1317 lines
32 KiB
C
1317 lines
32 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Microchip KSZ9477 switch driver main logic
|
|
*
|
|
* Copyright (C) 2017-2018 Microchip Technology Inc.
|
|
*/
|
|
|
|
#include <linux/delay.h>
|
|
#include <linux/export.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/platform_data/microchip-ksz.h>
|
|
#include <linux/phy.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/if_bridge.h>
|
|
#include <net/dsa.h>
|
|
#include <net/switchdev.h>
|
|
|
|
#include "ksz_priv.h"
|
|
#include "ksz_common.h"
|
|
#include "ksz9477_reg.h"
|
|
|
|
static const struct {
|
|
int index;
|
|
char string[ETH_GSTRING_LEN];
|
|
} ksz9477_mib_names[TOTAL_SWITCH_COUNTER_NUM] = {
|
|
{ 0x00, "rx_hi" },
|
|
{ 0x01, "rx_undersize" },
|
|
{ 0x02, "rx_fragments" },
|
|
{ 0x03, "rx_oversize" },
|
|
{ 0x04, "rx_jabbers" },
|
|
{ 0x05, "rx_symbol_err" },
|
|
{ 0x06, "rx_crc_err" },
|
|
{ 0x07, "rx_align_err" },
|
|
{ 0x08, "rx_mac_ctrl" },
|
|
{ 0x09, "rx_pause" },
|
|
{ 0x0A, "rx_bcast" },
|
|
{ 0x0B, "rx_mcast" },
|
|
{ 0x0C, "rx_ucast" },
|
|
{ 0x0D, "rx_64_or_less" },
|
|
{ 0x0E, "rx_65_127" },
|
|
{ 0x0F, "rx_128_255" },
|
|
{ 0x10, "rx_256_511" },
|
|
{ 0x11, "rx_512_1023" },
|
|
{ 0x12, "rx_1024_1522" },
|
|
{ 0x13, "rx_1523_2000" },
|
|
{ 0x14, "rx_2001" },
|
|
{ 0x15, "tx_hi" },
|
|
{ 0x16, "tx_late_col" },
|
|
{ 0x17, "tx_pause" },
|
|
{ 0x18, "tx_bcast" },
|
|
{ 0x19, "tx_mcast" },
|
|
{ 0x1A, "tx_ucast" },
|
|
{ 0x1B, "tx_deferred" },
|
|
{ 0x1C, "tx_total_col" },
|
|
{ 0x1D, "tx_exc_col" },
|
|
{ 0x1E, "tx_single_col" },
|
|
{ 0x1F, "tx_mult_col" },
|
|
{ 0x80, "rx_total" },
|
|
{ 0x81, "tx_total" },
|
|
{ 0x82, "rx_discards" },
|
|
{ 0x83, "tx_discards" },
|
|
};
|
|
|
|
static void ksz9477_cfg32(struct ksz_device *dev, u32 addr, u32 bits, bool set)
|
|
{
|
|
u32 data;
|
|
|
|
ksz_read32(dev, addr, &data);
|
|
if (set)
|
|
data |= bits;
|
|
else
|
|
data &= ~bits;
|
|
ksz_write32(dev, addr, data);
|
|
}
|
|
|
|
static void ksz9477_port_cfg32(struct ksz_device *dev, int port, int offset,
|
|
u32 bits, bool set)
|
|
{
|
|
u32 addr;
|
|
u32 data;
|
|
|
|
addr = PORT_CTRL_ADDR(port, offset);
|
|
ksz_read32(dev, addr, &data);
|
|
|
|
if (set)
|
|
data |= bits;
|
|
else
|
|
data &= ~bits;
|
|
|
|
ksz_write32(dev, addr, data);
|
|
}
|
|
|
|
static int ksz9477_wait_vlan_ctrl_ready(struct ksz_device *dev, u32 waiton,
|
|
int timeout)
|
|
{
|
|
u8 data;
|
|
|
|
do {
|
|
ksz_read8(dev, REG_SW_VLAN_CTRL, &data);
|
|
if (!(data & waiton))
|
|
break;
|
|
usleep_range(1, 10);
|
|
} while (timeout-- > 0);
|
|
|
|
if (timeout <= 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz9477_get_vlan_table(struct ksz_device *dev, u16 vid,
|
|
u32 *vlan_table)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&dev->vlan_mutex);
|
|
|
|
ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
|
|
ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_READ | VLAN_START);
|
|
|
|
/* wait to be cleared */
|
|
ret = ksz9477_wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
|
|
if (ret < 0) {
|
|
dev_dbg(dev->dev, "Failed to read vlan table\n");
|
|
goto exit;
|
|
}
|
|
|
|
ksz_read32(dev, REG_SW_VLAN_ENTRY__4, &vlan_table[0]);
|
|
ksz_read32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, &vlan_table[1]);
|
|
ksz_read32(dev, REG_SW_VLAN_ENTRY_PORTS__4, &vlan_table[2]);
|
|
|
|
ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
|
|
|
|
exit:
|
|
mutex_unlock(&dev->vlan_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ksz9477_set_vlan_table(struct ksz_device *dev, u16 vid,
|
|
u32 *vlan_table)
|
|
{
|
|
int ret;
|
|
|
|
mutex_lock(&dev->vlan_mutex);
|
|
|
|
ksz_write32(dev, REG_SW_VLAN_ENTRY__4, vlan_table[0]);
|
|
ksz_write32(dev, REG_SW_VLAN_ENTRY_UNTAG__4, vlan_table[1]);
|
|
ksz_write32(dev, REG_SW_VLAN_ENTRY_PORTS__4, vlan_table[2]);
|
|
|
|
ksz_write16(dev, REG_SW_VLAN_ENTRY_INDEX__2, vid & VLAN_INDEX_M);
|
|
ksz_write8(dev, REG_SW_VLAN_CTRL, VLAN_START | VLAN_WRITE);
|
|
|
|
/* wait to be cleared */
|
|
ret = ksz9477_wait_vlan_ctrl_ready(dev, VLAN_START, 1000);
|
|
if (ret < 0) {
|
|
dev_dbg(dev->dev, "Failed to write vlan table\n");
|
|
goto exit;
|
|
}
|
|
|
|
ksz_write8(dev, REG_SW_VLAN_CTRL, 0);
|
|
|
|
/* update vlan cache table */
|
|
dev->vlan_cache[vid].table[0] = vlan_table[0];
|
|
dev->vlan_cache[vid].table[1] = vlan_table[1];
|
|
dev->vlan_cache[vid].table[2] = vlan_table[2];
|
|
|
|
exit:
|
|
mutex_unlock(&dev->vlan_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ksz9477_read_table(struct ksz_device *dev, u32 *table)
|
|
{
|
|
ksz_read32(dev, REG_SW_ALU_VAL_A, &table[0]);
|
|
ksz_read32(dev, REG_SW_ALU_VAL_B, &table[1]);
|
|
ksz_read32(dev, REG_SW_ALU_VAL_C, &table[2]);
|
|
ksz_read32(dev, REG_SW_ALU_VAL_D, &table[3]);
|
|
}
|
|
|
|
static void ksz9477_write_table(struct ksz_device *dev, u32 *table)
|
|
{
|
|
ksz_write32(dev, REG_SW_ALU_VAL_A, table[0]);
|
|
ksz_write32(dev, REG_SW_ALU_VAL_B, table[1]);
|
|
ksz_write32(dev, REG_SW_ALU_VAL_C, table[2]);
|
|
ksz_write32(dev, REG_SW_ALU_VAL_D, table[3]);
|
|
}
|
|
|
|
static int ksz9477_wait_alu_ready(struct ksz_device *dev, u32 waiton,
|
|
int timeout)
|
|
{
|
|
u32 data;
|
|
|
|
do {
|
|
ksz_read32(dev, REG_SW_ALU_CTRL__4, &data);
|
|
if (!(data & waiton))
|
|
break;
|
|
usleep_range(1, 10);
|
|
} while (timeout-- > 0);
|
|
|
|
if (timeout <= 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz9477_wait_alu_sta_ready(struct ksz_device *dev, u32 waiton,
|
|
int timeout)
|
|
{
|
|
u32 data;
|
|
|
|
do {
|
|
ksz_read32(dev, REG_SW_ALU_STAT_CTRL__4, &data);
|
|
if (!(data & waiton))
|
|
break;
|
|
usleep_range(1, 10);
|
|
} while (timeout-- > 0);
|
|
|
|
if (timeout <= 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz9477_reset_switch(struct ksz_device *dev)
|
|
{
|
|
u8 data8;
|
|
u16 data16;
|
|
u32 data32;
|
|
|
|
/* reset switch */
|
|
ksz_cfg(dev, REG_SW_OPERATION, SW_RESET, true);
|
|
|
|
/* turn off SPI DO Edge select */
|
|
ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
|
|
data8 &= ~SPI_AUTO_EDGE_DETECTION;
|
|
ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
|
|
|
|
/* default configuration */
|
|
ksz_read8(dev, REG_SW_LUE_CTRL_1, &data8);
|
|
data8 = SW_AGING_ENABLE | SW_LINK_AUTO_AGING |
|
|
SW_SRC_ADDR_FILTER | SW_FLUSH_STP_TABLE | SW_FLUSH_MSTP_TABLE;
|
|
ksz_write8(dev, REG_SW_LUE_CTRL_1, data8);
|
|
|
|
/* disable interrupts */
|
|
ksz_write32(dev, REG_SW_INT_MASK__4, SWITCH_INT_MASK);
|
|
ksz_write32(dev, REG_SW_PORT_INT_MASK__4, 0x7F);
|
|
ksz_read32(dev, REG_SW_PORT_INT_STATUS__4, &data32);
|
|
|
|
/* set broadcast storm protection 10% rate */
|
|
ksz_read16(dev, REG_SW_MAC_CTRL_2, &data16);
|
|
data16 &= ~BROADCAST_STORM_RATE;
|
|
data16 |= (BROADCAST_STORM_VALUE * BROADCAST_STORM_PROT_RATE) / 100;
|
|
ksz_write16(dev, REG_SW_MAC_CTRL_2, data16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static enum dsa_tag_protocol ksz9477_get_tag_protocol(struct dsa_switch *ds,
|
|
int port)
|
|
{
|
|
return DSA_TAG_PROTO_KSZ;
|
|
}
|
|
|
|
static int ksz9477_phy_read16(struct dsa_switch *ds, int addr, int reg)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
u16 val = 0xffff;
|
|
|
|
/* No real PHY after this. Simulate the PHY.
|
|
* A fixed PHY can be setup in the device tree, but this function is
|
|
* still called for that port during initialization.
|
|
* For RGMII PHY there is no way to access it so the fixed PHY should
|
|
* be used. For SGMII PHY the supporting code will be added later.
|
|
*/
|
|
if (addr >= dev->phy_port_cnt) {
|
|
struct ksz_port *p = &dev->ports[addr];
|
|
|
|
switch (reg) {
|
|
case MII_BMCR:
|
|
val = 0x1140;
|
|
break;
|
|
case MII_BMSR:
|
|
val = 0x796d;
|
|
break;
|
|
case MII_PHYSID1:
|
|
val = 0x0022;
|
|
break;
|
|
case MII_PHYSID2:
|
|
val = 0x1631;
|
|
break;
|
|
case MII_ADVERTISE:
|
|
val = 0x05e1;
|
|
break;
|
|
case MII_LPA:
|
|
val = 0xc5e1;
|
|
break;
|
|
case MII_CTRL1000:
|
|
val = 0x0700;
|
|
break;
|
|
case MII_STAT1000:
|
|
if (p->phydev.speed == SPEED_1000)
|
|
val = 0x3800;
|
|
else
|
|
val = 0;
|
|
break;
|
|
}
|
|
} else {
|
|
ksz_pread16(dev, addr, 0x100 + (reg << 1), &val);
|
|
}
|
|
|
|
return val;
|
|
}
|
|
|
|
static int ksz9477_phy_write16(struct dsa_switch *ds, int addr, int reg,
|
|
u16 val)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
/* No real PHY after this. */
|
|
if (addr >= dev->phy_port_cnt)
|
|
return 0;
|
|
ksz_pwrite16(dev, addr, 0x100 + (reg << 1), val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ksz9477_get_strings(struct dsa_switch *ds, int port,
|
|
u32 stringset, uint8_t *buf)
|
|
{
|
|
int i;
|
|
|
|
if (stringset != ETH_SS_STATS)
|
|
return;
|
|
|
|
for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
|
|
memcpy(buf + i * ETH_GSTRING_LEN, ksz9477_mib_names[i].string,
|
|
ETH_GSTRING_LEN);
|
|
}
|
|
}
|
|
|
|
static void ksz_get_ethtool_stats(struct dsa_switch *ds, int port,
|
|
uint64_t *buf)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
int i;
|
|
u32 data;
|
|
int timeout;
|
|
|
|
mutex_lock(&dev->stats_mutex);
|
|
|
|
for (i = 0; i < TOTAL_SWITCH_COUNTER_NUM; i++) {
|
|
data = MIB_COUNTER_READ;
|
|
data |= ((ksz9477_mib_names[i].index & 0xFF) <<
|
|
MIB_COUNTER_INDEX_S);
|
|
ksz_pwrite32(dev, port, REG_PORT_MIB_CTRL_STAT__4, data);
|
|
|
|
timeout = 1000;
|
|
do {
|
|
ksz_pread32(dev, port, REG_PORT_MIB_CTRL_STAT__4,
|
|
&data);
|
|
usleep_range(1, 10);
|
|
if (!(data & MIB_COUNTER_READ))
|
|
break;
|
|
} while (timeout-- > 0);
|
|
|
|
/* failed to read MIB. get out of loop */
|
|
if (!timeout) {
|
|
dev_dbg(dev->dev, "Failed to get MIB\n");
|
|
break;
|
|
}
|
|
|
|
/* count resets upon read */
|
|
ksz_pread32(dev, port, REG_PORT_MIB_DATA, &data);
|
|
|
|
dev->mib_value[i] += (uint64_t)data;
|
|
buf[i] = dev->mib_value[i];
|
|
}
|
|
|
|
mutex_unlock(&dev->stats_mutex);
|
|
}
|
|
|
|
static void ksz9477_cfg_port_member(struct ksz_device *dev, int port,
|
|
u8 member)
|
|
{
|
|
ksz_pwrite32(dev, port, REG_PORT_VLAN_MEMBERSHIP__4, member);
|
|
dev->ports[port].member = member;
|
|
}
|
|
|
|
static void ksz9477_port_stp_state_set(struct dsa_switch *ds, int port,
|
|
u8 state)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
struct ksz_port *p = &dev->ports[port];
|
|
u8 data;
|
|
int member = -1;
|
|
|
|
ksz_pread8(dev, port, P_STP_CTRL, &data);
|
|
data &= ~(PORT_TX_ENABLE | PORT_RX_ENABLE | PORT_LEARN_DISABLE);
|
|
|
|
switch (state) {
|
|
case BR_STATE_DISABLED:
|
|
data |= PORT_LEARN_DISABLE;
|
|
if (port != dev->cpu_port)
|
|
member = 0;
|
|
break;
|
|
case BR_STATE_LISTENING:
|
|
data |= (PORT_RX_ENABLE | PORT_LEARN_DISABLE);
|
|
if (port != dev->cpu_port &&
|
|
p->stp_state == BR_STATE_DISABLED)
|
|
member = dev->host_mask | p->vid_member;
|
|
break;
|
|
case BR_STATE_LEARNING:
|
|
data |= PORT_RX_ENABLE;
|
|
break;
|
|
case BR_STATE_FORWARDING:
|
|
data |= (PORT_TX_ENABLE | PORT_RX_ENABLE);
|
|
|
|
/* This function is also used internally. */
|
|
if (port == dev->cpu_port)
|
|
break;
|
|
|
|
member = dev->host_mask | p->vid_member;
|
|
|
|
/* Port is a member of a bridge. */
|
|
if (dev->br_member & (1 << port)) {
|
|
dev->member |= (1 << port);
|
|
member = dev->member;
|
|
}
|
|
break;
|
|
case BR_STATE_BLOCKING:
|
|
data |= PORT_LEARN_DISABLE;
|
|
if (port != dev->cpu_port &&
|
|
p->stp_state == BR_STATE_DISABLED)
|
|
member = dev->host_mask | p->vid_member;
|
|
break;
|
|
default:
|
|
dev_err(ds->dev, "invalid STP state: %d\n", state);
|
|
return;
|
|
}
|
|
|
|
ksz_pwrite8(dev, port, P_STP_CTRL, data);
|
|
p->stp_state = state;
|
|
if (data & PORT_RX_ENABLE)
|
|
dev->rx_ports |= (1 << port);
|
|
else
|
|
dev->rx_ports &= ~(1 << port);
|
|
if (data & PORT_TX_ENABLE)
|
|
dev->tx_ports |= (1 << port);
|
|
else
|
|
dev->tx_ports &= ~(1 << port);
|
|
|
|
/* Port membership may share register with STP state. */
|
|
if (member >= 0 && member != p->member)
|
|
ksz9477_cfg_port_member(dev, port, (u8)member);
|
|
|
|
/* Check if forwarding needs to be updated. */
|
|
if (state != BR_STATE_FORWARDING) {
|
|
if (dev->br_member & (1 << port))
|
|
dev->member &= ~(1 << port);
|
|
}
|
|
|
|
/* When topology has changed the function ksz_update_port_member
|
|
* should be called to modify port forwarding behavior. However
|
|
* as the offload_fwd_mark indication cannot be reported here
|
|
* the switch forwarding function is not enabled.
|
|
*/
|
|
}
|
|
|
|
static void ksz9477_flush_dyn_mac_table(struct ksz_device *dev, int port)
|
|
{
|
|
u8 data;
|
|
|
|
ksz_read8(dev, REG_SW_LUE_CTRL_2, &data);
|
|
data &= ~(SW_FLUSH_OPTION_M << SW_FLUSH_OPTION_S);
|
|
data |= (SW_FLUSH_OPTION_DYN_MAC << SW_FLUSH_OPTION_S);
|
|
ksz_write8(dev, REG_SW_LUE_CTRL_2, data);
|
|
if (port < dev->mib_port_cnt) {
|
|
/* flush individual port */
|
|
ksz_pread8(dev, port, P_STP_CTRL, &data);
|
|
if (!(data & PORT_LEARN_DISABLE))
|
|
ksz_pwrite8(dev, port, P_STP_CTRL,
|
|
data | PORT_LEARN_DISABLE);
|
|
ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_DYN_MAC_TABLE, true);
|
|
ksz_pwrite8(dev, port, P_STP_CTRL, data);
|
|
} else {
|
|
/* flush all */
|
|
ksz_cfg(dev, S_FLUSH_TABLE_CTRL, SW_FLUSH_STP_TABLE, true);
|
|
}
|
|
}
|
|
|
|
static int ksz9477_port_vlan_filtering(struct dsa_switch *ds, int port,
|
|
bool flag)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (flag) {
|
|
ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
|
|
PORT_VLAN_LOOKUP_VID_0, true);
|
|
ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
|
|
true);
|
|
ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, true);
|
|
} else {
|
|
ksz_cfg(dev, REG_SW_LUE_CTRL_0, SW_VLAN_ENABLE, false);
|
|
ksz9477_cfg32(dev, REG_SW_QM_CTRL__4, UNICAST_VLAN_BOUNDARY,
|
|
false);
|
|
ksz_port_cfg(dev, port, REG_PORT_LUE_CTRL,
|
|
PORT_VLAN_LOOKUP_VID_0, false);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ksz9477_port_vlan_add(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
u32 vlan_table[3];
|
|
u16 vid;
|
|
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
|
|
|
|
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
|
|
if (ksz9477_get_vlan_table(dev, vid, vlan_table)) {
|
|
dev_dbg(dev->dev, "Failed to get vlan table\n");
|
|
return;
|
|
}
|
|
|
|
vlan_table[0] = VLAN_VALID | (vid & VLAN_FID_M);
|
|
if (untagged)
|
|
vlan_table[1] |= BIT(port);
|
|
else
|
|
vlan_table[1] &= ~BIT(port);
|
|
vlan_table[1] &= ~(BIT(dev->cpu_port));
|
|
|
|
vlan_table[2] |= BIT(port) | BIT(dev->cpu_port);
|
|
|
|
if (ksz9477_set_vlan_table(dev, vid, vlan_table)) {
|
|
dev_dbg(dev->dev, "Failed to set vlan table\n");
|
|
return;
|
|
}
|
|
|
|
/* change PVID */
|
|
if (vlan->flags & BRIDGE_VLAN_INFO_PVID)
|
|
ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, vid);
|
|
}
|
|
}
|
|
|
|
static int ksz9477_port_vlan_del(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_vlan *vlan)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED;
|
|
u32 vlan_table[3];
|
|
u16 vid;
|
|
u16 pvid;
|
|
|
|
ksz_pread16(dev, port, REG_PORT_DEFAULT_VID, &pvid);
|
|
pvid = pvid & 0xFFF;
|
|
|
|
for (vid = vlan->vid_begin; vid <= vlan->vid_end; vid++) {
|
|
if (ksz9477_get_vlan_table(dev, vid, vlan_table)) {
|
|
dev_dbg(dev->dev, "Failed to get vlan table\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
vlan_table[2] &= ~BIT(port);
|
|
|
|
if (pvid == vid)
|
|
pvid = 1;
|
|
|
|
if (untagged)
|
|
vlan_table[1] &= ~BIT(port);
|
|
|
|
if (ksz9477_set_vlan_table(dev, vid, vlan_table)) {
|
|
dev_dbg(dev->dev, "Failed to set vlan table\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
ksz_pwrite16(dev, port, REG_PORT_DEFAULT_VID, pvid);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ksz9477_port_fdb_add(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
u32 alu_table[4];
|
|
u32 data;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&dev->alu_mutex);
|
|
|
|
/* find any entry with mac & vid */
|
|
data = vid << ALU_FID_INDEX_S;
|
|
data |= ((addr[0] << 8) | addr[1]);
|
|
ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
|
|
|
|
data = ((addr[2] << 24) | (addr[3] << 16));
|
|
data |= ((addr[4] << 8) | addr[5]);
|
|
ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
|
|
|
|
/* start read operation */
|
|
ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
|
|
|
|
/* wait to be finished */
|
|
ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
|
|
if (ret < 0) {
|
|
dev_dbg(dev->dev, "Failed to read ALU\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* read ALU entry */
|
|
ksz9477_read_table(dev, alu_table);
|
|
|
|
/* update ALU entry */
|
|
alu_table[0] = ALU_V_STATIC_VALID;
|
|
alu_table[1] |= BIT(port);
|
|
if (vid)
|
|
alu_table[1] |= ALU_V_USE_FID;
|
|
alu_table[2] = (vid << ALU_V_FID_S);
|
|
alu_table[2] |= ((addr[0] << 8) | addr[1]);
|
|
alu_table[3] = ((addr[2] << 24) | (addr[3] << 16));
|
|
alu_table[3] |= ((addr[4] << 8) | addr[5]);
|
|
|
|
ksz9477_write_table(dev, alu_table);
|
|
|
|
ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
|
|
|
|
/* wait to be finished */
|
|
ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
|
|
if (ret < 0)
|
|
dev_dbg(dev->dev, "Failed to write ALU\n");
|
|
|
|
exit:
|
|
mutex_unlock(&dev->alu_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ksz9477_port_fdb_del(struct dsa_switch *ds, int port,
|
|
const unsigned char *addr, u16 vid)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
u32 alu_table[4];
|
|
u32 data;
|
|
int ret = 0;
|
|
|
|
mutex_lock(&dev->alu_mutex);
|
|
|
|
/* read any entry with mac & vid */
|
|
data = vid << ALU_FID_INDEX_S;
|
|
data |= ((addr[0] << 8) | addr[1]);
|
|
ksz_write32(dev, REG_SW_ALU_INDEX_0, data);
|
|
|
|
data = ((addr[2] << 24) | (addr[3] << 16));
|
|
data |= ((addr[4] << 8) | addr[5]);
|
|
ksz_write32(dev, REG_SW_ALU_INDEX_1, data);
|
|
|
|
/* start read operation */
|
|
ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_READ | ALU_START);
|
|
|
|
/* wait to be finished */
|
|
ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
|
|
if (ret < 0) {
|
|
dev_dbg(dev->dev, "Failed to read ALU\n");
|
|
goto exit;
|
|
}
|
|
|
|
ksz_read32(dev, REG_SW_ALU_VAL_A, &alu_table[0]);
|
|
if (alu_table[0] & ALU_V_STATIC_VALID) {
|
|
ksz_read32(dev, REG_SW_ALU_VAL_B, &alu_table[1]);
|
|
ksz_read32(dev, REG_SW_ALU_VAL_C, &alu_table[2]);
|
|
ksz_read32(dev, REG_SW_ALU_VAL_D, &alu_table[3]);
|
|
|
|
/* clear forwarding port */
|
|
alu_table[2] &= ~BIT(port);
|
|
|
|
/* if there is no port to forward, clear table */
|
|
if ((alu_table[2] & ALU_V_PORT_MAP) == 0) {
|
|
alu_table[0] = 0;
|
|
alu_table[1] = 0;
|
|
alu_table[2] = 0;
|
|
alu_table[3] = 0;
|
|
}
|
|
} else {
|
|
alu_table[0] = 0;
|
|
alu_table[1] = 0;
|
|
alu_table[2] = 0;
|
|
alu_table[3] = 0;
|
|
}
|
|
|
|
ksz9477_write_table(dev, alu_table);
|
|
|
|
ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_WRITE | ALU_START);
|
|
|
|
/* wait to be finished */
|
|
ret = ksz9477_wait_alu_ready(dev, ALU_START, 1000);
|
|
if (ret < 0)
|
|
dev_dbg(dev->dev, "Failed to write ALU\n");
|
|
|
|
exit:
|
|
mutex_unlock(&dev->alu_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ksz9477_convert_alu(struct alu_struct *alu, u32 *alu_table)
|
|
{
|
|
alu->is_static = !!(alu_table[0] & ALU_V_STATIC_VALID);
|
|
alu->is_src_filter = !!(alu_table[0] & ALU_V_SRC_FILTER);
|
|
alu->is_dst_filter = !!(alu_table[0] & ALU_V_DST_FILTER);
|
|
alu->prio_age = (alu_table[0] >> ALU_V_PRIO_AGE_CNT_S) &
|
|
ALU_V_PRIO_AGE_CNT_M;
|
|
alu->mstp = alu_table[0] & ALU_V_MSTP_M;
|
|
|
|
alu->is_override = !!(alu_table[1] & ALU_V_OVERRIDE);
|
|
alu->is_use_fid = !!(alu_table[1] & ALU_V_USE_FID);
|
|
alu->port_forward = alu_table[1] & ALU_V_PORT_MAP;
|
|
|
|
alu->fid = (alu_table[2] >> ALU_V_FID_S) & ALU_V_FID_M;
|
|
|
|
alu->mac[0] = (alu_table[2] >> 8) & 0xFF;
|
|
alu->mac[1] = alu_table[2] & 0xFF;
|
|
alu->mac[2] = (alu_table[3] >> 24) & 0xFF;
|
|
alu->mac[3] = (alu_table[3] >> 16) & 0xFF;
|
|
alu->mac[4] = (alu_table[3] >> 8) & 0xFF;
|
|
alu->mac[5] = alu_table[3] & 0xFF;
|
|
}
|
|
|
|
static int ksz9477_port_fdb_dump(struct dsa_switch *ds, int port,
|
|
dsa_fdb_dump_cb_t *cb, void *data)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
int ret = 0;
|
|
u32 ksz_data;
|
|
u32 alu_table[4];
|
|
struct alu_struct alu;
|
|
int timeout;
|
|
|
|
mutex_lock(&dev->alu_mutex);
|
|
|
|
/* start ALU search */
|
|
ksz_write32(dev, REG_SW_ALU_CTRL__4, ALU_START | ALU_SEARCH);
|
|
|
|
do {
|
|
timeout = 1000;
|
|
do {
|
|
ksz_read32(dev, REG_SW_ALU_CTRL__4, &ksz_data);
|
|
if ((ksz_data & ALU_VALID) || !(ksz_data & ALU_START))
|
|
break;
|
|
usleep_range(1, 10);
|
|
} while (timeout-- > 0);
|
|
|
|
if (!timeout) {
|
|
dev_dbg(dev->dev, "Failed to search ALU\n");
|
|
ret = -ETIMEDOUT;
|
|
goto exit;
|
|
}
|
|
|
|
/* read ALU table */
|
|
ksz9477_read_table(dev, alu_table);
|
|
|
|
ksz9477_convert_alu(&alu, alu_table);
|
|
|
|
if (alu.port_forward & BIT(port)) {
|
|
ret = cb(alu.mac, alu.fid, alu.is_static, data);
|
|
if (ret)
|
|
goto exit;
|
|
}
|
|
} while (ksz_data & ALU_START);
|
|
|
|
exit:
|
|
|
|
/* stop ALU search */
|
|
ksz_write32(dev, REG_SW_ALU_CTRL__4, 0);
|
|
|
|
mutex_unlock(&dev->alu_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void ksz9477_port_mdb_add(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
u32 static_table[4];
|
|
u32 data;
|
|
int index;
|
|
u32 mac_hi, mac_lo;
|
|
|
|
mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
|
|
mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
|
|
mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
|
|
|
|
mutex_lock(&dev->alu_mutex);
|
|
|
|
for (index = 0; index < dev->num_statics; index++) {
|
|
/* find empty slot first */
|
|
data = (index << ALU_STAT_INDEX_S) |
|
|
ALU_STAT_READ | ALU_STAT_START;
|
|
ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
|
|
|
|
/* wait to be finished */
|
|
if (ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0) {
|
|
dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* read ALU static table */
|
|
ksz9477_read_table(dev, static_table);
|
|
|
|
if (static_table[0] & ALU_V_STATIC_VALID) {
|
|
/* check this has same vid & mac address */
|
|
if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
|
|
((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
|
|
static_table[3] == mac_lo) {
|
|
/* found matching one */
|
|
break;
|
|
}
|
|
} else {
|
|
/* found empty one */
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* no available entry */
|
|
if (index == dev->num_statics)
|
|
goto exit;
|
|
|
|
/* add entry */
|
|
static_table[0] = ALU_V_STATIC_VALID;
|
|
static_table[1] |= BIT(port);
|
|
if (mdb->vid)
|
|
static_table[1] |= ALU_V_USE_FID;
|
|
static_table[2] = (mdb->vid << ALU_V_FID_S);
|
|
static_table[2] |= mac_hi;
|
|
static_table[3] = mac_lo;
|
|
|
|
ksz9477_write_table(dev, static_table);
|
|
|
|
data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
|
|
ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
|
|
|
|
/* wait to be finished */
|
|
if (ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000) < 0)
|
|
dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
|
|
|
|
exit:
|
|
mutex_unlock(&dev->alu_mutex);
|
|
}
|
|
|
|
static int ksz9477_port_mdb_del(struct dsa_switch *ds, int port,
|
|
const struct switchdev_obj_port_mdb *mdb)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
u32 static_table[4];
|
|
u32 data;
|
|
int index;
|
|
int ret = 0;
|
|
u32 mac_hi, mac_lo;
|
|
|
|
mac_hi = ((mdb->addr[0] << 8) | mdb->addr[1]);
|
|
mac_lo = ((mdb->addr[2] << 24) | (mdb->addr[3] << 16));
|
|
mac_lo |= ((mdb->addr[4] << 8) | mdb->addr[5]);
|
|
|
|
mutex_lock(&dev->alu_mutex);
|
|
|
|
for (index = 0; index < dev->num_statics; index++) {
|
|
/* find empty slot first */
|
|
data = (index << ALU_STAT_INDEX_S) |
|
|
ALU_STAT_READ | ALU_STAT_START;
|
|
ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
|
|
|
|
/* wait to be finished */
|
|
ret = ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
|
|
if (ret < 0) {
|
|
dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
|
|
goto exit;
|
|
}
|
|
|
|
/* read ALU static table */
|
|
ksz9477_read_table(dev, static_table);
|
|
|
|
if (static_table[0] & ALU_V_STATIC_VALID) {
|
|
/* check this has same vid & mac address */
|
|
|
|
if (((static_table[2] >> ALU_V_FID_S) == mdb->vid) &&
|
|
((static_table[2] & ALU_V_MAC_ADDR_HI) == mac_hi) &&
|
|
static_table[3] == mac_lo) {
|
|
/* found matching one */
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
/* no available entry */
|
|
if (index == dev->num_statics)
|
|
goto exit;
|
|
|
|
/* clear port */
|
|
static_table[1] &= ~BIT(port);
|
|
|
|
if ((static_table[1] & ALU_V_PORT_MAP) == 0) {
|
|
/* delete entry */
|
|
static_table[0] = 0;
|
|
static_table[1] = 0;
|
|
static_table[2] = 0;
|
|
static_table[3] = 0;
|
|
}
|
|
|
|
ksz9477_write_table(dev, static_table);
|
|
|
|
data = (index << ALU_STAT_INDEX_S) | ALU_STAT_START;
|
|
ksz_write32(dev, REG_SW_ALU_STAT_CTRL__4, data);
|
|
|
|
/* wait to be finished */
|
|
ret = ksz9477_wait_alu_sta_ready(dev, ALU_STAT_START, 1000);
|
|
if (ret < 0)
|
|
dev_dbg(dev->dev, "Failed to read ALU STATIC\n");
|
|
|
|
exit:
|
|
mutex_unlock(&dev->alu_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int ksz9477_port_mirror_add(struct dsa_switch *ds, int port,
|
|
struct dsa_mall_mirror_tc_entry *mirror,
|
|
bool ingress)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
|
|
if (ingress)
|
|
ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, true);
|
|
else
|
|
ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, true);
|
|
|
|
ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_SNIFFER, false);
|
|
|
|
/* configure mirror port */
|
|
ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
|
|
PORT_MIRROR_SNIFFER, true);
|
|
|
|
ksz_cfg(dev, S_MIRROR_CTRL, SW_MIRROR_RX_TX, false);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ksz9477_port_mirror_del(struct dsa_switch *ds, int port,
|
|
struct dsa_mall_mirror_tc_entry *mirror)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
u8 data;
|
|
|
|
if (mirror->ingress)
|
|
ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_RX, false);
|
|
else
|
|
ksz_port_cfg(dev, port, P_MIRROR_CTRL, PORT_MIRROR_TX, false);
|
|
|
|
ksz_pread8(dev, port, P_MIRROR_CTRL, &data);
|
|
|
|
if (!(data & (PORT_MIRROR_RX | PORT_MIRROR_TX)))
|
|
ksz_port_cfg(dev, mirror->to_local_port, P_MIRROR_CTRL,
|
|
PORT_MIRROR_SNIFFER, false);
|
|
}
|
|
|
|
static void ksz9477_port_setup(struct ksz_device *dev, int port, bool cpu_port)
|
|
{
|
|
u8 data8;
|
|
u8 member;
|
|
u16 data16;
|
|
struct ksz_port *p = &dev->ports[port];
|
|
|
|
/* enable tag tail for host port */
|
|
if (cpu_port)
|
|
ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_TAIL_TAG_ENABLE,
|
|
true);
|
|
|
|
ksz_port_cfg(dev, port, REG_PORT_CTRL_0, PORT_MAC_LOOPBACK, false);
|
|
|
|
/* set back pressure */
|
|
ksz_port_cfg(dev, port, REG_PORT_MAC_CTRL_1, PORT_BACK_PRESSURE, true);
|
|
|
|
/* enable broadcast storm limit */
|
|
ksz_port_cfg(dev, port, P_BCAST_STORM_CTRL, PORT_BROADCAST_STORM, true);
|
|
|
|
/* disable DiffServ priority */
|
|
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_DIFFSERV_PRIO_ENABLE, false);
|
|
|
|
/* replace priority */
|
|
ksz_port_cfg(dev, port, REG_PORT_MRI_MAC_CTRL, PORT_USER_PRIO_CEILING,
|
|
false);
|
|
ksz9477_port_cfg32(dev, port, REG_PORT_MTI_QUEUE_CTRL_0__4,
|
|
MTI_PVID_REPLACE, false);
|
|
|
|
/* enable 802.1p priority */
|
|
ksz_port_cfg(dev, port, P_PRIO_CTRL, PORT_802_1P_PRIO_ENABLE, true);
|
|
|
|
if (port < dev->phy_port_cnt) {
|
|
/* do not force flow control */
|
|
ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
|
|
PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
|
|
false);
|
|
|
|
} else {
|
|
/* force flow control */
|
|
ksz_port_cfg(dev, port, REG_PORT_CTRL_0,
|
|
PORT_FORCE_TX_FLOW_CTRL | PORT_FORCE_RX_FLOW_CTRL,
|
|
true);
|
|
|
|
/* configure MAC to 1G & RGMII mode */
|
|
ksz_pread8(dev, port, REG_PORT_XMII_CTRL_1, &data8);
|
|
data8 &= ~PORT_MII_NOT_1GBIT;
|
|
data8 &= ~PORT_MII_SEL_M;
|
|
switch (dev->interface) {
|
|
case PHY_INTERFACE_MODE_MII:
|
|
data8 |= PORT_MII_NOT_1GBIT;
|
|
data8 |= PORT_MII_SEL;
|
|
p->phydev.speed = SPEED_100;
|
|
break;
|
|
case PHY_INTERFACE_MODE_RMII:
|
|
data8 |= PORT_MII_NOT_1GBIT;
|
|
data8 |= PORT_RMII_SEL;
|
|
p->phydev.speed = SPEED_100;
|
|
break;
|
|
case PHY_INTERFACE_MODE_GMII:
|
|
data8 |= PORT_GMII_SEL;
|
|
p->phydev.speed = SPEED_1000;
|
|
break;
|
|
default:
|
|
data8 &= ~PORT_RGMII_ID_IG_ENABLE;
|
|
data8 &= ~PORT_RGMII_ID_EG_ENABLE;
|
|
if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
dev->interface == PHY_INTERFACE_MODE_RGMII_RXID)
|
|
data8 |= PORT_RGMII_ID_IG_ENABLE;
|
|
if (dev->interface == PHY_INTERFACE_MODE_RGMII_ID ||
|
|
dev->interface == PHY_INTERFACE_MODE_RGMII_TXID)
|
|
data8 |= PORT_RGMII_ID_EG_ENABLE;
|
|
data8 |= PORT_RGMII_SEL;
|
|
p->phydev.speed = SPEED_1000;
|
|
break;
|
|
}
|
|
ksz_pwrite8(dev, port, REG_PORT_XMII_CTRL_1, data8);
|
|
p->phydev.duplex = 1;
|
|
}
|
|
if (cpu_port) {
|
|
member = dev->port_mask;
|
|
dev->on_ports = dev->host_mask;
|
|
dev->live_ports = dev->host_mask;
|
|
} else {
|
|
member = dev->host_mask | p->vid_member;
|
|
dev->on_ports |= (1 << port);
|
|
|
|
/* Link was detected before port is enabled. */
|
|
if (p->phydev.link)
|
|
dev->live_ports |= (1 << port);
|
|
}
|
|
ksz9477_cfg_port_member(dev, port, member);
|
|
|
|
/* clear pending interrupts */
|
|
if (port < dev->phy_port_cnt)
|
|
ksz_pread16(dev, port, REG_PORT_PHY_INT_ENABLE, &data16);
|
|
}
|
|
|
|
static void ksz9477_config_cpu_port(struct dsa_switch *ds)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
struct ksz_port *p;
|
|
int i;
|
|
|
|
ds->num_ports = dev->port_cnt;
|
|
|
|
for (i = 0; i < dev->port_cnt; i++) {
|
|
if (dsa_is_cpu_port(ds, i) && (dev->cpu_ports & (1 << i))) {
|
|
dev->cpu_port = i;
|
|
dev->host_mask = (1 << dev->cpu_port);
|
|
dev->port_mask |= dev->host_mask;
|
|
|
|
/* enable cpu port */
|
|
ksz9477_port_setup(dev, i, true);
|
|
p = &dev->ports[dev->cpu_port];
|
|
p->vid_member = dev->port_mask;
|
|
p->on = 1;
|
|
}
|
|
}
|
|
|
|
dev->member = dev->host_mask;
|
|
|
|
for (i = 0; i < dev->mib_port_cnt; i++) {
|
|
if (i == dev->cpu_port)
|
|
continue;
|
|
p = &dev->ports[i];
|
|
|
|
/* Initialize to non-zero so that ksz_cfg_port_member() will
|
|
* be called.
|
|
*/
|
|
p->vid_member = (1 << i);
|
|
p->member = dev->port_mask;
|
|
ksz9477_port_stp_state_set(ds, i, BR_STATE_DISABLED);
|
|
p->on = 1;
|
|
if (i < dev->phy_port_cnt)
|
|
p->phy = 1;
|
|
if (dev->chip_id == 0x00947700 && i == 6) {
|
|
p->sgmii = 1;
|
|
|
|
/* SGMII PHY detection code is not implemented yet. */
|
|
p->phy = 0;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int ksz9477_setup(struct dsa_switch *ds)
|
|
{
|
|
struct ksz_device *dev = ds->priv;
|
|
int ret = 0;
|
|
|
|
dev->vlan_cache = devm_kcalloc(dev->dev, sizeof(struct vlan_table),
|
|
dev->num_vlans, GFP_KERNEL);
|
|
if (!dev->vlan_cache)
|
|
return -ENOMEM;
|
|
|
|
ret = ksz9477_reset_switch(dev);
|
|
if (ret) {
|
|
dev_err(ds->dev, "failed to reset switch\n");
|
|
return ret;
|
|
}
|
|
|
|
/* accept packet up to 2000bytes */
|
|
ksz_cfg(dev, REG_SW_MAC_CTRL_1, SW_LEGAL_PACKET_DISABLE, true);
|
|
|
|
ksz9477_config_cpu_port(ds);
|
|
|
|
ksz_cfg(dev, REG_SW_MAC_CTRL_1, MULTICAST_STORM_DISABLE, true);
|
|
|
|
/* queue based egress rate limit */
|
|
ksz_cfg(dev, REG_SW_MAC_CTRL_5, SW_OUT_RATE_LIMIT_QUEUE_BASED, true);
|
|
|
|
/* start switch */
|
|
ksz_cfg(dev, REG_SW_OPERATION, SW_START, true);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dsa_switch_ops ksz9477_switch_ops = {
|
|
.get_tag_protocol = ksz9477_get_tag_protocol,
|
|
.setup = ksz9477_setup,
|
|
.phy_read = ksz9477_phy_read16,
|
|
.phy_write = ksz9477_phy_write16,
|
|
.port_enable = ksz_enable_port,
|
|
.port_disable = ksz_disable_port,
|
|
.get_strings = ksz9477_get_strings,
|
|
.get_ethtool_stats = ksz_get_ethtool_stats,
|
|
.get_sset_count = ksz_sset_count,
|
|
.port_bridge_join = ksz_port_bridge_join,
|
|
.port_bridge_leave = ksz_port_bridge_leave,
|
|
.port_stp_state_set = ksz9477_port_stp_state_set,
|
|
.port_fast_age = ksz_port_fast_age,
|
|
.port_vlan_filtering = ksz9477_port_vlan_filtering,
|
|
.port_vlan_prepare = ksz_port_vlan_prepare,
|
|
.port_vlan_add = ksz9477_port_vlan_add,
|
|
.port_vlan_del = ksz9477_port_vlan_del,
|
|
.port_fdb_dump = ksz9477_port_fdb_dump,
|
|
.port_fdb_add = ksz9477_port_fdb_add,
|
|
.port_fdb_del = ksz9477_port_fdb_del,
|
|
.port_mdb_prepare = ksz_port_mdb_prepare,
|
|
.port_mdb_add = ksz9477_port_mdb_add,
|
|
.port_mdb_del = ksz9477_port_mdb_del,
|
|
.port_mirror_add = ksz9477_port_mirror_add,
|
|
.port_mirror_del = ksz9477_port_mirror_del,
|
|
};
|
|
|
|
static u32 ksz9477_get_port_addr(int port, int offset)
|
|
{
|
|
return PORT_CTRL_ADDR(port, offset);
|
|
}
|
|
|
|
static int ksz9477_switch_detect(struct ksz_device *dev)
|
|
{
|
|
u8 data8;
|
|
u32 id32;
|
|
int ret;
|
|
|
|
/* turn off SPI DO Edge select */
|
|
ret = ksz_read8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, &data8);
|
|
if (ret)
|
|
return ret;
|
|
|
|
data8 &= ~SPI_AUTO_EDGE_DETECTION;
|
|
ret = ksz_write8(dev, REG_SW_GLOBAL_SERIAL_CTRL_0, data8);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* read chip id */
|
|
ret = ksz_read32(dev, REG_CHIP_ID0__1, &id32);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* Number of ports can be reduced depending on chip. */
|
|
dev->mib_port_cnt = TOTAL_PORT_NUM;
|
|
dev->phy_port_cnt = 5;
|
|
|
|
dev->chip_id = id32;
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct ksz_chip_data {
|
|
u32 chip_id;
|
|
const char *dev_name;
|
|
int num_vlans;
|
|
int num_alus;
|
|
int num_statics;
|
|
int cpu_ports;
|
|
int port_cnt;
|
|
};
|
|
|
|
static const struct ksz_chip_data ksz9477_switch_chips[] = {
|
|
{
|
|
.chip_id = 0x00947700,
|
|
.dev_name = "KSZ9477",
|
|
.num_vlans = 4096,
|
|
.num_alus = 4096,
|
|
.num_statics = 16,
|
|
.cpu_ports = 0x7F, /* can be configured as cpu port */
|
|
.port_cnt = 7, /* total physical port count */
|
|
},
|
|
{
|
|
.chip_id = 0x00989700,
|
|
.dev_name = "KSZ9897",
|
|
.num_vlans = 4096,
|
|
.num_alus = 4096,
|
|
.num_statics = 16,
|
|
.cpu_ports = 0x7F, /* can be configured as cpu port */
|
|
.port_cnt = 7, /* total physical port count */
|
|
},
|
|
};
|
|
|
|
static int ksz9477_switch_init(struct ksz_device *dev)
|
|
{
|
|
int i;
|
|
|
|
dev->ds->ops = &ksz9477_switch_ops;
|
|
|
|
for (i = 0; i < ARRAY_SIZE(ksz9477_switch_chips); i++) {
|
|
const struct ksz_chip_data *chip = &ksz9477_switch_chips[i];
|
|
|
|
if (dev->chip_id == chip->chip_id) {
|
|
dev->name = chip->dev_name;
|
|
dev->num_vlans = chip->num_vlans;
|
|
dev->num_alus = chip->num_alus;
|
|
dev->num_statics = chip->num_statics;
|
|
dev->port_cnt = chip->port_cnt;
|
|
dev->cpu_ports = chip->cpu_ports;
|
|
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* no switch found */
|
|
if (!dev->port_cnt)
|
|
return -ENODEV;
|
|
|
|
dev->port_mask = (1 << dev->port_cnt) - 1;
|
|
|
|
dev->reg_mib_cnt = SWITCH_COUNTER_NUM;
|
|
dev->mib_cnt = TOTAL_SWITCH_COUNTER_NUM;
|
|
|
|
i = dev->mib_port_cnt;
|
|
dev->ports = devm_kzalloc(dev->dev, sizeof(struct ksz_port) * i,
|
|
GFP_KERNEL);
|
|
if (!dev->ports)
|
|
return -ENOMEM;
|
|
for (i = 0; i < dev->mib_port_cnt; i++) {
|
|
dev->ports[i].mib.counters =
|
|
devm_kzalloc(dev->dev,
|
|
sizeof(u64) *
|
|
(TOTAL_SWITCH_COUNTER_NUM + 1),
|
|
GFP_KERNEL);
|
|
if (!dev->ports[i].mib.counters)
|
|
return -ENOMEM;
|
|
}
|
|
dev->interface = PHY_INTERFACE_MODE_RGMII_TXID;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ksz9477_switch_exit(struct ksz_device *dev)
|
|
{
|
|
ksz9477_reset_switch(dev);
|
|
}
|
|
|
|
static const struct ksz_dev_ops ksz9477_dev_ops = {
|
|
.get_port_addr = ksz9477_get_port_addr,
|
|
.cfg_port_member = ksz9477_cfg_port_member,
|
|
.flush_dyn_mac_table = ksz9477_flush_dyn_mac_table,
|
|
.port_setup = ksz9477_port_setup,
|
|
.shutdown = ksz9477_reset_switch,
|
|
.detect = ksz9477_switch_detect,
|
|
.init = ksz9477_switch_init,
|
|
.exit = ksz9477_switch_exit,
|
|
};
|
|
|
|
int ksz9477_switch_register(struct ksz_device *dev)
|
|
{
|
|
return ksz_switch_register(dev, &ksz9477_dev_ops);
|
|
}
|
|
EXPORT_SYMBOL(ksz9477_switch_register);
|
|
|
|
MODULE_AUTHOR("Woojung Huh <Woojung.Huh@microchip.com>");
|
|
MODULE_DESCRIPTION("Microchip KSZ9477 Series Switch DSA Driver");
|
|
MODULE_LICENSE("GPL");
|