432 lines
12 KiB
C
432 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* HID Sensors Driver
|
|
* Copyright (c) 2013, Intel Corporation.
|
|
*/
|
|
|
|
#include <linux/device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/module.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/hid-sensor-hub.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/iio/buffer.h>
|
|
#include <linux/iio/trigger_consumer.h>
|
|
#include <linux/iio/triggered_buffer.h>
|
|
#include "../common/hid-sensors/hid-sensor-trigger.h"
|
|
|
|
enum incl_3d_channel {
|
|
CHANNEL_SCAN_INDEX_X,
|
|
CHANNEL_SCAN_INDEX_Y,
|
|
CHANNEL_SCAN_INDEX_Z,
|
|
INCLI_3D_CHANNEL_MAX,
|
|
};
|
|
|
|
struct incl_3d_state {
|
|
struct hid_sensor_hub_callbacks callbacks;
|
|
struct hid_sensor_common common_attributes;
|
|
struct hid_sensor_hub_attribute_info incl[INCLI_3D_CHANNEL_MAX];
|
|
u32 incl_val[INCLI_3D_CHANNEL_MAX];
|
|
int scale_pre_decml;
|
|
int scale_post_decml;
|
|
int scale_precision;
|
|
int value_offset;
|
|
};
|
|
|
|
static const u32 incl_3d_addresses[INCLI_3D_CHANNEL_MAX] = {
|
|
HID_USAGE_SENSOR_ORIENT_TILT_X,
|
|
HID_USAGE_SENSOR_ORIENT_TILT_Y,
|
|
HID_USAGE_SENSOR_ORIENT_TILT_Z
|
|
};
|
|
|
|
/* Channel definitions */
|
|
static const struct iio_chan_spec incl_3d_channels[] = {
|
|
{
|
|
.type = IIO_INCLI,
|
|
.modified = 1,
|
|
.channel2 = IIO_MOD_X,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
|
|
BIT(IIO_CHAN_INFO_HYSTERESIS),
|
|
.scan_index = CHANNEL_SCAN_INDEX_X,
|
|
}, {
|
|
.type = IIO_INCLI,
|
|
.modified = 1,
|
|
.channel2 = IIO_MOD_Y,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
|
|
BIT(IIO_CHAN_INFO_HYSTERESIS),
|
|
.scan_index = CHANNEL_SCAN_INDEX_Y,
|
|
}, {
|
|
.type = IIO_INCLI,
|
|
.modified = 1,
|
|
.channel2 = IIO_MOD_Z,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
|
|
BIT(IIO_CHAN_INFO_SCALE) |
|
|
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
|
|
BIT(IIO_CHAN_INFO_HYSTERESIS),
|
|
.scan_index = CHANNEL_SCAN_INDEX_Z,
|
|
}
|
|
};
|
|
|
|
/* Adjust channel real bits based on report descriptor */
|
|
static void incl_3d_adjust_channel_bit_mask(struct iio_chan_spec *chan,
|
|
int size)
|
|
{
|
|
chan->scan_type.sign = 's';
|
|
/* Real storage bits will change based on the report desc. */
|
|
chan->scan_type.realbits = size * 8;
|
|
/* Maximum size of a sample to capture is u32 */
|
|
chan->scan_type.storagebits = sizeof(u32) * 8;
|
|
}
|
|
|
|
/* Channel read_raw handler */
|
|
static int incl_3d_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2,
|
|
long mask)
|
|
{
|
|
struct incl_3d_state *incl_state = iio_priv(indio_dev);
|
|
int report_id = -1;
|
|
u32 address;
|
|
int ret_type;
|
|
s32 min;
|
|
|
|
*val = 0;
|
|
*val2 = 0;
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
hid_sensor_power_state(&incl_state->common_attributes, true);
|
|
report_id = incl_state->incl[chan->scan_index].report_id;
|
|
min = incl_state->incl[chan->scan_index].logical_minimum;
|
|
address = incl_3d_addresses[chan->scan_index];
|
|
if (report_id >= 0)
|
|
*val = sensor_hub_input_attr_get_raw_value(
|
|
incl_state->common_attributes.hsdev,
|
|
HID_USAGE_SENSOR_INCLINOMETER_3D, address,
|
|
report_id,
|
|
SENSOR_HUB_SYNC,
|
|
min < 0);
|
|
else {
|
|
hid_sensor_power_state(&incl_state->common_attributes,
|
|
false);
|
|
return -EINVAL;
|
|
}
|
|
hid_sensor_power_state(&incl_state->common_attributes, false);
|
|
ret_type = IIO_VAL_INT;
|
|
break;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = incl_state->scale_pre_decml;
|
|
*val2 = incl_state->scale_post_decml;
|
|
ret_type = incl_state->scale_precision;
|
|
break;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
*val = incl_state->value_offset;
|
|
ret_type = IIO_VAL_INT;
|
|
break;
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret_type = hid_sensor_read_samp_freq_value(
|
|
&incl_state->common_attributes, val, val2);
|
|
break;
|
|
case IIO_CHAN_INFO_HYSTERESIS:
|
|
ret_type = hid_sensor_read_raw_hyst_value(
|
|
&incl_state->common_attributes, val, val2);
|
|
break;
|
|
default:
|
|
ret_type = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret_type;
|
|
}
|
|
|
|
/* Channel write_raw handler */
|
|
static int incl_3d_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
struct incl_3d_state *incl_state = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_SAMP_FREQ:
|
|
ret = hid_sensor_write_samp_freq_value(
|
|
&incl_state->common_attributes, val, val2);
|
|
break;
|
|
case IIO_CHAN_INFO_HYSTERESIS:
|
|
ret = hid_sensor_write_raw_hyst_value(
|
|
&incl_state->common_attributes, val, val2);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info incl_3d_info = {
|
|
.read_raw = &incl_3d_read_raw,
|
|
.write_raw = &incl_3d_write_raw,
|
|
};
|
|
|
|
/* Function to push data to buffer */
|
|
static void hid_sensor_push_data(struct iio_dev *indio_dev, u8 *data, int len)
|
|
{
|
|
dev_dbg(&indio_dev->dev, "hid_sensor_push_data\n");
|
|
iio_push_to_buffers(indio_dev, (u8 *)data);
|
|
}
|
|
|
|
/* Callback handler to send event after all samples are received and captured */
|
|
static int incl_3d_proc_event(struct hid_sensor_hub_device *hsdev,
|
|
unsigned usage_id,
|
|
void *priv)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(priv);
|
|
struct incl_3d_state *incl_state = iio_priv(indio_dev);
|
|
|
|
dev_dbg(&indio_dev->dev, "incl_3d_proc_event\n");
|
|
if (atomic_read(&incl_state->common_attributes.data_ready))
|
|
hid_sensor_push_data(indio_dev,
|
|
(u8 *)incl_state->incl_val,
|
|
sizeof(incl_state->incl_val));
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Capture samples in local storage */
|
|
static int incl_3d_capture_sample(struct hid_sensor_hub_device *hsdev,
|
|
unsigned usage_id,
|
|
size_t raw_len, char *raw_data,
|
|
void *priv)
|
|
{
|
|
struct iio_dev *indio_dev = platform_get_drvdata(priv);
|
|
struct incl_3d_state *incl_state = iio_priv(indio_dev);
|
|
int ret = 0;
|
|
|
|
switch (usage_id) {
|
|
case HID_USAGE_SENSOR_ORIENT_TILT_X:
|
|
incl_state->incl_val[CHANNEL_SCAN_INDEX_X] = *(u32 *)raw_data;
|
|
break;
|
|
case HID_USAGE_SENSOR_ORIENT_TILT_Y:
|
|
incl_state->incl_val[CHANNEL_SCAN_INDEX_Y] = *(u32 *)raw_data;
|
|
break;
|
|
case HID_USAGE_SENSOR_ORIENT_TILT_Z:
|
|
incl_state->incl_val[CHANNEL_SCAN_INDEX_Z] = *(u32 *)raw_data;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/* Parse report which is specific to an usage id*/
|
|
static int incl_3d_parse_report(struct platform_device *pdev,
|
|
struct hid_sensor_hub_device *hsdev,
|
|
struct iio_chan_spec *channels,
|
|
unsigned usage_id,
|
|
struct incl_3d_state *st)
|
|
{
|
|
int ret;
|
|
|
|
ret = sensor_hub_input_get_attribute_info(hsdev,
|
|
HID_INPUT_REPORT,
|
|
usage_id,
|
|
HID_USAGE_SENSOR_ORIENT_TILT_X,
|
|
&st->incl[CHANNEL_SCAN_INDEX_X]);
|
|
if (ret)
|
|
return ret;
|
|
incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_X],
|
|
st->incl[CHANNEL_SCAN_INDEX_X].size);
|
|
|
|
ret = sensor_hub_input_get_attribute_info(hsdev,
|
|
HID_INPUT_REPORT,
|
|
usage_id,
|
|
HID_USAGE_SENSOR_ORIENT_TILT_Y,
|
|
&st->incl[CHANNEL_SCAN_INDEX_Y]);
|
|
if (ret)
|
|
return ret;
|
|
incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_Y],
|
|
st->incl[CHANNEL_SCAN_INDEX_Y].size);
|
|
|
|
ret = sensor_hub_input_get_attribute_info(hsdev,
|
|
HID_INPUT_REPORT,
|
|
usage_id,
|
|
HID_USAGE_SENSOR_ORIENT_TILT_Z,
|
|
&st->incl[CHANNEL_SCAN_INDEX_Z]);
|
|
if (ret)
|
|
return ret;
|
|
incl_3d_adjust_channel_bit_mask(&channels[CHANNEL_SCAN_INDEX_Z],
|
|
st->incl[CHANNEL_SCAN_INDEX_Z].size);
|
|
|
|
dev_dbg(&pdev->dev, "incl_3d %x:%x, %x:%x, %x:%x\n",
|
|
st->incl[0].index,
|
|
st->incl[0].report_id,
|
|
st->incl[1].index, st->incl[1].report_id,
|
|
st->incl[2].index, st->incl[2].report_id);
|
|
|
|
st->scale_precision = hid_sensor_format_scale(
|
|
HID_USAGE_SENSOR_INCLINOMETER_3D,
|
|
&st->incl[CHANNEL_SCAN_INDEX_X],
|
|
&st->scale_pre_decml, &st->scale_post_decml);
|
|
|
|
/* Set Sensitivity field ids, when there is no individual modifier */
|
|
if (st->common_attributes.sensitivity.index < 0) {
|
|
sensor_hub_input_get_attribute_info(hsdev,
|
|
HID_FEATURE_REPORT, usage_id,
|
|
HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
|
|
HID_USAGE_SENSOR_DATA_ORIENTATION,
|
|
&st->common_attributes.sensitivity);
|
|
dev_dbg(&pdev->dev, "Sensitivity index:report %d:%d\n",
|
|
st->common_attributes.sensitivity.index,
|
|
st->common_attributes.sensitivity.report_id);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
/* Function to initialize the processing for usage id */
|
|
static int hid_incl_3d_probe(struct platform_device *pdev)
|
|
{
|
|
int ret;
|
|
static char *name = "incli_3d";
|
|
struct iio_dev *indio_dev;
|
|
struct incl_3d_state *incl_state;
|
|
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
|
|
|
|
indio_dev = devm_iio_device_alloc(&pdev->dev,
|
|
sizeof(struct incl_3d_state));
|
|
if (indio_dev == NULL)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
|
|
incl_state = iio_priv(indio_dev);
|
|
incl_state->common_attributes.hsdev = hsdev;
|
|
incl_state->common_attributes.pdev = pdev;
|
|
|
|
ret = hid_sensor_parse_common_attributes(hsdev,
|
|
HID_USAGE_SENSOR_INCLINOMETER_3D,
|
|
&incl_state->common_attributes);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to setup common attributes\n");
|
|
return ret;
|
|
}
|
|
|
|
indio_dev->channels = kmemdup(incl_3d_channels,
|
|
sizeof(incl_3d_channels), GFP_KERNEL);
|
|
if (!indio_dev->channels) {
|
|
dev_err(&pdev->dev, "failed to duplicate channels\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ret = incl_3d_parse_report(pdev, hsdev,
|
|
(struct iio_chan_spec *)indio_dev->channels,
|
|
HID_USAGE_SENSOR_INCLINOMETER_3D,
|
|
incl_state);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to setup attributes\n");
|
|
goto error_free_dev_mem;
|
|
}
|
|
|
|
indio_dev->num_channels = ARRAY_SIZE(incl_3d_channels);
|
|
indio_dev->dev.parent = &pdev->dev;
|
|
indio_dev->info = &incl_3d_info;
|
|
indio_dev->name = name;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time,
|
|
NULL, NULL);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "failed to initialize trigger buffer\n");
|
|
goto error_free_dev_mem;
|
|
}
|
|
atomic_set(&incl_state->common_attributes.data_ready, 0);
|
|
ret = hid_sensor_setup_trigger(indio_dev, name,
|
|
&incl_state->common_attributes);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "trigger setup failed\n");
|
|
goto error_unreg_buffer_funcs;
|
|
}
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "device register failed\n");
|
|
goto error_remove_trigger;
|
|
}
|
|
|
|
incl_state->callbacks.send_event = incl_3d_proc_event;
|
|
incl_state->callbacks.capture_sample = incl_3d_capture_sample;
|
|
incl_state->callbacks.pdev = pdev;
|
|
ret = sensor_hub_register_callback(hsdev,
|
|
HID_USAGE_SENSOR_INCLINOMETER_3D,
|
|
&incl_state->callbacks);
|
|
if (ret) {
|
|
dev_err(&pdev->dev, "callback reg failed\n");
|
|
goto error_iio_unreg;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error_iio_unreg:
|
|
iio_device_unregister(indio_dev);
|
|
error_remove_trigger:
|
|
hid_sensor_remove_trigger(&incl_state->common_attributes);
|
|
error_unreg_buffer_funcs:
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
error_free_dev_mem:
|
|
kfree(indio_dev->channels);
|
|
return ret;
|
|
}
|
|
|
|
/* Function to deinitialize the processing for usage id */
|
|
static int hid_incl_3d_remove(struct platform_device *pdev)
|
|
{
|
|
struct hid_sensor_hub_device *hsdev = pdev->dev.platform_data;
|
|
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
|
|
struct incl_3d_state *incl_state = iio_priv(indio_dev);
|
|
|
|
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_INCLINOMETER_3D);
|
|
iio_device_unregister(indio_dev);
|
|
hid_sensor_remove_trigger(&incl_state->common_attributes);
|
|
iio_triggered_buffer_cleanup(indio_dev);
|
|
kfree(indio_dev->channels);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct platform_device_id hid_incl_3d_ids[] = {
|
|
{
|
|
/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
|
|
.name = "HID-SENSOR-200086",
|
|
},
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(platform, hid_incl_3d_ids);
|
|
|
|
static struct platform_driver hid_incl_3d_platform_driver = {
|
|
.id_table = hid_incl_3d_ids,
|
|
.driver = {
|
|
.name = KBUILD_MODNAME,
|
|
.pm = &hid_sensor_pm_ops,
|
|
},
|
|
.probe = hid_incl_3d_probe,
|
|
.remove = hid_incl_3d_remove,
|
|
};
|
|
module_platform_driver(hid_incl_3d_platform_driver);
|
|
|
|
MODULE_DESCRIPTION("HID Sensor Inclinometer 3D");
|
|
MODULE_AUTHOR("Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>");
|
|
MODULE_LICENSE("GPL");
|