720 lines
19 KiB
C
720 lines
19 KiB
C
/*
|
|
* This file is subject to the terms and conditions of the GNU General Public
|
|
* License. See the file "COPYING" in the main directory of this archive
|
|
* for more details.
|
|
*
|
|
* Copyright (C) 1999,2001-2005 Silicon Graphics, Inc. All rights reserved.
|
|
*/
|
|
|
|
|
|
/*
|
|
* Cross Partition Network Interface (XPNET) support
|
|
*
|
|
* XPNET provides a virtual network layered on top of the Cross
|
|
* Partition communication layer.
|
|
*
|
|
* XPNET provides direct point-to-point and broadcast-like support
|
|
* for an ethernet-like device. The ethernet broadcast medium is
|
|
* replaced with a point-to-point message structure which passes
|
|
* pointers to a DMA-capable block that a remote partition should
|
|
* retrieve and pass to the upper level networking layer.
|
|
*
|
|
*/
|
|
|
|
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/pci.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/ethtool.h>
|
|
#include <linux/mii.h>
|
|
#include <linux/smp.h>
|
|
#include <linux/string.h>
|
|
#include <asm/sn/bte.h>
|
|
#include <asm/sn/io.h>
|
|
#include <asm/sn/sn_sal.h>
|
|
#include <asm/types.h>
|
|
#include <asm/atomic.h>
|
|
#include <asm/sn/xp.h>
|
|
|
|
|
|
/*
|
|
* The message payload transferred by XPC.
|
|
*
|
|
* buf_pa is the physical address where the DMA should pull from.
|
|
*
|
|
* NOTE: for performance reasons, buf_pa should _ALWAYS_ begin on a
|
|
* cacheline boundary. To accomplish this, we record the number of
|
|
* bytes from the beginning of the first cacheline to the first useful
|
|
* byte of the skb (leadin_ignore) and the number of bytes from the
|
|
* last useful byte of the skb to the end of the last cacheline
|
|
* (tailout_ignore).
|
|
*
|
|
* size is the number of bytes to transfer which includes the skb->len
|
|
* (useful bytes of the senders skb) plus the leadin and tailout
|
|
*/
|
|
struct xpnet_message {
|
|
u16 version; /* Version for this message */
|
|
u16 embedded_bytes; /* #of bytes embedded in XPC message */
|
|
u32 magic; /* Special number indicating this is xpnet */
|
|
u64 buf_pa; /* phys address of buffer to retrieve */
|
|
u32 size; /* #of bytes in buffer */
|
|
u8 leadin_ignore; /* #of bytes to ignore at the beginning */
|
|
u8 tailout_ignore; /* #of bytes to ignore at the end */
|
|
unsigned char data; /* body of small packets */
|
|
};
|
|
|
|
/*
|
|
* Determine the size of our message, the cacheline aligned size,
|
|
* and then the number of message will request from XPC.
|
|
*
|
|
* XPC expects each message to exist in an individual cacheline.
|
|
*/
|
|
#define XPNET_MSG_SIZE (L1_CACHE_BYTES - XPC_MSG_PAYLOAD_OFFSET)
|
|
#define XPNET_MSG_DATA_MAX \
|
|
(XPNET_MSG_SIZE - (u64)(&((struct xpnet_message *)0)->data))
|
|
#define XPNET_MSG_ALIGNED_SIZE (L1_CACHE_ALIGN(XPNET_MSG_SIZE))
|
|
#define XPNET_MSG_NENTRIES (PAGE_SIZE / XPNET_MSG_ALIGNED_SIZE)
|
|
|
|
|
|
#define XPNET_MAX_KTHREADS (XPNET_MSG_NENTRIES + 1)
|
|
#define XPNET_MAX_IDLE_KTHREADS (XPNET_MSG_NENTRIES + 1)
|
|
|
|
/*
|
|
* Version number of XPNET implementation. XPNET can always talk to versions
|
|
* with same major #, and never talk to versions with a different version.
|
|
*/
|
|
#define _XPNET_VERSION(_major, _minor) (((_major) << 4) | (_minor))
|
|
#define XPNET_VERSION_MAJOR(_v) ((_v) >> 4)
|
|
#define XPNET_VERSION_MINOR(_v) ((_v) & 0xf)
|
|
|
|
#define XPNET_VERSION _XPNET_VERSION(1,0) /* version 1.0 */
|
|
#define XPNET_VERSION_EMBED _XPNET_VERSION(1,1) /* version 1.1 */
|
|
#define XPNET_MAGIC 0x88786984 /* "XNET" */
|
|
|
|
#define XPNET_VALID_MSG(_m) \
|
|
((XPNET_VERSION_MAJOR(_m->version) == XPNET_VERSION_MAJOR(XPNET_VERSION)) \
|
|
&& (msg->magic == XPNET_MAGIC))
|
|
|
|
#define XPNET_DEVICE_NAME "xp0"
|
|
|
|
|
|
/*
|
|
* When messages are queued with xpc_send_notify, a kmalloc'd buffer
|
|
* of the following type is passed as a notification cookie. When the
|
|
* notification function is called, we use the cookie to decide
|
|
* whether all outstanding message sends have completed. The skb can
|
|
* then be released.
|
|
*/
|
|
struct xpnet_pending_msg {
|
|
struct list_head free_list;
|
|
struct sk_buff *skb;
|
|
atomic_t use_count;
|
|
};
|
|
|
|
/* driver specific structure pointed to by the device structure */
|
|
struct xpnet_dev_private {
|
|
struct net_device_stats stats;
|
|
};
|
|
|
|
struct net_device *xpnet_device;
|
|
|
|
/*
|
|
* When we are notified of other partitions activating, we add them to
|
|
* our bitmask of partitions to which we broadcast.
|
|
*/
|
|
static u64 xpnet_broadcast_partitions;
|
|
/* protect above */
|
|
static DEFINE_SPINLOCK(xpnet_broadcast_lock);
|
|
|
|
/*
|
|
* Since the Block Transfer Engine (BTE) is being used for the transfer
|
|
* and it relies upon cache-line size transfers, we need to reserve at
|
|
* least one cache-line for head and tail alignment. The BTE is
|
|
* limited to 8MB transfers.
|
|
*
|
|
* Testing has shown that changing MTU to greater than 64KB has no effect
|
|
* on TCP as the two sides negotiate a Max Segment Size that is limited
|
|
* to 64K. Other protocols May use packets greater than this, but for
|
|
* now, the default is 64KB.
|
|
*/
|
|
#define XPNET_MAX_MTU (0x800000UL - L1_CACHE_BYTES)
|
|
/* 32KB has been determined to be the ideal */
|
|
#define XPNET_DEF_MTU (0x8000UL)
|
|
|
|
|
|
/*
|
|
* The partition id is encapsulated in the MAC address. The following
|
|
* define locates the octet the partid is in.
|
|
*/
|
|
#define XPNET_PARTID_OCTET 1
|
|
#define XPNET_LICENSE_OCTET 2
|
|
|
|
|
|
/*
|
|
* Define the XPNET debug device structure that is to be used with dev_dbg(),
|
|
* dev_err(), dev_warn(), and dev_info().
|
|
*/
|
|
struct device_driver xpnet_dbg_name = {
|
|
.name = "xpnet"
|
|
};
|
|
|
|
struct device xpnet_dbg_subname = {
|
|
.bus_id = {0}, /* set to "" */
|
|
.driver = &xpnet_dbg_name
|
|
};
|
|
|
|
struct device *xpnet = &xpnet_dbg_subname;
|
|
|
|
/*
|
|
* Packet was recevied by XPC and forwarded to us.
|
|
*/
|
|
static void
|
|
xpnet_receive(partid_t partid, int channel, struct xpnet_message *msg)
|
|
{
|
|
struct sk_buff *skb;
|
|
bte_result_t bret;
|
|
struct xpnet_dev_private *priv =
|
|
(struct xpnet_dev_private *) xpnet_device->priv;
|
|
|
|
|
|
if (!XPNET_VALID_MSG(msg)) {
|
|
/*
|
|
* Packet with a different XPC version. Ignore.
|
|
*/
|
|
xpc_received(partid, channel, (void *) msg);
|
|
|
|
priv->stats.rx_errors++;
|
|
|
|
return;
|
|
}
|
|
dev_dbg(xpnet, "received 0x%lx, %d, %d, %d\n", msg->buf_pa, msg->size,
|
|
msg->leadin_ignore, msg->tailout_ignore);
|
|
|
|
|
|
/* reserve an extra cache line */
|
|
skb = dev_alloc_skb(msg->size + L1_CACHE_BYTES);
|
|
if (!skb) {
|
|
dev_err(xpnet, "failed on dev_alloc_skb(%d)\n",
|
|
msg->size + L1_CACHE_BYTES);
|
|
|
|
xpc_received(partid, channel, (void *) msg);
|
|
|
|
priv->stats.rx_errors++;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* The allocated skb has some reserved space.
|
|
* In order to use bte_copy, we need to get the
|
|
* skb->data pointer moved forward.
|
|
*/
|
|
skb_reserve(skb, (L1_CACHE_BYTES - ((u64)skb->data &
|
|
(L1_CACHE_BYTES - 1)) +
|
|
msg->leadin_ignore));
|
|
|
|
/*
|
|
* Update the tail pointer to indicate data actually
|
|
* transferred.
|
|
*/
|
|
skb_put(skb, (msg->size - msg->leadin_ignore - msg->tailout_ignore));
|
|
|
|
/*
|
|
* Move the data over from the the other side.
|
|
*/
|
|
if ((XPNET_VERSION_MINOR(msg->version) == 1) &&
|
|
(msg->embedded_bytes != 0)) {
|
|
dev_dbg(xpnet, "copying embedded message. memcpy(0x%p, 0x%p, "
|
|
"%lu)\n", skb->data, &msg->data,
|
|
(size_t) msg->embedded_bytes);
|
|
|
|
memcpy(skb->data, &msg->data, (size_t) msg->embedded_bytes);
|
|
} else {
|
|
dev_dbg(xpnet, "transferring buffer to the skb->data area;\n\t"
|
|
"bte_copy(0x%p, 0x%p, %hu)\n", (void *)msg->buf_pa,
|
|
(void *)__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
|
|
msg->size);
|
|
|
|
bret = bte_copy(msg->buf_pa,
|
|
__pa((u64)skb->data & ~(L1_CACHE_BYTES - 1)),
|
|
msg->size, (BTE_NOTIFY | BTE_WACQUIRE), NULL);
|
|
|
|
if (bret != BTE_SUCCESS) {
|
|
// >>> Need better way of cleaning skb. Currently skb
|
|
// >>> appears in_use and we can't just call
|
|
// >>> dev_kfree_skb.
|
|
dev_err(xpnet, "bte_copy(0x%p, 0x%p, 0x%hx) returned "
|
|
"error=0x%x\n", (void *)msg->buf_pa,
|
|
(void *)__pa((u64)skb->data &
|
|
~(L1_CACHE_BYTES - 1)),
|
|
msg->size, bret);
|
|
|
|
xpc_received(partid, channel, (void *) msg);
|
|
|
|
priv->stats.rx_errors++;
|
|
|
|
return;
|
|
}
|
|
}
|
|
|
|
dev_dbg(xpnet, "<skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
|
|
"skb->end=0x%p skb->len=%d\n", (void *) skb->head,
|
|
(void *) skb->data, (void *) skb->tail, (void *) skb->end,
|
|
skb->len);
|
|
|
|
skb->dev = xpnet_device;
|
|
skb->protocol = eth_type_trans(skb, xpnet_device);
|
|
skb->ip_summed = CHECKSUM_UNNECESSARY;
|
|
|
|
dev_dbg(xpnet, "passing skb to network layer; \n\tskb->head=0x%p "
|
|
"skb->data=0x%p skb->tail=0x%p skb->end=0x%p skb->len=%d\n",
|
|
(void *) skb->head, (void *) skb->data, (void *) skb->tail,
|
|
(void *) skb->end, skb->len);
|
|
|
|
|
|
xpnet_device->last_rx = jiffies;
|
|
priv->stats.rx_packets++;
|
|
priv->stats.rx_bytes += skb->len + ETH_HLEN;
|
|
|
|
netif_rx_ni(skb);
|
|
xpc_received(partid, channel, (void *) msg);
|
|
}
|
|
|
|
|
|
/*
|
|
* This is the handler which XPC calls during any sort of change in
|
|
* state or message reception on a connection.
|
|
*/
|
|
static void
|
|
xpnet_connection_activity(enum xpc_retval reason, partid_t partid, int channel,
|
|
void *data, void *key)
|
|
{
|
|
long bp;
|
|
|
|
|
|
DBUG_ON(partid <= 0 || partid >= XP_MAX_PARTITIONS);
|
|
DBUG_ON(channel != XPC_NET_CHANNEL);
|
|
|
|
switch(reason) {
|
|
case xpcMsgReceived: /* message received */
|
|
DBUG_ON(data == NULL);
|
|
|
|
xpnet_receive(partid, channel, (struct xpnet_message *) data);
|
|
break;
|
|
|
|
case xpcConnected: /* connection completed to a partition */
|
|
spin_lock_bh(&xpnet_broadcast_lock);
|
|
xpnet_broadcast_partitions |= 1UL << (partid -1 );
|
|
bp = xpnet_broadcast_partitions;
|
|
spin_unlock_bh(&xpnet_broadcast_lock);
|
|
|
|
netif_carrier_on(xpnet_device);
|
|
|
|
dev_dbg(xpnet, "%s connection created to partition %d; "
|
|
"xpnet_broadcast_partitions=0x%lx\n",
|
|
xpnet_device->name, partid, bp);
|
|
break;
|
|
|
|
default:
|
|
spin_lock_bh(&xpnet_broadcast_lock);
|
|
xpnet_broadcast_partitions &= ~(1UL << (partid -1 ));
|
|
bp = xpnet_broadcast_partitions;
|
|
spin_unlock_bh(&xpnet_broadcast_lock);
|
|
|
|
if (bp == 0) {
|
|
netif_carrier_off(xpnet_device);
|
|
}
|
|
|
|
dev_dbg(xpnet, "%s disconnected from partition %d; "
|
|
"xpnet_broadcast_partitions=0x%lx\n",
|
|
xpnet_device->name, partid, bp);
|
|
break;
|
|
|
|
}
|
|
}
|
|
|
|
|
|
static int
|
|
xpnet_dev_open(struct net_device *dev)
|
|
{
|
|
enum xpc_retval ret;
|
|
|
|
|
|
dev_dbg(xpnet, "calling xpc_connect(%d, 0x%p, NULL, %ld, %ld, %d, "
|
|
"%d)\n", XPC_NET_CHANNEL, xpnet_connection_activity,
|
|
XPNET_MSG_SIZE, XPNET_MSG_NENTRIES, XPNET_MAX_KTHREADS,
|
|
XPNET_MAX_IDLE_KTHREADS);
|
|
|
|
ret = xpc_connect(XPC_NET_CHANNEL, xpnet_connection_activity, NULL,
|
|
XPNET_MSG_SIZE, XPNET_MSG_NENTRIES,
|
|
XPNET_MAX_KTHREADS, XPNET_MAX_IDLE_KTHREADS);
|
|
if (ret != xpcSuccess) {
|
|
dev_err(xpnet, "ifconfig up of %s failed on XPC connect, "
|
|
"ret=%d\n", dev->name, ret);
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev_dbg(xpnet, "ifconfig up of %s; XPC connected\n", dev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
xpnet_dev_stop(struct net_device *dev)
|
|
{
|
|
xpc_disconnect(XPC_NET_CHANNEL);
|
|
|
|
dev_dbg(xpnet, "ifconfig down of %s; XPC disconnected\n", dev->name);
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int
|
|
xpnet_dev_change_mtu(struct net_device *dev, int new_mtu)
|
|
{
|
|
/* 68 comes from min TCP+IP+MAC header */
|
|
if ((new_mtu < 68) || (new_mtu > XPNET_MAX_MTU)) {
|
|
dev_err(xpnet, "ifconfig %s mtu %d failed; value must be "
|
|
"between 68 and %ld\n", dev->name, new_mtu,
|
|
XPNET_MAX_MTU);
|
|
return -EINVAL;
|
|
}
|
|
|
|
dev->mtu = new_mtu;
|
|
dev_dbg(xpnet, "ifconfig %s mtu set to %d\n", dev->name, new_mtu);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Required for the net_device structure.
|
|
*/
|
|
static int
|
|
xpnet_dev_set_config(struct net_device *dev, struct ifmap *new_map)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Return statistics to the caller.
|
|
*/
|
|
static struct net_device_stats *
|
|
xpnet_dev_get_stats(struct net_device *dev)
|
|
{
|
|
struct xpnet_dev_private *priv;
|
|
|
|
|
|
priv = (struct xpnet_dev_private *) dev->priv;
|
|
|
|
return &priv->stats;
|
|
}
|
|
|
|
|
|
/*
|
|
* Notification that the other end has received the message and
|
|
* DMA'd the skb information. At this point, they are done with
|
|
* our side. When all recipients are done processing, we
|
|
* release the skb and then release our pending message structure.
|
|
*/
|
|
static void
|
|
xpnet_send_completed(enum xpc_retval reason, partid_t partid, int channel,
|
|
void *__qm)
|
|
{
|
|
struct xpnet_pending_msg *queued_msg =
|
|
(struct xpnet_pending_msg *) __qm;
|
|
|
|
|
|
DBUG_ON(queued_msg == NULL);
|
|
|
|
dev_dbg(xpnet, "message to %d notified with reason %d\n",
|
|
partid, reason);
|
|
|
|
if (atomic_dec_return(&queued_msg->use_count) == 0) {
|
|
dev_dbg(xpnet, "all acks for skb->head=-x%p\n",
|
|
(void *) queued_msg->skb->head);
|
|
|
|
dev_kfree_skb_any(queued_msg->skb);
|
|
kfree(queued_msg);
|
|
}
|
|
}
|
|
|
|
|
|
/*
|
|
* Network layer has formatted a packet (skb) and is ready to place it
|
|
* "on the wire". Prepare and send an xpnet_message to all partitions
|
|
* which have connected with us and are targets of this packet.
|
|
*
|
|
* MAC-NOTE: For the XPNET driver, the MAC address contains the
|
|
* destination partition_id. If the destination partition id word
|
|
* is 0xff, this packet is to broadcast to all partitions.
|
|
*/
|
|
static int
|
|
xpnet_dev_hard_start_xmit(struct sk_buff *skb, struct net_device *dev)
|
|
{
|
|
struct xpnet_pending_msg *queued_msg;
|
|
enum xpc_retval ret;
|
|
struct xpnet_message *msg;
|
|
u64 start_addr, end_addr;
|
|
long dp;
|
|
u8 second_mac_octet;
|
|
partid_t dest_partid;
|
|
struct xpnet_dev_private *priv;
|
|
u16 embedded_bytes;
|
|
|
|
|
|
priv = (struct xpnet_dev_private *) dev->priv;
|
|
|
|
|
|
dev_dbg(xpnet, ">skb->head=0x%p skb->data=0x%p skb->tail=0x%p "
|
|
"skb->end=0x%p skb->len=%d\n", (void *) skb->head,
|
|
(void *) skb->data, (void *) skb->tail, (void *) skb->end,
|
|
skb->len);
|
|
|
|
|
|
/*
|
|
* The xpnet_pending_msg tracks how many outstanding
|
|
* xpc_send_notifies are relying on this skb. When none
|
|
* remain, release the skb.
|
|
*/
|
|
queued_msg = kmalloc(sizeof(struct xpnet_pending_msg), GFP_ATOMIC);
|
|
if (queued_msg == NULL) {
|
|
dev_warn(xpnet, "failed to kmalloc %ld bytes; dropping "
|
|
"packet\n", sizeof(struct xpnet_pending_msg));
|
|
|
|
priv->stats.tx_errors++;
|
|
|
|
return -ENOMEM;
|
|
}
|
|
|
|
|
|
/* get the beginning of the first cacheline and end of last */
|
|
start_addr = ((u64) skb->data & ~(L1_CACHE_BYTES - 1));
|
|
end_addr = L1_CACHE_ALIGN((u64) skb->tail);
|
|
|
|
/* calculate how many bytes to embed in the XPC message */
|
|
embedded_bytes = 0;
|
|
if (unlikely(skb->len <= XPNET_MSG_DATA_MAX)) {
|
|
/* skb->data does fit so embed */
|
|
embedded_bytes = skb->len;
|
|
}
|
|
|
|
|
|
/*
|
|
* Since the send occurs asynchronously, we set the count to one
|
|
* and begin sending. Any sends that happen to complete before
|
|
* we are done sending will not free the skb. We will be left
|
|
* with that task during exit. This also handles the case of
|
|
* a packet destined for a partition which is no longer up.
|
|
*/
|
|
atomic_set(&queued_msg->use_count, 1);
|
|
queued_msg->skb = skb;
|
|
|
|
|
|
second_mac_octet = skb->data[XPNET_PARTID_OCTET];
|
|
if (second_mac_octet == 0xff) {
|
|
/* we are being asked to broadcast to all partitions */
|
|
dp = xpnet_broadcast_partitions;
|
|
} else if (second_mac_octet != 0) {
|
|
dp = xpnet_broadcast_partitions &
|
|
(1UL << (second_mac_octet - 1));
|
|
} else {
|
|
/* 0 is an invalid partid. Ignore */
|
|
dp = 0;
|
|
}
|
|
dev_dbg(xpnet, "destination Partitions mask (dp) = 0x%lx\n", dp);
|
|
|
|
/*
|
|
* If we wanted to allow promiscous mode to work like an
|
|
* unswitched network, this would be a good point to OR in a
|
|
* mask of partitions which should be receiving all packets.
|
|
*/
|
|
|
|
/*
|
|
* Main send loop.
|
|
*/
|
|
for (dest_partid = 1; dp && dest_partid < XP_MAX_PARTITIONS;
|
|
dest_partid++) {
|
|
|
|
|
|
if (!(dp & (1UL << (dest_partid - 1)))) {
|
|
/* not destined for this partition */
|
|
continue;
|
|
}
|
|
|
|
/* remove this partition from the destinations mask */
|
|
dp &= ~(1UL << (dest_partid - 1));
|
|
|
|
|
|
/* found a partition to send to */
|
|
|
|
ret = xpc_allocate(dest_partid, XPC_NET_CHANNEL,
|
|
XPC_NOWAIT, (void **)&msg);
|
|
if (unlikely(ret != xpcSuccess)) {
|
|
continue;
|
|
}
|
|
|
|
msg->embedded_bytes = embedded_bytes;
|
|
if (unlikely(embedded_bytes != 0)) {
|
|
msg->version = XPNET_VERSION_EMBED;
|
|
dev_dbg(xpnet, "calling memcpy(0x%p, 0x%p, 0x%lx)\n",
|
|
&msg->data, skb->data, (size_t) embedded_bytes);
|
|
memcpy(&msg->data, skb->data, (size_t) embedded_bytes);
|
|
} else {
|
|
msg->version = XPNET_VERSION;
|
|
}
|
|
msg->magic = XPNET_MAGIC;
|
|
msg->size = end_addr - start_addr;
|
|
msg->leadin_ignore = (u64) skb->data - start_addr;
|
|
msg->tailout_ignore = end_addr - (u64) skb->tail;
|
|
msg->buf_pa = __pa(start_addr);
|
|
|
|
dev_dbg(xpnet, "sending XPC message to %d:%d\nmsg->buf_pa="
|
|
"0x%lx, msg->size=%u, msg->leadin_ignore=%u, "
|
|
"msg->tailout_ignore=%u\n", dest_partid,
|
|
XPC_NET_CHANNEL, msg->buf_pa, msg->size,
|
|
msg->leadin_ignore, msg->tailout_ignore);
|
|
|
|
|
|
atomic_inc(&queued_msg->use_count);
|
|
|
|
ret = xpc_send_notify(dest_partid, XPC_NET_CHANNEL, msg,
|
|
xpnet_send_completed, queued_msg);
|
|
if (unlikely(ret != xpcSuccess)) {
|
|
atomic_dec(&queued_msg->use_count);
|
|
continue;
|
|
}
|
|
|
|
}
|
|
|
|
if (atomic_dec_return(&queued_msg->use_count) == 0) {
|
|
dev_dbg(xpnet, "no partitions to receive packet destined for "
|
|
"%d\n", dest_partid);
|
|
|
|
|
|
dev_kfree_skb(skb);
|
|
kfree(queued_msg);
|
|
}
|
|
|
|
priv->stats.tx_packets++;
|
|
priv->stats.tx_bytes += skb->len;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* Deal with transmit timeouts coming from the network layer.
|
|
*/
|
|
static void
|
|
xpnet_dev_tx_timeout (struct net_device *dev)
|
|
{
|
|
struct xpnet_dev_private *priv;
|
|
|
|
|
|
priv = (struct xpnet_dev_private *) dev->priv;
|
|
|
|
priv->stats.tx_errors++;
|
|
return;
|
|
}
|
|
|
|
|
|
static int __init
|
|
xpnet_init(void)
|
|
{
|
|
int i;
|
|
u32 license_num;
|
|
int result = -ENOMEM;
|
|
|
|
|
|
if (!ia64_platform_is("sn2")) {
|
|
return -ENODEV;
|
|
}
|
|
|
|
dev_info(xpnet, "registering network device %s\n", XPNET_DEVICE_NAME);
|
|
|
|
/*
|
|
* use ether_setup() to init the majority of our device
|
|
* structure and then override the necessary pieces.
|
|
*/
|
|
xpnet_device = alloc_netdev(sizeof(struct xpnet_dev_private),
|
|
XPNET_DEVICE_NAME, ether_setup);
|
|
if (xpnet_device == NULL) {
|
|
return -ENOMEM;
|
|
}
|
|
|
|
netif_carrier_off(xpnet_device);
|
|
|
|
xpnet_device->mtu = XPNET_DEF_MTU;
|
|
xpnet_device->change_mtu = xpnet_dev_change_mtu;
|
|
xpnet_device->open = xpnet_dev_open;
|
|
xpnet_device->get_stats = xpnet_dev_get_stats;
|
|
xpnet_device->stop = xpnet_dev_stop;
|
|
xpnet_device->hard_start_xmit = xpnet_dev_hard_start_xmit;
|
|
xpnet_device->tx_timeout = xpnet_dev_tx_timeout;
|
|
xpnet_device->set_config = xpnet_dev_set_config;
|
|
|
|
/*
|
|
* Multicast assumes the LSB of the first octet is set for multicast
|
|
* MAC addresses. We chose the first octet of the MAC to be unlikely
|
|
* to collide with any vendor's officially issued MAC.
|
|
*/
|
|
xpnet_device->dev_addr[0] = 0xfe;
|
|
xpnet_device->dev_addr[XPNET_PARTID_OCTET] = sn_partition_id;
|
|
license_num = sn_partition_serial_number_val();
|
|
for (i = 3; i >= 0; i--) {
|
|
xpnet_device->dev_addr[XPNET_LICENSE_OCTET + i] =
|
|
license_num & 0xff;
|
|
license_num = license_num >> 8;
|
|
}
|
|
|
|
/*
|
|
* ether_setup() sets this to a multicast device. We are
|
|
* really not supporting multicast at this time.
|
|
*/
|
|
xpnet_device->flags &= ~IFF_MULTICAST;
|
|
|
|
/*
|
|
* No need to checksum as it is a DMA transfer. The BTE will
|
|
* report an error if the data is not retrievable and the
|
|
* packet will be dropped.
|
|
*/
|
|
xpnet_device->features = NETIF_F_NO_CSUM;
|
|
|
|
result = register_netdev(xpnet_device);
|
|
if (result != 0) {
|
|
free_netdev(xpnet_device);
|
|
}
|
|
|
|
return result;
|
|
}
|
|
module_init(xpnet_init);
|
|
|
|
|
|
static void __exit
|
|
xpnet_exit(void)
|
|
{
|
|
dev_info(xpnet, "unregistering network device %s\n",
|
|
xpnet_device[0].name);
|
|
|
|
unregister_netdev(xpnet_device);
|
|
|
|
free_netdev(xpnet_device);
|
|
}
|
|
module_exit(xpnet_exit);
|
|
|
|
|
|
MODULE_AUTHOR("Silicon Graphics, Inc.");
|
|
MODULE_DESCRIPTION("Cross Partition Network adapter (XPNET)");
|
|
MODULE_LICENSE("GPL");
|
|
|