376 lines
9.4 KiB
C
376 lines
9.4 KiB
C
// SPDX-License-Identifier: GPL-2.0-only
|
|
/*
|
|
* IIO driver for the Apex Embedded Systems STX104
|
|
* Copyright (C) 2016 William Breathitt Gray
|
|
*/
|
|
#include <linux/bitops.h>
|
|
#include <linux/device.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/gpio/driver.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/types.h>
|
|
#include <linux/io.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/isa.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/moduleparam.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#define STX104_OUT_CHAN(chan) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.channel = chan, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.indexed = 1, \
|
|
.output = 1 \
|
|
}
|
|
#define STX104_IN_CHAN(chan, diff) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.channel = chan, \
|
|
.channel2 = chan, \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_HARDWAREGAIN) | \
|
|
BIT(IIO_CHAN_INFO_OFFSET) | BIT(IIO_CHAN_INFO_SCALE), \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.indexed = 1, \
|
|
.differential = diff \
|
|
}
|
|
|
|
#define STX104_NUM_OUT_CHAN 2
|
|
|
|
#define STX104_EXTENT 16
|
|
|
|
static unsigned int base[max_num_isa_dev(STX104_EXTENT)];
|
|
static unsigned int num_stx104;
|
|
module_param_hw_array(base, uint, ioport, &num_stx104, 0);
|
|
MODULE_PARM_DESC(base, "Apex Embedded Systems STX104 base addresses");
|
|
|
|
/**
|
|
* struct stx104_iio - IIO device private data structure
|
|
* @chan_out_states: channels' output states
|
|
* @base: base port address of the IIO device
|
|
*/
|
|
struct stx104_iio {
|
|
unsigned int chan_out_states[STX104_NUM_OUT_CHAN];
|
|
unsigned int base;
|
|
};
|
|
|
|
/**
|
|
* struct stx104_gpio - GPIO device private data structure
|
|
* @chip: instance of the gpio_chip
|
|
* @lock: synchronization lock to prevent I/O race conditions
|
|
* @base: base port address of the GPIO device
|
|
* @out_state: output bits state
|
|
*/
|
|
struct stx104_gpio {
|
|
struct gpio_chip chip;
|
|
spinlock_t lock;
|
|
unsigned int base;
|
|
unsigned int out_state;
|
|
};
|
|
|
|
static int stx104_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int *val, int *val2, long mask)
|
|
{
|
|
struct stx104_iio *const priv = iio_priv(indio_dev);
|
|
unsigned int adc_config;
|
|
int adbu;
|
|
int gain;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_HARDWAREGAIN:
|
|
/* get gain configuration */
|
|
adc_config = inb(priv->base + 11);
|
|
gain = adc_config & 0x3;
|
|
|
|
*val = 1 << gain;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (chan->output) {
|
|
*val = priv->chan_out_states[chan->channel];
|
|
return IIO_VAL_INT;
|
|
}
|
|
|
|
/* select ADC channel */
|
|
outb(chan->channel | (chan->channel << 4), priv->base + 2);
|
|
|
|
/* trigger ADC sample capture and wait for completion */
|
|
outb(0, priv->base);
|
|
while (inb(priv->base + 8) & BIT(7));
|
|
|
|
*val = inw(priv->base);
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_OFFSET:
|
|
/* get ADC bipolar/unipolar configuration */
|
|
adc_config = inb(priv->base + 11);
|
|
adbu = !(adc_config & BIT(2));
|
|
|
|
*val = -32768 * adbu;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
/* get ADC bipolar/unipolar and gain configuration */
|
|
adc_config = inb(priv->base + 11);
|
|
adbu = !(adc_config & BIT(2));
|
|
gain = adc_config & 0x3;
|
|
|
|
*val = 5;
|
|
*val2 = 15 - adbu + gain;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int stx104_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan, int val, int val2, long mask)
|
|
{
|
|
struct stx104_iio *const priv = iio_priv(indio_dev);
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_HARDWAREGAIN:
|
|
/* Only four gain states (x1, x2, x4, x8) */
|
|
switch (val) {
|
|
case 1:
|
|
outb(0, priv->base + 11);
|
|
break;
|
|
case 2:
|
|
outb(1, priv->base + 11);
|
|
break;
|
|
case 4:
|
|
outb(2, priv->base + 11);
|
|
break;
|
|
case 8:
|
|
outb(3, priv->base + 11);
|
|
break;
|
|
default:
|
|
return -EINVAL;
|
|
}
|
|
|
|
return 0;
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (chan->output) {
|
|
/* DAC can only accept up to a 16-bit value */
|
|
if ((unsigned int)val > 65535)
|
|
return -EINVAL;
|
|
|
|
priv->chan_out_states[chan->channel] = val;
|
|
outw(val, priv->base + 4 + 2 * chan->channel);
|
|
|
|
return 0;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static const struct iio_info stx104_info = {
|
|
.read_raw = stx104_read_raw,
|
|
.write_raw = stx104_write_raw
|
|
};
|
|
|
|
/* single-ended input channels configuration */
|
|
static const struct iio_chan_spec stx104_channels_sing[] = {
|
|
STX104_OUT_CHAN(0), STX104_OUT_CHAN(1),
|
|
STX104_IN_CHAN(0, 0), STX104_IN_CHAN(1, 0), STX104_IN_CHAN(2, 0),
|
|
STX104_IN_CHAN(3, 0), STX104_IN_CHAN(4, 0), STX104_IN_CHAN(5, 0),
|
|
STX104_IN_CHAN(6, 0), STX104_IN_CHAN(7, 0), STX104_IN_CHAN(8, 0),
|
|
STX104_IN_CHAN(9, 0), STX104_IN_CHAN(10, 0), STX104_IN_CHAN(11, 0),
|
|
STX104_IN_CHAN(12, 0), STX104_IN_CHAN(13, 0), STX104_IN_CHAN(14, 0),
|
|
STX104_IN_CHAN(15, 0)
|
|
};
|
|
/* differential input channels configuration */
|
|
static const struct iio_chan_spec stx104_channels_diff[] = {
|
|
STX104_OUT_CHAN(0), STX104_OUT_CHAN(1),
|
|
STX104_IN_CHAN(0, 1), STX104_IN_CHAN(1, 1), STX104_IN_CHAN(2, 1),
|
|
STX104_IN_CHAN(3, 1), STX104_IN_CHAN(4, 1), STX104_IN_CHAN(5, 1),
|
|
STX104_IN_CHAN(6, 1), STX104_IN_CHAN(7, 1)
|
|
};
|
|
|
|
static int stx104_gpio_get_direction(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
/* GPIO 0-3 are input only, while the rest are output only */
|
|
if (offset < 4)
|
|
return 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stx104_gpio_direction_input(struct gpio_chip *chip,
|
|
unsigned int offset)
|
|
{
|
|
if (offset >= 4)
|
|
return -EINVAL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int stx104_gpio_direction_output(struct gpio_chip *chip,
|
|
unsigned int offset, int value)
|
|
{
|
|
if (offset < 4)
|
|
return -EINVAL;
|
|
|
|
chip->set(chip, offset, value);
|
|
return 0;
|
|
}
|
|
|
|
static int stx104_gpio_get(struct gpio_chip *chip, unsigned int offset)
|
|
{
|
|
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
|
|
|
|
if (offset >= 4)
|
|
return -EINVAL;
|
|
|
|
return !!(inb(stx104gpio->base) & BIT(offset));
|
|
}
|
|
|
|
static int stx104_gpio_get_multiple(struct gpio_chip *chip, unsigned long *mask,
|
|
unsigned long *bits)
|
|
{
|
|
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
|
|
|
|
*bits = inb(stx104gpio->base);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void stx104_gpio_set(struct gpio_chip *chip, unsigned int offset,
|
|
int value)
|
|
{
|
|
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
|
|
const unsigned int mask = BIT(offset) >> 4;
|
|
unsigned long flags;
|
|
|
|
if (offset < 4)
|
|
return;
|
|
|
|
spin_lock_irqsave(&stx104gpio->lock, flags);
|
|
|
|
if (value)
|
|
stx104gpio->out_state |= mask;
|
|
else
|
|
stx104gpio->out_state &= ~mask;
|
|
|
|
outb(stx104gpio->out_state, stx104gpio->base);
|
|
|
|
spin_unlock_irqrestore(&stx104gpio->lock, flags);
|
|
}
|
|
|
|
#define STX104_NGPIO 8
|
|
static const char *stx104_names[STX104_NGPIO] = {
|
|
"DIN0", "DIN1", "DIN2", "DIN3", "DOUT0", "DOUT1", "DOUT2", "DOUT3"
|
|
};
|
|
|
|
static void stx104_gpio_set_multiple(struct gpio_chip *chip,
|
|
unsigned long *mask, unsigned long *bits)
|
|
{
|
|
struct stx104_gpio *const stx104gpio = gpiochip_get_data(chip);
|
|
unsigned long flags;
|
|
|
|
/* verify masked GPIO are output */
|
|
if (!(*mask & 0xF0))
|
|
return;
|
|
|
|
*mask >>= 4;
|
|
*bits >>= 4;
|
|
|
|
spin_lock_irqsave(&stx104gpio->lock, flags);
|
|
|
|
stx104gpio->out_state &= ~*mask;
|
|
stx104gpio->out_state |= *mask & *bits;
|
|
outb(stx104gpio->out_state, stx104gpio->base);
|
|
|
|
spin_unlock_irqrestore(&stx104gpio->lock, flags);
|
|
}
|
|
|
|
static int stx104_probe(struct device *dev, unsigned int id)
|
|
{
|
|
struct iio_dev *indio_dev;
|
|
struct stx104_iio *priv;
|
|
struct stx104_gpio *stx104gpio;
|
|
int err;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*priv));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
stx104gpio = devm_kzalloc(dev, sizeof(*stx104gpio), GFP_KERNEL);
|
|
if (!stx104gpio)
|
|
return -ENOMEM;
|
|
|
|
if (!devm_request_region(dev, base[id], STX104_EXTENT,
|
|
dev_name(dev))) {
|
|
dev_err(dev, "Unable to lock port addresses (0x%X-0x%X)\n",
|
|
base[id], base[id] + STX104_EXTENT);
|
|
return -EBUSY;
|
|
}
|
|
|
|
indio_dev->info = &stx104_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
|
|
/* determine if differential inputs */
|
|
if (inb(base[id] + 8) & BIT(5)) {
|
|
indio_dev->num_channels = ARRAY_SIZE(stx104_channels_diff);
|
|
indio_dev->channels = stx104_channels_diff;
|
|
} else {
|
|
indio_dev->num_channels = ARRAY_SIZE(stx104_channels_sing);
|
|
indio_dev->channels = stx104_channels_sing;
|
|
}
|
|
|
|
indio_dev->name = dev_name(dev);
|
|
indio_dev->dev.parent = dev;
|
|
|
|
priv = iio_priv(indio_dev);
|
|
priv->base = base[id];
|
|
|
|
/* configure device for software trigger operation */
|
|
outb(0, base[id] + 9);
|
|
|
|
/* initialize gain setting to x1 */
|
|
outb(0, base[id] + 11);
|
|
|
|
/* initialize DAC output to 0V */
|
|
outw(0, base[id] + 4);
|
|
outw(0, base[id] + 6);
|
|
|
|
stx104gpio->chip.label = dev_name(dev);
|
|
stx104gpio->chip.parent = dev;
|
|
stx104gpio->chip.owner = THIS_MODULE;
|
|
stx104gpio->chip.base = -1;
|
|
stx104gpio->chip.ngpio = STX104_NGPIO;
|
|
stx104gpio->chip.names = stx104_names;
|
|
stx104gpio->chip.get_direction = stx104_gpio_get_direction;
|
|
stx104gpio->chip.direction_input = stx104_gpio_direction_input;
|
|
stx104gpio->chip.direction_output = stx104_gpio_direction_output;
|
|
stx104gpio->chip.get = stx104_gpio_get;
|
|
stx104gpio->chip.get_multiple = stx104_gpio_get_multiple;
|
|
stx104gpio->chip.set = stx104_gpio_set;
|
|
stx104gpio->chip.set_multiple = stx104_gpio_set_multiple;
|
|
stx104gpio->base = base[id] + 3;
|
|
stx104gpio->out_state = 0x0;
|
|
|
|
spin_lock_init(&stx104gpio->lock);
|
|
|
|
err = devm_gpiochip_add_data(dev, &stx104gpio->chip, stx104gpio);
|
|
if (err) {
|
|
dev_err(dev, "GPIO registering failed (%d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
return devm_iio_device_register(dev, indio_dev);
|
|
}
|
|
|
|
static struct isa_driver stx104_driver = {
|
|
.probe = stx104_probe,
|
|
.driver = {
|
|
.name = "stx104"
|
|
},
|
|
};
|
|
|
|
module_isa_driver(stx104_driver, num_stx104);
|
|
|
|
MODULE_AUTHOR("William Breathitt Gray <vilhelm.gray@gmail.com>");
|
|
MODULE_DESCRIPTION("Apex Embedded Systems STX104 IIO driver");
|
|
MODULE_LICENSE("GPL v2");
|