OpenCloudOS-Kernel/arch/powerpc/boot/crt0.S

297 lines
6.7 KiB
ArmAsm

/* SPDX-License-Identifier: GPL-2.0-or-later */
/*
* Copyright (C) Paul Mackerras 1997.
*
* Adapted for 64 bit LE PowerPC by Andrew Tauferner
*/
#include "ppc_asm.h"
RELA = 7
RELACOUNT = 0x6ffffff9
.data
/* A procedure descriptor used when booting this as a COFF file.
* When making COFF, this comes first in the link and we're
* linked at 0x500000.
*/
.globl _zimage_start_opd
_zimage_start_opd:
.long 0x500000, 0, 0, 0
.text
b _zimage_start
#ifdef __powerpc64__
.balign 8
p_start: .8byte _start
p_etext: .8byte _etext
p_bss_start: .8byte __bss_start
p_end: .8byte _end
p_toc: .8byte __toc_start + 0x8000 - p_base
p_dyn: .8byte __dynamic_start - p_base
p_rela: .8byte __rela_dyn_start - p_base
p_prom: .8byte 0
.weak _platform_stack_top
p_pstack: .8byte _platform_stack_top
#else
p_start: .long _start
p_etext: .long _etext
p_bss_start: .long __bss_start
p_end: .long _end
.weak _platform_stack_top
p_pstack: .long _platform_stack_top
#endif
.weak _zimage_start
_zimage_start:
.globl _zimage_start_lib
_zimage_start_lib:
/* Work out the offset between the address we were linked at
and the address where we're running. */
bl .+4
p_base: mflr r10 /* r10 now points to runtime addr of p_base */
#ifndef __powerpc64__
/* grab the link address of the dynamic section in r11 */
addis r11,r10,(_GLOBAL_OFFSET_TABLE_-p_base)@ha
lwz r11,(_GLOBAL_OFFSET_TABLE_-p_base)@l(r11)
cmpwi r11,0
beq 3f /* if not linked -pie */
/* get the runtime address of the dynamic section in r12 */
.weak __dynamic_start
addis r12,r10,(__dynamic_start-p_base)@ha
addi r12,r12,(__dynamic_start-p_base)@l
subf r11,r11,r12 /* runtime - linktime offset */
/* The dynamic section contains a series of tagged entries.
* We need the RELA and RELACOUNT entries. */
li r9,0
li r0,0
9: lwz r8,0(r12) /* get tag */
cmpwi r8,0
beq 10f /* end of list */
cmpwi r8,RELA
bne 11f
lwz r9,4(r12) /* get RELA pointer in r9 */
b 12f
11: addis r8,r8,(-RELACOUNT)@ha
cmpwi r8,RELACOUNT@l
bne 12f
lwz r0,4(r12) /* get RELACOUNT value in r0 */
12: addi r12,r12,8
b 9b
/* The relocation section contains a list of relocations.
* We now do the R_PPC_RELATIVE ones, which point to words
* which need to be initialized with addend + offset.
* The R_PPC_RELATIVE ones come first and there are RELACOUNT
* of them. */
10: /* skip relocation if we don't have both */
cmpwi r0,0
beq 3f
cmpwi r9,0
beq 3f
add r9,r9,r11 /* Relocate RELA pointer */
mtctr r0
2: lbz r0,4+3(r9) /* ELF32_R_INFO(reloc->r_info) */
cmpwi r0,22 /* R_PPC_RELATIVE */
bne 3f
lwz r12,0(r9) /* reloc->r_offset */
lwz r0,8(r9) /* reloc->r_addend */
add r0,r0,r11
stwx r0,r11,r12
addi r9,r9,12
bdnz 2b
/* Do a cache flush for our text, in case the loader didn't */
3: lwz r9,p_start-p_base(r10) /* note: these are relocated now */
lwz r8,p_etext-p_base(r10)
4: dcbf r0,r9
icbi r0,r9
addi r9,r9,0x20
cmplw cr0,r9,r8
blt 4b
sync
isync
/* Clear the BSS */
lwz r9,p_bss_start-p_base(r10)
lwz r8,p_end-p_base(r10)
li r0,0
5: stw r0,0(r9)
addi r9,r9,4
cmplw cr0,r9,r8
blt 5b
/* Possibly set up a custom stack */
lwz r8,p_pstack-p_base(r10)
cmpwi r8,0
beq 6f
lwz r1,0(r8)
li r0,0
stwu r0,-16(r1) /* establish a stack frame */
6:
#else /* __powerpc64__ */
/* Save the prom pointer at p_prom. */
std r5,(p_prom-p_base)(r10)
/* Set r2 to the TOC. */
ld r2,(p_toc-p_base)(r10)
add r2,r2,r10
/* Grab the link address of the dynamic section in r11. */
ld r11,-32768(r2)
cmpwi r11,0
beq 3f /* if not linked -pie then no dynamic section */
ld r11,(p_dyn-p_base)(r10)
add r11,r11,r10
ld r9,(p_rela-p_base)(r10)
add r9,r9,r10
li r13,0
li r8,0
9: ld r12,0(r11) /* get tag */
cmpdi r12,0
beq 12f /* end of list */
cmpdi r12,RELA
bne 10f
ld r13,8(r11) /* get RELA pointer in r13 */
b 11f
10: addis r12,r12,(-RELACOUNT)@ha
cmpdi r12,RELACOUNT@l
bne 11f
ld r8,8(r11) /* get RELACOUNT value in r8 */
11: addi r11,r11,16
b 9b
12:
cmpdi r13,0 /* check we have both RELA and RELACOUNT */
cmpdi cr1,r8,0
beq 3f
beq cr1,3f
/* Calcuate the runtime offset. */
subf r13,r13,r9
/* Run through the list of relocations and process the
* R_PPC64_RELATIVE ones. */
mtctr r8
13: ld r0,8(r9) /* ELF64_R_TYPE(reloc->r_info) */
cmpdi r0,22 /* R_PPC64_RELATIVE */
bne 3f
ld r12,0(r9) /* reloc->r_offset */
ld r0,16(r9) /* reloc->r_addend */
add r0,r0,r13
stdx r0,r13,r12
addi r9,r9,24
bdnz 13b
/* Do a cache flush for our text, in case the loader didn't */
3: ld r9,p_start-p_base(r10) /* note: these are relocated now */
ld r8,p_etext-p_base(r10)
4: dcbf r0,r9
icbi r0,r9
addi r9,r9,0x20
cmpld cr0,r9,r8
blt 4b
sync
isync
/* Clear the BSS */
ld r9,p_bss_start-p_base(r10)
ld r8,p_end-p_base(r10)
li r0,0
5: std r0,0(r9)
addi r9,r9,8
cmpld cr0,r9,r8
blt 5b
/* Possibly set up a custom stack */
ld r8,p_pstack-p_base(r10)
cmpdi r8,0
beq 6f
ld r1,0(r8)
li r0,0
stdu r0,-112(r1) /* establish a stack frame */
6:
#endif /* __powerpc64__ */
/* Call platform_init() */
bl platform_init
/* Call start */
b start
#ifdef __powerpc64__
#define PROM_FRAME_SIZE 512
#define SAVE_GPR(n, base) std n,8*(n)(base)
#define REST_GPR(n, base) ld n,8*(n)(base)
#define SAVE_2GPRS(n, base) SAVE_GPR(n, base); SAVE_GPR(n+1, base)
#define SAVE_4GPRS(n, base) SAVE_2GPRS(n, base); SAVE_2GPRS(n+2, base)
#define SAVE_8GPRS(n, base) SAVE_4GPRS(n, base); SAVE_4GPRS(n+4, base)
#define SAVE_10GPRS(n, base) SAVE_8GPRS(n, base); SAVE_2GPRS(n+8, base)
#define REST_2GPRS(n, base) REST_GPR(n, base); REST_GPR(n+1, base)
#define REST_4GPRS(n, base) REST_2GPRS(n, base); REST_2GPRS(n+2, base)
#define REST_8GPRS(n, base) REST_4GPRS(n, base); REST_4GPRS(n+4, base)
#define REST_10GPRS(n, base) REST_8GPRS(n, base); REST_2GPRS(n+8, base)
/* prom handles the jump into and return from firmware. The prom args pointer
is loaded in r3. */
.globl prom
prom:
mflr r0
std r0,16(r1)
stdu r1,-PROM_FRAME_SIZE(r1) /* Save SP and create stack space */
SAVE_GPR(2, r1)
SAVE_GPR(13, r1)
SAVE_8GPRS(14, r1)
SAVE_10GPRS(22, r1)
mfcr r10
std r10,8*32(r1)
mfmsr r10
std r10,8*33(r1)
/* remove MSR_LE from msr but keep MSR_SF */
mfmsr r10
rldicr r10,r10,0,62
mtsrr1 r10
/* Load FW address, set LR to label 1, and jump to FW */
bl 0f
0: mflr r10
addi r11,r10,(1f-0b)
mtlr r11
ld r10,(p_prom-0b)(r10)
mtsrr0 r10
rfid
1: /* Return from OF */
FIXUP_ENDIAN
/* Restore registers and return. */
rldicl r1,r1,0,32
/* Restore the MSR (back to 64 bits) */
ld r10,8*(33)(r1)
mtmsr r10
isync
/* Restore other registers */
REST_GPR(2, r1)
REST_GPR(13, r1)
REST_8GPRS(14, r1)
REST_10GPRS(22, r1)
ld r10,8*32(r1)
mtcr r10
addi r1,r1,PROM_FRAME_SIZE
ld r0,16(r1)
mtlr r0
blr
#endif