OpenCloudOS-Kernel/drivers/usb/core
Eugeniu Rosca 76e1ef1d81 usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B
On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]:
> This patch prevents my Raven Ridge xHCI from getting runtime suspend.

The problem described in v5.6 commit 1208f9e1d7 ("USB: hub: Fix the
broken detection of USB3 device in SMSC hub") applies solely to the
USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board,
manufactured by Shimafuji Electric Inc [3].

Despite that, the aforementioned commit applied the quirk to _all_ hubs
carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than
initially expected. Consequently, the quirk is now enabled on platforms
carrying SMSC/Microchip hub models which potentially don't exhibit the
original issue.

To avoid reports like [1], further limit the quirk's scope to
USB5534B [2], by employing both Vendor and Product ID checks.

Tested on H3ULCB + Kingfisher rev. M05.

[1] https://lore.kernel.org/linux-renesas-soc/73933975-6F0E-40F5-9584-D2B8F615C0F3@canonical.com/
[2] https://www.microchip.com/wwwproducts/en/USB5534B
[3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf
[4] https://devicehunt.com/search/type/usb/vendor/0424/device/any

Fixes: 1208f9e1d7 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: stable@vger.kernel.org # v4.14+
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Hardik Gajjar <hgajjar@de.adit-jv.com>
Cc: linux-renesas-soc@vger.kernel.org
Cc: linux-usb@vger.kernel.org
Reported-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Eugeniu Rosca <erosca@de.adit-jv.com>
Tested-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20200514220246.13290-1-erosca@de.adit-jv.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-15 15:41:13 +02:00
..
Kconfig usb: remove redundant 'default n' from Kconfig-s 2019-05-21 10:06:22 +02:00
Makefile usb: core: add a wrapper for the USB PHYs on the HCD 2018-03-09 09:43:53 -08:00
buffer.c usb: add a hcd_uses_dma helper 2019-08-15 15:18:05 +02:00
config.c USB: core: clean up endpoint-descriptor parsing 2020-02-10 11:14:22 -08:00
devices.c Remove 'type' argument from access_ok() function 2019-01-03 18:57:57 -08:00
devio.c USB: usbfs: fix mmap dma mismatch 2020-05-14 18:39:57 +02:00
driver.c USB: Fallback to generic driver when specific driver fails 2020-02-12 11:01:55 -08:00
endpoint.c USB: core: move existing SPDX tags to top of the file 2017-11-03 10:12:26 +01:00
file.c USB: core: Fix races in character device registration and deregistraion 2019-08-12 22:47:24 +02:00
generic.c USB: Fallback to generic driver when specific driver fails 2020-02-12 11:01:55 -08:00
hcd-pci.c remove ioremap_nocache and devm_ioremap_nocache 2020-01-06 09:45:59 +01:00
hcd.c USB: Fix incorrect DMA allocations for local memory pool drivers 2019-12-11 09:06:41 +01:00
hub.c usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B 2020-05-15 15:41:13 +02:00
hub.h USB: hub: Fix the broken detection of USB3 device in SMSC hub 2020-02-10 11:08:26 -08:00
ledtrig-usbport.c USB: leds: fix regression in usbport led trigger 2019-01-18 09:55:05 +01:00
message.c USB: core: Fix misleading driver bug report 2020-05-05 13:06:45 +02:00
notify.c USB: core: Remove usbfs_mutex 2019-06-26 10:28:09 +08:00
of.c usb: Change usb_of_get_companion_dev() place to usb/common 2018-09-10 20:40:29 +02:00
otg_whitelist.h USB: core: Remove redundant license text 2017-11-04 11:55:39 +01:00
phy.c usb: core: phy: add support for PHY calibration 2019-09-03 15:54:55 +02:00
phy.h usb: core: phy: add support for PHY calibration 2019-09-03 15:54:55 +02:00
port.c usb: core: port: do error out if usb_autopm_get_interface() fails 2020-03-04 10:58:16 +01:00
quirks.c USB: Add USB_QUIRK_DELAY_CTRL_MSG and USB_QUIRK_DELAY_INIT for Corsair K70 RGB RAPIDFIRE 2020-04-16 15:27:52 +02:00
sysfs.c usb: use kobj_to_dev() API 2020-02-14 08:38:15 -08:00
urb.c usb: core: urb: fix URB structure initialization function 2019-12-10 11:41:19 +01:00
usb-acpi.c usb: core: Use ACPI_SUCCESS() at appropriate places 2020-02-19 11:08:52 +01:00
usb.c usb: remove commented out dma wrappers 2019-09-03 15:26:12 +02:00
usb.h Merge 5.6-rc3 into usb-next 2020-02-24 08:48:49 +01:00