(atmel_port->gpio_irq[UART_GPIO_DCD]);
else
ier |= ATMEL_US_DCDIC;
UART_PUT_IER(port, ier);
}
/*
* Control the transmission of a break signal
*/
static void atmel_break_ctl(struct uart_port *port, int break_state)
{
if (break_state != 0)
UART_PUT_CR(port, ATMEL_US_STTBRK); /* start break */
else
UART_PUT_CR(port, ATMEL_US_STPBRK); /* stop break */
}
/*
* Stores the incoming character in the ring buffer
*/
static void
atmel_buffer_rx_char(struct uart_port *port, unsigned int status,
unsigned int ch)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct circ_buf *ring = &atmel_port->rx_ring;
struct atmel_uart_char *c;
if (!CIRC_SPACE(ring->head, ring->tail, ATMEL_SERIAL_RINGSIZE))
/* Buffer overflow, ignore char */
return;
c = &((struct atmel_uart_char *)ring->buf)[ring->head];
c->status = status;
c->ch = ch;
/* Make sure the character is stored before we update head. */
smp_wmb();
ring->head = (ring->head + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
}
/*
* Deal with parity, framing and overrun errors.
*/
static void atmel_pdc_rxerr(struct uart_port *port, unsigned int status)
{
/* clear error */
UART_PUT_CR(port, ATMEL_US_RSTSTA);
if (status & ATMEL_US_RXBRK) {
/* ignore side-effect */
status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
port->icount.brk++;
}
if (status & ATMEL_US_PARE)
port->icount.parity++;
if (status & ATMEL_US_FRAME)
port->icount.frame++;
if (status & ATMEL_US_OVRE)
port->icount.overrun++;
}
/*
* Characters received (called from interrupt handler)
*/
static void atmel_rx_chars(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int status, ch;
status = UART_GET_CSR(port);
while (status & ATMEL_US_RXRDY) {
ch = UART_GET_CHAR(port);
/*
* note that the error handling code is
* out of the main execution path
*/
if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
| ATMEL_US_OVRE | ATMEL_US_RXBRK)
|| atmel_port->break_active)) {
/* clear error */
UART_PUT_CR(port, ATMEL_US_RSTSTA);
if (status & ATMEL_US_RXBRK
&& !atmel_port->break_active) {
atmel_port->break_active = 1;
UART_PUT_IER(port, ATMEL_US_RXBRK);
} else {
/*
* This is either the end-of-break
* condition or we've received at
* least one character without RXBRK
* being set. In both cases, the next
* RXBRK will indicate start-of-break.
*/
UART_PUT_IDR(port, ATMEL_US_RXBRK);
status &= ~ATMEL_US_RXBRK;
atmel_port->break_active = 0;
}
}
atmel_buffer_rx_char(port, status, ch);
status = UART_GET_CSR(port);
}
tasklet_schedule(&atmel_port->tasklet);
}
/*
* Transmit characters (called from tasklet with TXRDY interrupt
* disabled)
*/
static void atmel_tx_chars(struct uart_port *port)
{
struct circ_buf *xmit = &port->state->xmit;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (port->x_char && UART_GET_CSR(port) & atmel_port->tx_done_mask) {
UART_PUT_CHAR(port, port->x_char);
port->icount.tx++;
port->x_char = 0;
}
if (uart_circ_empty(xmit) || uart_tx_stopped(port))
return;
while (UART_GET_CSR(port) & atmel_port->tx_done_mask) {
UART_PUT_CHAR(port, xmit->buf[xmit->tail]);
xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
port->icount.tx++;
if (uart_circ_empty(xmit))
break;
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
if (!uart_circ_empty(xmit))
/* Enable interrupts */
UART_PUT_IER(port, atmel_port->tx_done_mask);
}
static void atmel_complete_tx_dma(void *arg)
{
struct atmel_uart_port *atmel_port = arg;
struct uart_port *port = &atmel_port->uart;
struct circ_buf *xmit = &port->state->xmit;
struct dma_chan *chan = atmel_port->chan_tx;
unsigned long flags;
spin_lock_irqsave(&port->lock, flags);
if (chan)
dmaengine_terminate_all(chan);
xmit->tail += sg_dma_len(&atmel_port->sg_tx);
xmit->tail &= UART_XMIT_SIZE - 1;
port->icount.tx += sg_dma_len(&atmel_port->sg_tx);
spin_lock_irq(&atmel_port->lock_tx);
async_tx_ack(atmel_port->desc_tx);
atmel_port->cookie_tx = -EINVAL;
atmel_port->desc_tx = NULL;
spin_unlock_irq(&atmel_port->lock_tx);
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
/* Do we really need this? */
if (!uart_circ_empty(xmit))
tasklet_schedule(&atmel_port->tasklet);
spin_unlock_irqrestore(&port->lock, flags);
}
static void atmel_release_tx_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct dma_chan *chan = atmel_port->chan_tx;
if (chan) {
dmaengine_terminate_all(chan);
dma_release_channel(chan);
dma_unmap_sg(port->dev, &atmel_port->sg_tx, 1,
DMA_MEM_TO_DEV);
}
atmel_port->desc_tx = NULL;
atmel_port->chan_tx = NULL;
atmel_port->cookie_tx = -EINVAL;
}
/*
* Called from tasklet with TXRDY interrupt is disabled.
*/
static void atmel_tx_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct circ_buf *xmit = &port->state->xmit;
struct dma_chan *chan = atmel_port->chan_tx;
struct dma_async_tx_descriptor *desc;
struct scatterlist *sg = &atmel_port->sg_tx;
/* Make sure we have an idle channel */
if (atmel_port->desc_tx != NULL)
return;
if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
/*
* DMA is idle now.
* Port xmit buffer is already mapped,
* and it is one page... Just adjust
* offsets and lengths. Since it is a circular buffer,
* we have to transmit till the end, and then the rest.
* Take the port lock to get a
* consistent xmit buffer state.
*/
sg->offset = xmit->tail & (UART_XMIT_SIZE - 1);
sg_dma_address(sg) = (sg_dma_address(sg) &
~(UART_XMIT_SIZE - 1))
+ sg->offset;
sg_dma_len(sg) = CIRC_CNT_TO_END(xmit->head,
xmit->tail,
UART_XMIT_SIZE);
BUG_ON(!sg_dma_len(sg));
desc = dmaengine_prep_slave_sg(chan,
sg,
1,
DMA_MEM_TO_DEV,
DMA_PREP_INTERRUPT |
DMA_CTRL_ACK);
if (!desc) {
dev_err(port->dev, "Failed to send via dma!\n");
return;
}
dma_sync_sg_for_device(port->dev, sg, 1, DMA_MEM_TO_DEV);
atmel_port->desc_tx = desc;
desc->callback = atmel_complete_tx_dma;
desc->callback_param = atmel_port;
atmel_port->cookie_tx = dmaengine_submit(desc);
} else {
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
/* DMA done, stop TX, start RX for RS485 */
atmel_start_rx(port);
}
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
static int atmel_prepare_tx_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
dma_cap_mask_t mask;
struct dma_slave_config config;
int ret, nent;
dma_cap_zero(mask);
dma_cap_set(DMA_SLAVE, mask);
atmel_port->chan_tx = dma_request_slave_channel(port->dev, "tx");
if (atmel_port->chan_tx == NULL)
goto chan_err;
dev_info(port->dev, "using %s for tx DMA transfers\n",
dma_chan_name(atmel_port->chan_tx));
spin_lock_init(&atmel_port->lock_tx);
sg_init_table(&atmel_port->sg_tx, 1);
/* UART circular tx buffer is an aligned page. */
BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
sg_set_page(&atmel_port->sg_tx,
virt_to_page(port->state->xmit.buf),
UART_XMIT_SIZE,
(int)port->state->xmit.buf & ~PAGE_MASK);
nent = dma_map_sg(port->dev,
&atmel_port->sg_tx,
1,
DMA_MEM_TO_DEV);
if (!nent) {
dev_dbg(port->dev, "need to release resource of dma\n");
goto chan_err;
} else {
dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
sg_dma_len(&atmel_port->sg_tx),
port->state->xmit.buf,
sg_dma_address(&atmel_port->sg_tx));
}
/* Configure the slave DMA */
memset(&config, 0, sizeof(config));
config.direction = DMA_MEM_TO_DEV;
config.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
config.dst_addr = port->mapbase + ATMEL_US_THR;
ret = dmaengine_device_control(atmel_port->chan_tx,
DMA_SLAVE_CONFIG,
(unsigned long)&config);
if (ret) {
dev_err(port->dev, "DMA tx slave configuration failed\n");
goto chan_err;
}
return 0;
chan_err:
dev_err(port->dev, "TX channel not available, switch to pio\n");
atmel_port->use_dma_tx = 0;
if (atmel_port->chan_tx)
atmel_release_tx_dma(port);
return -EINVAL;
}
static void atmel_flip_buffer_rx_dma(struct uart_port *port,
char *buf, size_t count)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct tty_port *tport = &port->state->port;
dma_sync_sg_for_cpu(port->dev,
&atmel_port->sg_rx,
1,
DMA_DEV_TO_MEM);
tty_insert_flip_string(tport, buf, count);
dma_sync_sg_for_device(port->dev,
&atmel_port->sg_rx,
1,
DMA_DEV_TO_MEM);
/*
* Drop the lock here since it might end up calling
* uart_start(), which takes the lock.
*/
spin_unlock(&port->lock);
tty_flip_buffer_push(tport);
spin_lock(&port->lock);
}
static void atmel_complete_rx_dma(void *arg)
{
struct uart_port *port = arg;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
tasklet_schedule(&atmel_port->tasklet);
}
static void atmel_release_rx_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct dma_chan *chan = atmel_port->chan_rx;
if (chan) {
dmaengine_terminate_all(chan);
dma_release_channel(chan);
dma_unmap_sg(port->dev, &atmel_port->sg_rx, 1,
DMA_DEV_TO_MEM);
}
atmel_port->desc_rx = NULL;
atmel_port->chan_rx = NULL;
atmel_port->cookie_rx = -EINVAL;
}
static void atmel_rx_from_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct circ_buf *ring = &atmel_port->rx_ring;
struct dma_chan *chan = atmel_port->chan_rx;
struct dma_tx_state state;
enum dma_status dmastat;
size_t pending, count;
/* Reset the UART timeout early so that we don't miss one */
UART_PUT_CR(port, ATMEL_US_STTTO);
dmastat = dmaengine_tx_status(chan,
atmel_port->cookie_rx,
&state);
/* Restart a new tasklet if DMA status is error */
if (dmastat == DMA_ERROR) {
dev_dbg(port->dev, "Get residue error, restart tasklet\n");
UART_PUT_IER(port, ATMEL_US_TIMEOUT);
tasklet_schedule(&atmel_port->tasklet);
return;
}
/* current transfer size should no larger than dma buffer */
pending = sg_dma_len(&atmel_port->sg_rx) - state.residue;
BUG_ON(pending > sg_dma_len(&atmel_port->sg_rx));
/*
* This will take the chars we have so far,
* ring->head will record the transfer size, only new bytes come
* will insert into the framework.
*/
if (pending > ring->head) {
count = pending - ring->head;
atmel_flip_buffer_rx_dma(port, ring->buf + ring->head, count);
ring->head += count;
if (ring->head == sg_dma_len(&atmel_port->sg_rx))
ring->head = 0;
port->icount.rx += count;
}
UART_PUT_IER(port, ATMEL_US_TIMEOUT);
}
static int atmel_prepare_rx_dma(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct dma_async_tx_descriptor *desc;
dma_cap_mask_t mask;
struct dma_slave_config config;
struct circ_buf *ring;
int ret, nent;
ring = &atmel_port->rx_ring;
dma_cap_zero(mask);
dma_cap_set(DMA_CYCLIC, mask);
atmel_port->chan_rx = dma_request_slave_channel(port->dev, "rx");
if (atmel_port->chan_rx == NULL)
goto chan_err;
dev_info(port->dev, "using %s for rx DMA transfers\n",
dma_chan_name(atmel_port->chan_rx));
spin_lock_init(&atmel_port->lock_rx);
sg_init_table(&atmel_port->sg_rx, 1);
/* UART circular rx buffer is an aligned page. */
BUG_ON((int)port->state->xmit.buf & ~PAGE_MASK);
sg_set_page(&atmel_port->sg_rx,
virt_to_page(ring->buf),
ATMEL_SERIAL_RINGSIZE,
(int)ring->buf & ~PAGE_MASK);
nent = dma_map_sg(port->dev,
&atmel_port->sg_rx,
1,
DMA_DEV_TO_MEM);
if (!nent) {
dev_dbg(port->dev, "need to release resource of dma\n");
goto chan_err;
} else {
dev_dbg(port->dev, "%s: mapped %d@%p to %x\n", __func__,
sg_dma_len(&atmel_port->sg_rx),
ring->buf,
sg_dma_address(&atmel_port->sg_rx));
}
/* Configure the slave DMA */
memset(&config, 0, sizeof(config));
config.direction = DMA_DEV_TO_MEM;
config.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
config.src_addr = port->mapbase + ATMEL_US_RHR;
ret = dmaengine_device_control(atmel_port->chan_rx,
DMA_SLAVE_CONFIG,
(unsigned long)&config);
if (ret) {
dev_err(port->dev, "DMA rx slave configuration failed\n");
goto chan_err;
}
/*
* Prepare a cyclic dma transfer, assign 2 descriptors,
* each one is half ring buffer size
*/
desc = dmaengine_prep_dma_cyclic(atmel_port->chan_rx,
sg_dma_address(&atmel_port->sg_rx),
sg_dma_len(&atmel_port->sg_rx),
sg_dma_len(&atmel_port->sg_rx)/2,
DMA_DEV_TO_MEM,
DMA_PREP_INTERRUPT);
desc->callback = atmel_complete_rx_dma;
desc->callback_param = port;
atmel_port->desc_rx = desc;
atmel_port->cookie_rx = dmaengine_submit(desc);
return 0;
chan_err:
dev_err(port->dev, "RX channel not available, switch to pio\n");
atmel_port->use_dma_rx = 0;
if (atmel_port->chan_rx)
atmel_release_rx_dma(port);
return -EINVAL;
}
static void atmel_uart_timer_callback(unsigned long data)
{
struct uart_port *port = (void *)data;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
tasklet_schedule(&atmel_port->tasklet);
mod_timer(&atmel_port->uart_timer, jiffies + uart_poll_timeout(port));
}
/*
* receive interrupt handler.
*/
static void
atmel_handle_receive(struct uart_port *port, unsigned int pending)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_use_pdc_rx(port)) {
/*
* PDC receive. Just schedule the tasklet and let it
* figure out the details.
*
* TODO: We're not handling error flags correctly at
* the moment.
*/
if (pending & (ATMEL_US_ENDRX | ATMEL_US_TIMEOUT)) {
UART_PUT_IDR(port, (ATMEL_US_ENDRX
| ATMEL_US_TIMEOUT));
tasklet_schedule(&atmel_port->tasklet);
}
if (pending & (ATMEL_US_RXBRK | ATMEL_US_OVRE |
ATMEL_US_FRAME | ATMEL_US_PARE))
atmel_pdc_rxerr(port, pending);
}
if (atmel_use_dma_rx(port)) {
if (pending & ATMEL_US_TIMEOUT) {
UART_PUT_IDR(port, ATMEL_US_TIMEOUT);
tasklet_schedule(&atmel_port->tasklet);
}
}
/* Interrupt receive */
if (pending & ATMEL_US_RXRDY)
atmel_rx_chars(port);
else if (pending & ATMEL_US_RXBRK) {
/*
* End of break detected. If it came along with a
* character, atmel_rx_chars will handle it.
*/
UART_PUT_CR(port, ATMEL_US_RSTSTA);
UART_PUT_IDR(port, ATMEL_US_RXBRK);
atmel_port->break_active = 0;
}
}
/*
* transmit interrupt handler. (Transmit is IRQF_NODELAY safe)
*/
static void
atmel_handle_transmit(struct uart_port *port, unsigned int pending)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (pending & atmel_port->tx_done_mask) {
/* Either PDC or interrupt transmission */
UART_PUT_IDR(port, atmel_port->tx_done_mask);
tasklet_schedule(&atmel_port->tasklet);
}
}
/*
* status flags interrupt handler.
*/
static void
atmel_handle_status(struct uart_port *port, unsigned int pending,
unsigned int status)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (pending & (ATMEL_US_RIIC | ATMEL_US_DSRIC | ATMEL_US_DCDIC
| ATMEL_US_CTSIC)) {
atmel_port->irq_status = status;
tasklet_schedule(&atmel_port->tasklet);
}
}
/*
* Interrupt handler
*/
static irqreturn_t atmel_interrupt(int irq, void *dev_id)
{
struct uart_port *port = dev_id;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int status, pending, pass_counter = 0;
bool gpio_handled = false;
do {
status = atmel_get_lines_status(port);
pending = status & UART_GET_IMR(port);
if (!gpio_handled) {
/*
* Dealing with GPIO interrupt
*/
if (irq == atmel_port->gpio_irq[UART_GPIO_CTS])
pending |= ATMEL_US_CTSIC;
if (irq == atmel_port->gpio_irq[UART_GPIO_DSR])
pending |= ATMEL_US_DSRIC;
if (irq == atmel_port->gpio_irq[UART_GPIO_RI])
pending |= ATMEL_US_RIIC;
if (irq == atmel_port->gpio_irq[UART_GPIO_DCD])
pending |= ATMEL_US_DCDIC;
gpio_handled = true;
}
if (!pending)
break;
atmel_handle_receive(port, pending);
atmel_handle_status(port, pending, status);
atmel_handle_transmit(port, pending);
} while (pass_counter++ < ATMEL_ISR_PASS_LIMIT);
return pass_counter ? IRQ_HANDLED : IRQ_NONE;
}
static void atmel_release_tx_pdc(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
dma_unmap_single(port->dev,
pdc->dma_addr,
pdc->dma_size,
DMA_TO_DEVICE);
}
/*
* Called from tasklet with ENDTX and TXBUFE interrupts disabled.
*/
static void atmel_tx_pdc(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct circ_buf *xmit = &port->state->xmit;
struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
int count;
/* nothing left to transmit? */
if (UART_GET_TCR(port))
return;
xmit->tail += pdc->ofs;
xmit->tail &= UART_XMIT_SIZE - 1;
port->icount.tx += pdc->ofs;
pdc->ofs = 0;
/* more to transmit - setup next transfer */
/* disable PDC transmit */
UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
if (!uart_circ_empty(xmit) && !uart_tx_stopped(port)) {
dma_sync_single_for_device(port->dev,
pdc->dma_addr,
pdc->dma_size,
DMA_TO_DEVICE);
count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
pdc->ofs = count;
UART_PUT_TPR(port, pdc->dma_addr + xmit->tail);
UART_PUT_TCR(port, count);
/* re-enable PDC transmit */
UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
/* Enable interrupts */
UART_PUT_IER(port, atmel_port->tx_done_mask);
} else {
if ((atmel_port->rs485.flags & SER_RS485_ENABLED) &&
!(atmel_port->rs485.flags & SER_RS485_RX_DURING_TX)) {
/* DMA done, stop TX, start RX for RS485 */
atmel_start_rx(port);
}
}
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
static int atmel_prepare_tx_pdc(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct atmel_dma_buffer *pdc = &atmel_port->pdc_tx;
struct circ_buf *xmit = &port->state->xmit;
pdc->buf = xmit->buf;
pdc->dma_addr = dma_map_single(port->dev,
pdc->buf,
UART_XMIT_SIZE,
DMA_TO_DEVICE);
pdc->dma_size = UART_XMIT_SIZE;
pdc->ofs = 0;
return 0;
}
static void atmel_rx_from_ring(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct circ_buf *ring = &atmel_port->rx_ring;
unsigned int flg;
unsigned int status;
while (ring->head != ring->tail) {
struct atmel_uart_char c;
/* Make sure c is loaded after head. */
smp_rmb();
c = ((struct atmel_uart_char *)ring->buf)[ring->tail];
ring->tail = (ring->tail + 1) & (ATMEL_SERIAL_RINGSIZE - 1);
port->icount.rx++;
status = c.status;
flg = TTY_NORMAL;
/*
* note that the error handling code is
* out of the main execution path
*/
if (unlikely(status & (ATMEL_US_PARE | ATMEL_US_FRAME
| ATMEL_US_OVRE | ATMEL_US_RXBRK))) {
if (status & ATMEL_US_RXBRK) {
/* ignore side-effect */
status &= ~(ATMEL_US_PARE | ATMEL_US_FRAME);
port->icount.brk++;
if (uart_handle_break(port))
continue;
}
if (status & ATMEL_US_PARE)
port->icount.parity++;
if (status & ATMEL_US_FRAME)
port->icount.frame++;
if (status & ATMEL_US_OVRE)
port->icount.overrun++;
status &= port->read_status_mask;
if (status & ATMEL_US_RXBRK)
flg = TTY_BREAK;
else if (status & ATMEL_US_PARE)
flg = TTY_PARITY;
else if (status & ATMEL_US_FRAME)
flg = TTY_FRAME;
}
if (uart_handle_sysrq_char(port, c.ch))
continue;
uart_insert_char(port, status, ATMEL_US_OVRE, c.ch, flg);
}
/*
* Drop the lock here since it might end up calling
* uart_start(), which takes the lock.
*/
spin_unlock(&port->lock);
tty_flip_buffer_push(&port->state->port);
spin_lock(&port->lock);
}
static void atmel_release_rx_pdc(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int i;
for (i = 0; i < 2; i++) {
struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
dma_unmap_single(port->dev,
pdc->dma_addr,
pdc->dma_size,
DMA_FROM_DEVICE);
kfree(pdc->buf);
}
}
static void atmel_rx_from_pdc(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct tty_port *tport = &port->state->port;
struct atmel_dma_buffer *pdc;
int rx_idx = atmel_port->pdc_rx_idx;
unsigned int head;
unsigned int tail;
unsigned int count;
do {
/* Reset the UART timeout early so that we don't miss one */
UART_PUT_CR(port, ATMEL_US_STTTO);
pdc = &atmel_port->pdc_rx[rx_idx];
head = UART_GET_RPR(port) - pdc->dma_addr;
tail = pdc->ofs;
/* If the PDC has switched buffers, RPR won't contain
* any address within the current buffer. Since head
* is unsigned, we just need a one-way comparison to
* find out.
*
* In this case, we just need to consume the entire
* buffer and resubmit it for DMA. This will clear the
* ENDRX bit as well, so that we can safely re-enable
* all interrupts below.
*/
head = min(head, pdc->dma_size);
if (likely(head != tail)) {
dma_sync_single_for_cpu(port->dev, pdc->dma_addr,
pdc->dma_size, DMA_FROM_DEVICE);
/*
* head will only wrap around when we recycle
* the DMA buffer, and when that happens, we
* explicitly set tail to 0. So head will
* always be greater than tail.
*/
count = head - tail;
tty_insert_flip_string(tport, pdc->buf + pdc->ofs,
count);
dma_sync_single_for_device(port->dev, pdc->dma_addr,
pdc->dma_size, DMA_FROM_DEVICE);
port->icount.rx += count;
pdc->ofs = head;
}
/*
* If the current buffer is full, we need to check if
* the next one contains any additional data.
*/
if (head >= pdc->dma_size) {
pdc->ofs = 0;
UART_PUT_RNPR(port, pdc->dma_addr);
UART_PUT_RNCR(port, pdc->dma_size);
rx_idx = !rx_idx;
atmel_port->pdc_rx_idx = rx_idx;
}
} while (head >= pdc->dma_size);
/*
* Drop the lock here since it might end up calling
* uart_start(), which takes the lock.
*/
spin_unlock(&port->lock);
tty_flip_buffer_push(tport);
spin_lock(&port->lock);
UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
}
static int atmel_prepare_rx_pdc(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int i;
for (i = 0; i < 2; i++) {
struct atmel_dma_buffer *pdc = &atmel_port->pdc_rx[i];
pdc->buf = kmalloc(PDC_BUFFER_SIZE, GFP_KERNEL);
if (pdc->buf == NULL) {
if (i != 0) {
dma_unmap_single(port->dev,
atmel_port->pdc_rx[0].dma_addr,
PDC_BUFFER_SIZE,
DMA_FROM_DEVICE);
kfree(atmel_port->pdc_rx[0].buf);
}
atmel_port->use_pdc_rx = 0;
return -ENOMEM;
}
pdc->dma_addr = dma_map_single(port->dev,
pdc->buf,
PDC_BUFFER_SIZE,
DMA_FROM_DEVICE);
pdc->dma_size = PDC_BUFFER_SIZE;
pdc->ofs = 0;
}
atmel_port->pdc_rx_idx = 0;
UART_PUT_RPR(port, atmel_port->pdc_rx[0].dma_addr);
UART_PUT_RCR(port, PDC_BUFFER_SIZE);
UART_PUT_RNPR(port, atmel_port->pdc_rx[1].dma_addr);
UART_PUT_RNCR(port, PDC_BUFFER_SIZE);
return 0;
}
/*
* tasklet handling tty stuff outside the interrupt handler.
*/
static void atmel_tasklet_func(unsigned long data)
{
struct uart_port *port = (struct uart_port *)data;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int status;
unsigned int status_change;
/* The interrupt handler does not take the lock */
spin_lock(&port->lock);
atmel_port->schedule_tx(port);
status = atmel_port->irq_status;
status_change = status ^ atmel_port->irq_status_prev;
if (status_change & (ATMEL_US_RI | ATMEL_US_DSR
| ATMEL_US_DCD | ATMEL_US_CTS)) {
/* TODO: All reads to CSR will clear these interrupts! */
if (status_change & ATMEL_US_RI)
port->icount.rng++;
if (status_change & ATMEL_US_DSR)
port->icount.dsr++;
if (status_change & ATMEL_US_DCD)
uart_handle_dcd_change(port, !(status & ATMEL_US_DCD));
if (status_change & ATMEL_US_CTS)
uart_handle_cts_change(port, !(status & ATMEL_US_CTS));
wake_up_interruptible(&port->state->port.delta_msr_wait);
atmel_port->irq_status_prev = status;
}
atmel_port->schedule_rx(port);
spin_unlock(&port->lock);
}
static int atmel_init_property(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
if (np) {
/* DMA/PDC usage specification */
if (of_get_property(np, "atmel,use-dma-rx", NULL)) {
if (of_get_property(np, "dmas", NULL)) {
atmel_port->use_dma_rx = true;
atmel_port->use_pdc_rx = false;
} else {
atmel_port->use_dma_rx = false;
atmel_port->use_pdc_rx = true;
}
} else {
atmel_port->use_dma_rx = false;
atmel_port->use_pdc_rx = false;
}
if (of_get_property(np, "atmel,use-dma-tx", NULL)) {
if (of_get_property(np, "dmas", NULL)) {
atmel_port->use_dma_tx = true;
atmel_port->use_pdc_tx = false;
} else {
atmel_port->use_dma_tx = false;
atmel_port->use_pdc_tx = true;
}
} else {
atmel_port->use_dma_tx = false;
atmel_port->use_pdc_tx = false;
}
} else {
atmel_port->use_pdc_rx = pdata->use_dma_rx;
atmel_port->use_pdc_tx = pdata->use_dma_tx;
atmel_port->use_dma_rx = false;
atmel_port->use_dma_tx = false;
}
return 0;
}
static void atmel_init_rs485(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
if (np) {
u32 rs485_delay[2];
/* rs485 properties */
if (of_property_read_u32_array(np, "rs485-rts-delay",
rs485_delay, 2) == 0) {
struct serial_rs485 *rs485conf = &atmel_port->rs485;
rs485conf->delay_rts_before_send = rs485_delay[0];
rs485conf->delay_rts_after_send = rs485_delay[1];
rs485conf->flags = 0;
if (of_get_property(np, "rs485-rx-during-tx", NULL))
rs485conf->flags |= SER_RS485_RX_DURING_TX;
if (of_get_property(np, "linux,rs485-enabled-at-boot-time",
NULL))
rs485conf->flags |= SER_RS485_ENABLED;
}
} else {
atmel_port->rs485 = pdata->rs485;
}
}
static void atmel_set_ops(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_use_dma_rx(port)) {
atmel_port->prepare_rx = &atmel_prepare_rx_dma;
atmel_port->schedule_rx = &atmel_rx_from_dma;
atmel_port->release_rx = &atmel_release_rx_dma;
} else if (atmel_use_pdc_rx(port)) {
atmel_port->prepare_rx = &atmel_prepare_rx_pdc;
atmel_port->schedule_rx = &atmel_rx_from_pdc;
atmel_port->release_rx = &atmel_release_rx_pdc;
} else {
atmel_port->prepare_rx = NULL;
atmel_port->schedule_rx = &atmel_rx_from_ring;
atmel_port->release_rx = NULL;
}
if (atmel_use_dma_tx(port)) {
atmel_port->prepare_tx = &atmel_prepare_tx_dma;
atmel_port->schedule_tx = &atmel_tx_dma;
atmel_port->release_tx = &atmel_release_tx_dma;
} else if (atmel_use_pdc_tx(port)) {
atmel_port->prepare_tx = &atmel_prepare_tx_pdc;
atmel_port->schedule_tx = &atmel_tx_pdc;
atmel_port->release_tx = &atmel_release_tx_pdc;
} else {
atmel_port->prepare_tx = NULL;
atmel_port->schedule_tx = &atmel_tx_chars;
atmel_port->release_tx = NULL;
}
}
/*
* Get ip name usart or uart
*/
static void atmel_get_ip_name(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int name = UART_GET_IP_NAME(port);
u32 version;
int usart, uart;
/* usart and uart ascii */
usart = 0x55534152;
uart = 0x44424755;
atmel_port->is_usart = false;
if (name == usart) {
dev_dbg(port->dev, "This is usart\n");
atmel_port->is_usart = true;
} else if (name == uart) {
dev_dbg(port->dev, "This is uart\n");
atmel_port->is_usart = false;
} else {
/* fallback for older SoCs: use version field */
version = UART_GET_IP_VERSION(port);
switch (version) {
case 0x302:
case 0x10213:
dev_dbg(port->dev, "This version is usart\n");
atmel_port->is_usart = true;
break;
case 0x203:
case 0x10202:
dev_dbg(port->dev, "This version is uart\n");
atmel_port->is_usart = false;
break;
default:
dev_err(port->dev, "Not supported ip name nor version, set to uart\n");
}
}
}
static void atmel_free_gpio_irq(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
enum mctrl_gpio_idx i;
for (i = 0; i < UART_GPIO_MAX; i++)
if (atmel_port->gpio_irq[i] >= 0)
free_irq(atmel_port->gpio_irq[i], port);
}
static int atmel_request_gpio_irq(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int *irq = atmel_port->gpio_irq;
enum mctrl_gpio_idx i;
int err = 0;
for (i = 0; (i < UART_GPIO_MAX) && !err; i++) {
if (irq[i] < 0)
continue;
irq_set_status_flags(irq[i], IRQ_NOAUTOEN);
err = request_irq(irq[i], atmel_interrupt, IRQ_TYPE_EDGE_BOTH,
"atmel_serial", port);
if (err)
dev_err(port->dev, "atmel_startup - Can't get %d irq\n",
irq[i]);
}
/*
* If something went wrong, rollback.
*/
while (err && (--i >= 0))
if (irq[i] >= 0)
free_irq(irq[i], port);
return err;
}
/*
* Perform initialization and enable port for reception
*/
static int atmel_startup(struct uart_port *port)
{
struct platform_device *pdev = to_platform_device(port->dev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
struct tty_struct *tty = port->state->port.tty;
int retval;
/*
* Ensure that no interrupts are enabled otherwise when
* request_irq() is called we could get stuck trying to
* handle an unexpected interrupt
*/
UART_PUT_IDR(port, -1);
atmel_port->ms_irq_enabled = false;
/*
* Allocate the IRQ
*/
retval = request_irq(port->irq, atmel_interrupt, IRQF_SHARED,
tty ? tty->name : "atmel_serial", port);
if (retval) {
dev_err(port->dev, "atmel_startup - Can't get irq\n");
return retval;
}
/*
* Get the GPIO lines IRQ
*/
retval = atmel_request_gpio_irq(port);
if (retval)
goto free_irq;
/*
* Initialize DMA (if necessary)
*/
atmel_init_property(atmel_port, pdev);
if (atmel_port->prepare_rx) {
retval = atmel_port->prepare_rx(port);
if (retval < 0)
atmel_set_ops(port);
}
if (atmel_port->prepare_tx) {
retval = atmel_port->prepare_tx(port);
if (retval < 0)
atmel_set_ops(port);
}
/* Save current CSR for comparison in atmel_tasklet_func() */
atmel_port->irq_status_prev = atmel_get_lines_status(port);
atmel_port->irq_status = atmel_port->irq_status_prev;
/*
* Finally, enable the serial port
*/
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
/* enable xmit & rcvr */
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
setup_timer(&atmel_port->uart_timer,
atmel_uart_timer_callback,
(unsigned long)port);
if (atmel_use_pdc_rx(port)) {
/* set UART timeout */
if (!atmel_port->is_usart) {
mod_timer(&atmel_port->uart_timer,
jiffies + uart_poll_timeout(port));
/* set USART timeout */
} else {
UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
UART_PUT_CR(port, ATMEL_US_STTTO);
UART_PUT_IER(port, ATMEL_US_ENDRX | ATMEL_US_TIMEOUT);
}
/* enable PDC controller */
UART_PUT_PTCR(port, ATMEL_PDC_RXTEN);
} else if (atmel_use_dma_rx(port)) {
/* set UART timeout */
if (!atmel_port->is_usart) {
mod_timer(&atmel_port->uart_timer,
jiffies + uart_poll_timeout(port));
/* set USART timeout */
} else {
UART_PUT_RTOR(port, PDC_RX_TIMEOUT);
UART_PUT_CR(port, ATMEL_US_STTTO);
UART_PUT_IER(port, ATMEL_US_TIMEOUT);
}
} else {
/* enable receive only */
UART_PUT_IER(port, ATMEL_US_RXRDY);
}
return 0;
free_irq:
free_irq(port->irq, port);
return retval;
}
/*
* Disable the port
*/
static void atmel_shutdown(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
/*
* Prevent any tasklets being scheduled during
* cleanup
*/
del_timer_sync(&atmel_port->uart_timer);
/*
* Clear out any scheduled tasklets before
* we destroy the buffers
*/
tasklet_kill(&atmel_port->tasklet);
/*
* Ensure everything is stopped and
* disable all interrupts, port and break condition.
*/
atmel_stop_rx(port);
atmel_stop_tx(port);
UART_PUT_CR(port, ATMEL_US_RSTSTA);
UART_PUT_IDR(port, -1);
/*
* Shut-down the DMA.
*/
if (atmel_port->release_rx)
atmel_port->release_rx(port);
if (atmel_port->release_tx)
atmel_port->release_tx(port);
/*
* Reset ring buffer pointers
*/
atmel_port->rx_ring.head = 0;
atmel_port->rx_ring.tail = 0;
/*
* Free the interrupts
*/
free_irq(port->irq, port);
atmel_free_gpio_irq(port);
atmel_port->ms_irq_enabled = false;
}
/*
* Flush any TX data submitted for DMA. Called when the TX circular
* buffer is reset.
*/
static void atmel_flush_buffer(struct uart_port *port)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_use_pdc_tx(port)) {
UART_PUT_TCR(port, 0);
atmel_port->pdc_tx.ofs = 0;
}
}
/*
* Power / Clock management.
*/
static void atmel_serial_pm(struct uart_port *port, unsigned int state,
unsigned int oldstate)
{
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
switch (state) {
case 0:
/*
* Enable the peripheral clock for this serial port.
* This is called on uart_open() or a resume event.
*/
clk_prepare_enable(atmel_port->clk);
/* re-enable interrupts if we disabled some on suspend */
UART_PUT_IER(port, atmel_port->backup_imr);
break;
case 3:
/* Back up the interrupt mask and disable all interrupts */
atmel_port->backup_imr = UART_GET_IMR(port);
UART_PUT_IDR(port, -1);
/*
* Disable the peripheral clock for this serial port.
* This is called on uart_close() or a suspend event.
*/
clk_disable_unprepare(atmel_port->clk);
break;
default:
dev_err(port->dev, "atmel_serial: unknown pm %d\n", state);
}
}
/*
* Change the port parameters
*/
static void atmel_set_termios(struct uart_port *port, struct ktermios *termios,
struct ktermios *old)
{
unsigned long flags;
unsigned int mode, imr, quot, baud;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
/* Get current mode register */
mode = UART_GET_MR(port) & ~(ATMEL_US_USCLKS | ATMEL_US_CHRL
| ATMEL_US_NBSTOP | ATMEL_US_PAR
| ATMEL_US_USMODE);
baud = uart_get_baud_rate(port, termios, old, 0, port->uartclk / 16);
quot = uart_get_divisor(port, baud);
if (quot > 65535) { /* BRGR is 16-bit, so switch to slower clock */
quot /= 8;
mode |= ATMEL_US_USCLKS_MCK_DIV8;
}
/* byte size */
switch (termios->c_cflag & CSIZE) {
case CS5:
mode |= ATMEL_US_CHRL_5;
break;
case CS6:
mode |= ATMEL_US_CHRL_6;
break;
case CS7:
mode |= ATMEL_US_CHRL_7;
break;
default:
mode |= ATMEL_US_CHRL_8;
break;
}
/* stop bits */
if (termios->c_cflag & CSTOPB)
mode |= ATMEL_US_NBSTOP_2;
/* parity */
if (termios->c_cflag & PARENB) {
/* Mark or Space parity */
if (termios->c_cflag & CMSPAR) {
if (termios->c_cflag & PARODD)
mode |= ATMEL_US_PAR_MARK;
else
mode |= ATMEL_US_PAR_SPACE;
} else if (termios->c_cflag & PARODD)
mode |= ATMEL_US_PAR_ODD;
else
mode |= ATMEL_US_PAR_EVEN;
} else
mode |= ATMEL_US_PAR_NONE;
/* hardware handshake (RTS/CTS) */
if (termios->c_cflag & CRTSCTS)
mode |= ATMEL_US_USMODE_HWHS;
else
mode |= ATMEL_US_USMODE_NORMAL;
spin_lock_irqsave(&port->lock, flags);
port->read_status_mask = ATMEL_US_OVRE;
if (termios->c_iflag & INPCK)
port->read_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
if (termios->c_iflag & (IGNBRK | BRKINT | PARMRK))
port->read_status_mask |= ATMEL_US_RXBRK;
if (atmel_use_pdc_rx(port))
/* need to enable error interrupts */
UART_PUT_IER(port, port->read_status_mask);
/*
* Characters to ignore
*/
port->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
port->ignore_status_mask |= (ATMEL_US_FRAME | ATMEL_US_PARE);
if (termios->c_iflag & IGNBRK) {
port->ignore_status_mask |= ATMEL_US_RXBRK;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
port->ignore_status_mask |= ATMEL_US_OVRE;
}
/* TODO: Ignore all characters if CREAD is set.*/
/* update the per-port timeout */
uart_update_timeout(port, termios->c_cflag, baud);
/*
* save/disable interrupts. The tty layer will ensure that the
* transmitter is empty if requested by the caller, so there's
* no need to wait for it here.
*/
imr = UART_GET_IMR(port);
UART_PUT_IDR(port, -1);
/* disable receiver and transmitter */
UART_PUT_CR(port, ATMEL_US_TXDIS | ATMEL_US_RXDIS);
/* Resetting serial mode to RS232 (0x0) */
mode &= ~ATMEL_US_USMODE;
if (atmel_port->rs485.flags & SER_RS485_ENABLED) {
if ((atmel_port->rs485.delay_rts_after_send) > 0)
UART_PUT_TTGR(port,
atmel_port->rs485.delay_rts_after_send);
mode |= ATMEL_US_USMODE_RS485;
}
/* set the parity, stop bits and data size */
UART_PUT_MR(port, mode);
/* set the baud rate */
UART_PUT_BRGR(port, quot);
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
/* restore interrupts */
UART_PUT_IER(port, imr);
/* CTS flow-control and modem-status interrupts */
if (UART_ENABLE_MS(port, termios->c_cflag))
port->ops->enable_ms(port);
spin_unlock_irqrestore(&port->lock, flags);
}
static void atmel_set_ldisc(struct uart_port *port, int new)
{
if (new == N_PPS) {
port->flags |= UPF_HARDPPS_CD;
atmel_enable_ms(port);
} else {
port->flags &= ~UPF_HARDPPS_CD;
}
}
/*
* Return string describing the specified port
*/
static const char *atmel_type(struct uart_port *port)
{
return (port->type == PORT_ATMEL) ? "ATMEL_SERIAL" : NULL;
}
/*
* Release the memory region(s) being used by 'port'.
*/
static void atmel_release_port(struct uart_port *port)
{
struct platform_device *pdev = to_platform_device(port->dev);
int size = pdev->resource[0].end - pdev->resource[0].start + 1;
release_mem_region(port->mapbase, size);
if (port->flags & UPF_IOREMAP) {
iounmap(port->membase);
port->membase = NULL;
}
}
/*
* Request the memory region(s) being used by 'port'.
*/
static int atmel_request_port(struct uart_port *port)
{
struct platform_device *pdev = to_platform_device(port->dev);
int size = pdev->resource[0].end - pdev->resource[0].start + 1;
if (!request_mem_region(port->mapbase, size, "atmel_serial"))
return -EBUSY;
if (port->flags & UPF_IOREMAP) {
port->membase = ioremap(port->mapbase, size);
if (port->membase == NULL) {
release_mem_region(port->mapbase, size);
return -ENOMEM;
}
}
return 0;
}
/*
* Configure/autoconfigure the port.
*/
static void atmel_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE) {
port->type = PORT_ATMEL;
atmel_request_port(port);
}
}
/*
* Verify the new serial_struct (for TIOCSSERIAL).
*/
static int atmel_verify_port(struct uart_port *port, struct serial_struct *ser)
{
int ret = 0;
if (ser->type != PORT_UNKNOWN && ser->type != PORT_ATMEL)
ret = -EINVAL;
if (port->irq != ser->irq)
ret = -EINVAL;
if (ser->io_type != SERIAL_IO_MEM)
ret = -EINVAL;
if (port->uartclk / 16 != ser->baud_base)
ret = -EINVAL;
if ((void *)port->mapbase != ser->iomem_base)
ret = -EINVAL;
if (port->iobase != ser->port)
ret = -EINVAL;
if (ser->hub6 != 0)
ret = -EINVAL;
return ret;
}
#ifdef CONFIG_CONSOLE_POLL
static int atmel_poll_get_char(struct uart_port *port)
{
while (!(UART_GET_CSR(port) & ATMEL_US_RXRDY))
cpu_relax();
return UART_GET_CHAR(port);
}
static void atmel_poll_put_char(struct uart_port *port, unsigned char ch)
{
while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
cpu_relax();
UART_PUT_CHAR(port, ch);
}
#endif
static int
atmel_ioctl(struct uart_port *port, unsigned int cmd, unsigned long arg)
{
struct serial_rs485 rs485conf;
switch (cmd) {
case TIOCSRS485:
if (copy_from_user(&rs485conf, (struct serial_rs485 *) arg,
sizeof(rs485conf)))
return -EFAULT;
atmel_config_rs485(port, &rs485conf);
break;
case TIOCGRS485:
if (copy_to_user((struct serial_rs485 *) arg,
&(to_atmel_uart_port(port)->rs485),
sizeof(rs485conf)))
return -EFAULT;
break;
default:
return -ENOIOCTLCMD;
}
return 0;
}
static struct uart_ops atmel_pops = {
.tx_empty = atmel_tx_empty,
.set_mctrl = atmel_set_mctrl,
.get_mctrl = atmel_get_mctrl,
.stop_tx = atmel_stop_tx,
.start_tx = atmel_start_tx,
.stop_rx = atmel_stop_rx,
.enable_ms = atmel_enable_ms,
.break_ctl = atmel_break_ctl,
.startup = atmel_startup,
.shutdown = atmel_shutdown,
.flush_buffer = atmel_flush_buffer,
.set_termios = atmel_set_termios,
.set_ldisc = atmel_set_ldisc,
.type = atmel_type,
.release_port = atmel_release_port,
.request_port = atmel_request_port,
.config_port = atmel_config_port,
.verify_port = atmel_verify_port,
.pm = atmel_serial_pm,
.ioctl = atmel_ioctl,
#ifdef CONFIG_CONSOLE_POLL
.poll_get_char = atmel_poll_get_char,
.poll_put_char = atmel_poll_put_char,
#endif
};
/*
* Configure the port from the platform device resource info.
*/
static int atmel_init_port(struct atmel_uart_port *atmel_port,
struct platform_device *pdev)
{
int ret;
struct uart_port *port = &atmel_port->uart;
struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
if (!atmel_init_property(atmel_port, pdev))
atmel_set_ops(port);
atmel_init_rs485(atmel_port, pdev);
port->iotype = UPIO_MEM;
port->flags = UPF_BOOT_AUTOCONF;
port->ops = &atmel_pops;
port->fifosize = 1;
port->dev = &pdev->dev;
port->mapbase = pdev->resource[0].start;
port->irq = pdev->resource[1].start;
tasklet_init(&atmel_port->tasklet, atmel_tasklet_func,
(unsigned long)port);
memset(&atmel_port->rx_ring, 0, sizeof(atmel_port->rx_ring));
if (pdata && pdata->regs) {
/* Already mapped by setup code */
port->membase = pdata->regs;
} else {
port->flags |= UPF_IOREMAP;
port->membase = NULL;
}
/* for console, the clock could already be configured */
if (!atmel_port->clk) {
atmel_port->clk = clk_get(&pdev->dev, "usart");
if (IS_ERR(atmel_port->clk)) {
ret = PTR_ERR(atmel_port->clk);
atmel_port->clk = NULL;
return ret;
}
ret = clk_prepare_enable(atmel_port->clk);
if (ret) {
clk_put(atmel_port->clk);
atmel_port->clk = NULL;
return ret;
}
port->uartclk = clk_get_rate(atmel_port->clk);
clk_disable_unprepare(atmel_port->clk);
/* only enable clock when USART is in use */
}
/* Use TXEMPTY for interrupt when rs485 else TXRDY or ENDTX|TXBUFE */
if (atmel_port->rs485.flags & SER_RS485_ENABLED)
atmel_port->tx_done_mask = ATMEL_US_TXEMPTY;
else if (atmel_use_pdc_tx(port)) {
port->fifosize = PDC_BUFFER_SIZE;
atmel_port->tx_done_mask = ATMEL_US_ENDTX | ATMEL_US_TXBUFE;
} else {
atmel_port->tx_done_mask = ATMEL_US_TXRDY;
}
return 0;
}
struct platform_device *atmel_default_console_device; /* the serial console device */
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
static void atmel_console_putchar(struct uart_port *port, int ch)
{
while (!(UART_GET_CSR(port) & ATMEL_US_TXRDY))
cpu_relax();
UART_PUT_CHAR(port, ch);
}
/*
* Interrupts are disabled on entering
*/
static void atmel_console_write(struct console *co, const char *s, u_int count)
{
struct uart_port *port = &atmel_ports[co->index].uart;
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
unsigned int status, imr;
unsigned int pdc_tx;
/*
* First, save IMR and then disable interrupts
*/
imr = UART_GET_IMR(port);
UART_PUT_IDR(port, ATMEL_US_RXRDY | atmel_port->tx_done_mask);
/* Store PDC transmit status and disable it */
pdc_tx = UART_GET_PTSR(port) & ATMEL_PDC_TXTEN;
UART_PUT_PTCR(port, ATMEL_PDC_TXTDIS);
uart_console_write(port, s, count, atmel_console_putchar);
/*
* Finally, wait for transmitter to become empty
* and restore IMR
*/
do {
status = UART_GET_CSR(port);
} while (!(status & ATMEL_US_TXRDY));
/* Restore PDC transmit status */
if (pdc_tx)
UART_PUT_PTCR(port, ATMEL_PDC_TXTEN);
/* set interrupts back the way they were */
UART_PUT_IER(port, imr);
}
/*
* If the port was already initialised (eg, by a boot loader),
* try to determine the current setup.
*/
static void __init atmel_console_get_options(struct uart_port *port, int *baud,
int *parity, int *bits)
{
unsigned int mr, quot;
/*
* If the baud rate generator isn't running, the port wasn't
* initialized by the boot loader.
*/
quot = UART_GET_BRGR(port) & ATMEL_US_CD;
if (!quot)
return;
mr = UART_GET_MR(port) & ATMEL_US_CHRL;
if (mr == ATMEL_US_CHRL_8)
*bits = 8;
else
*bits = 7;
mr = UART_GET_MR(port) & ATMEL_US_PAR;
if (mr == ATMEL_US_PAR_EVEN)
*parity = 'e';
else if (mr == ATMEL_US_PAR_ODD)
*parity = 'o';
/*
* The serial core only rounds down when matching this to a
* supported baud rate. Make sure we don't end up slightly
* lower than one of those, as it would make us fall through
* to a much lower baud rate than we really want.
*/
*baud = port->uartclk / (16 * (quot - 1));
}
static int __init atmel_console_setup(struct console *co, char *options)
{
int ret;
struct uart_port *port = &atmel_ports[co->index].uart;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
if (port->membase == NULL) {
/* Port not initialized yet - delay setup */
return -ENODEV;
}
ret = clk_prepare_enable(atmel_ports[co->index].clk);
if (ret)
return ret;
UART_PUT_IDR(port, -1);
UART_PUT_CR(port, ATMEL_US_RSTSTA | ATMEL_US_RSTRX);
UART_PUT_CR(port, ATMEL_US_TXEN | ATMEL_US_RXEN);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
else
atmel_console_get_options(port, &baud, &parity, &bits);
return uart_set_options(port, co, baud, parity, bits, flow);
}
static struct uart_driver atmel_uart;
static struct console atmel_console = {
.name = ATMEL_DEVICENAME,
.write = atmel_console_write,
.device = uart_console_device,
.setup = atmel_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &atmel_uart,
};
#define ATMEL_CONSOLE_DEVICE (&atmel_console)
/*
* Early console initialization (before VM subsystem initialized).
*/
static int __init atmel_console_init(void)
{
int ret;
if (atmel_default_console_device) {
struct atmel_uart_data *pdata =
dev_get_platdata(&atmel_default_console_device->dev);
int id = pdata->num;
struct atmel_uart_port *port = &atmel_ports[id];
port->backup_imr = 0;
port->uart.line = id;
add_preferred_console(ATMEL_DEVICENAME, id, NULL);
ret = atmel_init_port(port, atmel_default_console_device);
if (ret)
return ret;
register_console(&atmel_console);
}
return 0;
}
console_initcall(atmel_console_init);
/*
* Late console initialization.
*/
static int __init atmel_late_console_init(void)
{
if (atmel_default_console_device
&& !(atmel_console.flags & CON_ENABLED))
register_console(&atmel_console);
return 0;
}
core_initcall(atmel_late_console_init);
static inline bool atmel_is_console_port(struct uart_port *port)
{
return port->cons && port->cons->index == port->line;
}
#else
#define ATMEL_CONSOLE_DEVICE NULL
static inline bool atmel_is_console_port(struct uart_port *port)
{
return false;
}
#endif
static struct uart_driver atmel_uart = {
.owner = THIS_MODULE,
.driver_name = "atmel_serial",
.dev_name = ATMEL_DEVICENAME,
.major = SERIAL_ATMEL_MAJOR,
.minor = MINOR_START,
.nr = ATMEL_MAX_UART,
.cons = ATMEL_CONSOLE_DEVICE,
};
#ifdef CONFIG_PM
static bool atmel_serial_clk_will_stop(void)
{
#ifdef CONFIG_ARCH_AT91
return at91_suspend_entering_slow_clock();
#else
return false;
#endif
}
static int atmel_serial_suspend(struct platform_device *pdev,
pm_message_t state)
{
struct uart_port *port = platform_get_drvdata(pdev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
if (atmel_is_console_port(port) && console_suspend_enabled) {
/* Drain the TX shifter */
while (!(UART_GET_CSR(port) & ATMEL_US_TXEMPTY))
cpu_relax();
}
/* we can not wake up if we're running on slow clock */
atmel_port->may_wakeup = device_may_wakeup(&pdev->dev);
if (atmel_serial_clk_will_stop())
device_set_wakeup_enable(&pdev->dev, 0);
uart_suspend_port(&atmel_uart, port);
return 0;
}
static int atmel_serial_resume(struct platform_device *pdev)
{
struct uart_port *port = platform_get_drvdata(pdev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
uart_resume_port(&atmel_uart, port);
device_set_wakeup_enable(&pdev->dev, atmel_port->may_wakeup);
return 0;
}
#else
#define atmel_serial_suspend NULL
#define atmel_serial_resume NULL
#endif
static int atmel_init_gpios(struct atmel_uart_port *p, struct device *dev)
{
enum mctrl_gpio_idx i;
struct gpio_desc *gpiod;
p->gpios = mctrl_gpio_init(dev, 0);
if (IS_ERR_OR_NULL(p->gpios))
return -1;
for (i = 0; i < UART_GPIO_MAX; i++) {
gpiod = mctrl_gpio_to_gpiod(p->gpios, i);
if (gpiod && (gpiod_get_direction(gpiod) == GPIOF_DIR_IN))
p->gpio_irq[i] = gpiod_to_irq(gpiod);
else
p->gpio_irq[i] = -EINVAL;
}
return 0;
}
static int atmel_serial_probe(struct platform_device *pdev)
{
struct atmel_uart_port *port;
struct device_node *np = pdev->dev.of_node;
struct atmel_uart_data *pdata = dev_get_platdata(&pdev->dev);
void *data;
int ret = -ENODEV;
BUILD_BUG_ON(ATMEL_SERIAL_RINGSIZE & (ATMEL_SERIAL_RINGSIZE - 1));
if (np)
ret = of_alias_get_id(np, "serial");
else
if (pdata)
ret = pdata->num;
if (ret < 0)
/* port id not found in platform data nor device-tree aliases:
* auto-enumerate it */
ret = find_first_zero_bit(atmel_ports_in_use, ATMEL_MAX_UART);
if (ret >= ATMEL_MAX_UART) {
ret = -ENODEV;
goto err;
}
if (test_and_set_bit(ret, atmel_ports_in_use)) {
/* port already in use */
ret = -EBUSY;
goto err;
}
port = &atmel_ports[ret];
port->backup_imr = 0;
port->uart.line = ret;
ret = atmel_init_gpios(port, &pdev->dev);
if (ret < 0)
dev_err(&pdev->dev, "%s",
"Failed to initialize GPIOs. The serial port may not work as expected");
ret = atmel_init_port(port, pdev);
if (ret)
goto err;
if (!atmel_use_pdc_rx(&port->uart)) {
ret = -ENOMEM;
data = kmalloc(sizeof(struct atmel_uart_char)
* ATMEL_SERIAL_RINGSIZE, GFP_KERNEL);
if (!data)
goto err_alloc_ring;
port->rx_ring.buf = data;
}
ret = uart_add_one_port(&atmel_uart, &port->uart);
if (ret)
goto err_add_port;
#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
if (atmel_is_console_port(&port->uart)
&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
/*
* The serial core enabled the clock for us, so undo
* the clk_prepare_enable() in atmel_console_setup()
*/
clk_disable_unprepare(port->clk);
}
#endif
device_init_wakeup(&pdev->dev, 1);
platform_set_drvdata(pdev, port);
if (port->rs485.flags & SER_RS485_ENABLED) {
UART_PUT_MR(&port->uart, ATMEL_US_USMODE_NORMAL);
UART_PUT_CR(&port->uart, ATMEL_US_RTSEN);
}
/*
* Get port name of usart or uart
*/
atmel_get_ip_name(&port->uart);
return 0;
err_add_port:
kfree(port->rx_ring.buf);
port->rx_ring.buf = NULL;
err_alloc_ring:
if (!atmel_is_console_port(&port->uart)) {
clk_put(port->clk);
port->clk = NULL;
}
err:
return ret;
}
static int atmel_serial_remove(struct platform_device *pdev)
{
struct uart_port *port = platform_get_drvdata(pdev);
struct atmel_uart_port *atmel_port = to_atmel_uart_port(port);
int ret = 0;
tasklet_kill(&atmel_port->tasklet);
device_init_wakeup(&pdev->dev, 0);
ret = uart_remove_one_port(&atmel_uart, port);
kfree(atmel_port->rx_ring.buf);
/* "port" is allocated statically, so we shouldn't free it */
clear_bit(port->line, atmel_ports_in_use);
clk_put(atmel_port->clk);
return ret;
}
static struct platform_driver atmel_serial_driver = {
.probe = atmel_serial_probe,
.remove = atmel_serial_remove,
.suspend = atmel_serial_suspend,
.resume = atmel_serial_resume,
.driver = {
.name = "atmel_usart",
.owner = THIS_MODULE,
.of_match_table = of_match_ptr(atmel_serial_dt_ids),
},
};
static int __init atmel_serial_init(void)
{
int ret;
ret = uart_register_driver(&atmel_uart);
if (ret)
return ret;
ret = platform_driver_register(&atmel_serial_driver);
if (ret)
uart_unregister_driver(&atmel_uart);
return ret;
}
static void __exit atmel_serial_exit(void)
{
platform_driver_unregister(&atmel_serial_driver);
uart_unregister_driver(&atmel_uart);
}
module_init(atmel_serial_init);
module_exit(atmel_serial_exit);
MODULE_AUTHOR("Rick Bronson");
MODULE_DESCRIPTION("Atmel AT91 / AT32 serial port driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:atmel_usart");
Reference in New Issue View Git Blame Copy Permalink